VOCOlinc FL2201 Mode d'emploi

Taper
Mode d'emploi
80x120mm
FL2201
Floor Lamp
Product Overview:
Handsfree voice control and with over 16 million colors, the FL2201 Smart Floor Lamp is
here to make your home truly yours.Utilizing the latest in Wi-Fi technology, FL2201 Smart
Floor Lamp enable you to set the color temperature and intensity of any area via VOCOlinc
app. With countless uses and applications, an all-new colorful world awaits you with the
VOCOlinc FL2201.
You can customize your personal lighting from anywhere with an active internet connection.
It also supports for segment control and you can set it to a variety of effective mode in
different segments of it . With VOCOlinc APP, the light syncs to music and sound. Floor Lamp
changes color and flashing speed with rhythm and melody.
Floor LampWi-Fi Controller
on/off switch reset button
Features:
16 million colors
Works with Apple HomeKit
Works with Amazon Alexa
Works with the Google Assistant
Remote Access
Power / Reset Button:
Quick press to switch on/off
Press & hold for about 10 seconds to FACTORY RESET.
Note: All connection data will be cleared after reset. The FL2202 Floor Lamp must
be removed from the app and then add it back again.
What’s Included:
Floor Lamp
Smart Wi-Fi Controller
AC/DC Adapter
User Manual
*If you set the brightness to 0% before turning off the light switch, the smart light strip will
resume to 100% brightness as soon as you turn on the light switch again to indicate that it
is in good shape.
FL2201 Floor Lamp Status
Status
Turning on
the first time
FL2201
Searching Wi-Fi
Pairing
Device added successfully
Identifying the light strip
White light at 5% brightness
White light at 5% brightness
White light at 50% brightness
White light at 5% brightness blinks quickly 3 times
Firmware update completed Blinks twice
Specifications
Input: 100-240VAC, 50/60Hz
Output: 12V 1.5A ( SELV )
Plug type: US/EU
LED color range: 16 million colors with cool to warm whites
Wattage: 18W max
Operation frequency band(s): 2412~2472MHz
Max. transmitted RF power: 17dBm
Safety Warnings
WARNING: RISK OF ELECTRIC SHOCK OR BURNS. DO NOT install this product with wet
hands or standing on wet or damp surfaces
Not suitable for use with standard in-wall dimmers. Dimmable via the app only
Suitable for use in operating environment between 0°C and 40°C (32°F and 104°F)
The adapter, controller and Floor Lamp must be used in conjunction with full set of FL2202
Floor Lamp
Please do not mix with other model of products, otherwise there is a risk of product
damage
This device is not intended for use with emergency exit luminaires
NOT FOR EMERGENCY LIGHTING
DO NOT disassemble
DO NOT clean with liquid
System Requirements
Mobile device running the latest version of iOS and Android 4.3 or above
Existing Wi-Fi network
Stable Internet with good signal strength
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Any
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
The antenna(s) used for this transmitter must be installed to provide a separation distance
of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
Caution:
FCC Declaration
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
ithe following two conditions:
(1) This device may
not cause
interference,
and
(2) This
device
must accept any interference,
ncluding interference that may cause undesired operation of the device.
In order to avoid the possibility of exceeding the ISEDC radio frequency exposure limits,
human proximity to the antenna shall not be less than 20cm (8 inches) during normal
operation.
Cet appareil est conforme à la licence de RSSs d’industrie Canada. L’exploitation est
soumise à I les deux conditions suivantes:
(1) ce dispositif ne peut causer d’interférence et (2) ce dispositif doit accepter toute
interférence,Y compris les interférences qui peuvent causer un fonctionnement
indésirable de l’appareil.Afin d’éviter la possibilité de dépasser les limites d’exposition
aux radiofréquences de l’isedc,La proximité humaine de l’antenne ne doit pas être
inférieure à 20cm en temps normal opération
Assemble the Lamp pole
Caution:
IC Declaration
EU declaration of conformity
Hereby, Felion
Technologies Company Limited declares that the radio
equipment
ColorFlux
Light
Strip is in compliance with Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address: www.vocolinc.com
VOCOlinc APP
Setup code
Code de configuration
1
Attach the silicone strip light to the top end, then press the strip light from the
middle outwards to the two ends.
2
Insert the Cap into the Lamp Pole
3
4
Installation Steps
Assemble the 2 Bars into the Lamp Base. Use the Screws (already in the Holes) and
the spanner provided to tighten and secure the Bars to the Lamp Base.
5Connect the female header of the WI-FI controller to the male header on the
silicone strip light.
6Connect the Adapter to the socket of the WI-FI controller and plug the adapter
into a power outlet. Enjoy the Smart Floor Lamp now.
  • Page 1 1

VOCOlinc FL2201 Mode d'emploi

Taper
Mode d'emploi

dans d''autres langues