Amazfit A1910 Manuel utilisateur

Marque: Amazfit

Modèle: A1910

Taper: Manuel utilisateur

Amazfit GTR 42mm

Product Manual

Charging base × 1 Instruction Manual × 1Smartwatch with the band × 1

01 Package Contents

02 About the Watch

Note: If the watch is powered off and doesn’t turn on when you press and hold the power button, the

battery may be running low. Please charge the watch and try again.

1. Press once to light up the screen

2. Press and hold the button to turn the watch off or

to restart it

Power button:

Heart rate sensor

Charging plates

Function button

03 Installing the App

The watch works with the Amazfit App. The Amazfit App helps you control your smartwatch

and all its functions.

1.

2.

Press and hold the power button to turn the watch on.

Scan the QR code on the Instruction Manual with your mobile

phone to download the Amazfit App to your mobile phone. You

can also download the latest version of the Amazfit App from

the Google Play Store or Apple App store.

Note:

1.

2.

For a better user experience, please use the most recent version

of the Amazfit App.

The operating system needs to be Android 5.0, iOS10.0, or above.

1. Open the Amazfit App on your mobile phone and create an account. Please login if you

already have an account.

2. From the device list, select the watch you want to pair. Finish pairing by following the

instructions on the app.

3. Once the pairing is done, the watch will display the correct time. You can set the other watch

functions as needed.

Note:

Do not pair the watch directly using your mobile phone’s

Bluetooth. Follow the steps in the app to pair your watch

correctly.

04 Pairing the Watch

Only use the original charger to charge your watch. The charging plates on the back of the

watch should be aligned with those of the charger. Once the watch begins to charge, the

charging indicator will appear on the screen.

05 Charging the Watch

Note:

Only use the original charging base provided in the product

package to charge your watch. Also make sure that the

charging base is always kept dry.

Note:

1. Once the strap is assembled, pull the strap properly to ensure it is installed successfully.

2. The leather strap is not waterproof or water resistant. Please keep it away from any liquids.

If you are planning to wear your watch during swimming or any other activities that may

expose to water, please replace the leather strap with a silicon one.

1. The strap can be adjusted according to your wrist size.

2. Please refer to the illustrations to disassemble or assemble the watch strap.

06 Disassembly and Assembly of the Watch Strap

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including the interference that may cause

undesired operation.

FCC ID:2AC8UA1910

Any changes or modiﬁcations that are not expressly approved by the party responsible for the

compliance may void the user’s authority to operate the device.

07 Regulatory Notice

Note: This device has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interferences in a residential installation. This device generates,

uses, and may radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this product does cause

harmful interference to radio or television reception, which can be determined by turning the

device off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the device and receiver.

- Connect the device into an outlet on a circuit dierent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure

requirement. The device can be used in portable exposure

condition without restriction.

This device complies with Industry Canada license-exempt RSS standard(s). Operation is

subject to the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference, including interference that may cause undesired

operation if the device.

IC:21806-A1910 CAN

ICES-3(B)/NMB-3(B)

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils

radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of

a type and the maximum (or lesser) gain approved for the transmitter by Industry Canada. To

reduce the potential of radio interference to other users, the antenna type and its gain should be

so chosen that the equivalent isotopically radiated power (e.i.r.p.) is not more than that

necessary for successful communication.

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner

avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par

Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention

des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance

isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement

d'une communication satisfaisante.

The following symbol signiﬁes that this device has to be disposed separately from

ordinary household wastes at the end of its life. Please kindly be aware that this is

your responsibility to dispose the electronic device at recycling centers so as to

help conserve the natural resources.

08 Disposal and Recycling Information

Hereby, Anhui Huami Information Technology Co., Ltd. declares that the radio device type

A1910 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of

conformity is available at the following internet address:

http://en.amazﬁt.com/support.html

For more regulatory information and product certiﬁcation/compliance logos related

to Amazfit GTR, please go to Regulatory on your Amazfit GTR.

09 Certiﬁcations and Safety Approvals

1. The device is water resistant with a certified rating of 5ATM. This means that the device is

resistant to rain and can be worn while showering. It may also be used in shallow-water

activities, such as swimming in a pool.

2. However, the watch should not be used when scuba diving, bathing, taking a sauna, or in

other activities involving a high-velocity of water or the submersion below shallow depth.

4. Please do not operate the watch underwater. After submerging, dry it with a dry cloth before

operating or charging.

3. The watch is not protected against chemical reagents, acidic or alkaline solutions, etc.

Defects caused by liquid damages are not covered under the warranty.

10 Safety Notice

11 Basic Parameters

Product model: A1910

Battery capacity: 195 mAh

Wireless connection: BT 5.0, BLE

Input: 5 V 300 mA MAX

Frequency: 2402–2480 MHz

Max. Output: 0 dBm

Operating temperature: 0°C to 45°C

Water resistance rating: 5 ATM

Device requirements: Devices installed with Android 5.0 or iOS 10.0 or above OS versions

The Amazfit Limited Warranty covers Amazfit products against manufacturing defects beginning on

the original purchase date. The warranty period is 12 months or other period as the applicable

consumer laws in the consumer’s country of purchase require. Our warranty is in addition to

rights provided by applicable consumer laws.

Official website: en.amazﬁt.com

Support: support.amazﬁt.com

Email: support@amazﬁt.com

Importer:

Beryko s.r.o.

Na Roudné 1162/76, 301 00 Plzeň

www.beryko.cz

12 Warranty and Return Policy

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

Amazfit A1910 Manuel utilisateur

Marque: Amazfit

Modèle: A1910

Taper: Manuel utilisateur

Télécharger le PDF

dans d''autres langues

English: Amazfit A1910 User manual

Documents connexes

Autres documents