Kenmore DU4080 Mode d'emploi

Catégorie
Aspirateurs
Taper
Mode d'emploi
Model/Modelo/Modèle: DU4080
Bagless Vacuum with
www.kenmorefloorcare.com
Vacuum Cleaner Help Line:
1-877-531-7321 (US) / 1-844-608-3081 (CA)
8:00am-5:00pm EST, M-F
Use & Care Guide
Manual de Uso y Cuidado
Manuel d'entretien et d'utilisation
Aspiradora Sin Bolsa Con
Aspirateur Sans Sac Avec
- 2 -
Before Using Your New Vacuum Cleaner ........................................................................ 2
Packing List ..................................................................................................................... 2
Important Safety Instructions ........................................................................................3-4
Vacuum Cleaner Warranty .............................................................................................. 5
Parts and Features ........................................................................................................6-7
Assembly Instructions ...................................................................................................8-9
Operating Instructions ............................................................................................... 10-15
Performance/Safety Features .........................................................................................16
Vacuum Maintenance and Care .................................................................................17-23
Troubleshooting ........................................................................................................24-25
Requesting Assistance or Service ......................................................................Back Cover
TABLE OF CONTENTS
PACKING LIST
Your KENMORE BAGLESS UPRIGHT VACUUM CLEANER is packaged with the following
parts and components assembled separately in the carton:
1 Upright Vacuum Cleaner (with
Motorized Nozzle)
1 Handle
1 Flexible Hose
1 Wand
Read this Use & Care Guide. It will help you assemble and operate your new Kenmore
vacuum cleaner in the safest and most effective way.
For more information about vacuum cleaner care and operation, call the Vacuum Cleaner
Help Line at 1-877-531-7321 (US) / 1-844-608-3081 (CA). You will need the complete model
and serial numbers when requesting information.
Your vacuum cleaner’s model and serial numbers are located on the Model and Serial
Number Plate. Use the space below to record the model number and serial number of your
new Kenmore vacuum cleaner.
Model No.____________________________________________
Serial No. ____________________________________________
Date of Purchase ______________________________________
Keep this book and your sales check (receipt) in a safe place for future reference.
BEFORE USING YOUR NEW VACUUM CLEANER
1 3-in-1 Combination Tool
1 Upholstery Tool
1 Use & Care Guide
- 3 -
WARNING!
Your safety is important to us. To reduce the risk of fire, electrical shock, injury to persons
or damage when using your vacuum cleaner, follow basic safety precautions including the
following:
IMPORTANT SAFETY INSTRUCTIONS
• Use your vacuum cleaner only as
described in this Use & Care Guide. Use
only with manufacturer’s recommended
attachments.
• Disconnect electrical supply before
servicing or cleaning out the brushroll
area. Failure to do so could result in the
brushroll unexpectedly starting, causing
personal injury from moving parts.
• Do not leave vacuum cleaner when
plugged in. Unplug from outlet when
not in use and before performing
maintenance.
• To reduce the risk of electrical shock - Do
not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close
attention is necessary when used by or
near children.
• Do not use with a damaged cord or plug.
If vacuum cleaner is not working as it
should, has been dropped, damaged,
left outdoors, or dropped in water,
immediately discontinue use and call
1-877-531-7321 (US) / 1-844-608-3081
(CA) for assistance.
• Do not pull or carry by cord, use cord as
a handle, close a door on cord, or pull
cord around sharp edges or corners. Do
not run vacuum cleaner over cord. Keep
cord away from heated surfaces.
• Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
• Do not handle plug or vacuum cleaner
with wet hands.
• Do not put any objects into openings.
• Do not use with any opening blocked;
Read all instructions in this guide before assembling or using your vacuum cleaner.
keep free of dust, lint, hair, and anything
that may reduce air flow.
• Keep hair, loose clothing, fingers, and all
parts of body away from openings and
moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not put on chairs, tables, etc. Keep on
floor.
• Do not use vacuum cleaner to pick
up flammable or combustible liquids
(gasoline, cleaning fluid, perfumes,
etc.), or use in areas where they may be
present. The fumes from these substances
can create a fire hazard or explosion.
• Do not pick up anything that is burning or
smoking, such as cigarettes, matches, or
hot ashes.
• Do not use vacuum cleaner without dust
cup and/or filters in place.
• Always clean the dust cup after
vacuuming carpet cleaners or freshener,
powders, and fine dust. These products
clog the filters, reduce airflow and can
cause damage to the vacuum cleaner.
Failure to clean the dust cup could cause
permanent damage to the vacuum
cleaner.
• Do not use the vacuum cleaner to pick
up sharp hard objects, small toys, pins,
paper clips, etc. They may damage the
vacuum cleaner or dust cup.
• You are responsible for making sure
that your vacuum cleaner is not used by
anyone unable to operate it properly.
- 4 -
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Proper assembly and safe use of your vacuum cleaner are your responsibilities. Your vacuum
cleaner is intended for Household use. Read this Use & Care Guide carefully for important
use and safety information. This guide contains safety statements under warning and caution
symbols.
AllergenSeal™ system lets you know that this vacuum traps 99.97% of dust and particles
down to 0.3 microns inside your vacuum, keeping them out of the air you breathe.
- 5 -
VACUUM CLEANER WARRANTY
LIMITED WARRANTY
FOR ONE YEAR from the date of sale this product is warranted against defects in material
or workmanship.
WITH PROOF OF SALE a defective product will be replaced free of charge.
The Kenmore brand is used under license. Direct all claims for warranty service to:
1-877-531-7321 (US) / 1-844-608-3081 (CA).
This warranty does not cover filters or belts, which are expendable parts that can wear
out from normal use within the warranty period.
This warranty is void if this product is ever used for other than private household purposes.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
Cleva North America, Inc., Greenville SC 29607
- 6 -
PARTS AND FEATURES
It is important to know your vacuum cleaner’s parts and features to assure its proper and
safe use. Review these before using your vacuum cleaner.
REPLACEMENT PARTS
To order a replacement part, call 1-877-531-7321 (US) / 1-844-608-3081 (CA).
Item Part No.(US) Part No.(CA)
Foam Filter 561055105 561055105
Felt Filter 561055106 561055106
HEPA Media Exhaust Filter 571022102 571022102
Wand 571022103 571022103
Handle 571022104 571022104
Flexible Hose 571022105 571022105
3-in-1 Combination Tool 561055134 561055134
Upholstery Tool 561055176 561055176
- 7 -
PARTS AND FEATURES
Flexible
Hose
Wand
Release
Button
Upholstery Tool
On/Off
Switch
Accessory
Storage
Connection
Hose
3-in-1 Combination Tool
Handle
Wand
Suction
Control
Carrying
Handle
Dust Cup
Release
Button
Dust Cup
Exhaust Filter
Cover (HEPA
Media Exhaust
Filter Inside)
Motorized
Nozzle
Brushroll
Indicator
Light
Lower
Cord
Hook
Power
Cord
Upper
Cord
Hook
Headlight
Dust Cup
Lid Release
Button
Handle
Release
Button
Motorized
Nozzle
Release
Pedal
- 8 -
1. Insert the handle into the wand until you
hear a ‘click’.
To remove: Press handle release button
and pull up on handle.
2. Insert the wand into the main body until
you hear a ‘click’.
3. Insert one end of the flexible hose into
the main body as shown until you hear
a ‘click’. Insert the other end of the hose
into the handle until you hear a ‘click’.
Before assembling the vacuum cleaner, check the PACKING LIST (page 2). Use this list to
verify that you have received all the components of your new Kenmore Bagless Upright
Vacuum Cleaner.
Please pay special attention to these hazard alert boxes, and follow any
instructions given. WARNING statements alert you to such hazards as fire,
electric shock, burns and personal injury. CAUTION statements alert you to
such hazards as personal injury and/or property damage.
ASSEMBLY INSTRUCTIONS
Handle
Release
Button
6. Lock power cord plug onto the power
cord.
- 9 -
4. Insert the combination tool and the
upholstery tool onto the accessory
storage posts located on the back of the
main body.
WARNING
Electrical Shock and Personal Injury
Hazard
Wrapping the cord too tightly with
excessive stress on the cord may cause
cord damage. A damaged cord is an
electrical shock hazard and could cause
personal injury or damage.
ASSEMBLY INSTRUCTIONS
5. Make sure the upper cord hook is in
the proper position as shown. Wrap the
power cord loosely around the upper
and lower cord hooks.
NOTE: Make sure to wrap the power
cord around the upper cord hook first, and
then around the lower cord hook to avoid
damaging the power cord.
Power Cord
Plug
Power Cord
Upper
Cord
Hook
1. Turn the upper cord hook to either side
and down to release the power cord.
- 10 -
CAUTION
Moving parts! To reduce the risk of personal injury, DO
NOT touch the brushroll when vacuum is on. Contacting the
brushroll while it is rotating can cut, bruise or cause other
injuries. Always turn off after operation. Use caution when
operating near children or pets.
OPERATING INSTRUCTIONS
POWER CORD – RELEASE & USE
Upper Cord
Hook
WARNING
To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). This plug
will fit in a polarized outlet only one
way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to
install the proper outlet. Do not change
the plug in any way.
2. Detach the power cord plug from the
power cord.
3. Be sure the power cord is locked into
the upper locking notch as shown. This
will help manage the power cord when
operating the vacuum cleaner.
4. Plug the power cord plug into an outlet
located near the floor.
Upper
Locking
Notch
WARNING
Personal Injury and Product Damage
Hazard
· When any abnormality/failure occurs,
stop using the product immediately and
disconnect the power plug.
· DO NOT use outlets above counters.
Damage from cord to items in
surrounding area could occur.
5. Press the On/Off switch to turn the
vacuum cleaner on.
UPRIGHT MODE
NOTE: Make sure the vacuum cleaner
is completely assembled and the dust cup
is empty before using. Do not operate
vacuum cleaner without filters in place.
1. Release the handle by placing foot on
the nozzle and pull back to change
handle position.
2. Turn on the vacuum cleaner by pressing
the On/Off switch to the “I” position
for cleaning bare floors and small area
rugs.
NOTE: The brushroll does not rotate
when the vacuum cleaner is in the “I”
position.
3. Press the switch to the “II” position for
cleaning carpets or rugs.
NOTE: The brushroll rotates when the
vacuum cleaner is in the “II” position.
- 11 -
POWER CORD - RELEASE & USE
OPERATION MODES
WARNING
Electrical Shock and Personal Injury
Hazard
Wrapping the cord too tightly puts stress
on the cord and can cause cord damage.
A damaged cord is an electrical shock
hazard and could cause personal injury
or damage.
6. Once you have completed vacuuming,
press the On/Off switch; unplug the
power cord plug from the outlet.
7. To restore power cord after use, turn
upper cord hook to the upright position.
Then wrap cord loosely around cord
hooks.
On/Off
Switch
ABOVE FLOOR MODE
1. Place the vacuum cleaner in the upright
locked position.
2. Press the wand release button and lift up
the wand for above floor cleaning.
3. Choose the desired attachment and
insert it into the wand.
4. Once the vacuum is on, operate the
vacuum cleaner by tilting the wand back
towards you and the nozzle is flush with
floor surface.
NOTE: Brushroll does not rotate in either
mode when handle is in fully upright
position.
5. Once you have completed vacuuming,
switch to the “O” position and unplug
the power cord from the power outlet.
NOTE: Select the right mode when
using this vacuum cleaner. Do not press the
switch to the “II” position when cleaning
the bare floor, otherwise it will damage
the floor.
BRUSHROLL INDICATOR LIGHT
4. Turn on the vacuum cleaner by pressing
the switch to the “I” position.
5. Once you have completed vacuuming,
switch to the “O” position and unplug
the power cord from the power outlet.
NOTE: The attachment also can insert
directly into the handle for above floor
cleaning.
CAUTION
Do not allow the vacuum cleaner to
remain in one spot for any length of time
when the brushroll is turning. Damage
to carpet may occur.
- 12 -
OPERATION MODES
Light Color
Status
Green,
Continuous The brushroll is spinning and
working as it should.
Red, Continuous
There is a jam in the
brushroll area. Turn off and
unplug the vacuum, and
remove any blockages in
the nozzle.
No Light The brushroll is off.
Brushroll
Indicator
Light
Wand Release Button
Handle
3-1 Combination
Tool
3-1 Combination
Tool
Wand
3. Press the wand release button and lift
up the wand for cleaning stairs or other
hard to reach places.
NOTE: Make sure the power cord is
released from the cord hooks before lifting
up the wand.
LIFT-UP MODE
1. Place the vacuum cleaner in the upright
locked position.
2. Press motorized nozzle release pedal
with foot to detach and raise vacuum
body from motorized nozzle for
portable carry.
4. Choose the desired attachment and
insert it into the wand.
5. Turn on the vacuum cleaner by pressing
the switch to the “I” position.
6. Once you have completed vacuuming,
switch to the “O” position and unplug
the power cord from the power outlet.
NOTE: The attachment also can insert
directly into the handle.
- 13 -
CAUTION
When using attachments, be careful not
to over extend the flexible hose when
reaching. Trying to reach beyond the
hose stretch capability could cause the
vacuum cleaner to tip over.
CAUTION
DO NOT pull the vacuum cleaner
around the room by the hose. Property
damage or personal injury could result.
OPERATION MODES
Motorized
Nozzle
Release
Pedal
All included attachment tools can be
inserted into either the handle or the wand.
3-IN-1 COMBINATION TOOL
The 3-in-1 combination tool can be
attached to the end of the handle and the
wand. Slide the collar of the tool over the
open end of the handle or wand.
Use the 3-in-1 combination tool in crevice
tool mode for cleaning in tight spaces such
as furniture, between cushions, and stairs.
See ATTACHMENT USE TABLE (page 15).
Press the release button to remove the
brush tool. Set the combination tool in
upholstery brush mode as shown. Use
in upholstery brush mode for cleaning
fabric surfaces such as fabric sofa. See
ATTACHMENT USE TABLE (page 15).
Set the combination tool in dusting brush
mode by pressing the release button and
sliding the dusting brush side of the brush
tool to the end of the combination tool.
Use in dusting brush mode for cleaning
loose surfaces such as drapes. See
ATTACHMENT USE TABLE (page 15).
- 14 -
OPERATION MODES
CAUTION
When using attachments, be careful not
to over extend the stretch hose when
reaching. Trying to reach beyond the
hose stretch capability could cause the
vacuum cleaner to tip over.
CAUTION
DO NOT pull the vacuum cleaner
around the room by the hose. Property
damage or personal injury could result.
ATTACHMENTS
Release Button
Dusting
Brush
Upholstery
Brush
UPHOLSTERY TOOL
The upholstery tool can be attached to the
end of the handle and the wand. Slide the
collar of the tool into the open end of the
handle or wand.
Use the upholstery tool for cleaning
fabric surfaces such as fabric sofa and
bedsheets. See ATTACHMENT USE TABLE
(page 15).
To return the combination tool to crevice
tool mode, press the release button and
slide the brush tool down the combination
tool.
*Always clean attachments before using on fabrics.
- 15 -
ATTACHMENTS
CAUTION
Use attachments when the vacuum
cleaner is upright.
ATTACHMENT USE TABLE
= Applicable
ATTACHMENT
CREVICE TOOL
DUSTING BRUSH
UPHOLSTERY BRUSH
Between
Furniture* Cushions* Drapes* Stairs
Baseboards
Carpet Bare
CLEANING AREA
UPHOLSTERY TOOL
BRUSHROLL RESET
The brushroll has built-in protection against
motor damage should the brushroll jam.
If the brushroll slows down or stops, the
brushroll overload protector shuts off the
brushroll motor and the brushroll indicator
light emits a red light. The vacuum cleaner
suction motor will continue to run.
SUCTION CONTROL
To assist with push/pull force of the
vacuum on surfaces like thick carpet, the
suction control valve can be opened to
help reduce suction. Note that for best
cleaning results, the suction control valve
must be fully closed.
· Slide to "Min" to open the suction control
and decrease suction. Opening control
decreases suction for draperies and
lightweight rugs.
· Slide to "Max" to close the suction control
and increase suction. Closing control
increases suction for upholstery and
carpets.
PERFORMANCE/SAFETY FEATURES
THERMAL PROTECTOR
This vacuum cleaner has a thermal
protector which automatically trips to
protect the vacuum cleaner suction motor.
If a clog prevents the normal flow of air to
the motor, the thermal protector turns the
motor off automatically. This allows the
motor to cool in order to prevent possible
damage to the vacuum cleaner.
To reset thermal protector: Turn the
vacuum cleaner off and unplug the power
cord from the outlet to allow the vacuum
cleaner to cool and the thermal protectors
to reset.
CAUTION
Always return the vacuum cleaner to
the upright position before using the
hose and attachments. Failure to do
so may result in overheating of the
brushroll motor and can cause the
thermal protectors to trip.
Check for and remove clogs, and empty
the dust cup if necessary. Also check
and clean any clogged filters. Wait
approximately 50 minutes before restarting
vacuum cleaner.
To correct problem: Turn off and unplug
vacuum cleaner, remove obstruction, then
turn on the vacuum cleaner again. The
brushroll indicator light will be off.
NOTE: Once the brushroll motor shuts
down, clear jam from brushroll and then
restart the vacuum cleaner. If the problem
persists, contact the vacuum cleaner help
line for assistance.
- 16 -
Brushroll
Indicator
Light
Suction
Control
Min
Max
1. Turn off and unplug vacuum cleaner. DO
NOT drip water on vacuum cleaner.
2. To clean exterior, or to reduce static
electricity and dust build-up, wipe outer
surface with a clean, soft cloth that has
been dipped in a solution of mild liquid
detergent and water, then wrung dry.
Wipe dry after cleaning.
NOTE: Wash attachments in warm
soapy water, rinse and air dry. Do not
clean in dishwasher.
1. Place attachments in storage position if
necessary (see page 9).
2. Gather the cord and wrap it loosely
around the upper and lower cord hooks.
Lock plug retainer onto the power cord.
3. Store the vacuum cleaner in a dry,
indoor area, on the floor with the handle
locked in the upright position.
- 17 -
Always follow all safety precautions when performing maintenance to the vacuum cleaner.
VACUUM MAINTENANCE AND CARE
WARNING
Electrical Shock and Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the vacuum cleaner. Failure to
do so could result in electrical shock or personal injury from vacuum cleaner suddenly
starting.
CLEANING EXTERIOR AND ATTACHMENTS
VACUUM CLEANER STORAGE
CAUTION
Do not use attachments if they are wet.
Attachments used in dirty areas, such as
under a refrigerator, should not be used
on other surfaces until they are washed.
They could leave marks.
WARNING
Electrical Shock and Personal Injury
Hazard
Wrapping the cord too tightly puts stress
on the cord and can cause cord damage.
A damaged cord is an electrical shock
hazard and could cause personal injury
or damage.
1. Press the dust cup release button to
remove the dust cup from the main body.
3. Position dust cup area of vacuum over
a waste receptacle. Press down on the
dust release button to open dust cup lid
and allow contents to drop into waste
receptacle.
2. Remove any clogs that might be located
in the suction port.
4. Shake the dust cup to release any debris
that might hang in the pre-filter.
5. Reinstall and insert the dust cup into the
slots on the bottom of the main body,
then press the dust cup into locked slot
and click into place.
NOTE: For best performance, empty
dust cup after every use. Never operate
vacuum cleaner without dust cup and
filters in place.
- 18 -
EMPTYING DUST CUP
WARNING
Always unplug power cord from
electrical outlet before performing any
service on vacuum cleaner.
Dust Cup
Release
Button
Dust Cup
I
II
Suction
Port
I
II
Dust
Release
Button
3. Clean pre-filter by gently tapping over a
trash container. Tap on several sides to
ensure best cleaning.
4. Reinstall the dust cup into the main
body. See installation instructions in the
EMPTYING DUST CUP (page 18).
The pre-filter is located inside the dust cup.
Clean the pre-filter as needed to optimize
suction power.
1. Remove the dust cup as outlined in the
EMPTYING DUST CUP (page 18).
NOTE: Make sure dust cup is free of
debris before opening.
2. Press the dust cup lid release button, and
open the lid.
Pre-fitler
It is recommended to clean the foam and
felt filters with cold water every three
months.
NOTE: When the cleaning of filters no
longer restores vacuum cleaner suction
to full power, or the filters are worn or
broken, replace the filters. To purchase
filters, call 1-877-531-7321 (US) / 1-844-
608-3081 (CA).
Regularly clean and replace the filters to
keep the vacuum's suction power optimal.
1. Remove the dust cup as outlined in the
EMPTYING DUST CUP (page 18).
2. Remove the foam and felt filters.
- 19 -
PRE-FILTER CLEANING
Dust Cup Lid
Release Button
FOAM AND FELT FILTERS CLEANING
Foam Filter
Felt Filter
5. Reinstall the dust cup. See EMPTYING
DUST CUP (page 18).
3. Wash with cold water only. DO NOT
use detergent or soap. Squeeze by hand
and allow to air dry. Allow all filters to
dry 24 hours before putting back into
vacuum cleaner.
NOTE: DO NOT operate without foam
and felt filters installed.
DO NOT wash in the dishwasher.
DO NOT install foam and felt filters if
damp.
4. Replace foam and felt filters into the
vacuum cleaner.
It is recommended to clean the HEPA
media exhaust filter with cold water every
year.
NOTE: When the cleaning of the filter
no longer restores vacuum cleaner suction
to full power, or the filter is worn or broken,
replace the exhaust filter. To purchase the
exhaust filter, call 1-877-531-7321 (US) /
1-844-608-3081 (CA).
1. Remove exhaust filter cover by pulling
the tab outward at the bottom of the
cover.
- 20 -
Foam Filter
Felt Filter
FOAM AND FELT FILTERS CLEANING
HEPA MEDIA EXHAUST FILTER CLEANING
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76

Kenmore DU4080 Mode d'emploi

Catégorie
Aspirateurs
Taper
Mode d'emploi

dans d''autres langues