Sony PCV-RX690G Guide de référence

Marque: Sony

Modèle: PCV-RX690G

Catégorie: Équipement musical supplémentaire

Taper: Guide de référence

VAIO Digital Studio System Reference Manual

NOTICE

whole or in part without written permission is

software described herein, in whole or in part, may

not be reproduced, translated, or reduced to any

machine-readable form without prior written

approval.

SONY ELECTRONICS INC. PROVIDES NO

WARRANTY WITH REGARD TO THIS

MANUAL, THE SOFTWARE, OR OTHER

INFORMATION CONTAINED HEREIN AND

HEREBY EXPRESSLY DISCLAIMS ANY

IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR ANY

PARTICULAR PURPOSE WITH REGARD TO

THIS MANUAL, THE SOFTWARE, OR SUCH

OTHER INFORMATION. IN NO EVENT SHALL

SONY ELECTRONICS INC. BE LIABLE FOR

ANY INCIDENTAL, CONSEQUENTIAL, OR

SPECIAL DAMAGES, WHETHER BASED ON

TORT, CONTRACT, OR OTHERWISE, ARISING

OUT OF OR IN CONNECTION WITH THIS

MANUAL, THE SOFTWARE, OR OTHER

INFORMATION CONTAINED HEREIN OR THE

USE THEREOF.

Sony Electronics Inc. reserves the right to make any

modification to this manual or the information

contained herein at any time without notice. The

software described herein is governed by the terms

of a separate user license agreement.

This product contains software owned by Sony and

licensed by third parties. Use of such software is

subject to the terms and conditions of license

agreements enclosed with this product. Some of the

software may not be transported or used outside the

United States. Software specifications are subject to

change without notice and may not necessarily be

identical to current retail versions.

Updates and additions to software may require an

additional charge. Subscriptions to online service

providers may require a fee and credit card

information. Financial services may require prior

arrangements with participating financial

institutions.

Sony, VAIO, the VAIO logo, VAIO Smart, VAIO

Digital Studio, VisualFlow, Giga Pocket,

MovieShaker, DVgate, Media Bar, Handycam,

PictureGear and i.LINK are trademarks or

registered trademarks of Sony.

Memory Stick and are trademarks of

Sony Corporation.

Intel and Pentium are trademarks or registered

trademarks of the Intel Corporation. Microsoft,

Windows, the Windows logo and Windows XP are

trademarks or registered trademarks of the

Microsoft Corporation. PS/2 is a registered

trademark of the IBM Corporation.

All other trademarks are trademarks or registered

trademarks of their respective owners.

Owner’s Record

The model number and serial number are located on

either the front or back panel of your Sony VAIO

computer. Record the model and serial number in

the space provided here and keep in a secure

location. Refer to the model and serial numbers

when you call your Sony Service Center.

Model Number:

Serial Number:

iii

Safety Information and

Caution

Your computer’s installed optical drives may vary,

depending on the system configuration you have

purchased. See the Specifications sheet for details

on your installed optical drives.

DVD-RW Laser Diode Properties

DVD-ROM Laser Diode Properties

CD-RW Laser Diode Properties

CD-ROM Laser Diode Properties

❑ To prevent fire or shock hazard, do not expose

your desktop to rain or moisture. To avoid

electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only.

❑ Never install modem or telephone wiring

during a lightning storm.

❑ Never install telephone jacks in wet locations

unless the jack is specifically designed for

wet locations.

❑ Never touch uninsulated telephone wire or

terminals unless the telephone line has been

disconnected at the network interface.

❑ Use caution when installing or modifying

telephone lines.

❑ Avoid using the modem during an electrical

storm.

❑ Do not use the modem or a telephone to

report a gas leak in the vicinity of the leak.

❑ The socket outlet shall be installed near the

equipment and shall be easily accessible.

Laser Output

1.3 mW

(CD-Read)

1.1 mW

(DVD-Read)

42.3 mW

(DVD-Write)

21.9 mW

(CD-Write)

Wave Length

650-662 nm

(DVD)

773-797 nm

(CD)

Laser Output

0.55 mW

(DVD)

0.39 mW

(CD)

Wave Length

635-665 nm

(DVD)

770-810 nm

(CD)

Laser Output

2.0 mW (Read)

53.0 mW (Write)

Wave Length

778-790 nm

Laser Output

0.2 mW

Wave Length

760-810 nm

! To change the backup battery,

please contact your nearest Sony

Service Center.

! Caution—The use of optical

instruments with this product will

increase eye hazard. As the laser

beam used in this product is

harmful to the eyes, do not

attempt to disassemble the drive

cabinet. Refer servicing to

qualified personnel only.

! Danger—Visible and invisible laser

radiation when open. Avoid direct

exposure to beam.

! For DVD-RW: Danger—Visible laser

radiation when open. Avoid direct

exposure to beam.

! For CD-RW: Danger—Visible and

invisible laser radiation when

open. Avoid direct exposure to

beam.

VAIO Digital Studio System Reference Manual

❑ Pour prévenir tout risque d’incendie ou

d’électrocution, garder cet appareil à l’abri de

la pluie et de l’humidité.

❑ Pour prévenir tout risque d’électrocution, ne

pas ouvrir le châssis de cet appareil et ne

confier son entretien qu’à une personne

qualifiée.

❑ Ne jamais effectuer l’installation de fil

modem ou téléphone durant un orage

électrique.

❑ Ne jamais effectuer l’installation d’une prise

téléphonique dans un endroit mouillé à moins

que la prise soit conçue à cet effet.

❑ Ne jamais toucher un fil téléphonique à

découvert ou un terminal à moins que la ligne

téléphonique n’ait été débranché de

l’interface réseau.

❑ Soyez très prudent lorsque vous installez ou

modifiez les lignes téléphoniques.

❑ Évitez d’utiliser le modem durant un orage

électrique.

❑ N'utilisez pas le modem ni le téléphone pour

prévenir d'une fuite de gaz vous êtes près de

la fuite.

❑ L’appareil doit être le plus près possible

d’une prise murale pour en faciliter l’accès.

For questions regarding your product or for the

Sony Service Center nearest you, call

1-888-476-6972 in the United States or

1-800-961-7669 in Canada.

Sony Customer Support can be reached at

http://www.sony.com/pcsupport.

! Caution—For ADSL, HomePNA, and

V.90 modem models; to reduce the

risk of fire, use only No. 26 AWG or

larger telecommunication line

cord.

! Pour changer la pile de rechange,

veuillez contacter votre centre de

service Sony le plus près.

! Avertissement : L'utilisation

d'instruments optiques avec ce

produit augmente les risques pour

les yeux. Puisque le faisceau laser

utilisé dans ce produit est

dommageable pour les yeux, ne

tentez pas de désassembler le

boîtier. Adressez-vous à un agent

de service qualifié.

! Danger : Radiation laser visible et

invisible si ouvert. Évitez

l’exposition directe au faisceau.

! Pour les DVD-RW : Danger—

Radiation laser visible si ouvert.

Évitez l'exposition directe au

faisceau.

! Pour les CD-RW : Danger—

Radiation laser visible et invisible

si ouvert. Évitez l'exposition

directe au faisceau.

! Attention : Pour ADSL, HomePNA,

et V.90 modele modem; afin de

réduire les risques d'incendie,

n'utilisez qu'un cordon de

communication N0. 26 AWG ou

plus gros.

Regulatory Information

Model No.: PCVA-IMB4A

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference,

and

(2) this device must accept any interference

received, including interference that may cause

undesired operation.

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and

used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to radio

or television reception, which can be determined by

turning the equipment off and on, the user is

encouraged to try to correct the interference by one

or more of the following measures:

❑ Reorient or relocate the receiving antenna.

❑ Increase the separation between the

equipment and the receiver.

❑ Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

❑ Consult the dealer or an experienced radio/

TV technician for help.

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate this

equipment.

Only peripherals (computer input/output devices,

terminals, printers, etc.) that comply with FCC

Class B limits may be attached to this computer

product. Operation with noncompliant peripherals

is likely to result in interference to radio and

television reception.

All cables used to connect peripherals must be

shielded and grounded. Operation with cables,

connected to peripherals, that are not shielded and

grounded, may result in interference to radio and

television reception.

FCC Part 68

This equipment complies with Part 68 of the FCC

rules. The FCC Ringer Equivalence Number (REN)

for this equipment is 0.79B (0.0B for systems with

an installed HomePNA device). If requested, this

information must be provided to the telephone

company.

This modem uses the USOC RJ-11 telephone jack.

The REN is used to determine the quantity of

devices which may be connected to the telephone

line. Excessive RENs on the telephone line may

result in the devices not ringing in response to an

incoming call. In most, but not all areas, the sum of

the RENs should not exceed five (5.0). To be certain

of the number of devices that may be connected to

the line, as determined by the total RENs, contact

the telephone company to determine the maximum

REN for the calling area.

If the terminal equipment causes harm to the

telephone network, the telephone company will

notify you in advance that temporary

discontinuance of service may be required. But if

advance notice is not practical, the telephone

company will notify the customer as soon as

possible. Also, you will be advised of your right to

Declaration of Conformity

Trade Name: SONY

Model No.: PCV-7741

Responsible

Party:

Sony Electronics Inc.

Address: 680 Kinderkamack Rd.

Oradell, NJ 07649

Telephone: 201-930-6972

This phone number is for FCC-related matters

only.

This device complies with Part 15 of the FCC

rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful

interference, and

(2) this device must accept any interference

received, including interference that may cause

undesired operation.

VAIO Digital Studio System Reference Manual

file a complaint with the FCC if you believe it is

necessary.

The telephone company may make changes in its

facilities, equipment, operations or procedures that

could affect the operations of the equipment. If this

happens, the telephone company will provide

advance notice in order for you to make the

necessary modifications in order to maintain

uninterrupted service.

If trouble is experienced with this modem, for

repair or warranty information, please contact 1-

888-4-SONY-PC, or write to the Sony Customer

Information Center, 12451 Gateway Blvd., Fort

Myers, FL 33913. If the trouble is causing harm to

the telephone network, the telephone company may

request that you remove the equipment from the

network until the problem is resolved.

Repair of this equipment should be made only by a

Sony Service Center or Sony authorized agent. For

the Sony Service Center nearest you, call 1-888-4-

SONY-PC (1-888-476-6972).

This equipment cannot be used on public coin

service provided by the telephone company.

Connection to Party Line Service is subject to state

and possible provincial tariffs. (Contact the state or

provincial utility service commission, public

service commission, or corporation commission for

information.)

Telephone Consumer

Protection Act of 1991

(United States)

The Telephone Consumer Protection Act of 1991

makes it unlawful for any person to use a computer

or other electronic device to send any message via a

telephone facsimile machine unless such message

clearly contains, in a margin at the top or bottom of

each transmitted page or on the first page of the

transmission, the date and time it is sent and an

identification of the business, other entity, or

individual sending the message, and the telephone

number of the sending machine or such business,

other entity, or individual.

In order to program this information into your

facsimile machine, see your fax software

documentation.

Telephone Consumer

Guidelines (Canada)

Please refer to your telephone directory under

‘Privacy Issues’ and/or ‘Terms of Service.’ For

more detailed information, please contact:

CRTC

Terrasses de la Chaudiére, Tour centrale

1 promenade du Portage, 5 étage Hull PQ K1A

0N2.

This Class B digital apparatus complies with

Canadian ICES-003.

Cet àppareil numérique de la classe B est conforme

à la norme NMB-003 du Canada.

vii

Disposal of Lithium Battery

You can return your unwanted lithium batteries to

your nearest Sony Service Center or Factory

Service Center.

For the Sony Service Center nearest you, call

1-888-476-6972 in the United States or

1-800-961-7669 in Canada.

✍ In some areas the disposal of lithium

batteries in household or business trash

may be prohibited.

! Do not handle damaged or leaking

lithium batteries.

! Danger of explosion if battery is

incorrectly replaced. Replace only

with the same or equivalent type

recommended by the

manufacturer. Discard used

batteries according to the

manufacturer’s instructions.

! The battery pack used in this

device may present a fire or

chemical burn hazard if

mistreated. Do not disassemble,

heat above 212°F (100°C), or

incinerate. Dispose of used battery

promptly. Keep away from

children.

! Ne pas manipuler les batteries au

lithium qui fuient ou sont

endommagées.

! Une batterie non conforme

présente un danger d'explosion. La

remplacer seulement par une

batterie identique ou de type

équivalent recommandé par le

fabricant. Évacuer les batteries

usées selon les directives du

fabricant.

! La manutention incorrecte du

module de batterie de cet appareil

présente un risque d'incendie ou

de brûlures chimiques. Ne pas

démonter, incinérer ou exposer à

une température de plus de 100°C.

Évacuer promptement la batterie

usée. Garder hors de portée des

enfants.

VAIO Digital Studio System Reference Manual

viii

Industry Canada Notice

NOTICE: The Industry Canada label identifies

certified equipment. This certification means that

the equipment meets certain telecommunications

network protective, operational and safety

requirements as prescribed in the appropriate

Terminal Equipment Technical Requirements

document(s). The Department does not guarantee

the equipment will operate to the users satisfaction.

Before installing this equipment, users should

ensure that it is permissible to be connected to the

facilities of the local telecommunications company.

The equipment must also be installed using an

acceptable method of connection.

The customer should be aware that compliance with

the above conditions may not prevent degradation

of service in some situations.

Repairs to certified equipment should be

coordinated by a representative designated by the

supplier. Equipment malfunctions or any repairs or

alterations made by the user to this equipment may

give the telecommunications company cause to

request that the user disconnect the equipment.

Users should ensure for their own protection that

the electrical ground connections of the power

utility, telephone lines and internal metallic water

pipe system, if present, are connected together. This

precaution may be particularly important in rural

areas.

CAUTION: Users should not attempt to make such

connections themselves, but should contact the

appropriate electrical inspection authority, or

electrician, as appropriate.

NOTICE: The Ringer Equivalence Number (REN)

assigned to each terminal device provides an

indication of the maximum number of terminals

allowed to be connected to a telephone interface.

The termination on an interface may consist of any

combination of devices subject only to the

requirement that the sum of the Ringer Equivalence

Numbers of all the devices does not exceed 5. The

Ringer Equivalence Number for this equipment is

0.79B (0.0B for systems with an installed

HomePNA modem).

Avis de l’Industrie Canada

AVIS : L’étiquette d’Industrie Canada identifie le

matériel homologué.

Cette étiquette certifie que le matériel est conforme

aux normes de protection, d’exploitation et de

sécurité des réseaux de télécommunications,

comme le prescrivent les documents concernant les

exigences techniques relatives au matériel terminal.

Le Ministère n’assure toutefois pas que le matériel

fonctionnera à la satisfaction de l’utilisateur.

Avant d’installer ce matériel, l’utilisateur doit

s’assurer qu’il est permis de le raccorder aux

installations de l’entreprise locale de

télécommunication. Le matériel doit également être

installé en suivant une méthode acceptée de

raccordement. L’abonné ne doit pas oublier qu’il est

possible que la conformité aux conditions énoncées

ci-dessus n’empêche pas la dégradation du service

dans certaines situations.

Les réparations de matériel homologué doivent être

coordonnées par un représentant désigné par le

fournisseur. L’entreprise de télécommunications

peut demander à l’utilisateur de débrancher un

appareil à la suite de réparations ou de

modifications effectuées par l’utilisateur ou à cause

de mauvais fonctionnement.

Pour sa propre protection, l’utilisateur doit s’assurer

que tous les fils de mise à la terre de la source

d’énergie électrique, des lignes téléphoniques et des

canalisations d’eau métalliques, s’il y en a, sont

raccordés ensemble. Cette précaution est

particulièrement importante dans les régions

rurales.

Avertissement : L’utilisateur ne doit pas tenter de

faire ces raccordements lui-même; il doit avoir

recours à un service d’inspection des installations

électriques, ou à un électricien, selon le cas.

AVIS : L’indice d’équivalence de la sonnerie (IES)

assigné à chaque dispositif terminal indique le

nombre maximal de terminaux qui peuvent être

raccordés à une interface.

La terminaison d’une interface téléphonique peut

consister en une combination de quelques

dispositifs, à la seule condition que la somme

d’indices d’équivalence de la sonnerie de tous les

dispositifs n’excède pas 5. L’indice d’équivalence

de la sonnerie de ce matériel est de 0.79B (0.0B

pour les systèmes dotés d’un modem HomePNA).

Contents

NOTICE ....................................................................................................... ii

Owner’s Record................................................................................... ii

Safety Information and Caution ...................................................... iii

Regulatory Information.......................................................................v

FCC Part 68 ...........................................................................................v

Telephone Consumer Protection Act of 1991

(United States) .................................................................................... vi

Telephone Consumer Guidelines (Canada)................................... vi

Disposal of Lithium Battery ............................................................ vii

Industry Canada Notice.................................................................. viii

Avis de l’Industrie Canada.............................................................viii

Chapter 1 — Identifying Components................................1

Front View....................................................................................................2

Drives.....................................................................................................3

Buttons and Switches ..........................................................................4

Indicators......................................................................................................5

Connectors ............................................................................................6

Rear View .....................................................................................................7

Icons .......................................................................................................8

I/O Connectors ..................................................................................10

Expansion Slots ..................................................................................15

Chapter 2 — Configuring Your System ............................17

Accessing the BIOS Setup Utility............................................................18

Changing the Display's Power Management Settings.........................19

VAIO Digital Studio System Reference Manual

Chapter 3 — Removing, Installing, and Replacing

Components....................................................................... 25

Removing the Side Cover .......................................................................26

Replacing the Side Cover ........................................................................27

Removing a PCI Add-in Card ................................................................28

Installing a PCI Add-In Card .................................................................30

Replacing the Lithium Battery ...............................................................32

Removing a Memory Module ................................................................35

Installing System Memory ......................................................................37

Removing a Slot Cover.............................................................................41

Covering an Open I/O Slot ....................................................................42

Installing a 3.5-inch Internal Hard Disk Drive......................................43

To identify additional hard disk space ...........................................47

Removing the Power Supply...................................................................48

Replacing the Power Supply ...................................................................49

Chapter 4 — System Board ............................................... 51

Memory Module (RIMM) Slots...............................................................52

Power Supply and Aux Power Headers ...............................................53

CLR CMOS Jumper...................................................................................55

Chapter 5 — CMOS Setup Options ................................... 57

Main Screen ...............................................................................................59

Advanced Screen ......................................................................................61

Power Screen..............................................................................................63

Boot Screen ................................................................................................64

Exit Screen ..................................................................................................65

Chapter 6 — Miscellaneous Technical Information......... 67

User and Supervisor Passwords ............................................................68

Beep Code Error Messages .....................................................................69

PCI Configuration Status and Error Messages ....................................70

DMA Channel Assignments ...................................................................72

System I/O Address Map........................................................................73

Memory Map ............................................................................................75

IRQ Summary ............................................................................................76

Chapter 7 — Specifications................................................77

Processors ...............................................................................................77

Chipset ......................................................................................................77

AGP Bus .....................................................................................................77

PCI Bus ......................................................................................................78

Memory Modules ....................................................................................78

Memory Configurations .........................................................................78

L2 Cache ....................................................................................................78

Graphics ....................................................................................................78

Audio .........................................................................................................79

Communications .....................................................................................79

Giga Pocket I/O.........................................................................................79

I/O and Expansion Slots .........................................................................80

Floppy Disk Drive and Controller ........................................................80

Hard Drives and Controller ...................................................................80

Optical Drives ............................................................................................80

System BIOS .............................................................................................81

Index ...................................................................................83

VAIO Digital Studio System Reference Manual

xii

Chapter 1

Identifying Components

The following sections identify and describe each component that is

visible from the exterior of the VAIO Digital Studio™ computer. Internal

components are identified in another section of this manual.

VAIO Digital Studio System Reference Manual

Front View

Identifying Components

Drives

Drive Description

Optical disc drive #1 See Specifications sheet for details.

* The Specifications sheet is supplied with your computer's original documentation.

Optical disc drive #2 See Specifications sheet for details.

Floppy disk drive 3.5-inch, 1.44 MB.

Memory Stick® media slot Accommodates Memory Stick media.

Optical disc drive #1

Optical disc drive #2

Floppy disk drive

Memory Stick media slot

VAIO Digital Studio System Reference Manual

Buttons and Switches

Button or switch Description

Optical disc eject button Automatically opens and closes the optical drive

tray.

Floppy disk eject button Ejects a floppy disk.

Power on/off switch Turns system power on, off, or into Stand by

mode.

Optical disc eject

Floppy disk eject

Power on/off

Identifying Components

Indicators

Indicator Description

Floppy disk drive access

indicator

On (green) indicates floppy disk drive

activity.

Hard disk drive access

indicator

On (red) indicates hard disk drive activity.

Optical disc drive access

indicator

On (red) indicates optical drive activity.

Power/Stand by indicator Stand by (amber) indicates the computer

is in Stand by mode.

On (blue) indicates the computer is out of

Stand by mode, ready to use.

Off (no color) indicates the computer is

turned off, or in hibernation mode.

Floppy disk drive access

Hard disk drive access

Optical disc drive access

Power/Stand by

VAIO Digital Studio System Reference Manual

Connectors

Connector Description

Audio L In jack Connects to an audio cable (supplied).

Video In jack Connects to a video cable (supplied).

S-Video In port Connects to an S-video cable (optional).

Audio R In jack Connects to an audio cable (supplied).

i.LINK® port (IEEE

1394)

* To connect to a 6-pin i.LINK device, use the i.LINK port on the back of the system. A 6-pin i.LINK connector

can supply power from the computer to the device if the device also has a 6-pin i.LINK port. A 4-pin i.LINK

connector cannot supply power to the device.

Connects to a digital device that has a 4-pin i.LINK

header.

USB1, USB2 ports Connects to USB devices.

USB1, USB2 ports

i.LINK port

S-Video In port

Video In jack

Audio L In jack

Audio R In jack

Identifying Components

Rear View

Mouse port

Keyboard port

Ethernet port

USB port

Printer/Parallel

S/P DIF

i.LINK port

Serial port

Headphone jack

Line In jack

Microphone jack

VGA Monitor port

AV Out jacks

AV In jacks

Line

AC Input

port

VHF/UHF

port

Out port

LINE

VIDEO

OUTPUT

S VIDEO

VIDEO

AUDIO

VHF

/UHF

VIDEO 1

INPUT

S VIDEO

VIDEO

AUDIO

MONITOR

KEYBOARD

MOUSE

PRINTER

HEADPHONES

MIC

LINE IN

USB NETWORK

ACT

LINK

SERIAL

i.LINK

S400

OPTICAL

OUT

Telephone

port

VAIO Digital Studio System Reference Manual

Icons

Icon Description

Mouse port

Keyboard port

Universal Serial Bus (USB) port

Ethernet port (for LAN connection only)

S/P DIF Optical Out port

LINE

VIDEO

OUTPUT

S VIDEO

VIDEO

AUDIO

VHF

/UHF

VIDEO 1

INPUT

S VIDEO

VIDEO

AUDIO

MONITOR

KEYBOARD

MOUSE

PRINTER

HEADPHONES

MIC

LINE IN

USB NETWORK

ACT

LINK

SERIAL

i.LINK

S400

OPTICAL

OUT

Icon Label Area

La page charge ...

Sony PCV-RX690G Guide de référence

Marque: Sony

Modèle: PCV-RX690G

Catégorie: Équipement musical supplémentaire

Taper: Guide de référence

Télécharger le PDF

rapport

dans d''autres langues

English: Sony PCV-RX690G Reference guide

Sony PCV-RX690G Guide de référence

Sony PCV-RX690G Guide de référence

dans d''autres langues

Documents connexes

Autres documents