5019 100 75057
AKB 086
1.
Control panel.
2.
Grease filter (inside the extractor grille).
3.
Lighting unit.
4.
Extractor grille.
REPLACING BULBS
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the extractor grille.
3.
Remove the burnt-out bulb.
Use 40W max E14 bulbs only.
4.
Remount the extractor grille.
REMOVING AND REPLACING OR
CLEANING THE GREASE FILTER
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the extractor grille (turn the side
knobs 90°).
3.
Remove the device fixing the grease filter.
4.
Remove the dirty grease filter.
5.
After replacing or cleaning the grease filter
(depends on model), remount in reverse
order, making sure the entire extraction
surface is covered.
FITTING OR RENEWING THE CARBON
FILTER
1.
Unplug the appliance or switch off the mains
power supply.
2.
Open the extractor grille.
3. Mounting:
Fit the carbon filter over the motor
protection grille - the reference mark (
a
) on
the edge of the carbon filter should line up
with the arrow on the fan shroud (
b
).
Turn clockwise.
Removing:
turn anti-clockwise.
4.
Remount the extractor grille.
CONTROL PANEL
A.
Speed selector
B.
Light switch.
C.
Extraction speed indicator.
2
3
1
3
4
B
A
90° 90°
medium amount of
steam and fumes
large amount of steam
and fumes
small amount of steam
and fumes
C
b
a
b
a
PRODUCT DESCRIPTION SHEET
F NL E PGBD GRI