9 GB/IE
order to prevent damage to the
device!
Before getting started
Note: Hold the UP button
2
or the DOWN
button
3
pressed down. This will speed up the
process of setting the values.
Inserting / replacing
the battery
The product is supplied with a battery already
in place. Before the first use, pull the battery
insulation strip out from between the battery
and the battery compartment
8
.
If the scales do not appear to work, check that
the battery has been inserted correctly and
reinsert it if necessary.
Note: The display indicates when it is time to
replace the battery. When you step on to the
scales and the battery is too weak, the LC dis-
play
1
shows „Lo“ and the scales switch off
automatically. If you see this message, replace
the exhausted battery with a new battery of
the same type. When you insert the battery,
make sure that the contacts do not get bent.
Bringing into use
Enter your personal data
1. F
or model 103803-14-01 / 103803-14-02: Pre
ss
the SET button
6
to switch on the scales. Press
the SET button again to set your personal data.
For model Z31332B: Press the ON / OFF but-
ton
9
to switch on the scales. Then press the
SET button
6
to set your personal data.
Note: The User ID
16
will flash in the LC dis-
play
1
. The number stands for the data profile
of one person from the user group.
2. Press the UP button
2
or the DOWN button
3
to select the data profile (1–12).
3. Press the SET button to confirm the selected
data profile as well as to set the option of the
sex
18
/
19
and the athlete mode
17
.
4. Press the UP button
2
or the DOWN button
3
to select your sex and the athlete mode.
Note: The athlete mode is a setting for sporty,
highly trained or muscular persons.
5. Press the SET button
6
to confirm your entry.
6. Now make the further settings. Repeat steps
4 and 5 to set the age
23
, height
20
and
weighting unit
11
/
12
/
13
.
After you have made the settings, the display will
return automatically to the selection of the User ID.
You can either make settings for further users or
measure your body weight.
Note: The scales switch off automatically after
about 10 seconds if they are not used.
Use
Measuring the body weight
Tip: Weigh yourself at the same time of day (pref-
erably in the morning) after visiting the toilet, with
an empty stomach and without clothing to ensure
that your results are compatible.
Place the scales down on a solid, flat horizontal
surface.
Step onto the platform
5
and do not move.
Moving during the weighing process can lead
to discrepancies in the results.
The scales will start to measure immediately.
After blinking twice, the weight display will show
the result.
Note: The scales are overloaded if the display
shows “Err”. Observe the maximum capacity
of 180 kg / 396 lbs / 28 st.
Step off the platform. The scales switch off
automatically after about 20 seconds. Until
then the weight measurement remains visible.
Note: The standard unit of weight is kilogram (kg).
The factory default setting for the scales as supplied
is “kg”. For model 103803-14-01 / 103803-14-02,