Brookstone Wireless TV Headphones Start Manual

Marque: Brookstone

Modèle: Wireless TV Headphones

Catégorie: Écouteurs

Taper: Start Manual

840048_INS_TV Listener Headphones

Instructions Doc. Size: 400mm W x 115mm H Folded Size: 50mmW x 115mmH

Output at 100% Prints 1/1 Black Finishing: Trim to Crops; Accordion Fold: 7 folds

NiMH BATTERY WARNINGS

This device contains a NiMH battery.

The battery must be recycled or

disposed of properly. Contact your

local waste management office for

information on battery recycling

or disposal.

FCC INFORMATION

This equipment has been tested

and found to comply with the

limits for a Class B Digital Device,

pursuant to Part 15 of the FCC

Rules. These limits are designed to

provide reasonable protection against

harmful interference in a residential

installation. This equipment generates,

uses, and can radiate radio frequency

energy and, if not installed and used

in accordance with the instructions,

may cause harmful interference to

radio communications. However, there

is no guarantee that interference will

not occur in a particular installation.

If this equipment does cause harmful

interference to radio or television

reception, which can be determined

by turning the equipment off and

on, the user is encouraged to try to

correct the interference by one or

more of the following measures:

• Reorient or relocate the

receiving antenna.

• Increase the distance between

the equipment and receiver.

• Connect the equipment to an outlet

on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an

experienced radio/TV technician

for help.

This equipment complies with

Part 15 of the FCC Rules.

Operation is subject to the

following two conditions:

1. This equipment may not cause

harmful interference.

2. This equipment must accept any

interference received, including

interference that may cause

undesired operation.

Modifications not authorized by the

manufacturer may void the user’s

authority to operate this device.

This equipment complies with FCC

RF radiation exposure limits set forth

for an uncontrolled environment. This

transmitter must not be co-located or

operating in conjunction with any other

antenna or transmitter.

RSS INFORMATION

This device complies with RSS-210

of the IC Rules; Operation is subject

to the following two conditions: (1)

this device may not cause harmful

interference, and (2) this device must

Wireless TV Headphones

ENJOY THE SHOW - WITHOUT

DISTURBING OTHERS

840048

Merrimack, New Hampshire, USA 03054

800-846-3000 • Brookstone.com

accept any interference received,

including interference that may cause

undesired operation.

Cet appareil est conforme à la norme

RSS-210 de la règlementation

d'Industrie Canada ; son utilisation

est soumise aux deux conditions

suivantes :

(1) l'appareil ne doit pas produire de

brouillage, et

(2) l'utilisateur de l'appareil

doit accepter tout brouillage

radioélectrique subi, même si le

brouillage est susceptible d'en

compromettre le fonctionnement.

The device meets the exemption from

the routine evaluation limits in section

2.5 of RSS 102 and compliance with

RSS-102 RF exposure, users can

obtain Canadian information on RF

exposure and compliance.

Le dispositif rencontre l'exemption

des limites courantes d'évaluation

dans la section 2.5 de RSS 102

et la conformité à l'exposition

de RSS-102 rf, utilisateurs peut

obtenir l'information canadienne sur

l'exposition et la conformité de rf.

This Class B digital apparatus

complies with Canadian ICES-003.

Cet appareil numérique de la classe

B est conforme à la norme NMB-003

du Canada

LOCATION OF PARTS

AND CONTROLS

1. Charging Pins/Contacts

2. Transmitter LED Indicator

3. Power Button

4. Power LED Indicator

5. Volume Up Button

6. Volume Down Button

7. 3.5mm In Jack

8. Attenuation Switch

9. RCA Audio In

10. Power Switch

11. DC In Port

12. 2xAAA NiMH Rechargeable

Batteries

13. AC/DC Adapter

14. RCA (male)-to-3.5mm (male)

Y-Cable

15. 3.5mm (female)-to-RCA (male)

Y-Cable

Right Ear Pad

Transmitter

LOCATION OF PARTS

AND CONTROLS

LOCATION OF PARTS

AND CONTROLS

ONE (1) YEAR LIMITED WARRANTY

Brookstone

warrants this product against

defects in materials and/or workmanship under

normal use for a period of ONE (1) YEAR from

the date of purchase by the original purchaser

(“Warranty Period”). If a defect arises and a

valid claim is received within the Warranty

Period, at its option, Brookstone will either

1) repair the defect at no charge, using

new or refurbished replacement parts, or

2) replace the product with a new product that

is at least functionally equivalent to the original

product, or 3) provide a store credit in the

amount of the purchase price of the original

product. A replacement product or part, including

a user-installable part installed in accordance with

instructions provided by Brookstone, assumes

the remaining warranty of the original product.

When a product or part is exchanged, any

replacement item becomes your property and the

replaced item becomes Brookstone’s property.

When a store credit is given, the original product

must be returned to Brookstone and becomes

Brookstone’s property.

Obtaining Service: To obtain warranty service,

call Brookstone Limited Warranty Service at

1-800-292-9819. Please be prepared to

describe the product that needs service and

the nature of the problem. A purchase receipt

is required. All repairs and replacements must

be authorized in advance. Service options, parts

availability and response times will vary. You are

responsible for delivery and the cost of delivery of

the product or any parts to the authorized service

center for replacement, per our instructions.

Limits and Exclusions: Coverage under this

Limited Warranty is limited to the United States of

America, including the District of Columbia and the

U.S. Territories of Guam, Puerto Rico, and the U.S.

Virgin Islands. This Limited Warranty applies only

to products manufactured for Brookstone that can

be identified by the “Brookstone” trademark, trade

name, or logo affixed to them or their packaging.

The Limited Warranty does not apply to any non-

Brookstone products. Manufacturers or suppliers

other than Brookstone may provide their own

warranties to the purchaser, but Brookstone,

in so far as permitted by law, provides these

products “as is.” This warranty does not apply to:

a) damage caused by failure to follow instructions

relating to product’s use or the installation of

components; b) damage caused by accident,

abuse, misuse, fire, floods, earthquake or other

external causes; c) damage caused by service

performed by anyone who is not a representative

of Brookstone; d) accessories used in conjunction

with a covered product; e) a product or part

that has been modified to alter functionality or

capability; f) items intended to be periodically

replaced by the purchaser during the normal

life of the product including, without limitation,

batteries or light bulbs; g) any product sold

“as is” including, without limitation, floor

demonstration models and refurbished items;

or h) a product that is used commercially or for a

commercial purpose.

BROOKSTONE SHALL NOT BE LIABLE

FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES RESULTING FROM THE USE

OF THIS PRODUCT, OR ARISING OUT OF

ANY BREACH OF THIS WARRANTY. TO THE

EXTENT PERMITTED BY APPLICABLE LAW,

BROOKSTONE DISCLAIMS ANY AND ALL

STATUTORY OR IMPLIED WARRANTIES,

INCLU DING, WITHOUT LIMITATION,

WARRANTIES OF MERCHANTABILITY,

FITNESS FOR A PARTICULAR PURPOSE

AND WARRANTIES AGAINST HIDDEN

OR LATENT DEFECTS. IF BROOKSTONE

CANNOT LAWFULLY DISCLAIM STATUTORY

OR IMPLIED WARRANTIES, THEN TO THE

EXTENT PER MITTED BY LAW, ALL SUCH

WARRANTIES SHALL BE LIMITED IN

DURATION TO THE DURATION OF THIS

EXPRESS WARRANTY.

Some states disallow the exclusion or limitation of

incidental or consequential damages or how long

an implied warranty lasts, so the above exclusions

or limitations may not apply to you. This warranty

gives you specific legal rights and you may also

have other rights, which vary from state to state.

CHARGING THE HEADPHONES

1. Carefully remove the Left Ear Pad

and insert 2 AAA rechargeable

batteries (included) according to

the polarity markings. Replace the

ear pad.

2. For first time use, charge the

headphones for at least 7 hours.

To charge headphones, ensure the

headphones are OFF by pressing

the Power button on the Right Ear

Pad until the Power LED turns

off. Place the headphones on the

top of transmitter ensuring the

charging contacts are aligned.

The transmitter LED is PURPLE

to show the headphones are

charging. When the headphones

are fully charged the transmitter

LED is BLUE.

Note: When headphones have LOW

BATTERY, the Power LED will flash

RED and a beep will sound. The

beep will sound every minute until

the headphones shut down due to

the exhausted battery.

TRANSMITTER SET UP

1. Plug the AC/DC power adapter

into the DC jack located on the

rear of the transmitter. Plug the

other end of the AC/DC power

adapter into an electrical wall

outlet.

2. Slide the power switch to ON. The

transmitter LED will flash AMBER

for several seconds and then will

be solid AMBER.

3. Connect the transmitter to an

audio source using the included

RCA cables.

4. If the audio source is a TV, DVD,

VCD, VCR, or Hi-Fi, set the

attenuation to -8dB for the

recommended signal strength.

If the audio source is a CD

or MP3 player, phone, or tablet,

set the attenuation to 0dB for the

recommended signal strength.

5. When the transmitter receives an

audio signal, the transmitter LED is

solid AMBER. After 5 minutes

of no audio signal detected, the

transmitter LED is solid BLUE.

CARE AND STORAGE

1. Dust the headphones and

transmitter with a soft,

dry cloth.

2. Store the headphones and

transmitter in a cool, dry place.

SPECIFICATIONS

Power Supply (Transmitter): DC 5V,

550mA

Power Supply (Headphones): 2 x AAA

rechargeable NiMH batteries

Frequency: 2.4 GHz Digital

Transmission mode: UHF Stereo

Range: Up to 100 ft (approx. 30 m)

S/N Radio: 75 dB

Frequency Response: 30Hz~20KHz

Charging Time: Approx. 3 hours

(subsequent uses after first initial

charge of 7 hours)

Battery Life: Approx. 10 hours

USING THE HEADPHONES

WITH THE TRANSMITTER

1. To turn the headphones ON, press

and hold the Power button on the

Right Ear Pad until the Power LED

is RED.

2. The headphones will

automatically sync to the

transmitter. When the

headphones and transmitter are

synced, the Power LED is

GREEN.

3. Use the volume controls on the

Right Ear Pad and the audio

source to change the volume. A

beep will sound when pressing

the Volume + button when the

maximum volume is reached.

4. After 5 minutes of no audio

signal detected, the Power LED

is solid RED.

5. To turn the headphones OFF,

press and hold the power

button until the Power LED is

OFF.

Note: If there is interference or poor

signal reception, audio from the

headphones will mute and the Power

LED will change to RED while the

headphones and transmitter search

for another channel.

TROUBLESHOOTING

NO SOUND

• Ensure the AC/DC adaptor is

securely plugged into the

transmitter.

• Ensure the headphones are

powered On.

• Ensure the headphones and the

transmitter are synced.

• The headphones may need to be

charged.

• The headphones may need to move

closer to the transmitter.

• Ensure the audio device is

switched ON.

• The volume of the audio device

may need to be increased.

USING THE HEADPHONES

WITH THE DIRECT PLUG

1. Connect the headphones directly

to an audio source by plugging

one end of a 3.5mm-to-3.5mm

cable (not included) into the port

on the Right Ear Pad and the

other end into the audio source.

2. Use the volume controls on

the audio source to change the

volume.

Note: When using a 3.5mm-to-

3.5mm cable, the Power LED is OFF.

Brookstone Wireless TV Headphones Start Manual

Marque: Brookstone

Modèle: Wireless TV Headphones

Catégorie: Écouteurs

Taper: Start Manual

Télécharger le PDF

rapport

dans d''autres langues

English: Brookstone Wireless TV Headphones

Brookstone Wireless TV Headphones Start Manual

Brookstone Wireless TV Headphones Start Manual

dans d''autres langues

Documents connexes

Autres documents