ROSIERES RFC3371IN WIFI Manuel utilisateur

Marque: ROSIERES

Modèle: RFC3371IN WIFI

Catégorie: Fours

Taper: Manuel utilisateur

Ce manuel convient également à

RFC33IN WIFI

USER INSTRUCTIONS

OVENS

NOTICE D'EMPLOI ET D'INSTALLATION

DES FOURS ENCASTRABLES

USINES DE ROSIÈRES - 30, rue Y. LACELLE - Rosières - 18400 - Lunery - France

Safety Indications

EN 02

• During cooking, moisture may condense inside the oven cavity or on

the glass of the door. This is a normal condition. To reduce this effect,

wait 10-15 minutes after turning on the power before putting food

inside the oven. ln any case, the condensation disappears when the

oven reaches the cooking temperature.

• Cook the vegetables in a container with a lid instead of an open tray.

• Avoid leaving food inside the oven after cooking for more than 15/20

minutes.

• WARNING: the appliance and accessible parts become hot during use.

Be careful not to touch any hot parts.

• WARNING: the accessible parts can become hot when the grill is in

use. Children should be kept at a safe distance.

• WARNING: ensure that the appliance is switched off before replacing

the bulb, to avoid the possibility of electric shocks.

• WARNING: in order to avoid any danger caused by the accidental

resetting of the thermal interruption device, the appliance should not

be powered by an external switching device, such as a timer, or be

connected to a circuit that is regularly switched on and off.

• Children under 8 should be kept at a safe distance from the appliance

if not continuously supervised.

• Children should not play with the appliance.

• The appliance can be used by those aged 8 or over and by those with

limited physical, sensorial or mental capacities, without experience or

knowledge of the product, only if supervised or provided with

instruction as to the operation of the appliance, in a safe way with

awareness of the possible risks.

• Cleaning and maintenance should not be carried out by unsupervised

children.

• Do not use rough or abrasive materials or sharp metal scrapers to

clean the oven door glasses, as they can scratch the surface and cause

the glass to shatter.

• The oven must be switched off before removing the removable parts.

EN 03

After cleaning, reassemble them according the instructions.

• Only use the meat probe recommended for this oven.

• Do not use a steam cleaner for cleaning operations.

• Connect a plug to the supply cable that is able to bear the voltage,

current and load indicated on the tag and having the earth contact. The

socket must be suitable for the load indicated on the tag and must have

ground contact connected and in operation. The earth conductor is

yellow-green in colour. This operation should be carried out by a

suitably qualified professional. ln case of incompatibility between the

socket and the appliance plug, ask a qualified electrician to substitute

the socket with another suitable type. The plug and the socket must be

conformed to the current norms of the installation country. Connection

to the power source can also be made by placing an omnipolar breaker

between the appliance and the power source that can bear the

maximum connected load and that is in line with current legislation.

The yellow-green earth cable should not be interrupted by the breaker.

The socket or omnipolar breaker used for the connection should be

easily accessible when the appliance is installed.

• The disconnection may be achieved by having the plug accessible or

by incorporating a switch in the fixed wiring in accordance with the

wiring rules.

• lf the power cable is damaged, it should be substituted with a cable or

special bundle available from the manufacturer or by contacting the

customer service department. The type of power cable must be

H05V2V2-F. This operation should be carried out by a suitably qualified

professional. The earth conductor (yellow-green) must be

approximately 10 mm longer than the other conductors. For any

repairs, refer only to the Customer Care Department and request the

use of original spare parts.

• Failure to comply with the above can compromise the safety of the

appliance and invalidate the guarantee.

• Any excess of spilled material should be removed before cleaning.

• A long power supply failure during an occurring cooking phase may

cause a malfunction of the monitor. ln this case contact customer

service.

• The appliance must not be installed behind a decorative door in order

to avoid overheating.

• When you place the shelf inside, make sure that the stop is directed

upwards and in the back of the cavity. The shelf must be inserted

completely into the cavity.

• WARNING: Do not line the oven walls with aluminium foil or single-use

protection available from stores. Aluminium foil or any other

protection, in direct contact with the hot enamel, risk melting and

deteriorating the enamel of the insides.

• WARNING: Never remove the oven door seal.

• CAUTION: Do not refill the cavity bottom with water during cooking or

when the oven is hot.

• No additional operation/setting is required in order to operate the

appliance at the rated frequencies.

EN 04

Summary

EN 05

General Instructions

1.1 Safety indications

1.2 Electrical safety

1.3 Recommendations

1.4 Installation

1.5 Waste management

1.6 Declaration of compliance

2.1 Overview

2.2 Accessories

2.3 First use

Product Description

3.1 Display description

3.2 Cooking modes

Use of the Oven

4.1 General notes on cleaning

4.2 Maintenance

• Instruction for removal and cleaning

of the side racks

• Removal of the oven window

• Removal and cleaning of the glass

door

• Changing the bulb

Oven Cleaning and Maintenance

5.1 F.A.Q.

Troubleshooting

1. General Instructions

We thank you for choosing one of our products. For the

best results with your oven, you should read this

manual carefully and retain it for future reference.

Before installing the oven, take note of the serial

number so that you can give it to customer service staff

if any repairs are required. Having removed the oven

from its packaging, check that it has not been damaged

during transportation. If you have doubts, do not use

the oven and refer to a qualified technician for advice.

Keep all of the packaging material (plastic bags,

polystyrene, nails) out of the reach of children. When

the oven is switched on for the first time, strong

smelling smoke can develop, which is caused by the glue on the insulation panels surrounding the oven

heating for the first time. This is absolutely normal and, if it occurs, you should wait for the smoke to

dissipate before putting food in the oven. The manufacturer accepts no responsibility in cases where

the instructions contained in this document are not observed.

NOTE: the oven functions, properties and accessories cited in this manual will vary, depending on the

model you have purchased.

1.1 Safety Indications

Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for

example as a heat source, is considered improper and therefore dangerous. The manufacturer cannot

be held responsible for any damage resulting from improper, incorrect or unreasonable usage.

The use of any electrical appliance implies the observance of some fundamental rules:

- do not pull on the power cable to disconnect the plug from the socket;

- do not touch the appliance with wet or damp hands or feet;

- in general the use of adaptors, multiple sockets and extension cables is not recommended;

- in case of malfunction and/or poor operation, switch off the appliance and do not tamper with it.

1.2 Electrical Safety

ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS.

The power supply to which the oven is connected must conform with the laws in force in the country of

installation. The manufacturer accepts no responsibility for any damage caused by the failure to observe

these instructions. The oven must be connected to an electrical supply with an earthed wall outlet or a

disconnector with multiple poles, depending on the laws in force in the country of installation. The

electrical supply should be protected with suitable fuses and the cables used must have a transverse

section that can ensure correct supply to the oven.

CONNECTION

The oven is supplied with a power cable that should only be connected to an electrical supply with 220-

240 Vac 50 Hz power between the phases or between the phase and neutral. Before the oven is

connected to the electrical supply, it is important to check:

- power voltage indicated on the gauge;

- the setting of the disconnector.

The grounding wire connected to the oven's earth terminal must be connected to the earth terminal of

the power supply.

WARNING

Before connecting the oven to the power supply, ask a qualified electrician to check the continuity of the

power supply's earth terminal. The manufacturer accepts no responsibility for any accidents or other

problems caused by failure to connect the oven to the earth terminal or by an earth connection that has

defective continuity.

EN 06

1.3 Recommendations

After each use of the oven, a minimum of cleaning will help keep the oven perfectly clean.

Do not line the oven walls with aluminium foil or single-use protection available from stores. Aluminium

foil or any other protection, in direct contact with the hot enamel, risks melting and deteriorating the

enamel of the insides. In order to prevent excessive dirtying of your oven and the resulting strong

smokey smells, we recommend not using the oven at very high temperature. It is better to extend the

cooking time and lower the temperature a little. In addition to the accessories supplied with the oven,

we advise you only use dishes and baking moulds resistant to very high temperatures.

1.4 Installation

The manufacturers have no obligation to carry this out. If the assistance of the manufacturer is required

to rectify faults arising from incorrect installation, this assistance is not covered by the guarantee. The

installation instructions for professionally qualified personnel must be followed. Incorrect installation

may cause harm or injury to people, animals or belongings. The manufacturer cannot be held

responsible for such harm or injury.

The oven can be located high in a column or under a worktop. Before fixing, you must ensure good

ventilation in the oven space to allow proper circulation of the fresh air required for cooling and

protecting the internal parts. Make the openings specified on last page according to the type of fitting.

NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available

so that the oven can be connected to this if it is removed from the space in which it is installed. The

power cable must only be substituted by technical service staff or by technicians with equivalent

qualifications.

1.5 Waste management and environmental protection

This appliance is labelled in accordance with European Directive 2012/19/EU regarding electric

and electronic appliances (WEEE). The WEEE contain both polluting substances (that can have

a negative effect on the environment) and base elements (that can be reused). It is important

that the WEEE undergo specific treatments to correctly remove and dispose of the pollutants

and recover all the materials. Individuals can play an important role in ensuring that the WEEE

do not become an environmental problem; it is essential to follow a few basic rules:

- the WEEE should not be treated as domestic waste;

- the WEEE should be taken to dedicated collection areas managed by the town council or a registered

company.

In many countries, domestic collections may be available for large WEEEs. When you buy a new appliance,

the old one can be returned to the vendor who must accept it free of charge as a one-off, as long as the

appliance is of an equivalent type and has the same functions as the purchased appliance.

SAVING AND RESPECTING THE ENVIRONMENT

Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently as

possible, because heat from the cavity disperses every time it is opened. For a significant energy saving,

switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and use the

residual heat that the oven continues to generate. Keep the seals clean and in order, to avoid any heat

dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed cooking"

programme makes energy saving more simple, moving the cooking process to start at the reduced tariff

time slot.

1.6 Declaration of compliance

By placing the mark on the appliance, we are confirming compliance to all relevant European

safety, health and environmental requirements which are applicable in legislation for this product.

Hereby, Candy Hoover Group Srl declares that the radio equipment is in compliance with Directive

2014/53/EU. The full text of the EU declaration of conformity is available at the following internet

address: www.candy-group.com.

EN 07

2. Product Description

2.1 Overview

1. Control panel

2. Shelf positions

(lateral wire grid if included)

3. Metal grill

4. Drip pan

5. Fan (behind the steel plate)

6. Oven door

2.2 Accessories

Metal grill

Drip pan

Holds baking trays and plates.

Collects the residues that drip during the cooking

of foods on the grills.

EN 08

Lateral wire grids

It located at both sides of the oven cavity. It holds

metal grills and drip pans.

2.3 First Use

PRELIMINARY CLEANING

Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash

all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the

empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering

smells of newness.

EN 09

3. Use of the Oven

3.1 Display description

WARNING : the first operation to carry out after the oven

has been installed or following the interruption of power

supply (this is recognizable the display pulsating and

showing ) is setting the correct time. 12:00 The bottom

right LED flashes at the same time ( ). This is achieved

as follows.

•Set time with buttons."-" "+"

•Push the Menu button or wait 5 seconds than the clock is

setted.

ATTENTION: The oven will only operate setting the clock

1. Thermostat selector knob

2. Thermostat signal lamp

3. End of cooking

4. Cooking time

5. Temperature or clock display

6. LCD display adjustment controls

7. Minute minder

8. Clock setting

9. Wifi signal lamp

10. Function selector knob

EN 10

FUNCTION HOW TO DEACTIVATE WHAT IT DOES WHY IT IS NEEDED HOW TO USE

KEY LOCK

MINUTE

MINDER

COOKING

TIME

END OF

COOKING

•Child Lock function is

activated by touching Set

(+) for a minimum of 5

seco n d s . Fr om t h i s

moment on all other

function are locked and

the display will flash

STOP and preset time

intermittently.

•Child Lock function is

deactivated by touching

touchpad Set (+) again

for a minimum of 5

seco n d s . Fr om t h i s

moment on all functions

are selectable again.

•Push the central button

1 times

•Press the buttons "-"

"+"

to set the required time

•Release all the buttons

•When the set time as

elapsed an audible alarm

is activated (this alarm

will stop on its own,

ho wever it can be

stopped immediately by

pressing the button)

SELECT.

•Sounds an alarm at the

end of the set time.

•During the process, the

display shows the

remaining time.

•Allows to use the oven as

al arm c l oc k ( co uld b e

a c t i v a t e d ei t h er wit h

operating the oven or with

out operating the oven)

• Push the central button

2 times

• Press the buttons "-" or

"+"to set the lenght of

cooking required

• Release all buttons

• S e t t h e c o o k i n g

function with the oven

function selector

• It allows to preset the

cooking time required for

the recipe chosen.

• To check how long is left

to run press the SELECT

button 2 Times.

• To alter/change the

preset time press SELECT

and "-" "+" buttons.

•Push any button to

stop the signal. Push the

central button to return

t o t h e c l o c k

function.

•When the time is elapsed

the oven will switch off

automatically.

