DEPSTECH WF010 Manuel utilisateur

Marque: DEPSTECH

Modèle: WF010

Catégorie: Téléphones portables

Taper: Manuel utilisateur

Multi-Language User Manual

FHD Inspection Camera

WF010

01 - 11

12 - 22

23 - 33

34 - 44

45 - 55

56 - 65

Catalog

[email protected]

Facebook Official Page: @DEPSTECH. FANS

www.depstech.com

English

Product Structure

1. Power Button ON / OFF

2. Camera LEDs dimmer:

Roll to control the brightness of the camera LEDs

3. WiFi signal indicator:

Blue LED flash: Ready to pair

Blue LED stay on: Connect successfully

4. Power indicator:

Red LED stay on: Power system work normally

Red LED flash: Low battery

Green LED stay on: Charging status

5. Reset Button:

Long press the reset button for 7Sthe product will restore

to factory settings.

6. Micro-USB charging port

1 2 5

Step 1- APP Downloading

After downloading the APP, it is necessary to register a personal

account before using.

Fill in email - fill in password - view agreement - click register.

Please log in after successful registration. (Note: Please keep your

mobile phone connected with network during registration)

For iOS user (iOS 9+), search and download

“DEPSTECH-View” app from APP Store.

For Android user (Android 7.0+), search and download

“DEPSTECH-View” from Google Play Store.

iOS & Android

Android iOS

Step 2- Power on

Push the power button to “ON” to open the endoscope.

Step 3- WiFi Connection

A. Turn to the WiFi setting on your smart devices (Android /

iOS phone), search for the factory setting WiFi SSID:

DEPSTECH_****** or Jetion_******

B. Then choose and fill the factory setting WiFi password:

12345678

Note: Before using the product for the first time, please fully charge it.

Note: “******” will be a series of random numbers& letters, and it

may take several seconds to wait for the WiFi signal and the wifi

connection. Please be patient for the process.

Blue Wi-Fi LED Indicator light

Red Power LED Indicator light

Step 4- Return to the APP

Note:

If the endoscope and your smart device connected successfully,

you can receive the real-time images of the endoscope via the

DEPSTECH-View APP, and the blue LED of the endoscope Wi-Fi

transmiter will stay on.

APP Introduction

Rotate Button: Click to rotate the image 90°

Photo Shoot Button: Click to take a photo

Record Button: Click to start / end a video record

Buttons Hidden Function:

Click the screen to hide / wake the buttons.

Zoom in / Zoom out Function:

Two fingers expand outwards to zoom in the real- time image.

Two fingers get close to zoom out the real- time image.

Gallery Button: Click to check the photos / videos

Setting Button: Click to enter the setting

APP Introduction (For WiFi SSID: DEPSTECH_******)

Resolution: Click to choose different resolution.

WiFi Setting: Click to modify the WiFi SSID and Password.

After setup please remember to click reset button.

Channel Switch: Click to switch 2.4G&5G WiFi signal.

Charging Guide

1. Connect the device to the DC 5V USB adapter for charging;

2. During the charging process, the green LED indicator light will be

steady on.

3. When the device is fully charged, the green LED indicator will go out.

Guide for Accessories Installation

Turn counterclockwise-remove

accessories

Turn clockwise-tighten

accessories

Optical sensor

Resolution

Viewing angle

Depth of field

Diameter of lens tube

Working voltage and current

Wi-Fi frequency bands

WiFi Transmission Distance

Waterproof Grade

CMOS

Max. 1920*1080px

67°±3°

1.18-3.15 in

0.334 in

DC 5V/2A

2.4G

16.5 ft (without any obstacles)

IP67 (for lens/tube only)

Product parameter

FAQ& Help

Q1: How to connect WiFi endoscope to "DEPSTECH-View"?

A1: 1. Make sure the device is fully charged, long press the power button

or press the switch to turn on the device. The WiFi module will turn

on about 15 seconds after turning on the device. You can observe

whether the WiFi signal light (blue light) of the device is always on.

If it is on, it indicates that the WiFi module is ready;

2. Enter the phone's "Settings" - "WiFi Connection" to find the WiFi

name printed on the device; select and connect, the default

password is "12345678". If the phone prompts "Internet may be

unavailable", please ignore the prompt and select "Keep

Connected";

3. Open this App and get real-time images of the endoscope. While

the App is acquiring the device image, the WiFi signal light will

flash. If the image cannot be obtained during the flashing process,

please contact the seller of the device.

Q2: The mobile phone cannot get the real-time image of the WiFi

endoscope or the screen went black?

A2: Please follow the steps below to solve the problems.

1. Please try to restart the device after fully charged.

2. There is a reset hole near the charging port of the device. Please

use reset pin to insert the reset hole. Please make sure that

you've reached the reset button with the reset pin, and the device

will turn on again.

3. Please turn off the "WiFi" function of other mobile phones that have

been connected to this WiFi endoscope at home.

4. Turn on the phone in airplane mode, search for the WiFi signal

identified on the device body, select and connect it, the default

password is "12345678";

5. It should be noted that during the installation of this App, you need

to authorize the "photo/media content" and "document storage"

permissions of this App, otherwise some functions such as taking

pictures/viewing albums may be hindered;

FAQ& Help

Q3: Can search for the Wi-Fi signal, but couldn’t get the connection?

A3:

Q4: When the product is in use, it flickers, freezes or disconnects?

A4:

1. The Wi-Fi connection may be failing, you’ve to forget the network

and reconnect it. Also, you can change to an some place without

Wi-Fi distribute and retry the connection.

2. For Android user, at the first time of connecting to the Wi-Fi

signal, the phone may tip "Internet may not be available", please

click "Keep Wi-Fi connection" option.

3. For iOS user, please make sure that you’ve turn on the "Cellular

data" and "Native network" option in the settings -

“DEPSTECH-View”.

4. For user who used to modified the Wi-Fi-SSID / password before,

please use a reset pin and plug it into the reset port of the

endoscope. You can refer to lable on the bottom to the default

Wi-Fi SSID / Password and reconnect it.

1. Please make sure that the Wi-Fi endoscope is within 5 meters of

your mobile phone and there is no obstacle between them.

2. When using this Wi-Fi endoscope, please stay away from other

hotspots with strong Wi-Fi signal, or turn off other hotspots.

3. Check whether the power of the device is normal and whether the

power indicator is flashing; if the power is insufficient, please fully

charge it before use;

Note:

If the malfunction cannot be solved after the above operations,

please contact us via email [email protected]

6. For iOS users(especially iOS 14), please enter the "Settings"

interface of the phone, find and click “DEPSTECH-View”, then

turn on the "Cellular Data" and "Native network"option, otherwise

it may not be able to establish communication with the device.

SAFETY & MAINTENANCE INFO

Please remember to turn off the endoscope and place it in a dry environment

after per use. You can use soft cotton cloth with little alcohol to keep the

camera lens clear, which also does great help to capture the best image.

Besides, for every three month you should charge and use your electric

devices regularly, which will do great help to extend the battery life.

The storage temperature should between 32-158℉. And the working

temperature should between 32-113℉. Besides, the Childs can only operate

this device with the guidance of adults, please don’t let them operate the

device alone.

Please keep the device away from fire source/ liquid/ acidic. These may

increase the risk of electrical shocks and damages of the device.

The unit is not shock-resistant. Please avoid high impact results from things

such as dropping the unit from height.

The lens and the tube are water resistant when the unit is fully assembled,

but the WiFi box isn’t. Which means IP67 waterproof only available for the

camera probe part, and the camera part support underwater inspections

within 3.33ft / 30 mins.

Note: Do not immerse the WiFi box in water

According to the guidance of WEEE, attention should be given to the

environmental aspects of battery disposal.

It's normal that the camera will turn hot, especially when the camera LED turn

to the brightest level, but it won’t affect the regular usage or the lifespan of

the endoscope.

The WiFi transmission distance is about 16.5ft without any obstacles. Please

keep the distance between WiFi box and the phone/ tablet within 16.5ft.

Please Keep the unit away from strong WiFi disturb area while using.

Otherwise, it may affect the WiFi connection between the WiFi box and the

smartphone.

For your safety and better using experience, please read the

instructions carefully before using.

FCC statement: This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

1) This device may not cause harmful interface;

2) This device must accept any interference received, including

interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set

forth for an uncontrolled environment. This equipment should be

installed and operated with a minimum distance of 20cm between

the radiator & your body. This transmitter must not be co-located or

operating in conjunction with any other antenna or transmitter.

2012/19/EU (WEEE directive): Products marked with this symbol

cannot be disposed of as unsorted municipal waste in the

European Union. For proper recycling, return this product to your

local supplier upon the purchase of equivalent new equipment, or

dispose of it at designated collection points. For more information

see: www.recyclethis.info

2013/56/EU (battery directive): This product contains a battery that

cannot be disposed of as unsorted municipal waste in the

European Union. See the product documentation for specific

battery information. The battery is marked with this symbol, which

may include lettering to indicate cadmium (Cd), lead (Pb), or

mercury (Hg). For proper recycling, return the battery to your

supplier or to a designated collection point. For more information

see: www.recyclethis.info

EU Conformity Statement

This product and - if applicable - the supplied accessories too are

marked with "CE" and comply therefore with the applicable

harmonized European standards listed under the EMC Directive

2004/108/EC, the RoHS Directive 2011/65/EU and Amendment

(EU) 2015/863.

Deutsch

Angabe über die Bestandteile des Produkts

1. Power-Taste ein / aus

2. Dimmer der Kamera-LED:

Scrollen Sie, um die Helligkeit der Kamera-LED zu steuern.

3. WiFi-Signalanzeige:

Blaue LED blinkt: Bereit zum Pairing

Blaue LED leuchtet immer: Verbindung ist erfolgreich

4. Betriebsanzeige:

Die rote LED leuchtet immer: Das Stromversorgungssystem

funktioniert normal

Rote LED blinkt: Batterie schwach

Grüne LED leuchtet immer: Ladestatus

5. Reset-Taste:

Drücken Sie lange die Reset-Taste für 7S, das Produkt wird

auf die Werkseinstellungen zurückgesetzt.

6. Mikro-USB-Ladeanschluss

1 2 5

Schritt 1 – App herunterladen

Registrierung

Nach dem Herunterladen der App müssen Sie ein persönliches Konto

registrieren, bevor Sie sie verwenden.

Registrierungs- und Anmeldemethode

Geben Sie bitte die E-Mail und das Passwort ein, lesen die Vereinbarung

und klicken Sie auf die Registrierung, dann ist sie erfolgt. Nach

erfolgreicher Registrierung können Sie sich anmelden. (Hinweis: Ihr

Handy muss bei der Registrierung mit Netzwerk verbunden werden.)

iOS Benutzer (iOS 9+) Können im App Store nach

„DEPSTECH-View“ App suchen und sie herunterladen.

Android Benutzer (Android 7.0+) Können im Google Play

Store nach „DEPSTECH-View“ suchen und sie herunterladen.

iOS & Android

Android iOS

Schritt 2 – Aktivierung des Gerätes

Drücken Sie den Netzschalter auf „ON“, um das Endoskop zu

öffnen.

Schritt 3- WiFi-Verbindung

A. Schalten Sie die WiFi-Einstellung auf Ihren Smart-Geräten

ein (Android / iOS phone), suchen Sie nach der Werksein-

stellung WiFi SSID: DEPSTECH_****** oder Jetion_******

B. Wählen Sie das WiFi-Passwort für die Werkseinstellung aus

und geben Sie das Passwort ein: 12345678

Hinweis: Bevor Sie das Produkt zum ersten Mal verwenden, laden

Sie es bitte vollständig auf.

Hinweis: „******“ ist eine Reihe von Zufallszahlen und Buchstaben, das

Warten auf das Wifi-Signal und der Verbindungsaufbau mit WiFi kann ein

paar Sekunden in Anspruch nehmen. Haben Sie bitte etwas Geduld für

diesen Prozess.

Blaue LED WiFi-Anzeige

Rote LED Power-Anzeige

Schritt 4- Zurück zur APP

Hinweis:

Wenn das Endoskop und Ihr Smartgerät erfolgreich verbunden

wurden, können Sie die Echtzeitbilder des Endoskops über die

DEPSTECH-View APP empfangen und die blaue LED des

Endoskop-WLAN-Senders leuchtet.

Erläuterung über die App

Funktion zum Verstecken der Buttons:

Durchs Klicken darauf werden die Buttons versteckt / aktiviert

Umdrehen-Button: Durchs Klicken darauf werden die Bilder um 90°

umgedreht

Fotoaufnahme-Button: Durchs Klicken darauf wird ein Foto aufgenommen

Videoaufnahme-Button: Durchs Klicken darauf wird eine Videoaufnahme

gestartet / beendet

Galerie-Button: Durchs Klicken darauf werden die Fotos / Videos angezeigt

Einstellung-Button: Durchs Klicken darauf wird das Einstellungsmenü

angezeigt

Hinein zoomen / Heraus zoomen:

Ziehen Sie mit zwei Fingern das Bild auseinander, um das Echtzeit-Bild hinein zu

zoomen.

Schieben Sie mit zwei Fingern das Bild zusammen, um das Echtzeit-Bild heraus zu

zoomen.

Erläuterung über die App (Für WiFI SSID: DEPSTECH_******)

Auflösung: Darauf Klicken zum Auswählen von unterschiedlichen

Auflösungen.

WiFi-Einstellung: Darauf Klicken zur Änderung des WiFi SSID und

Passworts. Nach der Einstellung vergessen Sie bitte nicht, auf den

Reset-Button zu klicken.

Kanalwechsel: Wenn es in der Nähe zu viel 2.4g&5g WiFi-Sig-

nalstörungen gibt, klicken Sie darauf.

Gegen den Uhrzeigersinn drehen

Im Uhrzeigersinn drehen

Installationsanleitung für Zubehöre

Ladeanleitung

1. Schließen Sie das Gerät zum Aufladen an den DC 5V USB-Adapter an;

2. Während des Ladevorgangs leuchtet die grüne LED-Kontrollleuchte

dauerhaft.

3. Wenn das Gerät vollständig aufgeladen ist, erlischt die grüne

LED-Anzeige.

Betrachtungswinkel

Tiefenschärfe

Diameter

WiFi-Frequenz

Schutzklasse

67°±3°

3-8cm

8.5mm

DC 5V/2A

2.4G

5m (ohne jegliche Hindernisse)

IP67(gilt nur für die Kamera)

1920*1080, 1600*1200, 1280*720, 640*480

Sensor CMOS

WiFi-Reichweite

Spezifikation

Auflösungsoptionen der Kamera

Betriebsspannung und Betriebsstrom

La page charge ...

DEPSTECH WF010 Manuel utilisateur

Marque: DEPSTECH

Modèle: WF010

Catégorie: Téléphones portables

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

italiano: DEPSTECH WF010 Manuale utente
English: DEPSTECH WF010 User manual
español: DEPSTECH WF010 Manual de usuario
Deutsch: DEPSTECH WF010 Benutzerhandbuch
日本語: DEPSTECH WF010 ユーザーマニュアル

DEPSTECH WF010 Manuel utilisateur

DEPSTECH WF010 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents