Panasonic DMWFL200LGK Le manuel du propriétaire

Operating Instructions

Manuel d’utilisation

使用说明书

Please read these instructions carefully before using

this product, and save this manual for future use.

Il est recommandé de lire attentivement ce manuel

avant d’utiliser l’appareil et de le conserver pour

consultation ultérieure.

请于使用前仔细阅读操作使用说明书，并将说

明书妥善保管，以备将来使用。

≥

DMW-FL200L

FLASH

闪光灯

Model No.

Modèle

型号

SQT1378

F0416CT0

If you have any questions, visit:

USA : http://shop.panasonic.com/support

Canada : www.panasonic.ca/english/support

Pour toute assistance supplémentaire, visiter :

www.panasonic.ca/french/support

SQT1378_cover.fm 1 ページ２０１６年４月１日　金曜日　午後２時１７分

SQT1378

2

Operating Instructions

FLASH

Thank you for purchasing Panasonic product.

Please read these instructions carefully before using this

product, and save this manual for future use.

Contents

Information for Your Safety .......................................... 2

Precautions .................................................................. 5

Supplied Accessories...................................................6

Names of Parts ............................................................ 6

Continuous Firing......................................................... 7

Preparing a Battery (optional)......................................7

Loading Batteries......................................................... 7

Attaching to the Camera .............................................. 7

Turning on the Flash .................................................... 8

Shooting....................................................................... 8

Flash Mode .................................................................. 9

Turning on the LED Light ...........................................10

Wireless Flash Settings .............................................10

Placing Wireless Flash Units .....................................11

Fixing the Irradiation Angle ........................................ 11

Using the Wide Panel ................................................11

Slave Mode ................................................................ 12

Cautions for Use ........................................................12

Specifications............................................................. 13

Limited Warranty (ONLY FOR U.S.A.)....................... 14

Limited Warranty (ONLY FOR CANADA).................. 16

Information for Your Safety

WARNING:

To reduce the risk of fire, electric shock or product

damage,

• Do not expose this unit to rain, moisture, dripping or

splashing.

• Do not place objects filled with liquids, such as vases,

on this unit.

• Use only the recommended accessories.

• Do not remove covers.

• Do not repair this unit by yourself. Refer servicing to

qualified service personnel.

CAUTION!

To reduce the risk of fire, electric shock or product

damage,

• Do not install or place this unit in a bookcase, built-in

cabinet or in another confined space. Ensure this unit

is well ventilated.

SQT1378_ENG.fm 2 ページ２０１６年４月２２日　金曜日　午後６時０分

English

3

SQT1378

IMPORTANT

SAFETY

INSTRUCTIONS

When using your photographic equipment,

basic safety precautions should always be

followed, including the following:

≥ Read and understand all instructions

before using.

≥ Close supervision is necessary when

any appliance is used by or near

children. Do not leave appliance

unattended while in use.

≥

Care must be taken as burns can occur from

touching hot parts.

≥ Do not operate if the appliance has been

dropped or damaged - until it has been

examined by qualified service

personnel.

≥ Let appliance cool completely before

putting away.

≥

To reduce the risk of electric shock, do not

immerse this appliance in water or other

liquids.

≥ To reduce the risk of electric shock, do

not disassemble this appliance, but take

it to qualified service personnel when

service or repair work is required.

Incorrect reassembly can cause electric

shock when the appliance is used

subsequently.

≥ The use of an accessory attachment not

recommended by the manufacturer may

cause a risk of fire, electric shock, or

injury to persons.

SAVE THESE

INSTRUCTIONS

SQT1378_ENG.fm 3 ページ２０１６年４月２２日　金曜日　午後６時０分

SQT1378

4

∫ About the batteries

• Do not heat or expose to flame.

• Do not leave the battery(ies) in a car exposed to direct

sunlight for a long period of time with doors and

windows closed.

• If rechargeable batteries are to be used, then

rechargeable batteries manufactured by Panasonic

are recommended.

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

CAUTION

• Danger of explosion if battery is incorrectly

replaced. Replace only with the type

recommended by the manufacturer.

• When disposing of the batteries, please contact

your local authorities or dealer and ask for the

correct method of disposal.

FCC Note:

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

≥ Reorient or relocate the receiving antenna.

≥ Increase the separation between the equipment and

receiver.

≥ Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

≥ Consult the dealer or an experienced radio/TV technician

for help.

Any unauthorized changes or modifications to this equipment

would void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device

must accept any interference received, including interference

that may cause undesired operation.

Responsible Party:

Panasonic Corporation of North America

Two Riverfront Plaza, Newark, NJ 07102-5490

Support Contact: http://shop.panasonic.com/support

SQT1378_ENG.fm 4 ページ２０１６年４月２２日　金曜日　午後６時０分

English

5

SQT1378

THE FOLLOWING APPLIES ONLY IN CANADA.

-If you see this symbol-

Precautions

≥ This is the external flash for the Panasonic digital

cameras (mentioned as flash in the following). When this

flash is used together with a digital camera that supports

wireless mode, shooting with a wireless flash becomes

possible. Available functions vary depending on the digital

camera used. As for the corresponding digital cameras,

please visit our web site.

http://panasonic.jp/support/global/cs/dsc/ (This Site is

English only.)

∫ Handling the unit

≥ Do not subject the unit to strong vibration or impact.

Doing so may not only cause the unit to malfunction but

also cause the flash head to break.

≥ Sand and dirt may cause the unit to malfunction.

When using the unit in an environment such as a

beach, take steps to protect it from sand and dirt.

≥ This unit is neither dust-proof nor splash-proof. If by

any chance water droplets, etc. are splashed on the

unit, wipe them off with a dry cloth. If the unit fails to

function correctly, consult your dealer or Panasonic.

≥ Be careful not to catch your finger, etc. in

the unit when adjusting the angle of the

flash head.

≥ Read the operating instructions for your

digital camera.

CAN ICES-3(B)/NMB-3(B)

Disposal of Old Equipment

Only for European Union and countries with

recycling systems

This symbol on the products, packaging, and/

or accompanying documents means that used

electrical and electronic products must not be

mixed with general household waste.

For proper treatment, recovery and recycling

of old products, please take them to applicable collection

points in accordance with your national legislation.

By disposing of them correctly, you will help to save

valuable resources and prevent any potential negative

effects on human health and the environment.

For more information about collection and recycling,

please contact your local municipality.

Penalties may be applicable for incorrect disposal of this

waste, in accordance with national legislation.

SQT1378_ENG.fm 5 ページ２０１６年４月２２日　金曜日　午後６時０分

SQT1378

6

Supplied Accessories

[Inspection to be performed when you unpack the unit]

When removing the unit from its packing box, check that the

main unit and the supplied accessories are there and also

check their external appearance and functions to verify that

they have not sustained any damage during distribution and

transportation.

If you discover any trouble, contact your vendor before

using the product.

Product numbers correct as of April 2016. These may be

subject to change.

1 Flash case

2 Flash stand

3 Wide panel

≥ The batteries are optional.

Names of Parts

SFC0373 VFB0243 SFB0010

123

1 Flash head

2 AF assist lamp/LED light

3 Wireless sensor

4 [GR] (Group) switch

5 [CH] (Channel) switch

6 [ON/OFF] button

7 [CHARGE] lamp

8 [AUTO CHECK] lamp

9 Flash exposure

compensation/output

control dial

: LED light output control

dial

; [TEST] button

< Mode lever

= Lock lever



























SQT1378_ENG.fm 6 ページ２０１６年４月２２日　金曜日　午後６時０分

English

7

SQT1378

Continuous Firing

The flash may become hot when fired many times in

succession, resulting in damage or malfunction. The flash

should be fired no more than 10 times in succession at

intervals of 2.5 seconds, after which it should be left unused

for at least 10 minutes.

Preparing a Battery (optional)

Choose from the below batteries:

≥ LR6/AA Alkaline dry batteries (k 2)

≥ HR6/AA Rechargeable nickel metal hydride batteries

(Ni-MH) (k 2)

The use of batteries made by Panasonic is recommended.

Loading Batteries

≥ Use alkaline dry batteries or rechargeable nickel metal

hydride batteries.

1 Rotate the flash head.

2 Slide the lever in the

direction of [2 OPEN] to

open the battery cover.

3 Insert the batteries over

the ribbon (A) with correct

[r]/[s] polarity.

• You can easily take out the

batteries by pulling the ribbon.

4 Close the battery cover

until it clicks into place.

• Close the battery cover so that the ribbon does not stick

out.

Attaching to the Camera

Confirm that both the camera and flash are off. Attaching or

removing the flash while either the flash or the camera is on

may result in malfunction.

1 Slide the lock lever in the direction

opposite to that indicated by the [LOCK 1]

icon (1).

2 Slide the flash into the hot shoe until it

clicks securely into place (2).

3 Slide the lock lever to the [LOCK 1]

position (3).

≥ To remove the flash, slide the lock lever in the direction

opposite to the [LOCK1] arrow and slide it from the shoe.

R6/AA Manganese dry batteries cannot be used.









SQT1378_ENG.fm 7 ページ２０１６年４月２２日　金曜日　午後６時０分

SQT1378

8

Turning on the Flash

Attach a flash to the camera, and then turn the camera on.

Press the [ON/OFF] button.

≥ To turn the flash off, press the [ON/OFF] button again.

≥ Replace the batteries if the [CHARGE] lamp does not light

after:

≥ If the [CHARGE] lamp and [AUTO CHECK] lamp blink

simultaneously, batteries are running low. Replace the

batteries. Using a considerably exhausted battery may

result in malfunction.

≥ The flash will enter sleep mode whenever the camera

enters sleep mode.

≥ If no operations are performed for approximately 20

minutes, the flash will turn off automatically. Press the

[ON/OFF] button to turn it on.

≥ Oscillating sound may be output while charging the flash,

but this is not malfunction.

Shooting

1 Use camera controls to choose the flash

mode.

See the camera operating instructions for details.

2 Choose a flash mode.

“Flash Mode” (P9)

3 Press the shutter button halfway.

4 Press the shutter button the rest of the way

down to take the picture.

The unit emits light in proper exposure if [AUTO CHECK]

lamp flashes for approximately 5 seconds.

≥ When using a flash, flash light may be blocked by the lens

body, lens hood, etc.

≥ Use the wide panel to prevent overexposure at ranges of

less than 1 m (3.3 feet) (P11).

1

[ON/OFF] button

2

[CHARGE] lamp

3

[AUTO CHECK] lamp

30 seconds (Alkaline dry batteries)

10 seconds (Rechargeable nickel metal hydride

batteries)







1

[AUTO CHECK] lamp



SQT1378_ENG.fm 8 ページ２０１６年４月２２日　金曜日　午後６時０分

English

9

SQT1378

∫ Firing a test flash

Press the [TEST] button while the [CHARGE] lamp is lit to

fire a test flash.

Flash Mode

Choose a flash mode according to

your subject and shooting

conditions.

Set the mode lever to the

appropriate position.

1

[CHARGE] lamp

2

[TEST] button

[TTL] (TTL AUTO)

The flash light intensity is controlled automatically

according to the camera’s setup. The flash will be adjusted

based on the brightness taken through the camera’s lens.

Usually use this mode with a camera with communication

capability.

Rotate the flash exposure

compensation/output control dial to

adjust the flash output.

≥ You can make an adjustment by

selecting a value between j3 EV

and i3EV.

≥ Select [0] when not making an adjustment.





[MANUAL]

The flash is fired at the intensity that you set.

Select this mode when using a camera without

communication capability.

Rotate the flash exposure

compensation/output control dial to set

the flash output.

≥ You can set a value between [1/1]

(full flash) and [1/64].

[SLAVE] (SL MANUAL)

The flash can be fired remotely in sync with any flash fired

by other units.

The flash is fired at the intensity that you set.

Rotate the flash exposure

compensation/output control dial to set

the flash output.

≥ You can set a value between [1/1]

(full flash) and [1/64].

[RC]

Wireless control is available with Panasonic digital

cameras that support wireless mode. (P10)

SQT1378_ENG.fm 9 ページ２０１６年４月２２日　金曜日　午後６時０分

SQT1378

10

Turning on the LED Light

Rotate the LED light output

control dial.

Rotating in the direction of 1:

Decreases the amount of light or turns

off the LED light.

≥ When you rotate the dial until it stops, the LED light turns

off.

Rotating in the direction of 2:

Increases the amount of light.

≥ The flash and batteries may become warm if you keep the

LED light on, but this is not a malfunction.

Wireless Flash Settings

Wireless control is available with Panasonic digital cameras

that support wireless mode. See the operating instructions

of the digital camera for operation of the digital camera

during wireless flash shooting.

1 Set the camera to wireless

mode.

2 Set the flash to [RC] mode.

“Flash Mode” (P9)

3 Rotate the flash head.

4 Set the channel with the

[CH] switch.

• Set the camera and flash to the

same channel.

5 Set the group with the [GR]

switch.

• The camera can adjust flash

settings separately for up to 3

groups; choose the group to which

the flash belongs.

≥ If it is difficult to slide the switch, use the tip of a ball point

pen or similar tool to slide it.

≥ After setting the channel and group, return the flash head

to its original angle.

The Firing mode, the flash adjustment, and the manual

flash adjustment can be set for each group by operating the

camera.

≥ The flash will operate as follows when you set the camera

to a setting not supported by the flash:

 

Camera Flash

[Firing Mode]: [AUTO] Does not fire.

[Wireless FP]: [ON] Fires as normal.

SQT1378_ENG.fm 10 ページ２０１６年４月２２日　金曜日　午後６時０分

English

11

SQT1378

Placing Wireless Flash Units

Since the communication is performed with the flash

emission of the camera, the flash positioning range varies

with the camera. Refer to the camera operating instructions

for details about the flash positioning range.

1 Attach the supplied stand.

• Slide the lock lever in the direction

opposite to that indicated by the

[LOCK 1] icon (1) and slide the

flash onto the stand until it clicks

securely into place (2).

• Slide the lock lever to the [LOCK 1] position to latch

the flash in place.

• To remove the flash, slide the latch in the direction

opposite to the [LOCK 1] arrow and slide it from the

stand.

2 Position the flash with the

wireless sensor (A) facing

the camera.

≥ We recommend using a single group

of up to three remote flash units.

≥ Flash may not fire due to the angle

or distance between the camera and

the object.

Fixing the Irradiation Angle

Point the flash head at a wall or ceiling

for bounce flash photography.

Rotate the flash head.

Using the Wide Panel

Use the supplied wide panel for

flash photography when the

focal length of the lens is wider

than 12 mm.

Attach the wide panel to

the flash.

≥ The lighting angle will be the same as the angle of view of

a lens with a focal distance of 7 mm.

Take a test shot after

positioning.







SQT1378_ENG.fm 11 ページ２０１６年４月２２日　金曜日　午後６時０分

SQT1378

12

Slave Mode

The flash can be fired remotely in sync with any flash fired

by other units.

1 Set the flash mode to

[SLAVE].

“Flash Mode” (P9)

2 Position the flash.

Flash positioning method is same

as the wireless mode.

“Placing Wireless Flash Units”

(P11)

Refer to the camera operating

instructions for details about the

flash positioning range.

• Set the flash mode of the camera to the manual which

does not fire the pre-flash. If the camera fires the pre-

flash, the external flash synchronizes with the pre-flash

of the camera, and cannot fire the flash light properly.

• The flash may fire in response to flash units used by

other photographers.

Cautions for Use

∫ About the unit

Do not carry the unit when it is still attached to the

camera body.

We recommend that you place the unit in the flash case

when carrying it.

≥ Place the unit in the flash case with the flash head side

up.

∫ About the batteries

Be sure to remove the batteries when you will not be

using the unit for a long period of time.

SQT1378_ENG.fm 12 ページ２０１６年４月２２日　金曜日　午後６時０分

English

13

SQT1378

Specifications

Specifications are subject to change without notice.

The symbols on this product (including the accessories)

represent the following:

Power requirements:

DC 3.0 V (3.0 V )

Batteries

recommended for

use

LR6/AA

Alkaline dry batteries

k

2/

HR6/AA Rechargeable nickel metal

hydride batteries (Ni-MH)

k 2

Charging time

(from full flash until

the [CHARGE] lamp

lights)

Approx. 5 sec.: LR6/AA Alkaline

dry batteries

Approx. 3 sec.: HR6/AA

Rechargeable nickel metal hydride

batteries

Firing period Approx. 1/10000 sec. to 1/250 sec.

(Varies depending on the flash

intensity)

No. of flashes

(with full flash)

Approx. 120 flashes:

LR6/AA

Alkaline dry batteries

Approx. 200 flashes: HR6/AA

Rechargeable nickel metal hydride

batteries (min. 2400 mAh type)

(Differs depending on the photo

taking conditions.)

AF assist lamp

Effective distance: approximately 1 m

(3.3 feet) to 5 m (16 feet)

(Differs depending on the digital

camera and type of lens used)

Flash modes TTL AUTO/MANUAL/

SL MANUAL/RC

Guide number 20 (ISO100), 14 (ISO100: When

the wide panel is used)

Lighting angle Covers the angle of view of 12 mm

lens (35 mm film camera

equivalent: 24 mm)

(With wide panel: 7 mm lens, 35 mm

film camera equivalent: 14 mm)

Dimensions

Approx. 61.0 mm (W)

k

52.5 mm

(H)

k

82.0 mm (D)

[2.402

q

(W)

k

2.067

q

(H)

k

3.228

q

(D)]

(excluding the projecting parts)

Mass (weight) Approx. 230 g/0.507 lb (including

batteries)

Approx. 180 g/0.397 lb (main unit)

Operating

temperature

0 °C to 40 °C (32 °F to 104 °F)

Operating humidity

10%RH to 80%RH (no condensation)

DC

For the U.S.A.

Panasonic Corporation of North America

Two Riverfront Plaza, Newark, NJ 07102-5490

http://shop.panasonic.com

For CANADA

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3

www.panasonic.com

Printed in China

SQT1378_ENG.fm 13 ページ２０１６年４月２２日　金曜日　午後６時０分

SQT1378

14

Limited Warranty

(ONLY FOR U.S.A.)

Panasonic Products Limited Warranty

Limited Warranty Coverage (For USA Only)

If your product does not work properly because of a defect

in materials or workmanship, Panasonic Corporation of

North America (referred to as “the warrantor”) will, for the

length of the period indicated on the chart below, which

starts with the date of original purchase (“warranty period”),

at its option either (a) repair your product with new or

refurbished parts, (b) replace it with a new or a refurbished

equivalent value product, or (c) refund your purchase price.

The decision to repair, replace or refund will be made by the

warrantor.

During the “Labor” warranty period there will be no charge

for labor. During the “Parts” warranty period, there will be no

charge for parts. This Limited Warranty excludes both parts

and labor for non-rechargeable batteries, antennas, and

cosmetic parts (cabinet). This warranty only applies to

products purchased and serviced in the United States. This

warranty is extended only to the original purchaser of a new

product which was not sold “as is”.

Mail-In Service

--Online Repair Request

Online Repair Request

To submit a new repair request and for quick repair status

visit our Web Site at http://shop.panasonic.com/support

.

When shipping the unit, carefully pack, include all supplied

accessories listed in the Owner’s Manual, and send it

prepaid, adequately insured and packed well in a carton

box. When shipping Lithium Ion batteries please visit our

Web Site at

http://shop.panasonic.com/support

as Panasonic is

committed to providing the most up to date information.

Include a letter detailing the complaint, a return address and

provide a daytime phone number where you can be

reached. A valid registered receipt is required under the

Limited Warranty.

IF REPAIR IS NEEDED DURING THE WARRANTY

PERIOD, THE PURCHASER WILL BE REQUIRED TO

FURNISH A SALES RECEIPT/PROOF OF PURCHASE

INDICATING DATE OF PURCHASE, AMOUNT PAID AND

PLACE OF PURCHASE. CUSTOMER WILL BE

CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED

WITHOUT SUCH PROOF OF PURCHASE.

Limited Warranty Limits and Exclusions

This warranty ONLY COVERS failures due to defects in

materials or workmanship, and DOES NOT COVER normal

wear and tear or cosmetic damage. The warranty ALSO

DOES NOT COVER damages which occurred in shipment,

or failures which are caused by products not supplied by the

warrantor, or failures which result from accidents, misuse,

abuse, neglect, mishandling, misapplication, alteration,

faulty installation, set-up adjustments, misadjustment of

Product or Part Name Parts Labor

Digital Camera Peripherals 1 Year 1 Year

Digital Camera Accessories 90 Days 90 Days

Rechargeable Batteries 1 Year 1 Year

SQT1378_ENG.fm 14 ページ２０１６年４月２２日　金曜日　午後６時０分

English

15

SQT1378

consumer controls, improper maintenance, power line

surge, lightning damage, modification, introduction of sand,

humidity or liquids, commercial use such as hotel, office,

restaurant, or other business or rental use of the product, or

service by anyone other than a Factory Service Center or

other Authorized Servicer, or damage that is attributable to

acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS

LISTED UNDER “LIMITED WARRANTY COVERAGE”.

THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES RESULTING FROM

THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY

BREACH OF THIS WARRANTY.

(As examples, this excludes damages for lost time, travel to

and from the servicer, loss of or damage to media or

images, data or other memory or recorded content. The

items listed are not exclusive, but for illustration only.)

ALL EXPRESS AND IMPLIED WARRANTIES,

INCLUDING THE WARRANTY OF MERCHANTABILITY,

ARE LIMITED TO THE PERIOD OF THE LIMITED

WARRANTY.

Some states do not allow the exclusion or limitation of

incidental or consequential damages, or limitations on how

long an implied warranty lasts, so the exclusions may not

apply to you.

This warranty gives you specific legal rights and you may

also have other rights which vary from state to state. If a

problem with this product develops during or after the

warranty period, you may contact your dealer or Service

Center. If the problem is not handled to your satisfaction,

then write to:

Consumer Affairs Department

Panasonic Corporation of North America

661 Independence Pkwy

Chesapeake, VA 23320

PARTS AND SERVICE, WHICH ARE NOT COVERED BY

THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.

As of March 2016

SQT1378_ENG.fm 15 ページ２０１６年４月２２日　金曜日　午後６時０分

SQT1378

16

Limited Warranty (ONLY FOR CANADA)

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3

PANASONIC PRODUCT – LIMITED WARRANTY

Panasonic Canada Inc. warrants this product to be free

from defects in material and workmanship under normal use

and for a period as stated below from the date of original

purchase agrees to, at its option either (a) repair your

product with new or refurbished parts, (b) replace it with a

new or a refurbished equivalent value product, or (c) refund

your purchase price. The decision to repair, replace or

refund will be made by Panasonic Canada Inc.

This warranty is given only to the original purchaser, or the

person for whom it was purchased as a gift, of a Panasonic

brand product mentioned above sold by an authorized

Panasonic dealer in Canada and purchased and used in

Canada, which product was not sold “as is”, and which

product was delivered to you in new condition in the original

packaging.

IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY

SERVICE HEREUNDER, A PURCHASE RECEIPT OR

OTHER PROOF OF DATE OF ORIGINAL PURCHASE,

SHOWING AMOUNT PAID AND PLACE OF PURCHASE

IS REQUIRED

Digital Camera One (1) year, parts and labour

Digital Camera

Peripherals

One (1) year, parts and labour

Digital Camera

Accessories

Ninety (90) days, parts and

labour

SQT1378_ENG.fm 16 ページ２０１６年４月２２日　金曜日　午後６時０分

English

17

SQT1378

LIMITATIONS AND EXCLUSIONS

This warranty ONLY COVERS failures due to defects in

materials or workmanship, and DOES NOT COVER normal

wear and tear or cosmetic damage. The warranty ALSO

DOES NOT COVER damages which occurred in shipment,

or failures which are caused by products not supplied by

Panasonic Canada Inc., or failures which result from

accidents, misuse, abuse, neglect, mishandling,

misapplication, alteration, faulty installation, set-up

adjustments, misadjustment of consumer controls, improper

maintenance, improper batteries, power line surge, lightning

damage, modification, introduction of sand, humidity or

liquids, commercial use such as hotel, office, restaurant, or

other business or rental use of the product, or service by

anyone other than a Authorized Servicer, or damage that is

attributable to acts of God.

Dry cell batteries, printer ink cartridge and paper are also

excluded from coverage under this warranty.

Rechargeable batteries are warranted for ninety (90) days

from date of original purchase.

THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING ANY IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. IN NO EVENT WILL PANASONIC CANADA

INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR

CONSEQUENTIAL DAMAGES RESULTING FROM THE

USE OF THIS PRODUCT OR ARISING OUT OF ANY

BREACH OF ANY EXPRESS OR IMPLIED WARRANTY.

(As examples, this warranty excludes damages for lost

time, travel to and from the Authorized Servicer, loss of or

damage to media or images, data or other memory or

recorded content. This list of items is not exhaustive, but for

illustration only.)

In certain instances, some jurisdictions do not allow the

exclusion or limitation of incidental or consequential

damages, or the exclusion of implied warranties, so the

above limitations and exclusions may not be applicable.

This warranty gives you specific legal rights and you may

have other rights which vary depending on your province or

territory.

WARRANTY SERVICE

For product operation, repairs and information

assistance, please visit our Support page:

www.panasonic.ca/english/support

SQT1378_ENG.fm 17 ページ２０１６年４月２２日　金曜日　午後６時０分

SQT1378

2

Manuel d’utilisation

FLASH

Merci d’avoir arrêté votre choix sur un produit Panasonic.

Il est recommandé de lire attentivement ce manuel avant

d’utiliser l’appareil et de le conserver pour consultation

ultérieure.

Table des matières

Précautions à prendre..................................................2

Précautions ..................................................................5

Accessoires fournis...................................................... 5

Noms des composants ................................................6

Déclenchement continu ............................................... 6

Choix des piles (vendues séparément)........................6

Mise en place des piles................................................ 7

Mise en place du flash ................................................. 7

Mise en marche du flash.............................................. 8

Prises de vues .............................................................8

Modes du flash ............................................................ 9

Mise en marche de la lampe à DEL...........................10

Paramétrages pour liaison sans fil du flash ...............10

Établissement de flashs avec liaison sans fil.............11

Réglage de l’angle de rayonnement ..........................11

Utilisation du diffuseur à grand-angulaire ..................11

Mode asservi..............................................................12

Précautions d’utilisation .............................................12

Spécifications............................................................. 13

Garantie limitée.......................................................... 14

Précautions à prendre

AVERTISSEMENT :

Pour réduire les risques d’incendie, de choc

électrique ou de dommages à l’appareil :

• N’exposez pas cet appareil à la pluie, à l’humidité, à

l’égouttement ou aux éclaboussements.

• Ne placez sur l’appareil aucun objet rempli de liquide,

tel un vase.

• Utilisez exclusivement les accessoires recommandés.

• Ne retirez pas les couvercles.

• Ne réparez pas l’appareil vous-même. Confiez toute

réparation à un technicien de service qualifié.

ATTENTION!

Afin d’éviter tout risque d’incendie, de choc électrique ou de

dommage à l’appareil :

• N’installez pas ou ne placez pas cet appareil dans une

bibliothèque, une armoire ou tout autre espace confiné.

Assurez-vous que la ventilation de l’appareil est adéquate.

SQT1378_CFR.fm 2 ページ２０１６年４月２５日　月曜日　午前９時４分

FRANÇAIS

3

SQT1378

IMPORTANTES

MESURES DE

SÉCURITÉ

Lors de l’utilisation de votre équipement

photographique, il convient d’observer

certaines précautions de base, notamment :

≥ Lisez attentivement toutes les

instructions.

≥ Ne laissez jamais un enfant utiliser

l’équipement sans surveillance et faites

preuve de la plus grande prudence

lorsque l’équipement est utilisé à

proximité d’enfants. Ne laissez jamais

l’équipement sans surveillance.

≥ Évitez de toucher les parties chaudes de

l’appareil afin de prévenir des brûlures.

≥ N’utilisez pas l’appareil s’il a été

échappé ou subi un choc violent; faites-

le examiner par un technicien qualifié

avant de l’utiliser.

≥ Laissez l’appareil refroidir avant de le

ranger.

≥

Afin de réduire le risque de chocs

électriques, n’immergez pas l’appareil et

ne l’exposez pas à des liquides.

≥ Afin de prévenir les risques de chocs

électriques, ne démontez pas l’appareil.

Confiez toute réparation à un technicien

qualifié. Un remontage impropre peut

entraîner un risque de chocs

électriques.

≥ L’utilisation d’un accessoire autre que

ceux recommandés par le fabricant peut

entraîner des risques d’incendie, de

chocs électriques ou de blessures.

CONSERVEZ CE

MANUEL

SQT1378_CFR.fm 3 ページ２０１６年４月２５日　月曜日　午前９時４分

SQT1378

4

∫ À propos des piles

• N’exposez pas la pile à la chaleur et tenez-la éloignée de toute

flamme.

• Ne laissez pas la ou les piles dans un véhicule exposé au soleil

avec vitres et portes fermées pendant une longue période de

temps.

• Lors de l’utilisation de piles rechargeables, nous

recommandons d’utiliser des piles rechargeables fabriquées

par Panasonic.

CE QUI SUIT NE S’APPLIQUE QU’AU CANADA.

-Si ce symbole apparaît-

ATTENTION

• Danger d’explosion si la pile n’est pas remplacée

correctement. Remplacez-la uniquement par une pile du

type recommandé par le fabricant.

• Suivez les instructions des autorités locales ou celles du

détaillant pour jeter les piles usées.

CAN ICES-3(B)/NMB-3(B)

L’élimination des équipements usagés

Applicable uniquement dans les pays membres de

l’Union européenne et les pays disposant de

systèmes de recyclage.

Apposé sur le produit lui-même, sur son

emballage, ou figurant dans la documentation

qui l’accompagne, ce pictogramme indique

que appareils électriques et électroniques

usagés, doivent être séparées des ordures

ménagères.

Afin de permettre le traitement, la valorisation et le

recyclage adéquats des appareils usagés, veuillez les

porter à l’un des points de collecte prévus, conformément

à la législation nationale en vigueur.

En les éliminant conformément à la réglementation en

vigueur, vous contribuez à éviter le gaspillage de

ressources précieuses ainsi qu’à protéger la santé

humaine et l’environnement.

Pour de plus amples renseignements sur la collecte et le

recyclage, veuillez vous renseigner auprès des

collectivités locales.

Le non-respect de la réglementation relative à

l’élimination des déchets est passible d’une peine

d’amende.

SQT1378_CFR.fm 4 ページ２０１６年４月２５日　月曜日　午前９時４分

La page charge ...

Panasonic DMWFL200LGK Le manuel du propriétaire

Panasonic DMWFL200LGK Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents