KREAFUNK 60862 aCOUSTIC Premium Bluetooth Speaker Manuel utilisateur

2

3

This product is in compliance with the essential requirements and other relevant

provisions of Directive 2014/53/EU.

The declaration of conformity may be consulted at:

www.kreafunk.com/declaration-of-conformity/

English 4

Deutsch 20

Español 36

Français 52

Dansk 68

Italiano 82

Chinese󰊸 98

4English

English

Operation manual

5

English

SAFETY AND MAINTENANCE INSTRUCTIONS

1. Please read this operation manual carefully before use.

2. The safety and maintenance instructions in this operation manual

should be retained for future reference and must be followed at all

times.

3. Keep the product away from heat sources such as radiators, heaters or

other appliances that produce heat.

4. Do not expose the product to direct sunlight for longer periods. High

temperatures will shorten the life of the product, destroy the battery and

distort certain plastic parts.

5. Do not expose the product to extreme cold as it may damage the

internal circuit board.

6. Avoid liquids getting into the product.

7. Do not throw with or stamp on the product. This may damage the

internal circuit board.

8. Do not try to disassemble the product. This must only be done by a

professional.

9. Do not use concentrated chemical products or detergent to clean the

product.

10. Keep the surface away from sharp things, as these may cause damage

to the plastic parts.

11. Use 5V / 1A power supplies only. The connection of power supplies with

higher voltage may lead to severe damage.

12. Donotarbitrarilydiscardorplacethelithiumbatterynearreorintense

heat in order to avoid a risk of explosion.

6English

If you do experience any problems with your product please contact the

retailer you purchased the product from. The retailer will provide you with

guidance and if that does not solve the problem the retailer will handle the

claim directly with KREAFUNK.

7

English

Reset

0:02

5W

USB-C 5V/1A

8English

CONNECT & PLAY

1

1x

Press the multifunction button (K) to turn aCOUSTIC on. The LED indicator

will light up white and a sound prompt is heard.

10 English

MANUAL BLUETOOTH® PAIRING MODE

0:02

aCOUSTIC will always re-connect to last connected device, when turned on.

If you wish to connect a new device, you can manually activate Bluetooth®

pairing mode:

Press and hold the multifunction button (K) to activate Bluetooth pairing

mode.TheLEDindicatorwillashwhiteandyoucannowpairaCOUSTIC

with a new device.

11

English

MULTI-FUNCTIONS

1x 2x 3x 0:02

12 English

1x

0:02

13

English

VOICE ASSISTANT FUNCTION

You can use your device’s Voice Assistant through the built-in microphone

on aCOUSTIC. Activate your Voice Assistant by triple-pressing the Play

button.TheLEDindicatorwillashwhiteandthebuilt-inmicrophonewill

pick up your voice commands.

When having two aCOUSTICs playing in TWS mode, only one aCOUSTIC can

activate the microphone for Voice Assistant. When activating your Voice

Assistant,theLEDindicatorwillashwhiteonthespeakerthatlistensto

your commands.

3x

14 English

BATTERY AND CHARGING

USB-C 5V/1A

Orange

0-99 %

Green

100 %

5W

15

English

CHARGING

Charging time is approximately 5 hours using the included USB cable. The

LED indicator turns solid orange when charging. The LED indicator turns

solid green when the battery is fully charged.

WIRELESS CHARGING

aCOUSTIC can be charged via the USB-C input or by being placed on a QI®

certiedwirelesschargingpad.WhenaCOUSTICischargingcorrectly,the

LED indicator will turn solid orange. When the battery is fully charged, the

LED indicator will turn solid green until aCOUSTIC is removed from the QI®

certiedchargingpadorthechargingcableisunplugged.

ChargingtimeonaQI®certiedchargingpadisapproximately8hours.

16 English

BATTERY STATUS

White

LED Battery Status

15-100 %

<15 %

<10 %

0-99 %

100 %

Red

Flashing Red

Orange

Green

When the battery level is below 15%, the LED indicator turns solid red. When

thebatterylevelisbelow10%,theLEDindicatorashesred.

aCOUSTICwillautomaticallyswitchowhennotinusefor60minutes.

17

English

TRUE WIRELESS STEREO PAIRING

1

L R

0:02 0:02

1x

123

aCOUSTIC can pair with another aCOUSTIC and play in True Wireless Stereo

(TWS).

Turn on both aCOUSTICs. Press and hold the multifunction button (K) on the

primary speaker for 2 seconds. Then press the (+) button to activate TWS

pairing mode. Press and hold the multifunction button on the secondary

speaker to connect in TWS. The LED indicator on the primary speaker now

ashespurple.

18 English

2

L R

The two aCOUSTICs will automatically pair, the LED indicator will turn solid

white on both speakers and a sound prompt will be heard.

19

English

Make sure your device is paired to the primary speaker. You are now ready

to play in True Wireless Stereo.

The two aCOUSTICs will automatically reconnect in TWS mode when both

speakers are turned on, until TWS pairing mode is manually activated again

on one of the speakers.

20 Deutsch

Deutsch

Bedienungshandbuch

La page est en cours de chargement...

KREAFUNK 60862 aCOUSTIC Premium Bluetooth Speaker Manuel utilisateur

KREAFUNK 60862 aCOUSTIC Premium Bluetooth Speaker Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents