Breville Smart Scoop Ice Cream Machine BCI600XL Mode d'emploi

Marque: Breville

Modèle: Smart Scoop Ice Cream Machine BCI600XL

Catégorie: Fabricants de crème glacée

Taper: Mode d'emploi

the Smart Scoop™ Ice Cream Machine

Instruction Booklet - Livret d’instructions

BCI600XL

BCI600XL_IB_E12_FA.indd 2 7/02/12 2:58 PM

CONGRATULATIONS

on the purchase of your new

Breville Smart Scoop™ Ice Cream Machine

NOTE

Do not store the ice cream machine on any other

side other than upright and level on its support

feet. This is important for the compressor.

BCI600XL_IB_E12_FA.indd 2 7/02/12 2:58 PM

CONTENTS

4 Breville Recommends Safety First

6 Know your Breville Smart Scoop™

Ice Cream Machine

10 Operating your Breville

Smart Scoop™ Ice Cream Machine

18 Tips for Better Ice Cream Making

21 The Vital Ingredients

23 Care & Cleaning

27 Troubleshooting

30 Recipes

42 French

BCI600XL_IB_E12_FA.indd 3 7/02/12 2:58 PM

BREVILLE RECOMMENDS SAFETY FIRST

When using electrical appliances, basic

safety precautions should always be

followed, including the following:

• Carefully read all instructions before

operation and save for future reference.

• Remove and safely discard any

packaging material and promotional

labels before using the Breville Smart

ScoopTM for the ﬁrst time.

• To eliminate a choking hazard for young

children, remove and safely discard the

protective cover ﬁtted to the power plug

of this appliance.

• Do not place the ice cream machine

near the edge of the counter top or

table during operation. Ensure the

surface is level, clean and free of liquid

or other substances. Vibration during

the churning process may cause the

machine to move slightly.

• Do not place this appliance on or near

a hot gas or electric burner, or where it

could touch a heated oven. Position the

appliance at a minimum distance of

6 inches away from walls. To ensure

proper ventilation.

• Always operate the ice cream machine

on a stable surface.

• Do not operate the ice cream machine

on a sink drain board.

• Always ensure the ice cream machine is

properly assembled before connecting to

a power outlet and operating. Follow the

instructions provided in this book.

• The ice cream machine is not intended

to be operated by means of an external

timer or separate remote control system.

• Do not cover the air vents when the ice

cream machine is in use.

• Do not place any ingredients directly

into the ice cream chamber. Place

ingredients into the ice cream bowl only.

• Ensure ice cream chamber is clean, dry,

and free of debris before each use.

• Do not place ﬁngers or hands inside the

ice cream machine during operation.

Avoid contact with moving parts.

• Ensure the ice cream machine is turned

off and then unplugged from the power

outlet when not in use and before

cleaning.

• Do not leave the lid off the ice cream

machine for extended periods of time.

• Keep the inside and outside of the

appliance clean. Follow the cleaning

instructions provided in this book.

• Do not use any other accessories other

than those provided with the Breville

Smart ScoopTM

IMPORTANT SAFEGUARDS FOR

ALL ELECTRICAL APPLIANCES

• Unwind the power cord fully before use.

• To protect against electrical shock, do

not immerse power cord, power plug or

appliance in water or any other liquid.

• Do not let the power cord hang over the

edge of the counter top or table, touch

hot surfaces or become knotted.

At Breville we are very safety conscious. We design and manufacture consumer products with

the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise

a degree of care when using any electrical appliance and adhere to the following precautions.

IMPORTANT SAFEGUARDS

BCI600XL_IB_E12_FA.indd 4 7/02/12 2:58 PM

BREVILLE RECOMMENDS SAFETY FIRST

• The appliance is not intended for use

by persons (including children) with

reduced physical, sensory or mental

capabilities, or lack of experience and

knowledge, unless they have been given

supervision or instruction concerning

the use of the appliance by a person

responsible for their safety.

• Children should be supervised to ensure

that they do not play with the appliance.

• It is recommended to regularly

inspect the appliance. Do not use the

appliance if the power cord, power

plug or appliance becomes damaged in

anyway. Return the entire appliance to

the nearest authorized Breville Service

Center for examination and/or repair.

• Any maintenance, other than cleaning,

should be performed at an authorized

Breville Service Center.

• This appliance is for household use only.

Do not use this appliance for anything

other than its intended use. Do not use

in moving vehicles or boats. Do not use

outdoors. Misuse may cause injuries.

• This appliance is equipped with a

power cord having a grounding wire

with a grounding plug. The appliance

must be grounded using a 3-hole

properly grounded outlet. In the event

of an electrical short circuit, grounding

reduces the risk of electrical shock.

• If the power outlet is a standard

2-prong wall outlet, it is your personal

responsibility and obligation to have

it replaced with a properly grounded

3-prong wall outlet.

• Do not, under any circumstances, cut or

remove the third (ground) prong from

the power cord or use an adapter.

BREVILLE ASSIST™ PLUG

Your Breville appliance comes with a unique

Assist™ Plug, conveniently designed with

a ﬁnger hole in the power plug for easy

and safe removal from the wall outlet. For

safety reasons it is recommended you

plug your Breville appliance directly into

its own electrical outlet on a dedicated

circuit separate from other appliances. If

the electric circuit is overloaded with other

appliances, your appliance may not function

properly. Use in conjunction with a power

strip or extension cord is not recommended.

SHORT CORD INSTRUCTIONS

Your Breville appliance is ﬁtted with a short

power supply cord as a safety precaution to

prevent personal injury or property damage

resulting from pulling, tripping or becoming

entangled with a longer cord. Do not allow

children to use or be near this appliance

without close adult supervision. Longer

detachable power supply cords or extension

cords are not recommended but may be

used if care is exercised. If an extension cord

is used, (1) the marked electrical rating of

the cord set or extension cord should be at

least as great as the electrical rating of the

appliance, (2) the cord should be arranged

so that it will not drape over the countertop

or tabletop where it can be pulled on by

children or tripped over unintentionally

and (3) the extension cord must include a

3-prong grounding plug.

FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

BCI600XL_IB_E12_FA.indd 5 7/02/12 2:58 PM

KNOW

your Breville Smart Scoop™ Ice Cream Machine

BCI600XL_IB_E12_FA.indd 6 7/02/12 2:58 PM

FEATURES OF YOUR BREVILLE SMART SCOOP ™ ICE CREAM MACHINE

Automatic Mode

Automatic mode churns and freezes

the ingredients to the selected/desired

consistency. Select one of the four different

settings: Sorbet, frozen yogurt, gelato or ice

cream. Machine will beep once when ready,

or selected music will play.

Manual Mode

The time to make ice cream can be manually

set for pre timed recipes.

Settings

The Breville Smart ScoopTM has four different

settings to choose from. Select one of the

following settings; sorbet, frozen yogurt,

gelato, or ice cream.

Pre-Cool

This function can be selected before either

manual or automatic mode is selected. It’s

a great way to pre-cool the machine. This

optional function will cool the machine to

approximately 14°F~ -22°F or -10°C~ -30°C

and usually takes about 5-10 minutes.

Keep Cool

Once the consistency of the dessert has

been achieved, using this function you

are able to keep dessert at a constant

temperature for up to 3 hours. When the

machine is in this function please note

that the compressor and motor will turn on

incrementally to test the consistency of the

dessert.

This function will automatically default to

on and LCD around button will illuminate

red when the Breville Smart ScoopTM is

powered on.

NOTE

During the KEEP COOL function

the paddle will only turn if needed to

maintain the selected consistency.

Child Lock

The Breville Smart ScoopTM features a child

lock. Press and hold the HOLD for

2 seconds to set the child lock mode. To

exit this mode press HOLD button for 2

seconds again.

Add Mix Ins

Mix ins such as chocolate chips, fresh fruit

and ﬂavors can all be added easily through

the ﬂip back lid. The ice cream machine will

beep and ADD MIX INS will ﬂash to let

you know that it is time to add your favorite

condiments!

Sound

The ice cream machine features sound such

as an alert beep or music when the dessert

is ready. This alert can be a beep, mute, or

music tune.

• Turkey in the Straw

• The Entertainer

• Camptown Races

BCI600XL_IB_E12_FA.indd 7 7/02/12 2:58 PM

KNOW YOUR BREVILLE SMART SCOOP ™ ICE CREAM MACHINE

A. Anodised ice cream bowl with handle

for easy removal. This 1.5 Quart bowl is

not dishwasher safe.

B. Paddle* used to scrape the sides of the

bowl and churn the ice cream.

Note: not to be stored in the freezer.

C. Lid* has a lift easy pull ring so half can

be opened to add mix-ins, chocolate

chips etc.

D. Stainless steel housing

E. POWER button will turn the ice cream

machine on or off.

F. START | PAUSE this will start the

machine compressor and churning.

G. Manual timer use to select time, from

5 minutes to 180 minutes.

H. Pre-cool function will pre-cool the

machine to approximately

14°F ~ -22°F to -10°C~ -30°C.

I. Keep cool will keep dessert chilled and

churned for up to 3 hours.

J. Auto timer/Hardness selection dial will

scroll between the following settings:

sorbet, frozen yogurt, gelato, or ice

cream. Rotate the dial left for softer

textured desserts or right for harder

textured desserts.

K. TEMP button allows you to toggle

between Fahrenheit and Celsius.

L. Sound select between high, low,

musical tune or mute.

M. Handles for easy lifting.

N. Bowl chamber

A B C G H I

E J

* Dishwasher safe parts (top shelf only).

BCI600XL_IB_E12_FA.indd 8 7/02/12 2:58 PM

KNOW YOUR BREVILLE SMART SCOOP ™ ICE CREAM MACHINE

SMART SCOOP DISPLAY

O. LCD Control Display provides

information on function setting and

cooling progress.

P. Hardness selection bar

Q. Progress indicator bar

R. Keep Cool will keep the frozen dessert

chilled and churned for up to 3 hours.

S. Add mix-ins will ﬂash to let you know

when it is time to add your favorite

mix-ins.

T. Pre-cooling indicates that the

compressor is on and cooling the

machine.

U. Press Start ﬂashes when in the

PRE-COOL mode to advise that the

machine is chilled and ready to start

churning.

V. Remove blade indicates that the dessert

is ﬁnished and the blade can be removed

from the bowl.

ACCESSORIES

W. Anodised ice cream bowl

X. Spatula use to scrape the bowl

Y. Paddle

Z. Bottle brush for easy cleaning of

the paddle and bowl

T PQ

BCI600XL_IB_E12_FA.indd 9 7/02/12 2:58 PM

OPERATING

your Breville Smart Scoop™ Ice Cream Machine –

Beginners Guide

BCI600XL_IB_E12_FA.indd 10 7/02/12 2:58 PM

OPERATING YOUR BREVILLE SMART SCOOP ™ ICE CREAM MACHINE

WARNING

The ice cream machine contains a

compressor that MUST remain upright

at all times. Do not store machine on

any other surface apart from its feet.

BEFORE FIRST USE

Machine preparation

Remove and discard all labeling and

packaging materials attached to your ice

cream machine. Ensure you have removed

all parts and accessories before discarding

the packaging.

Remove the lid, ice cream bowl and paddle

from the machine. Clean these parts and

accessories using warm soapy water and

rinse thoroughly. Ensure all parts are

completely dry before using the machine.

NOTE

Always place the paddle inside the

bowl before adding ingredients. This

ensures that the ingredients will not

spill into the ice cream chamber.

WARNING

To prevent damage to the compressor

and to ensure maximum performance,

place unit in upright position for 12

hours after transit.

FIRST USE

Initial start up

• Place ingredients inside the bowl in

order of the recipe.

• Place ice cream bowl and paddle inside

the bowl chamber.

NOTE

There are 2 grooves in the bowl

chamber. Place the bowl so the handle

hinges sit within these grooves.

NOTE

Make sure the BOWL CHAMBER and

the exterior of the ice cream bowl are

completely dry before inserting the

ice cream bowl.

BCI600XL_IB_E12_FA.indd 11 7/02/12 2:58 PM

OPERATING YOUR BREVILLE SMART SCOOP ™ ICE CREAM MACHINE

• Lock lid into position by placing the

handle at the align arrow on the machine

at the 2 o’clock position and turning the

handle clockwise to the 3 o’clock position

and aligned to the lock graphic.

Note: The pull ring for lid should be at

the 6 o’clock position.

• Press the POWER button to turn the

machine on.

• Choose MANUAL mode or AUTO mode

by either using the hardness dial for

AUTO mode or the arrow buttons

for MANUAL mode.

• For AUTO mode turn hardness dial to

the desired frozen dessert setting

(e.g. frozen yogurt).

Press the START | PAUSE button to

begin the churning process.

• For MANUAL mode press the arrow

up or button to select MANUAL

mode.

• Using the same arrow buttons now

press up or down to select the time that

you require the machine to chill and

churn. The time is displayed on the LCD

display and will move in ﬁve (5) minute

increments up to 180 minutes.

• Press START | PAUSE button to begin

the process.

NOTE

It is important that the paddle is

properly assembled onto the drive

shaft to ensure ingredients are mixed.

PRE-COOL FUNCTION

NOTE

PRE-COOL can only be operated in

the stand by mode and is not available

after the START | PAUSE button is

pressed.

The PRE-COOL function can be selected

in either the AUTO or MANUAL mode.

This function will cool the machine to

approximately

14°F ~ -22°F/ -10°C ~ -30°C in 5-10 minutes.

If selected the surrounding button will

illuminate from white to red and ‘PRE-

COOLING’ will ﬂash on the LCD screen.

Once the machine has reached optimum

temperature from pre-cooling the LCD

will illuminate READY and PRESS START

will ﬂash on the LCD. The paddle will start

turning after 15 minutes has passed, but will

not start making the frozen dessert unless

the START|PAUSE button is pressed.

In this function the LCD screen will display

the temperature, ‘PRE-COOLING’ will ﬂash,

to let you know that you are in this mode.

NOTE

The machine will NOT automatically

start churning. The START | PAUSE

button will have to be pressed to start

the churning process.

PRE-COOL will return to standby after

20 minutes or alternatively can be turned

off either by pressing PRE-COOL button

again or pressing the START | PAUSE

button which will override the PRE-COOL

mode.

AUTOMATIC MODE

BCI600XL_IB_E12_FA.indd 12 7/02/12 2:58 PM

OPERATING YOUR BREVILLE SMART SCOOP ™ ICE CREAM MACHINE

AUTOMATIC MODE

Start up

Unwind the power cord completely and

insert the power plug into a 110/120V

outlet.

Press the POWER button to turn the

machine on. The POWER button will

illuminate white. The LCD screen will

display the AUTO mode and the progress

and hardness selection bar. The arrow

should be pointed at the AUTO on the LCD

screen. To ensure the machine is in AUTO

mode turn the hardness dial to the right or

left.

HARDNESS SELECTION

To select the hardness you desire turn the

hardness dial left or right. Left being softer

frozen desserts such as sorbet and right

being harder desserts such as ice cream.

KEEP COOL IN AUTOMATIC MODE

The keep cool function will keep the frozen

dessert chilled and churned for up to 3

hours in total. A red light will illuminate

around the button and the LCD screen will

display KEEP COOL automatically as soon

as the machine is turned on. This function

works by churning the mixture to the

right hardness selected and once reached

the compressor will pulse on and off in

conjunction with the paddle.

Paddle will only turn if needed to maintain

the selected consistency.

NOTE

When the machine is in this mode

the compressor and motor will

turn on incrementally to check the

consistency of the dessert.

Progress indicator highlighted

Hardness indicator highlighted

ADDING THE INGREDIENTS AND

STARTING OPERATIONS

TIP

When using the ice cream machine

always insert the paddle before adding

ingredients into the bowl. Always

add ingredients into the bowl before

inserting into the clean and dry bowl

chamber.

AUTOMATIC MODE

BCI600XL_IB_E12_FA.indd 13 7/02/12 2:58 PM

OPERATING YOUR BREVILLE SMART SCOOP ™ ICE CREAM MACHINE

a) Ensure that the paddle and bowl, and

bowl chamber are clean.

b) Add ingredients to the ice cream bowl as

speciﬁed in the recipes. Wipe any spilled

ingredients from the rim of the bowl.

c) Insert the bowl into the bowl chamber

by pressing down ﬁrmly on the rim of

the bowl until it is securely in position.,

ensuring bowl handle hinges sit inside

grooves on the chamber. It is important

that the ice cream bowl is properly

assembled onto the drive shaft to ensure

that the paddle operates correctly.

d) Align the hole in the bottom of the

paddle with the drive shaft in the bowl.

Push down ﬁrmly and secure into place.

e) It is important that the paddle is properly

assembled onto the drive shaft to ensure

that ingredients are churned properly.

f) Place the lid onto the ice cream bowl.

It is not recommended to open the lid

during operation unless stated in the

recipe or if mix ins are required.

g) To change the temperature reading from

C to F press the button.

h) Press volume button to select from high,

low, music or mute.

i) To start making the dessert press

START | PAUSE. Once you press

START | PAUSE all of the indicators

on the selection bar will disappear and

ONLY the selected dessert/consistency

indicator will remain. As the dessert

starts to freeze the indicators on the

selection bar will display and scroll up

the selection bar to the chosen dessert.

This may take up to 60 minutes before

indicators illuminate. The ice cream

machine should now start cooling and

churning to the desired setting. The

LCD screen will toggle between the

elapsed churning time and the current

temperature that the machine is chilling,

'KEEP COOL' and 'COOLING' will

illuminate. An indicator will sit above

the selected hardness setting.

NOTE

If the START | PAUSE button is

pressed during the cycle this will

pause the time. To resume the

process press the button again. If

you need to reset the timer press

and hold the START | PAUSE button

for 2 seconds and this will reset the

selection.

j) When the desired setting has been

reached the compressor and motor

will stop. READY will illuminate and

REMOVE BLADE will ﬂash on the LCD

display. The chosen indicator will sound

to alert the user that the dessert is ready.

NOTE

The READY will illuminate and

REMOVE BLADE will ﬂash for 10

minutes only, and then turn off. It can

also be turned off ahead off this time

by pressing any button or dial.

NOTE

It could take up to 60 minutes for

the indicators on the selection bar to

start moving up on the LCD display.

AUTOMATIC MODE

BCI600XL_IB_E12_FA.indd 14 7/02/12 2:58 PM

OPERATING YOUR BREVILLE SMART SCOOP ™ ICE CREAM MACHINE

MANUAL MODE

Start up

Unwind the power cord completely and

insert the power plug into a 110/120V

outlet.

Press the POWER button to turn the

machine on. An alert will sound and the

POWER button will illuminate white. The

LCD screen will display the AUTO mode

and selection bar. The ice cream machine

and LCD screen will always revert to the last

program or setting that was used.

Ensure the machine is in MANUAL mode by

pressing the MANUAL timer arrow

buttons. The time will be displayed and the

arrow should point to the MANUAL on the

left hand side of the screen.

To change the time that you wish to churn

and chill, press either one of the MANUAL

timer arrow keys. On average, ice cream will

need about 50 minutes to churn and chill.

This is just an estimate please refer to your

recipes for churning times.

HARDNESS SELECTION

This is not available in the manual mode.

ADDING THE INGREDIENTS AND

STARTING OPERATIONS

Once the previous functions have been

selected the ingredients can now be added.

a) Ensure that the paddle and bowl, and

bowl chamber are clean.

b) Insert the bowl into the dry, clean bowl

chamber by pressing down ﬁrmly on

the rim of the bowl until it is securely

in position. Ensure bowl handle hinges

sit inside grooves on the chamber. It

is important that the ice cream bowl

is properly assembled onto the drive

shaft to ensure that the paddle operates

correctly.

c) Align the hole in the bottom of the

paddle with the drive shaft in the bowl.

Push down ﬁrmly and secure into place.

d) It is important that the paddle is properly

assembled onto the drive shaft to ensure

that ingredients are churned properly.

ADDING THE INGREDIENTS

a) Add ingredients to the ice cream bowl as

speciﬁed in the recipes before inserting

bowl into the ice cream chamber. Wipe

any spilled ingredients from the rim of

the bowl.

b) Place the lid onto the ice cream bowl.

It is not recommended to open the lid

during operation unless stated in the

recipe of if mix-ins are required.

c) Ensure that the machine is in

MANUAL mode.

d) Set the time that you desire by pressing

the MANUAL buttons up or down .

e) Press START | PAUSE button for the

ice cream making process to start. The

light around this button will illuminate

red to indicate that the button has been

selected and the machine has now

started the churning process.

f) When the desired time has been reached

the compressor and motor will stop.

READY will illuminate and REMOVE

BLADE will ﬂash on the LCD display.

The selected tone will sound to alert the

user that the dessert is ready.

NOTE

The READY will illuminate and

REMOVE BLADE will ﬂash for 10

minutes only, and then turn off. It can

also be turned off ahead off this time by

pressing any button or dial. 10 minutes

after the timer has elapsed, the screen

will revert back to original screen before

‘START | PAUSE’ was pressed.

MANUAL MODE

BCI600XL_IB_E12_FA.indd 15 7/02/12 2:58 PM

OPERATING YOUR BREVILLE SMART SCOOP ™ ICE CREAM MACHINE

NOTE

If the START | PAUSE button is

pressed during the cycle this will

pause the time. To resume the process

press the button again.

If you need to reset the timer press

and hold the START | PAUSE button

for 2 seconds and this will reset the

time.

g) The timer adjust can be done at

any time.

KEEP COOL IN MANUAL MODE

The KEEP COOL function will keep the

frozen dessert chilled and churned for the

selected duration of machine operation. A

red light will illuminate around the button

and the LCD screen will display KEEP

COOL when this feature is selected. This

function works by churning the mixture

to the time selected and once reached

the compressor will pulse on and off in

conjunction with the paddle.

Paddle will only turn if needed to maintain

the selected consistency.

NOTE

When the machine is in this mode

the compressor and motor will turn

on if needed to maintain the selected

consistency.

VOLUME FUNCTION

The Breville Smart Scoop™ features a

Volume/Tone selection which includes

music or a beep to indicate your frozen

dessert is ready. The volume will default to

high which can be adjusted to low or mute.

Your music selection includes:

• Turkey in the Straw

• The Entertainer

• Camptown Races

FACTORY DEFAULT SETTING

Press and hold the KEEP COOL button for 5

seconds. This will restore the machine back

to the original factory settings. This can

only be done in the stand by mode.

MANUAL MODE

BCI600XL_IB_E12_FA.indd 16 7/02/12 2:58 PM

NOTES

BCI600XL_IB_E12_FA.indd 17 7/02/12 2:58 PM

TIPS FOR BETTER ICE

CREAM MAKING

for your Breville Smart Scoop™ Ice Cream Machine

BCI600XL_IB_E12_FA.indd 18 7/02/12 2:58 PM

TIPS FOR BETTER ICE CREAM MAKING

TIPS FOR BETTER

ICE CREAM MAKING

• Note: time taken to make frozen desserts

can vary depending on the ambient

room temperature, temperature of the

ingredients and pre cooling the machine.

Note: the cooler the ingredients the

faster the ice cream process. As a

general guideline it takes around

50 minutes to make ice cream.

• When making crème anglaise and

recipes that require heating ingredients

its always a good idea to make this the

day before or cool ingredients for at least

4 hours prior to making ice cream.

• Always insert the bowl and paddle

into the bowl chamber before adding

ingredients.

• Ice cream recipes stated in this

instruction booklet use ingredients such

as cream, milk, eggs and sugar, these

ingredients can be substituted with

similar ingredients to suit taste or dietary

requirements. Note taste and ﬂavors will

vary if using different ingredients.

• Due to aeration of ingredients do

not exceed 3½ cups of liquid

ingredients.

• Alcohol inhibits the freezing process. It’s

best to add alcohol towards the end of

the ice cream making process.

• The consistency of the frozen dessert

made is a spoonable mixture. Please note

that if you are serving in cones or on

plates that it’s best to place the ice cream

in the freezer for 2 hours prior to serving.

• When storing your frozen dessert in the

freezer, ensure that the container is air

tight and well sealed. This will prevent

ice crystals forming. Putting a plastic

ﬁlm directly over the top of the frozen

dessert will also help with this.

• Frozen desserts can be stored for up to

2 weeks.

• If serving a dessert from the freezer

its best to let the dessert sit at room

temperature for 5-10 minutes prior

to serving.

TIPS FOR MAKING CRÈME

ANGLAISE (CUSTARD BASE)

• Traditionally creamy textured ice

cream is made from a crème anglaise,

custard base. Below are tips on

achieving the prefect crème anglaise

time after time.

• Make sure all ingredients are fresh.

• Eggs are best at room temperature for

making a custard base.

• Ensure that you measure all your

ingredients ﬁrst and have them ready

for when you are starting to cook.

• Either use a wire whisk or electric hand

beater, beat eggs yolks and sugar until

they are light and creamy, and double

in size. For best results whip until the

mixture becomes pale yellow in color.

• Use a heavy bottom sauce pan when

cooking crème anglaise.

• When heating the milk you don’t want

to boil it. A good guide to know when to

remove the milk from the heat is when

little bubbles start to form around the

edge of the milk.

• It is best to now pour half of the heated

milk into the egg mixture while

whisking, then pour the mix back into

the original pot with the milk and

continue to stir with a wooden spoon

at the same time until the two are well

combined.

BCI600XL_IB_E12_FA.indd 19 7/02/12 2:58 PM

TIPS FOR BETTER ICE CREAM MAKING

• Ensure that the mixture is constantly

stirred with a wooden spoon until it

thickens and coats the back of the

spoon. To test using the back of the

spoon, coat the spoon in the crème

anglaise. Run your ﬁnger through the

mixture on the back of the spoon. If the

ﬁnger mark stays then the mixture is

thick enough.

• If the mixture separates or curdles then

heat is too high.

• Do not leave crème anglaise unattended

while cooking.

• Crème anglaise will take 5-15 minutes

to thicken depending on quantities etc.

• Always allow the mixture to cool to

room temperature before placing into

the fridge.

• To cool the mixture quickly it can be

put in a metal bowl and then into an ice

bath and stirred constantly until well

chilled.

BCI600XL_IB_E12_FA.indd 20 7/02/12 2:58 PM

La page charge ...

Breville Smart Scoop Ice Cream Machine BCI600XL Mode d'emploi

Marque: Breville

Modèle: Smart Scoop Ice Cream Machine BCI600XL

Catégorie: Fabricants de crème glacée

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Breville Smart Scoop Ice Cream Machine BCI600XL Operating instructions

Breville Smart Scoop Ice Cream Machine BCI600XL Mode d'emploi

Breville Smart Scoop Ice Cream Machine BCI600XL Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents