Vermont Castings PWR POD Charcoal Igniter Le manuel du propriétaire

Marque: Vermont Castings

Modèle: PWR POD Charcoal Igniter

Catégorie: Outils électroportatifs

Taper: Le manuel du propriétaire

BATTERY-POWERED FIRE STARTER

USER MANUAL

YOUR OPINON MATTERS

PLEASE LEAVE A REVIEW AT

WWW.CANADIANTIRE.CA

0850200

WELCOME TO VERMONT CASTINGS

There will always be those who go with the crowd, who do what

everyone else is doing. Even if that isn’t who they are, or who they

want to be. That’s never been us. At Vermont Castings, we believe

in being yourself, doing what you think is right at all times. That

you should be unapologetic and uncompromising in the pursuit

of doing your best. We aren’t afraid to follow our own path. For

us, that path began with ﬁre, and was lit with purpose. We believe

ﬁre ignites something inside of us that makes us human. We all

know there is a greater joy in the stories shared around ﬁre. More

comfort of the warmth provided by ﬁre. And better flavours in the

food prepared over ﬁre. Today we still have that ﬁre in our belly.

This ﬁre drives excellence into what we make, it gives us vision,

and provides unwavering belief. We believe people are drawn to

those who follow their convictions.

We exist to create and connection around food and flame.

WWW.VERMONTCASTINGSBBQ.COM

Founders Duncan Syme and Murray Howell had an idea that they could help their

neighbours keep their homes warm in the face of rising energy costs.

1975

@vermontcastingsbbq

www.vermontcastingsbbq.com

TABLE OF CONTENTS

GETTING STARTED

Peace of mind is priceless. Make sure you

know and understand the basics of safe use.

NEED-TO-KNOW SAFETY 5

GETTING SET UP 6

IGNITING LIKE A PRO

GETTING ACQUAINTIED WITH YOUR

FIRE STARTER 9

UNPACKING 10

OPERATION 12

TAKING CARE OF YOUR FIRE

STARTER

MAINTENACE 13

STORAGE 13

DISPOSAL 13

CUSTOMER SUPPORT

There when you need it. This crucial info may have

the answer you are looking for.

SERVICES 14

WARRANTY 15

Table of Contents

THE SYSTEM

READ THE OWNER'S MANUAL AND SAFETY INSTRUCTIONS CAREFULLY

BEFORE OPERATING THIS BATTERY-POWERED FIRE STARTER. COMPARE THE

ILLUSTRATION BELOW TO THE BATTERY-POWERED FIRE STARTER IN ORDER TO

FAMILIARIZE YOURSELF WITH THE LOCATION OF THE VARIOUS CONTROLS AND

ADJUSTMENTS. SAVE THIS MANUAL FOR FUTURE REFERENCE.

1. HEAT SHIELD

2. MODE SWITCH

3. HANDLE GRIP

4. BATTERY COMPARTMENT

5. STAND/BOTTLE OPENER

1 2 3 4

www.vermontcastingsbbq.com

SAFETY SYMBOLS

THE ABOVE SAFETY SYMBOLS AND DESCRIBES THAT MAY APPEAR ON THIS PRODUCT. READ,

UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS ON THE FIRE STARTER BEFORE ATTEMPTING TO

ASSEMBLE AND OPERATE.

FOR YOUR FAMILY’S SAFETY, PLEASE CHECK THE FOLLOWING:

READ THE OPERATOR'S MANUAL(S) – READ, UNDERSTAND,

AND FOLLOW ALL INSTRUCTIONS IN THE USER MANUAL(S)

BEFORE ATTEMPTING TO ASSEMBLE AND OPERATE.

SAFETY ALERT – INDICATES A

PRECAUTION, A WARNING, OR A DANGER.

WARNING! – DO NOT EXPOSE THE

UNIT TO RAIN OR WET CONDITIONS.

KEEP DRY.

WARNING! – ELECTRIC SHOCK HAZARD.

HOT SURFACE – TO REDUCE THE RISK

OF INJURY OR DAMAGE, AVOID CONTACT

WITH ANY HOT SURFACE.

INDOOR USE ONLY – ONLY USE BATTERY

CHARGER INDOORS.

BATTERY REMOVAL – REMOVE BATTERY WHILE NOT

IN USE AND WHILE STORING.

NEED TO KNOW SAFETY

SAFETY SYMBOLS

Table of Contents

GETTING STARTED

GETTING SET-UP

SAFETY INSTRUCTIONS

All operators must read these instructions before use.

Read all safety warnings and instructions. Failure to follow the

warnings and instructions may result in electric shock, ﬁre and/

or serious injury.

GENERAL SAFETY WARNINGS

Notice the personal safety alert symbol used in this manual

to draw your attention to a WARNING given along with the

particular operating instruction. This means that the operation

requires special ATTENTION, CAUTION, and AWARENESS.

When using this Fire Starter, basic safety precautions, including

the following, should always be followed to reduce the risk of

ﬁre, electric shock, personal injury and material damage.

WARNING! To reduce the risk of ﬁre or electric shock, do not

expose this product to rain or moisture. Store indoors.

Do not leave it outdoors.

WARNING! NEVER submerge the unit in any liquid.

WARNING! Be aware that heat from this tool could ignite

flammable materials in hidden areas such as walls, ceilings, floors or

soﬃt boards. The ignition of these materials may not be obvious and

could result in property damage and personal injury.

1. Read all of the instructions before using the Fire Starter.

2. To reduce the risk of injury, close supervision is necessary when

a Fire Starter is used near children.

3. Do not touch hot parts.

4. This Fire Starter is not intended to be used by persons (including

children) with reduced physical, sensory or mental capabilities,

or persons with lack of experience and knowledge, unless they

have been given supervision or instruction concerning the use of

the Fire Starter by someone responsible for their safety.

5. Children should be supervised to ensure that they do not play

with the Fire Starter.

6. Do not immerse in water.

7. For use only with PWR POD batteries and chargers.

8. Ensure that the Fire Starter is properly positioned before turning

on.

9. Do not allow the hot parts of the Fire Starter to touch any

flammable materials.

10. Allow the Fire Starter to cool completely before storage. Remove

the battery before storing the Fire Starter.

11. The supply terminals are not to be short-circuited.

Work Area Safety

1. Keep work area clean and well lit. Cluttered or dark areas invite

accidents.

2. Do not operate the Fire Starter in explosive atmospheres, such

as in the presence of flammable liquids, gases or dust.

3. Keep children and bystanders away while operating a Fire

Starter. Distractions can cause you to lose control.

Electrical Safety

WARNING! Read all safety warnings and instructions.

Failure to follow the warnings and instructions may result in electric

shock, ﬁre and/or serious injury.

1. Do not expose the Fire Starter to rain or wet conditions. Water

entering the unit will increase the risk of electric shock.

2. Recharge only with the charger speciﬁed by the manufacturer.

A charger that is suitable for one type of battery pack may

create a risk of ﬁre when used with another battery pack.

3. Use Fire Starter only with speciﬁcally designated battery

packs. Use of any other battery packs may create a risk of

injury and ﬁre.

4. When the battery pack is not in use, keep it away from other

metal objects, like paper clips, coins, keys, nails, screws or

other small metal objects that can make a connection from

one terminal to another. Shorting the battery terminals

together may cause burns or a ﬁre.

5. Do not use a battery pack or Fire Starter that is damaged

or modiﬁed. Damaged or modiﬁed batteries may exhibit

unpredictable behaviour resulting in ﬁre, explosion or risk of

injury.

6. Do not expose a battery pack or Fire Starter to ﬁre or

excessive temperature. Exposure to ﬁre or temperature above

130°C (265°F) may cause explosion.

7. Follow all charging instructions and do not charge the

battery pack or Fire Starter outside of the temperature

range speciﬁed in the instructions. Charging improperly or at

temperatures outside of the speciﬁed range may damage the

battery and increase the risk of ﬁre.

8. Do not modify or attempt to repair the Fire Starter or the

battery pack except as indicated in the instructions for use

and care.

Personal Safety

WARNING! Do not touch the Fire Starter barrel while

operating

and until unit is completely cooled down. Touching hot surface

can cause severe burns, personal injury or property damage.

1. Stay alert, watch what you are doing and use common sense

when operating the Fire Starter. Do not use the unit while

you are tired or under the influence of drugs, alcohol or

medication. A moment of inattention while operating the unit

may result in serious personal injury.

2. Do not abuse the Fire Starter. It will do the job better with

less likelihood of injury if it is used at the rate for which it was

designed.

3. Do not use the Fire Starter for any job except that for which it

is intended.

4. Do not use if the switch is broken. Any Fire Starter that

cannot be controlled by the switch is dangerous and must be

repaired.

5. Disconnect the battery pack from the Fire Starter before

making any adjustments, changing batteries or storing the

Fire Starter. Such preventative safety measures reduce the

risk of starting the Fire Starter accidentally.

6. Store the idle Fire Starter out of children’s reach and do

not allow persons unfamiliar with the Fire Starter or these

instructions to operate the Fire Starter. Fire Starters are

dangerous in the hands of untrained users.

7. Maintain the Fire Starter with care. Check for misalignment

or binding of moving parts, breakage of parts and any other

condition that may aﬀect the tool's operation. If damaged,

have the tool repaired before use. Many accidents are caused

by poorly maintained Fire Starters.

8. Keep the product dry, clean and free from oil and grease.

Always use a clean cloth when cleaning. Never use brake

fluids, gasoline, petroleum-based products, or any strong

solvents to clean your product. Following this rule will reduce

www.vermontcastingsbbq.com

the risk of loss of control and deterioration of the enclosure plastic.

9. Use the Fire Starter in accordance with these instructions and in the

manner intended for the particular use of the Fire Starter, taking into

account the working conditions and the work to be performed. Using

the tool for operations diﬀerent from those intended could result in a

hazardous situation.

10. Battery tools do not have to be plugged into an electrical outlet; therefore,

they are always in operating condition. Be aware of possible hazards when

not using your battery tool or when changing accessories. Following this

rule will reduce the risk of electric shock, ﬁre, or serious personal injury.

11. The unit can becomes very hot. Do not lay the Fire Starter on flammable

surfaces while operating or immediately after shutting oﬀ. Always set it on

the stand with the outlet tip pointing in a safe direction.

12. Never point the tool at yourself or others.

Battery & Charger

Safety Instructions

A battery pack and charger have NOT been supplied with your Battery-powered

Fire Starter. Only use compatible PWR POD series batteries.

Despite all the safety precautions, caution must always be exercised when

handling batteries. The following points must be obeyed at all times to ensure

safe use. Safe use can only be guaranteed if undamaged cells are used.

Incorrect handling of the battery pack can cause cell damage.

IMPORTANT! Analyses conﬁrm that incorrect use and poor care of high-

performance batteries are the main factors responsible for personal and/or

product damage.

WARNING! Use only approved PWR POD batteries; other batteries may

damage the power tool and cause it to malfunction, which can lead to serious

personal injury.

WARNING! Do not use a battery pack or Fire Starter that is damaged or

modiﬁed. Damaged or modiﬁed batteries may exhibit unpredictable behaviour

resulting in ﬁre, explosion or risk of injury.

Do not modify or attempt to repair the Fire Starter or the battery pack except

as indicated in the instructions for use and care.

Have your battery pack serviced by a qualiﬁed repair person using only

identical replacement parts. This will ensure that the safety of the battery pack

is maintained.

CAUTION! To reduce the risk of injury, charge the battery pack only in its

designated charger. Other types of chargers present risk of ﬁre, personal injury

and damage. Do not wire a battery pack to a power supply plug or car cigarette

lighter. Such misuse will permanently disable or damage the battery pack.

• Avoid dangerous environments – Do not charge the battery pack in rain,

snow or in damp or wet locations.

• Charge in a well-ventilated area – Do not block the charger vents. Keep

them clear to allow for proper ventilation. Do not allow smoking or open

flames near a charging battery pack. Vented gases may explode.

NOTE: The safe temperature range for the battery is 5°C – 40.5°C (41°F –

105ºF). Do not charge the battery outside in freezing weather; charge it at room

temperature.

• Maintain charger cord – When unplugging the charger, pull the plug,

not the cord, from the receptacle to reduce the risk of damage to the

electrical plug and cord. Never carry the charger by its cord or yank it by

the cord to disconnect it from the receptacle. Keep the cord away from

heat, oil and sharp edges. Make sure the cord will not be stepped on,

tripped over or subjected to damage or stress when the charger is in use.

Do not use the charger with a damaged cord or plug. Replace a damaged

charger immediately.

• Do not use an extension cord unless it is absolutely necessary – Using the

wrong, damaged or improperly wired extension cord poses a risk of ﬁre

and electric shock.

• If an extension cord must be used, plug the charger into a properly wired

16 gauge or larger extension cord with the female plug matching the

male plug on the charger. Make sure that the extension cord is in good

electrical condition.

• The charger must be plugged into an appropriate receptacle.

• Use only recommended attachments – Use of an attachment

not recommended or sold by the battery charger or battery pack

manufacturer may result in risk of ﬁre, electric shock or personal injury.

• Unplug charger when not in use – Make sure to disconnect battery pack

from unplugged charger.

WARNING! To reduce the risk of electric shock, always unplug the

charger before performing any cleaning or maintenance. Do not allow water to

flow into the charger. Use a Ground Fault Circuit Interrupter (GFCI) to reduce

shock hazards.

• Under abusive conditions, liquid may be ejected from the battery; avoid

contact. If contact accidentally occurs, flush with water. If liquid contacts

eyes, additionally seek medical help. Liquid ejected from the battery may

cause irritation or burns.

• Do not burn or incinerate battery pack – Battery pack may explode,

causing personal injury or damage. Toxic fumes and materials are

created when battery packs are burned.

• Do not crush, drop or damage battery pack – Do not use the battery

pack or charger if they have sustained a sharp blow, been dropped, run

over or have been damaged in any way (i.e., pierced with a nail, hit with a

hammer, stepped on, etc.).

• Do not disassemble – Incorrect reassembly may pose a serious risk of

electric shock, ﬁre or exposure to toxic battery chemicals. If the battery

or charger is damaged, call the customer service centre at 1-844-586-

4660 for assistance.

• Battery chemicals cause serious burns – Never let a damaged battery

pack contact the skin, eyes or mouth. If a damaged battery pack leaks

battery chemicals, use rubber or neoprene gloves to safely dispose of it.

If skin is exposed to battery fluids, wash the aﬀected area with soap and

water and rinse with vinegar. If eyes are exposed to battery chemicals,

immediately flush with water for 20 minutes and seek medical attention.

Remove and dispose of contaminated clothing.

• Do not short circuit – When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys, nails, screws or other

small metal objects that can make a connection from one terminal to

another. Shorting the battery terminals together may cause burns or a

ﬁre.

• Store your battery pack and charger in a cool, dry place – Do not store

the battery pack or charger where temperatures may exceed 40.5°C

(105°F), such as in direct sunlight or inside a vehicle or metal building

during the summer.

Information about the battery

1. For optimum battery performance, avoid low discharge cycles by

charging the battery pack frequently.

2. Store the battery pack in a cool place, ideally at 25°C (77°F) and charged

to at least 40%.

3. Lithium-ion batteries are subject to a natural aging process. The battery

pack must be replaced at the latest when its capacity falls to just 80%

of its capacity when new. Weakened cells in an aged battery pack are no

longer capable of meeting the high power requirements needed for the

proper operation of your Battery-powered Fire Starter, and therefore

pose a safety risk.

GETTING STARTED

Table of Contents

4. Do not throw the battery pack into an open ﬁre as this poses a risk

of explosion.

5. Do not ignite the battery pack or expose it to ﬁre.

6. Do not exhaustively discharge batteries. Exhaustive discharge will

damage the battery cells. The most common cause of exhaustive

discharge is lengthy storage or non-use of partially discharged

batteries. Stop working as soon as the performance of the battery

falls noticeably or the electronic protection system triggers. Store

the battery pack in a cool place, ideally at 25°C (77°F) and charged

to at least 40%.

7. Protect the battery and the tool from overloads. Overloads will

quickly result in overheating and cell damage inside the battery

housing even if this overheating is not apparent externally.

8. Avoid damage and shocks. Immediately replace batteries that have

been dropped from a height of more than 3' (1 m) or those that have

been exposed to violent shocks, even if the housing of the battery

pack appears to be undamaged. The battery cells inside the battery

may have suﬀered serious damage. In such instances, please read

the waste disposal information for proper battery disposal.

9. If the battery pack suﬀers overloading and overheating, the

integrated protective cutoﬀ will switch oﬀ the equipment for safety

reasons.

IMPORTANT! Do not press the power supply button any more if the

protective cut-oﬀ has been activated. This may damage the battery

pack.

10. Recharge only with the charger speciﬁed by the manufacturer. A

charger that is suitable for one type of battery pack may create a

risk of ﬁre when used with another battery pack.

11. Use Fire Starters only with speciﬁcally designated battery packs.

Use of any other battery packs may create a risk of injury and ﬁre.

12. Under abusive conditions, liquid may be ejected from the battery;

avoid contact. If contact accidentally occurs, flush with water. If

liquid contacts eyes, additionally seek medical help. Liquid ejected

from the battery may cause irritation or burns.

13. Do not use a battery pack or Fire Starter that is damaged or

modiﬁed. Damaged or modiﬁed batteries may exhibit unpredictable

behaviour resulting in ﬁre, explosion or risk of injury.

14. Do not expose a battery pack or Fire Starter to ﬁre or excessive

temperature. Exposure to ﬁre or temperature above 130°C (265°F)

may cause explosion.

15. Follow all charging instructions and do not charge the battery pack

or Fire Starter outside of the temperature range speciﬁed in the

instructions. Charging improperly or at temperatures outside of

the speciﬁed range may damage the battery and increase the risk

of ﬁre.

Information about the charger and the charging

process

The charger is NOT supplied with your cordless power tool. Only use the

compatible PWR POD charger.

1. Please check the data marked on the rating plate of the battery

charger. Be sure to connect the battery charger to a power supply

with the voltage marked on the rating plate. Never connect it to a

diﬀerent mains voltage.

2. Protect the battery charger and its cord from damage. Keep the

charger and its cord away from heat, oil and sharp edges.

3. Electrical plugs must match the outlet. Never modify the plug in

any way. Do not use any adapter plugs with grounded Fire Starters.

Unmodiﬁed plugs and matching outlets will reduce the risk of

electric shock.

4. Keep the battery charger, battery pack and the cordless tool out of

the reach of children.

5. Do not use the battery charger to charge other cordless tools.

6. During periods of heavy use, the battery pack will become warm. Allow

the battery pack to cool to room temperature before connecting with the

charger to recharge.

7. Do not overcharge batteries. Do not exceed the maximum charging

times. These charging times only apply to discharged batteries. Frequent

insertion of a charged or partially charged battery pack will result in

overcharging and cell damage. Do not leave batteries in the charger for

days on end.

8. Never use or charge the battery if you suspect that it has been more

than 12 months since the last time they were charged. There is a high

probability that the battery pack has already suﬀered dangerous damage

(exhaustive discharge).

9. Charging batteries at a temperature below 5°C (41°F) will cause chemical

damage to the cells and may cause a ﬁre.

10. Do not use batteries that have been exposed to heat during the charging

process, as the battery cells may have suﬀered dangerous damage.

11. Do not use batteries that have suﬀered curvature or deformation during

the charging process or those that exhibit other atypical symptoms

(gassing, hissing, cracking, etc.).

Protection from environmental influences

1. Protect your cordless tool and the battery charger from moisture and

rain. Moisture and rain can cause dangerous cell damage.

2. Do not use the cordless tool or the battery charger near vapours and

flammable liquids.

3. Use the battery charger and cordless tools only in dry conditions and at

an ambient temperature of 5°C – 40.5°C (41ºF – 105°F).

4. Do not keep the battery charger in places where the temperature is

liable to reach over 40.5°C (105°F). In particular, do not leave the battery

charger in a car that is parked in the sunshine.

5. Protect batteries from overheating. Overloads, overcharging and

exposure to direct sunlight will result in overheating and cell damage.

Never charge or work with batteries that have been overheated – replace

them immediately, if possible.

6. If the battery pack is below the normal temperature range, the red LED

will illuminate and the green LED will be oﬀ. When the battery warms to a

temperature of more than 5°C (41°F), the charger will automatically begin

charging.

7. Prevent the lithium-ion battery pack from freezing. Battery packs

that were stored below 0°C (32°F) for more than 60 minutes must be

discarded.

8. When handling batteries, be wary of electrostatic charge. Electrostatic

discharges can damage the electronic protection system and the battery

cells. Avoid electrostatic charging and never touch the battery poles.

GETTING STARTED

www.vermontcastingsbbq.com

GETTING ACQUAINTIED WITH YOUR

FIRE STARTER

Battery Voltage Max.

Air Speed Max.

Max. Temperature

2 Working Modes

Heating Element

Net Weight

20 V D.C.

55 km/h (35 mph)

800°C (1472°F)

Burn mode / Blow mode

Ferrochrome resistance wire

0.73 kg (1 lb 10 oz)

IGNITING LIKE A PRO

COMPATIBLE BATTERIES AND CHARGERS

Batteries Charger

PWR POD

2.0 Ah: 054-7563-0

4.0 Ah: 054-7564-8

5.0 Ah: 054-7558-4

8.0 Ah: 054-7569-8

90 W Fast Charger: 054-7565-6

Dual-Port Charger: 054-7567-2

4 Port Fast Charger: 054-7571-0

Note: Batteries with an Ah of 4.0 or higher are recommended for optimal runtime and performance.

Table of Contents

UNPACKING

CARTON CONTENTS

• Battery-powered Fire Starter, tool only

• Manual

1. Carefully remove the Battery-powered Fire Starter and check to see

that all of the above items are supplied.

2. Inspect the product carefully to make sure no breakage or damage

occurred during shipping. If you ﬁnd damaged or missing parts, DO

NOT return the unit to the store. Please call the customer service

centre at 1-844-586-4660.

NOTE: Do not discard the shipping carton and packaging

material until you are ready to use your new Battery-

powered Fire Starter. The packaging is made of

recyclable materials.

Properly dispose of these materials in accordance with

local regulations.

IMPORTANT! The equipment and packaging material are not

toys. Do not let children play with plastic bags, foils or small

parts. These items can be swallowed and pose a suﬀocation

risk!

TO PREPARE BATTERY

CAUTION:

1. Improper use of battery pack and charger can

result in electric shock and ﬁre.

2. Keep battery charger and pack dry. Avoid exposing

battery pack and charger to rain or wet conditions.

3. To reduce the risk of electric shock, do not allow

water to flow into AC plug.

4. Do not short circuit. Never place any object into the

battery pack terminals.

NOTE: Your battery must be charged before you can set up and start

your Battery-powered Fire Starter.

CHARGING BATTERY

NOTICE:

- To ensure the best performance, charge the battery completely

before ﬁrst use.

- Make sure the mains voltage is the same as rating label which is

located on the charger.

- Remove the battery pack from the charger after it has been fully

charged.

1. Align the raised electric contacts on the charging base with the

corresponding slots in the battery pack and slide the charging base

onto the battery pack.

2. Connect the charger to a power supply.

3. The charger will communicate with the battery pack’s circuitry to

evaluate the condition of the battery pack.

4. The fuel gauge LED lights on the battery will cycle from right to left

during charging. This is part of the normal charging operation.

5. After charging is complete, the green LED on the charger will be on

and the fuel gauge LED lights will turn oﬀ. The fuel gauge LED lights

will not be displayed when the fuel gauge button is pressed while

the battery pack is on the charger.

6. The battery pack will be fully charged but won’t be overcharged, if

left on the charger.

LED INDICATOR ON CHARGER

Battery

Pack Status Red LED Green

LED Explanation

Hot/cold

battery ON /

Charging will

begin when

battery returns

5°C (41°F) to

40°C

(104°F).

Defective

battery Flashing / Battery pack is

defective.

Charging / Flashing Charging

Fully

charged / ON Charging is

complete.

CHARGING A HOT BATTERY PACK

If the battery pack is above the normal temperature range, the red LED

will illuminate. When the battery pack cools down to approximately

40°C (104°F), the charger will automatically begin charging.

CHARGING A COLD BATTERY PACK

If the battery pack is below the normal temperature range, the red LED

will illuminate. When the battery warms to a temperature of more than

5°C (41°F), the charger will automatically begin charging.

DEFECTIVE BATTERY

If the charger detects a problem, the red LED will begin flashing.

1. If registering as defective, remove and reinsert the battery pack in

the charger. If the LED status reads “defective” a second time, try

to charge a diﬀerent battery pack.

2. If a diﬀerent battery pack charges normally, dispose of the

defective battery pack (see Maintenance section).

3. If a diﬀerent battery pack also indicates “defective,” the charger

may be defective.

BATTERY CHARGING

If the battery pack is within the normal temperature range, the green

LED will begin flashing.

BATTERY FULL

After the battery is fully charged, the green LED light on the charger will

be on.

CAUTION! FIRE HAZARD. When disconnecting the

charger from the battery, be sure to unplug the charger

from wall outlet.

The battery pack will fully charge, but will not

overcharge, if left on the charger.

Charger may warm with several continuous charge

cycles. This is part of the normal operation of the

charge. Always charge in a well-ventilated area.

CUSTOMER SUPPORT

www.vermontcastingsbbq.com

IGNITING LIKE A PRO

Timely recharging of the battery will help prolong the battery's life.

You must recharge the battery pack when you notice a drop in the

equipment's power.

INSTALL BATTERY

1. The battery bay is located on the bottom handle of the Battery-

powered Fire Starter. Check battery capacity and slide in the

battery pack until it locks with an audible "click". Verify it is securely

installed (Fig. 1).

2. To check the battery charge level, ﬁrst remove it from the battery

bay by pressing the release button. When the indicator button is

pressed, the display will show the current charge level. Three lights:

battery power is 60–80% charged; One light: power is 20–40%

charged. Power lower than 10% is possibly insuﬃcient to start the

Battery-powered Fire Starter.

Fig. 1

Battery bay

Table of Contents

OPERATION

The Battery-powered Fire Starter ignites charcoal with super-heated air,

then uses the built-in blower to fan the flames.

WARNING! Do not allow familiarity with products to make you

careless. Remember that a careless fraction of a second is suﬃcient to

inflict serious injury.

Starting and Stopping

1. Insert the battery in the battery compartment. Push to make sure

it is locked in place (Fig. 2).

Fig. 2

Battery pack

Battery

compartment

2. Set up a pile of fuel such as charcoal, wood chips or wood pellets.

Make sure the mode switch is pushed forward and the Fire Starter

is set in burn mode, touch the fuel with the tip of the Battery-

powered Fire Starter nozzle and slide the power switch forward

(Fig. 3).

Fig. 3

3. Keep the Battery-powered Fire Starter aimed towards the same

spot. There should be a glowing spot in about 15 to 30 seconds.

This safe and eco-friendly Fire Starter can light charcoal, paper,

and wood in 60 seconds (depending on the fuel type) without using

any dangerous chemicals.

4. When the fuel starts to burn, slide the mode switch back to the

blower-only mode, and pull the Fire Starter a few inches back.

Giving it space will help the heated air to spread out (Fig. 4).

NOTE: Get the grill ready to cook faster by continuing on blower-

only mode until the grill reaches the desired temperature.

About 7.5 cm (3˝)

Fig. 4

5. When the grill is ready, release the mode switch to turn oﬀ the

Fire Starter. Remove the battery. Rest the Fire Starter on its

stand to let it cool down completely.

NOTE: When the Fire Starter is shut down the fan will continue to

work for a couple of seconds to cool down the Fire Starter.

Mode Switch (Fig. 5)

The Fire Starter is equipped with 2 working modes:

• Burn mode—activates heat and fan to ignite fuel.

• Blow mode—used for boosting flames.

Adjust the unit's mode with the mode switch. Slide it forward to set the

Fire Starter to burn mode. Slide it backward to set the Fire Starter to

blow mode.

Operating Tips

DANGER! Do not operate near explosive or flammable materials

unless extraordinary safety precautions are observed. The Fire

Starter produces air at extremely high temperatures and if exposed

to explosive or flammable materials, will result in flame or possible

explosion, causing serious personal injury, death or property damage.

1. Always make sure flammable objects are kept at a safe distance.

2. Never use near gas, petroleum products, or other explosive

substances.

3. Do not use near combustible materials such as dry grass, leaves,

and paper, which can scorch and catch ﬁre.

DANGER! Use extreme caution when starting a ﬁre. Some

charcoal contains impurities that cause sparks and popping. Sparks

could cause minor or moderate injury or property damage.

4. Never bury tip under charcoal or wood.

5. Never leave the unit in the ﬁre.

6. Sparks can be generated and fly towards you and others.

7. Sparks and ash can be blown out of designated burning area.

IGNITING LIKE A PRO

WARNING! Always have the product switched oﬀ, remove the

battery and wait until the Fire Starter is completely cooled down

before performing inspection, maintenance, and cleaning work.

WARNING! When servicing, use only identical replacement

parts. Use of any other parts could create a hazard or cause product

damage.

General Cleaning Tips

Use a soft, dry brush to clean the air inlet area. Use only mild soap

and a damp cloth to clean the housing. Do not use household

cleaners, since many contain chemicals, which could seriously

damage the plastic housing of the Fire Starter.

Do not use gasoline, turpentine, lacquer thinner, paint thinner, dry

cleaning fluids or similar products on the Fire Starter.

WARNING! Never allow any liquid to get inside the Fire Starter

or immerse any part of the Fire Starter into a liquid. Ensure the air

inlet and the housing are clean and free of obstructions.

WARNING! Do not at any time let brake fluids, gasoline,

petroleum-based products, penetrating oils, etc., come in contact

with plastic parts. Chemicals can damage, weaken or destroy plastic

which may result in serious personal injury.

STORAGE

WARNING! Let the Fire Starter cool to room temperature

before placing it in storage.

• Switch oﬀ the unit, remove the battery. Wait until it is

completely cooled down. Thoroughly clean the housing.

• Store the Fire Starter with the battery and charger indoors in

a safe location out of the reach of children. Keep away from

corrosive agents, such as garden chemicals and de-icing salt.

DISPOSAL

Recycling the tool

• Do not dispose of electrical Fire Starters as unsorted municipal

waste. Use separate collection facilities.

• Contact your local government agency for information

regarding the collection systems available.

• If electrical Fire Starters are disposed of in landﬁlls or dumps,

hazardous substances can leak into the groundwater and get

into the food chain, damaging your health and well-being.

Recycling + Disposal

The product comes in a package that protects it against damage

during shipping. Keep the package until you are sure that all parts

have been delivered and the product is functioning properly. Recycle

the package afterwards or keep it for long-term storage.

WEEE symbol. Waste electrical products should not be

disposed of with household waste. Please recycle where

facilities exist. Check with your local authority or local

store for recycling regulations.

Battery Caution + Disposal

Always dispose of your battery pack according to national,

provincial, and local regulations. Contact a recycling agency in your

area for recycling locations.

CAUTION! Even discharged battery packs contain

some energy. Before disposing, use electrical tape to cover

the terminals to prevent the battery pack from shorting, which

could cause a ﬁre or explosion.

WARNING! To reduce the risk of injury or explosion,

never burn or incinerate a battery pack even if it is damaged,

dead or completely discharged. When burned, toxic fumes and

materials are emitted into the surrounding atmosphere.

1. Batteries vary according to device. Consult your manual for

speciﬁc information.

2. Install only PWR POD batteries in your product (where

applicable).

3. Do not mix old and new batteries.

4. Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable

(Nickel Cadmium, Nickel Metal Hydride, or Lithium-Ion)

batteries.

5. Do not dispose of batteries in ﬁre.

6. Batteries should be recycled or disposed of as per provincial

and local guidelines.

www.vermontcastingsbbq.com

MAINTENANCE

TAKING CARE OF YOUR

FIRE STARTER

Table of Contents

CUSTOMER SUPPORT

SERVICE

LOCATE YOUR SERIAL NUMBER

Fill out your details below.

MODEL:

DATE OF PURCHASE:

SERIAL NUMBER:

Call the Vermont Castings

Customer Care Hotline

1-844-586-4660 HOURS: 8:00 a.m. to 4:30

p.m. (CST) Monday - Friday

Closed Saturday and Sunday.

HOW TO CONNECT WITH US

BEFORE YOU CALL FOR SERVICE have the following information available:

Serial number: The serial number can be found on the rating label located on the bottom of the Fire Starter.

Model number: The model number is located on the front cover of the user manual, and also on your cash register receipt.

Proof of purchase by the original owner.

IF YOUR PRODUCT IS DAMAGED

Call the Vermont Castings Customer Care Hotline

1-844-586-4660 HOURS: 8:00 a.m. to 4:30 p.m. (CST)

Monday - Friday

Closed Saturday and Sunday

Do not return to the store for replacement of damaged or defective parts. Vermont Castings Customer Care will

ensure that all in-stock replacement parts arrive at your home within 3 – 10 business days.

Concealed Damage: If damage is unnoticed until merchandise is unpacked, resolve issue by contacting Vermont Castings

Customer Care immediately. Missing or damaged parts should be claimed within 30 days of purchase.

www.vermontcastingsbbq.com

CUSTOMER SUPPORT

WARRANTY

THE MANUFACTURER:

Hereby warrants this product only to the ORIGINAL PURCHASERS

of this product:

If a gift, warranted only to the person for whom it was

purchased as a gift or promotional item.

Warranty is extended only to the original purchaser and

is not transferable to subsequent owners, except when

a gift or promo item.

Warrants that the product is free from defects in material and

workmanship for the durations indicated below when operating in

accordance with the accompanying Owner’s Manual.

NORMAL WEAR & TEAR EXCLUDED

Wear & tear = cosmetic and other immaterial deterioration that may

come with ownership of your Fire Starter over time, such as surface

rust, dents/scratches, etc.

Material defect = rust through or burn through of certain parts, or

other damage or failure inhibiting your ability to safely/properly use

your Fire Starter.

The manufacturer does not authorize any person or company to

assume for it any other obligation or liability in connection with

the sale, installation, use, removal, return, or replacement of

its equipment; and no such representations are binding on the

manufacturer.

This limited warranty will not reimburse you for the cost of any

inconvenience, food, personal injury or property damage.

Shipping and handling charges are the responsibility of the original

consumer-purchaser for all in/out of warranty part orders.

The manufacturer shall not be liable for incidental, consequential,

special or contingent damages resulting from its breach of this

written warranty or any implied warranty.

Vermont Castings agrees to repair or replace the part that is

defective in material or workmanship subject to the limitations and

exclusions listed below:

OWNER’S RESPONSIBILITIES / EXCLUSIONS OF WARRANTY

Retain original sales receipt and/or invoice.

Registering Fire Starter, though not required, conﬁrms

your warranty coverage, expedites any warranty

claims, and provides a direct link between you and your

Vermont Castings Fire Starter.

Warranty only applies if the owner takes reasonable care of the

Vermont Castings product by following all assembly instructions,

usage instructions, and preventative maintenance as outlined in the

accompanying owner’s manual.

Unless owner can prove that the defect or failure

is independent of non-compliance with the above

mentioned obligations.

The warranty lapses if there are damages, deteriorations,

discolourations, and/or rust for which Vermont Castings is not

responsible, caused by:

Abuse, misuse, alteration, modiﬁcation, misapplication, vandalism,

neglect, improper assembly or installation, and clearance to

combustible materials.

Failure to properly perform regular maintenance, safety checks and

service.

2 YEARS

1-844-586-4660

WWW.VERMONTCASTINGSBBQ.COM

@VERMONTCASTINGSBBQ

ALLUME-FEU ALIMENTÉ PAR

BATTERIE

GUIDE D’UTILISATION

VOTRE OPINION EST IMPORTANTE

LAISSEZ-NOUS UN COMMENTAIRE SUR

WWW.CANADIANTIRE.CA

0850200

BIENVENUE CHEZ VERMONT CASTINGS

Il y aura toujours ceux qui vont avec la foule, qui font ce que tout le monde fait.

Même si ce n'est pas ce qu'ils sont ou ce qu'ils veulent être. Cela n’a jamais

été notre cas. Chez Vermont Castings, nous croyons à l’importance d’être

soi-même, en faisant ce que nous pensons être juste en tout temps. Que

vous devez être sans reproche et sans compromis pour faire de votre mieux.

Nous n’avons pas peur de suivre notre propre chemin. Pour nous, ce chemin

a commencé par le feu, et a été éclairé avec un but. Nous croyons que le feu

enflamme quelque chose en nous qui nous rend humains. Nous savons tous

qu’il y a une plus grande joie dans les histoires partagées autour du feu. Plus

de confort avec la chaleur fournie par le feu. Et de meilleures saveurs dans les

aliments préparés sur le feu. Aujourd’hui, ce feu brûle encore en nous.

Ce feu conduit l’excellence dans ce que nous faisons, il nous donne une vision

et fournit une croyance inébranlable. Nous croyons que les gens sont attirés

par ceux qui suivent leurs convictions.

Nous existons pour créer et établir des liens autour de la nourriture et de la

flamme.

CONTACTEZ-NOUS AU 1 844 586-4660

WWW.VERMONTCASTINGSBBQ.COM

Les fondateurs Duncan Syme et Murray Howell avaient l’idée qu’ils pourraient aider

leurs voisins à garder leurs maisons au chaud face à la hausse des coûts de l’énergie.

1975

@vermontcastingsbbq

www.vermontcastingsbbq.com

TABLE DES MATIÈRES

PREMIERS PAS

La tranquillité d’esprit est inestimable. Assurez-vous

de connaître et de comprendre les bases d’une

utilisation sécuritaire.

BESOIN DE CONNAÎTRE LA SÉCURITÉ 5

MISE EN PLACE 6

ALLUMER COMME UN PRO

SE FAMILIARISER AVEC VOTRE ALLUME-FEU 10

DÉBALLAGE 11

FONCTIONNEMENT 13

PRENDRE SOIN DE VOTRE

ALLUME-FEU

ENTRETIEN 15

RANGEMENT 15

ÉLIMINATION 15

SERVICE À LA CLIENTÈLE

À votre service quand vous en avez besoin. Cette

information cruciale peut avoir la réponse que vous

recherchez.

SERVICES 16

GARANTIE 17

Table of Contents

CONTACTEZ-NOUS au 1 844 586-4660

LE SYSTÈME

LISEZ ATTENTIVEMENT LE GUIDE D’UTILISATION ET LES CONSIGNES DE SÉCURITÉ

AVANT D’UTILISER CET ALLUME-FEU ALIMENTÉ PAR BATTERIE. COMPAREZ

L’ILLUSTRATION CI-DESSOUS À L'ALLUME-FEU ALIMENTÉ PAR BATTERIE AFIN DE

VOUS FAMILIARISER AVEC L’EMPLACEMENT DES DIFFÉRENTES COMMANDES ET

DES DIFFÉRENTS RÉGLAGES. CONSERVEZ CE GUIDE AUX FINS DE CONSULTATION

ULTÉRIEURE.

1. BOUCLIER THERMIQUE

2. COMMUTATEUR DE MODE

3. POIGNÉE

4. COMPARTIMENT À BATTERIE

5. PORTE-BOUTEILLE / OUVRE-

BOUTEILLE

1 2 3 4

La page charge ...

Vermont Castings PWR POD Charcoal Igniter Le manuel du propriétaire

Marque: Vermont Castings

Modèle: PWR POD Charcoal Igniter

Catégorie: Outils électroportatifs

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Vermont Castings PWR POD Charcoal Igniter Owner's manual

Vermont Castings PWR POD Charcoal Igniter Le manuel du propriétaire

Vermont Castings PWR POD Charcoal Igniter Le manuel du propriétaire

dans d''autres langues

Autres documents