Should you wish to stop

cooking earlier either turn

the function selector to 0, or

s e t t i m e t o 0 : 0 0

(SELECT and "-" "+" buttons)

•At the time set, the

oven will switch off. To

switch off manually,

turn the oven function

selector to position O.

•Enables you to set the

end of cooking time

•To check the preset

time push the central

button 3 times

•To modify the preset

tim e pre s s b u tto n s

SELECT + "-" "+"

•Push the central button

3 t i m e s •P r e s s t h e

buttons "-" "+" to set the

time at which you wish

the oven to switch off

•Release the buttons

• S e t t h e c o o k i n g

function with the oven

function selector.

•This function is typically

used with “cooking time”

function.

For example if the dish has

to be cooked for 45 minutes

and needs to be ready by

12:30, simply select the

required function, set the

cooking time to 45 minutes

and the end of cooking time

to 12:30.

•At the end of the cooking

set time, the oven will

switch off automatically and

an audible alarm will ring.

• C o o k i n g w i l l s t a r t

auto m a t i cally at 11:45

(12:30 minus 45 mins) and

will continue until the pre-

set end-of-cooking-time,

when the oven will switch

itself off automatically.

WARNING.

If the END of cooking is

selected without setting the

length of cooking time, the

oven will start cooking

immediately and it will stop

at the END of cooking time

set.

ELETTRONICA ZERO WIFI FUNCTION

For all the details related to the link between app and product, refer to the

Quick Guide.

Wi Fi has two different positions on the cooking selector:

• Wi Fi on: Wi Fi is switched on only if the oven is already enrolled to your

device. In this position the oven will be only controlled by remote.

• Wi Fi reset: After leaving the selector on Wi Fi reset for 30”, Bluetooth will

switch on and you will be able to enroll the oven to your device within 5’.

If the enrollment is successful, the oven will be controlled by remote and

the Wi Fi icon will switch on. If the enrollment is unsuccessful, Wi Fi will

switch off and the oven will be reset.

To proceed with a new enrollment the cooking program selector has to be

turned out from Wi Fi reset position and moved again on it.

Note: Install the App on your device before starting enrolling

Note: The device where the App is installed must have Bluetooth activated

Note: For both Wi Fi positions, the touch buttons do not work.

Note: It is important to establish a good Wi-Fi signal strength between the

home router and the appliance. When the oven is trying to connect to

router the icon will blink 3” on and 1” off, when it is already connected the

icon will switch on.

1. Program selection / 2. Program duration / 3. Cooking start setting / 4- Dedicated recipes selection

/ 5. Offline and vocal assistant / 6. Tips, suggestions and online user manual

1 2

3 4

ROSIERES E-PICURIEN:

For detailed information on HOW TO CONNECT your E-picurien appliance

and HOW TO USE IT effectively, go to www.rosieresepicurien.com.

EN 11

WIRELESS PARAMETERS

Bluetooth v4.2

2,412 GHz. – 2,484 GHz

Basic data rate:

RF Transmit Power (Typ):

+4 dBm

Enhanced data rate:

RF Transmit Power (Typ):

+2 dBm

BLE:

RF Transmit Power (Typ):

+7.5 dBm

802.11 b/g/n

2,412 GHz. – 2,484 GHz

802.11b. DSSS 1 Mbps=

+19.5 dBm

802.11b. CCK 11 Mbps=

+18.5 dBm

802.11g. OFDM 54 Mbps=

+18.5 dBm

802.11n. MCS7=

+14 dBm

802.11b =1024 bytes,

-80 dBm

802.11g =1024 bytes,

-70 dBm

802.11n =1024 bytes,

-65 dBm

802.11n HT40 =1024 bytes,

-65 dBm

Wireless

Standart

Frequency

Range

Max.

Transmit

Power

Minimum

Receiving

Sensivity

Parameter

Specifications

(Wi-Fi)

Specifications

(Bluetooth)

Basic data rate:

Sensivity@ 0.1% BER:

-98 dBm

Enhanced data rate:

Sensivity@ 001% BER:

-98 dBm

BLE:

Sensivity@ 0.1% BER:

-98 dBm

Product information for networked equipment

power consumption of

the product in networked

st a n d by i f a l l w i re d

n e t w o r k p o r t s a r e

c o n n e c t e d a n d a l l

wireless network ports

are activated:

2,0 W

How to activate wireless

network port:

Starting from an oven that

is not enrolled, putting the

right knob on the Reset

position. Wifi module is

switched on after 30".

If oven is enrolled with WiFi

off, putting the right knob

on WiFi position the WiFi

module is switched on.

H o w t o d e a c t i v a t e

wireless network port:

If oven is enrolled, putting

the right knob on Reset

position the WiFi module

is switched off.

Quick Guide Rosières E-Picurien OVEN -

Enrollment on App

Procedure for devices with Bluetooth 4.0 (or

higher)

IMPORTANT

This quick guide illustrates the steps to follow to

enroll your appliance on the App Rosières E-

Picurien, using a device with Bluetooth 4.0 (or

higher) technology. In this case, the procedure is

simplified and faster (Easy Enrollment).

If you are using a device without Bluetooth

technology (or less than 4.0), please follow the

instructions described on the other side of this

guide.

STEP 1

• Mark down the appliance Serial Number.

• Mark down the Wi-Fi Name and Password

(WPA/ WEP Key) which are normally placed on the

back of your Wi-Fi router.

NOTES

• The frequency of the home Wi-Fi network has to

be set on the 2.4 GHz band. You cannot configure

the appliance if your home network is set to the 5

GHz band.

• If you are having trouble locating the WPA/WEP

Password, please contact your Internet Provider.

Please make sure your smartphone is connected

to the same Wi-Fi network and has the Bluetooth

enabled within the “Settings”. Refer to the manual

for more details.

STEP 2

• Download the Rosières E-Picurien App from the

Store.

• Open the Rosières E-Picurien App and create

your user profile by taping on “Register”. Accept

the privacy policy and fill in the required fields.

NOTES

• The App is available for Android (version 4.4 or

higher) and iOS (version 8.0 or higher) devices.

• If you already have a Rosières E-Picurien user

profile, you can login using your credentials.

STEP 3

• In the homepage, tap on the icon with the three

bars on the top left to enter your profile, then tap

on “REGISTER NEW APPLIANCE” and select the

name of the product that you want to enroll.

STEP 4

• Insert the purchase date of your appliance

(DD/MM/YYYY), then tap on “Proceed”.

STEP 5

• Insert the 16 digits of the serial number or scan

the QR code on the appliance. Tap on “Next”.

Check data correctness of the data and tap on

“Confirm”. Once the system has recognized the

product, tap on “Next”.

STEP 6

On the appliance:

1) Turn the knob to the WI-FI RESET program and

wait 30 seconds.

2) When the Wi-Fi indicator starts blinking quickly,

Bluetooth will come on for 5' and you can proceed

with enrollment within 5 minutes.

In App:

• Tap on “Confirm”. Wait for APP to connect to the

appliance.

NOTES

• In case of any issue, tap “Retry”, making sure you

have enabled Bluetooth on your device

(smartphone / tablet). If the process has not been

completed correctly yet, tap on “Proceed with

Standard Enrollment”.

• To ensure correct data transfer, we recommend

you to stay with the device close to the appliance.

STEP 7

• Insert the password of your home Wi-Fi

network.

• Select the type of password (WEP or WPA), then

tap on “Confirm”.

• The enrollment process is now finished.

NOTES

• If this is not automatically synchronised by the

App, please insert the name of your home Wi-Fi

network in the first box; pay attention to the

difference between lowercase and uppercase.

IF THE SET UP IS NOT SUCCESSFUL

It's important to establish a good Wi-Fi signal

strength between the home router and the

appliance: low Wi-Fi signal strength would cause

the failure of the final stage of the set up. To assess

if this is the case, start the connection process

again from Step 1; when you get to Step 6, when

you get to Step 6, place your device (smartphone

or tablet) next to the router and search for

“WIFIOVEN-xyzk” net generated by the appliance.

If this does not come up as an option, it means

EN 12

that the router cannot see the appliance. In this

case, we highly recommend you to bring the

router near the appliance (if possible) or contact

your internet provider to purchase a compatible

“Wi-Fi Range Extender” to increase the signal

strenght.

Remote control mode

• Turn the program selection knob to the WI-FI

position: the wifi light will turn on and you can

now control the oven remotely.

NOTES

• Warning, if the enrolled oven is left on the WI-FI

RESET position for more than 5 minutes, the oven

will be reset and you will have to proceed with a

new enrollment.

Quick Guide Rosières E-Picurien OVEN -

Enrollment on App

Procedure for devices without Bluetooth 4.0 (or

less than 4.0)

IMPORTANT

This quick guide outlines the steps you should

follow to enroll your appliance using the App

Rosières E-Picurien, utilizing a device without

Bluetooth technology. We recommend you to

proceed with a smartphone/tablet equipped with

this technology to make the procedure simpler.

If you are using a device with Bluetooth

technology (or higher than 4.0), please follow the

instructions described on the other side of this

guide.

STEP 1

• Make a note of the appliance Serial Number and

Wi-Fi Name and Password (WPA/WEP Key), which

are normally found on the back of your Wi-Fi

router.

• Please make sure that your smartphone/ tablet

is connected to the same Wi-Fi network.

NOTES

• The frequency of the home Wi-Fi network has to

be set on the 2.4 GHz band. You can not configure

the appliance if your home network is set to the 5

GHz band.

• If you are having trouble locating the WPA/WEP

Password, please contact your Internet Provider.

STEP 2

• Download the Rosières E-Picurien App from the

Store.

• Open the Rosières E-Picurien App and create

your user profile by taping on “Register”. Accept

the privacy policy and fill in the required fields.

NOTES

• The App is available for Android (version 4.4 or

higher) and iOS (version 8.0 or higher) devices.

• If you already have a Rosières E-Picurien user

profile, you can login using your credentials.

STEP 3

• In the homepage, tap on the icon with the three

bars on the top left to enter your profile, then tap

on “REGISTER NEW APPLIANCE” and select the

name of the product that you want to enroll.

STEP 4

• Insert the purchase date of your appliance

(DD/MM/YYYY), then tap on “Proceed”.

STEP 5

• Insert the 16 digits of the serial number or scan

the QR code on the appliance. Tap on “Next”.

Check data correctness and tap on “Confirm”.

Once the system has recognized the product, tap

on “Next”.

STEP 6

• On the appliance - Turn the knob to the WI-FI

RESET program and wait 5 minutes. The

countdown will appear on the App, after which

you can complete enrollment.

• In App- Tap on “Confirm”.

NOTES

• To ensure correct data transfer, we recommend

that you stay with the device close to the

appliance.

STEP 7

• Exit the Rosières E-Picurien App.

• Go to your device Wi-Fi settings.

STEP 8

• In the list of available Wi-Fi networks, select

“WIFIOVEN-xyzk”.

NOTES

• If you do not find it, wait few more seconds or

proceed with a new scan.

STEP 9

• Exit from the settings of your device.

• Return to the Rosières E-Picurien App and wait

for the App to detect the appliance.

• Once the “Wi-Fi Network is active” screen

appears, tap on “Next”.

EN 13

STEP 10

• Insert the password of your home Wi-Fi

network.

• Select the type of password (WEP or WPA), then

tap on “Confirm”.

NOTES

• If this is not automatically synchronised by the

App, please insert the name of your home Wi-Fi

network in the first box; pay attention to the

difference between lowercase and uppercase.

STEP 11

• Wait until the end of the data transfer process

between the App and the product, then tap on

“Confirm”. “CONNECTED” appears on the

appliance display and then “REMOTE CONTROL

ON”.

• The enrollment process is now finished.

IF THE SET UP IS NOT SUCCESSFUL

It's important to establish a good Wi-Fi signal

strength between the home router and the

appliance: low Wi-Fi signal strength would cause

the failure of the final stage of the set up. To assess

if this is the case, start the connection process

again from Step 1; when you get to Step 6, place

your device (smartphone or tablet) next to the

router and search for “WIFIOVEN-xyzk” net

generated by the appliance. If this does not come

up as an option, it means that the router cannot

see the appliance. In this case, we highly

recommend you to bring the router near the

appliance (if possible) or contact your internet

provider to purchase a compatible “Wi-Fi Range

Extender” to increase the signal strenght.

Remote control mode

• Turn the program selection knob to the WI-FI

position: the wifi light will turn on and you can

now control the oven remotely.

NOTES

• Warning, if the enrolled oven is left on the WI-FI

RESET position for more than 5 minutes, the oven

will be reset and you will have to proceed with a

new enrollment.

EN 14

3.2 Cooking Modes

EN 15

T °C

Suggested

180

Function

Dial

Function (Depends on the oven model)

LAMP: Turns on the oven light.

190

*Tested in accordance with the EN 60350-1 for the purpose of energy consumption declaration and energy class

210

230

220

MULTI-LEVEL: We recommend you use this method for poultry, pastries, fish and

vegetables. Heat penetrates into the food better and both the cooking and

preheating times are reduced. You can cook different foods at the same time with

or without the same preparation in one or more positions. This cooking method

gives even heat distribution and the smells are not mixed.

Allow about ten minutes extra when cooking foods at the same time.

DEFROST: When the dial is set to this position. The fan circulates air at room

temperature around the frozen food so that it defrosts in a few minutes without the

protein content of the food being changed or altered.

MASTER BAKE : This function allows to cook in a healthier way, by reducing the

amount of fat or oil required. The combination of heating elements with a

pulsating cycle of air ensures a perfect baking result.

GRILL: use the grill with the door closed.

The top heating element is used alone and you can adjust the temperature. Five

minutes preheating is required to get the elements red-hot. Success is guaranteed

for grills, kebabs and gratin dishes. White meats should be put at a distance from

the grill; the cooking time is longer, but the meat will be tastier. You can put red

meats and fish fillets on the shelf with the drip tray underneath. The oven has two

grill positions: Grill: 2140 W Barbecue: 3340 W

BOTTOM HEATING + FAN: The bottom heating element is used with the fan

circulating the air inside the oven. This method is ideal for juicy fruit flans, tarts,

quiches and pâté.

It prevents food from drying and encourages rising in cakes, bread dough and other

bottom-cooked food. Place the shelf in the bottom position.

CONVENTIONAL: Both top and bottom heating elements are used. Preheat the

oven for about ten minutes. This method is ideal for all traditional roasting and

baking. For seizing red meats, roast beef, leg of lamb, game, bread, foil wrapped

food (papillotes), flaky pastry. Place the food and its dish on a shelf in mid position.

PIZZA: With this function hot air circulated in the oven to ensure perfect result for

dishes such as pizza or cake.

WIFI ON: Oven allows wifi connection.

WIFI RESET: It allows wifi connection to be restarted.

50 ÷ MAX

T °C

Range

50 ÷ MAX

EN 16

4. Oven cleaning and maintenance

4.1 General notes on cleaning

The lifecycle of the appliance can be extended through regular cleaning. Wait for the oven to cool before

carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for

cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based

detergents (ammonia).

GLASS PARTS

It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven. To

remove more obstinate stains, you can use a detergent-soaked sponge, well wrung out, and then rinse

with water.

OVEN WINDOW SEAL

If dirty, the seal can be cleaned with a slightly damp sponge.

ACCESSORIES

Clean accessories with a wet, soapy sponge before rinsing and drying them: avoid using abrasive

detergents.

DRIP PAN

After using the grill, remove the pan from the oven. Pour the hot fat into a container and wash the pan in

hot water, using a sponge and washing-up liquid.

If greasy residues remain, immerse the pan in water and detergent. Alternatively, you can wash the pan

in the dishwasher or use a commercial oven detergent. Never put a dirty pan back into the oven.

4.2 Maintenance

Instruction for removal and cleaning of the side racks

1. Remove the wire racks by pulling them in the direction of the arrows (see below)

2. To clean the wire racks either put them in the dishwasher or use a wet sponge, ensuring that they are

dried afterwards.

3. After the cleaning process install the wire racks in reverse order.

REMOVAL OF THE OVEN WINDOW

1. Open the front window.

2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them

downwards.

3. Replace the window by carrying out the procedure in reverse.

LOW-E

REMOVAL AND CLEANING OF THE GLASS DOOR

1. Open the oven door.

2.3.4. Lock the hinges, remove the screws and remove the upper metal cover by pulling it upwards.

5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove

the second and third glass (if present)).

7. At the end of cleaning or substitution, reassemble the parts in reverse order.

On all glass, the indication "Pyro" must be legible and positioned on the left side of the door, close to the

left-hand lateral hinge. In this way, the printed label of the first glass will be inside the door.

EN 17

CHANGING THE BULB

1. Disconnect the oven from the mains supply.

2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type.

3. Once the defective bulb is replaced, replace the glass cover.

5. Troubleshooting

5.1 FAQ

PROBLEM POSSIBLE CAUSE SOLUTION

The oven does not heat up

The clock is not set Set the clock

A cooking function and

temperature has not been set

Ensure that the necessary

settings are correct

The oven does not heat up

EN 18

Steam and condensation on

the user interface panel

Clean with a microfiber

cloth the user interface

panel to remove the

condensation layer

No reaction of the touch

user interface

FR 19

Conseils De Securite

• Pendant la cuisson, de l’humidité peut se condenser à l’intérieur de la

cavité ou sur la vitre de la porte. Il s’agit d’un phénomène normal. Pour

réduire cet effet, attendez 10-15 minutes après avoir allumé l’appareil

avant de mettre les aliments au four. La condensation disparaîtra de

toutes façons dès que le four aura atteint la température de cuisson.

• Cuisez les légumes dans un récipient avec couvercle plutôt que dans

un ustensile ouvert.

• Évitez de laisser des aliments à l’intérieur du four plus de 15-20

minutes après cuisson.

• AVERTISSEMENT : L’appareil et ses parties accessibles chauffent

pendant l’utilisation.

Faites attention à ne pas toucher les parties chaudes.

• AVERTISSEMENT : Les parties accessibles peuvent devenir très

chaudes quand le grill est en marche. Les enfants doivent être tenus à

une distance de sécurité.

• AVERTISSEMENT : Vérifiez que l’appareil est éteint avant de remplacer

l’ampoule, pour éviter le risque de chocs électriques.

• AVERTISSEMENT : Afin d’éviter tout risque lié à la réinitialisation

accidentelle de l’interrupteur thermique, l’appareil ne doit pas être

alimenté par un dispositif de commutation externe, tel qu’une

minuterie, ou relié à un circuit régulièrement allumé et éteint.

• Les enfants de moins de 8 ans doivent rester à une distance de

sécurité de l’appareil s’ils ne sont pas surveillés en permanence.

• Les enfants ne doivent pas jouer avec l’appareil.

L’appareil peut être utilisé par des enfants de plus de 8 ans et par des

personnes dont les capacités physiques, sensorielles ou mentales sont

limitées, sans expérience ni connaissance du produit, uniquement s’ils

sont surveillés ou s’ils ont été informés de la manière d’utiliser

l’appareil, en toute sécurité et qu’ils comprennent les risques possibles.

• Le nettoyage et l’entretien ne doivent pas être effectués par des

enfants sans surveillance.

• N’utilisez pas de matériaux rugueux ou abrasifs ou de racloirs

FR 20

métalliques acérés pour nettoyer les vitres des portes des fours, car cela

pourrait rayer la surface et provoquer la rupture de la vitre.

• Coupez le four avant de retirer les pièces amovibles.

• Après le nettoyage, remontez-les selon les instructions.

• Utilisez uniquement la sonde à viande recommandée pour ce four.

• N’utilisez pas un nettoyeur à vapeur pour le nettoyage.

• Branchez le câble d’alimentation sur une prise de courant qui

supporte le voltage (le courant et la charge sont indiqués sur l’étiquette)

et vérifiez la présence d’une mise à la terre. La prise d’alimentation doit

supporter la charge indiquée sur l’étiquette et être dotée d’une mise à

la terre en état de fonctionnement. Le conducteur de mise à la terre est

jaune et vert. Cette opération doit être exécutée par le personnel

qualifié. En cas d’incompatibilité entre la prise d’alimentation et la fiche

du câble de l’appareil, demandez à un électricien professionnel de

remplacer la prise d’alimentation par un dispositif compatible.

La fiche du câble d’alimentation et la prise d’alimentation doivent être

conformes aux normes en vigueur dans le pays d’installation.

Il est possible de brancher l’appareil à la prise d’alimentation en

installant entre l’appareil et la prise d’alimentation un disjoncteur

multipolaire qui supporte la charge électrique maximale,

conformément aux lois en vigueur.

Le conducteur jaune et vert de mise à la terre ne doit pas être bloqué

par le disjoncteur. La prise d’alimentation ou le disjoncteur multipolaire

utilisé pour le branchement doit rester à tout moment accessible après

installation de l’appareil.

• Le débranchement doit se faire à l’aide soit de la prise d’alimentation,

soit d’un interrupteur installé sur le circuit électrique fixe,

conformément aux normes électriques.

• Si le câble d’alimentation est endommagé, il doit être remplacé par un

câble ou un faisceau de câbles spécial disponible auprès du fabricant ou

du service après-vente.

• Le câble d’alimentation requis est le H05V2V2-F.

• Cette opération doit être exécutée par le personnel qualifié. Le

La page charge ...

ROSIERES RFC3371IN WIFI Manuel utilisateur

Marque: ROSIERES

Modèle: RFC3371IN WIFI

Catégorie: Fours

Taper: Manuel utilisateur

Ce manuel convient également à

RFC33IN WIFI

Télécharger le PDF

rapport

dans d''autres langues

English: ROSIERES RFC3371IN WIFI User manual

ROSIERES RFC3371IN WIFI Manuel utilisateur

Ce manuel convient également à

ROSIERES RFC3371IN WIFI Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents