Samsung DVD-P380 Manuel utilisateur

DVD Player

DVD-P380

CA

AK68-01509V

www.samsung.com/ca

ENG-2

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including

amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your

outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long peroids of

time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus. Service is also required if the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

ENG-3

Precautions

This symbol indicates that

dangerous voltage consisting a risk

of electric shock is present within

this unit.

This symbol indicates that there are

important operating and

maintenance instructions in the

literature accompanying this unit.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Do not install this equipment in a confined space such as a bookcase or similar unit.

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

FCC NOTE (for U.S.A):

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on.

The user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This class B digital apparatus meets all requirements of the Canadian Interference --

Causing Equipment Regulations.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

PRODUCTO LÁSER CLASE 1

Note to CATV system installer : This reminder is provided to call CATV system installer’s attention to

Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that

provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be

connected to the grounding system of the building as close to the point of cable entry as practical.

This product satisfies FCC regulations when shielded cables and connectors are used to connect the

unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios

and televisions, use shielded cables and connectors for connections.

Caution : FCC regulations state that any unauthorized changes or modifications to this equipment may

void the user’s authority to operate it.

CALIFORNIA USA ONLY :

This Perchlorate warning applies only to primary CR (Maganese Dioxide) Lithium coin cells in the product sold

or distributed ONLY in California USA “Perchlorate Material - special handling may apply , See

www.dtsc.ca.gov/hazardouswaste/perchlorate.

ENG-4

CAUTION

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR

YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

Note:

• This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.

• This DVD player is designed and manufactured to respond to the Region Management Information.

If the Region number of a DVD disc does not correspond to the Region number of this DVD player,

the DVD player cannot play the disc.

• The product unit accompanying this user manual is licensed under certain intellectual property rights

of certain third parties. In particular, this product is licensed under the following US patents:

5,457,669 5,561,649 5,705,762 5,987,417 6,043,912 6,222,983 6,272,096 6,377,524

6,377,531 6,385,587 6,389,570 6,408,408 6,466,532 6,473,736 6,477,501 6,480,829 6,556,520

6,556,521 6,556,522 6,578,163 6,594,208 6,631,110 6,658,588 6,674,697 6,674,957 6,687,455

6,697,307 6,707,985 6,721,243 6,721,493 6,728,474 6,741,535 6,744,713 6,744,972 6,765,853

6,765,853 6,771,890 6,771,891 6 775,465 6,778,755 6,788,629 6,788,630 6,795,637 6,810,201

6,862,256 6,868,054 6,894,963 6,937,552.

This license is limited to private non-commercial use by end-user consumers for licensed contents.

No rights are granted for commercial use. The license does not cover any product unit other than this

product unit and the license does not extend to any unlicensed product unit or process conforming to

ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit.

The license only covers the use of this product unit to encode and/or decode audio files conforming

to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product

features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

Handling Cautions

• Before connecting other components to this player, be sure to turn them all off.

• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s

internal parts may be damaged.

• Do not put a flower vase filled with water or any small metal objects on the player.

• Be careful not to put your hand into the disc tray.

• Do not place anything other than the disc in the disc tray.

• Exterior interference such as lightning and static electricity can affect normal operation of this player.

If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the

AC power cord to the AC power outlet. The player will operate normally.

• Be sure to remove the disc and turn off the player after use.

• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long

periods of time.

• Clean the disc by wiping in a straight line from the inside to the outside of the disc.

• The Main plug is used as a disconnect device and shall stay readily operable at any time.

• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,

shall be placed on the apparatus.

Disc Storage

Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.

• Do not keep under direct sunlight.

• Keep in a cool ventilated area.

• Store vertically.

• Keep in a clean protection jacket.

Maintenance of Cabinet

For safety reasons, be sure to disconnect the AC power cord from the AC outlet.

• Do not use benzene, thinner, or other solvents for cleaning.

• Wipe the cabinet with a soft cloth.

Install Batteries in the Remote control

1

Open the battery

cover on the back of

the remote control.

2

Insert two AAA batteries.

Make sure that the

polarities (+ and -) are

aligned correctly.

3

Replace the battery

cover.

If the remote control doesn’t operate properly:

- Check the polarity + - of the batteries.

- Check if the batteries are drained.

- Check if the remote control sensor is blocked by obstacles.

- Check if there is any fluorescent lighting nearby.

Before you start

Accessories

ENG-5

Remote

Control

Batteries for

Remote Control

(AAA Size)

User’s Manual Video/Audio

Cable

ENG-6

TABLE OF CONTENTS

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Chapter 1:

Setup

General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Tour of the Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Chapter 2: Connections

Choosing a connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Chapter 3: Basic Functions

Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Using the Search and Skip Functions . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Using the Display Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Using the Disc and Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Slow Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Chapter 4: Advanced Functions

Adjusting the Aspect Ratio (EZ View). . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Selecting the Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Selecting the Subtitle Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Changing the Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Using the Bookmark Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Using the Zoom Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Clips Menu for MP3/WMA/JPEG/MPEG4/CD Audio . . . . . . . . . . . . . . . 32

Folder Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

MP3/WMA/CD Audio Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

MPEG4 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Playing Media Files Using the USB Host Feature . . . . . . . . . . . . . . . . . 37

CD Ripping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Picture CD Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Chapter 5: Navigating the Setup Menu

Using the Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Setting Up the Language Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Setting Up the Audio Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Setting Up the Display Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Setting Up the Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Chapter 6: Reference

Firmware Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

USB Host Feature Supported Products . . . . . . . . . . . . . . . . . . . . . . . . . 55

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

ENG-7

Chapter 1

SETUP

Setup

General Features

Excellent Sound

Dolby Digital, a technology developed by Dolby

Laboratories, provides crystal clear sound

reproduction.

Screen

Both regular and widescreen(16:9) pictures can be

viewed.

Slow Motion

An important scene can be viewed in slow motion.

Parental Control (DVD)

The parental control allows users to set the level

necessary to prohibit children from viewing harmful

movies such as those with violence, adult subject

matter, etc.

Various On-Screen Menu Functions

You can select various languages (Audio/Subtitle)

and screen angles while enjoying movies.

Progressive Scan

Progressive scanning creates an improved picture

with double the scan lines of a conventional

interlaced picture.

EZ VIEW (DVD)

Easy View enables picture adjustment to match your

TV's screen size (16:9 or 4:3).

Digital Photo Viewer (JPEG)

You can view Digital Photos on your TV.

Repeat

You can repeat a song or movie simply by pressing

the REPEAT button.

MP3/WMA

This unit can play discs created from MP3/WMA files.

MPEG4

This unit can play MPEG4 formats within an avi file.

CD Ripping

This feature lets you to copy audio files from Audio

CDs to a USB device in the MP3 format.(only Audio

CD (CD DA))

Note

- Discs which cannot be played with this

player.

• DVD-ROM • DVD-RAM

• CD-ROM • CDV

• CDI • CVD

• Super Audio CD(except CD layer)

• CDGs play audio only, not graphics.

- Ability to play back may depend on recording

conditions.

• DVD-R, +R

• CD-RW

• DVD+RW, -RW (V mode)

- The unit may not play certain CD-R, CD-RW

and DVD-R due to the disc type or recording

conditions.

COPY PROTECTION

Many DVD discs are encoded with copy

protection. Because of this, you should only connect

your DVD player directly to your TV, not to a VCR.

Connecting to a VCR results in a distorted picture

from copy-protected DVD discs.

This product incorporates copyright protection

technology that is protected by methods claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection

technology must be authorized by Macrovision

Corporation, and is intended for home and other

limited viewing uses only unless otherwise authorized

by Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

PROGRESSIVE SCAN OUTPUTS

(480p)

“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH

DEFINITION TELEVISION SETS ARE FULLY

COMPATIBLE WITH THIS PRODUCT AND MAYCAUSE

ARTIFACTS TO BE DISPLAYED IN THE PICTURE, IF

PROGRESSIVE SCAN PICTURE PROBLEMS OCCUR, IT

IS RECOMMENDED THAT THE USER SWITCH THE

CONNECTION TO THE ‘STANDARD DEFINITION’(VIDEO)

OUTPUT. IF THERE ARE QUESTIONS REGARDING

YOUR TV SET COMPATIBILITYWITH THIS DVDPLAYER,

PLEASE CONTACT SAMSUNG'S CUSTOMER SERVICE

CENTER.”

ENG-8

SETUP

Disc Type and Characteristics

This DVD player is capable of playing the following types of discs with the corresponding logos:

Disc Markings Region Number

Both the DVD player and the discs are

coded by region. These regional

codes must match in order for the disc

to play. If the codes do not match, the

disc will not play.

The Region Number for this player

is described on the rear panel of the

player.

5”

3 1/2”

Single-sided 240 min.

Double-sided 480 min.

Single-sided 80 min.

Double-sided 160 min.

Audio

+

Video

- DVD contains excellent sound and

video due to Dolby Digital and

MPEG-2 system.

- Various screen and audio functions

can be easily selected through the

on-screen menu.

Disc Types (Logos)

Recording Types Disc Size Max. Playing Time Characteristics

DVD

5”

3 1/2”

74 min.

20 min.

Audio

- CD is recorded as a Digital Signal with

better audio quality, less distortion and

less deterioration of audio quality over

time.

AUDIO-CD

~

DIGITAL

SOUND

STEREO

NTSC

Play Region Number

NTSC broadcast system in U.S.A, Canada, Korea,

Japan, etc.

Dolby Digital disc

Stereo disc

Digital Audio disc

DTS disc

MP3 disc

You must only insert one DVD disc at a time.

Inserting two or more discs will not allow

playback and may cause damage to the DVD

player.

DivX Certification

DivX, DivX Certified,

and associated logos are

trademarks of DivXNetworks, Inc and

are used under license

ENG-9

Setup

SETUP

Description

Front Panel Controls

1. STANDBY/ON ( )

When STANDBY/ON is pressed on, the indicator goes out

and the player is turned on.

2. STANDBY Indicator

When the unit is first plugged in, this indicator lights up.

3. DISC TRAY

Place the disc here.

4. OPEN/CLOSE ( )

Press to open and close the disc tray.

5. DISPLAY

Operation indicators are displayed here.

6. SKIP ( / ) SEARCH

Allow you to search forward/backward through

a disc. Use to skip the title, chapter or track.

7. STOP ( )

Stops disc play.

8. PLAY/PAUSE ( )

Begin or pause disc play.

9. USB Host

Connect digital still camera, MP3 player, memory stick, Card

reader, or other removable storage devices.

Front Panel Display

Displays the Total playing time and

various messages concerning

operations such as PLAY, STOP, LOAD ...

NOdSC: No disc loaded.

OPEn: The disc tray is open.

LOAd: Player is loading disc information.

1

6

7

8

2

3

5

4

DVD-P380

9

6

ENG-10

SETUP

Rear Panel

1. DIGITAL AUDIO OUT JACKS

- Use either an coaxial digital cable to connect to a

compatible Dolby Digital receiver.

- Use a coaxial digital cable to connect to an A/VAmplifier

that contains a Dolby Digital, MPEG2 or DTS decoder.

2. COMPONENT VIDEO OUT JACKS

- Use these jacks if you have a TV with Component

Video in jacks. These jacks provide P

R

, P

B

and Y video.

-If

P-SCAN (480p)

is set to “ON” in Video Output of

the Setup Menu, progressive scan mode will work.

-If

I-SCAN (480i)

is set to “ON” in Video Output of the

Setup Menu, interlaced scan mode will work.

3. AUDIO OUT JACKS

Use audio cables to connect to the Audio input jacks of

your television or audio/video receiver

4. VIDEO OUT JACK

- Use a video cable to connect to the Video input jack on

your television.

Note

-

Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the

TV’s menu system.

- See pages 49 ~ 50 to get more information on how to use the setup menu.

1

34

2

ENG-11

Setup

SETUP

Tour of the Remote Control

1. DVD POWER Button

Turns the power on or off.

2. NUMBER Buttons

3. ZOOM Button / (-/--)

Enlarges the DVD Picture / Use this button to select the

channel of TV program by inserted the channel number

(TV mode).

4. SEARCH Buttons (

/

)

Allow you to search forward/backward through a disc.

5. VIDEO SEL. Button

Selects video output formats.

6. TV VOL (+, -) Buttons

Controls volume.

7. SKIP Buttons (

/

)

Use to skip the title, chapter or track.

8. STOP Button ( )

9. MENU Button

Brings up the DVD player’s menu.

10. ENTER/



/



,

¦¦

/



Buttons

This button functions as a toggle switch.

11. EZ VIEW Button

The aspect ratio of a picture can easily be adjusted

according to the screen size of your TV (16:9 or 4:3).

12. DISC MENU Button

Brings up the Disc menu.

13. OPEN/CLOSE ( ) Button

To open and close the disc tray.

14. AUDIO Button

Use this button to access various audio functions on a disc.

15. DVD Button

Press this button when you use a DVD player.

16. TV Button

Press this button to operate TV (only Samsung TV).

17. REPEAT A-B (Number 8) Button

Allows you to repeat play A-B on a disc.

18. STEP Button/TV Source

Advances play one frame at a time / Press this button to

select an available TV source (TV mode).

19. SUBTITLE Button

20. TV CH ( , ) Buttons

Channel selection.

21. PLAY/PAUSE Button ( )

Begin/Pause disc play.

22. RETURN Button

Returns to a previous menu.

23. INFO Button

Displays the current disc mode.

24. CANCEL Button

Use to remove menus or status displays from the screen.

25. USB Button

Each time the USB button is pressed, a display of USB

device selection will appear.

26. REPEAT Button

Allows you to repeat play a title, chapter, track, or disc.

1

2

3

4

5

6

7

8

9

10

15

11

12

13

16

17

18

19

20

21

22

23

24

14

25

26

ENG-12

Chapter 2

CONNECTIONS

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV

and other components.

Before Connecting the DVD Player

- Always turn off the DVD player, TV, and other devices before you connect or disconnect any

cables.

- Refer to the user’s manual of the additional devices (such as a TV) you are connecting formore

information on those particular devices.

Connecting to a TV (Progressive)

- Connecting to your TV using Component video cables.

- You will enjoy high quality and accurate color reproduction images. Component video separates

the picture element into black and white(Y), blue (PB), red (PR) signals to present clear and clean

images. (Audio signals are delivered through the audio output).

1

Using Component video cables (not included), connect the

COMPONENT VIDEO OUT jacks on the rear of the DVD player

to the COMPONENT IN jacks of your TV.

To see the progressive video output,

- Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive

Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s

menu system.

- Depending on your TV, the connection method may differ from the illustration above.

2

Using the audio cables, connect the AUDIO (red and white)

OUT jacks on the rear of the DVD player to the AUDIO (red

and white) IN jacks of your TV.

Turn on the DVD player and TV.

4

Set the Video Output to P-SCAN (480p) in the display Setup

menu (See pages 49-50)

3

Press the input selector button on your TV remote control until

the Component signal from the DVD player appears on the TV

screen.

RED

WHITE

RED WHITE

RED

BLUE

GREEN

RED

BLUE

GREEN

Audio Cable

(Included)

Component cable

(not included)

ENG-13

Connections

CONNECTIONS

Connecting to a TV (Interlace)

- Connecting to your TV using Component video cables.

- You will enjoy excelllent quality and accurate color reproduction images. Component video

separates the picture element into black and white(Y), blue(P

B

), red(P

R

) signals to present clear

and clean images. (Audio signals are delivered through the audio output.)

Note

- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)

- The component jack of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “P

R

, P

B

, Y”

depending on the manufacturer. The number and position of the jacks may vary depending on the TV set.

Please refer to the user's manual of your TV.

1

Using Component video cables (not included), connect the

COMPONENT VIDEO OUT jacks on the rear of the DVD player

to the COMPONENT IN jacks of your TV.

2

Using the audio cables, connect the AUDIO (red and white)

OUT jacks on the rear of the DVD player to the AUDIO (red

and white) IN jacks of your TV.

Turn on your DVD player and TV.

4

Press the input selector on your TV remote control until the

Component signal from the DVD player appears on the TV

screen.

3

Set the Video Output to I-SCAN (480i) in the Display Setup

menu. (See pages 49 to 50)

RED

WHITE

RED

WHITE

RED

BLUE

GREEN

RED

BLUE

GREEN

Audio Cable

(Included)

Component cable

(not included)

ENG-14

CONNECTIONS

1

Using Video/Audio cables, connect the VIDEO (yellow)/AUDIO

(red and white) OUT jacks on the rear of the DVD player to the

VIDEO (yellow)/AUDIO (red and white) IN jacks of your TV.

2

Turn on your DVD player and TV.

Note

- Noise may be generated if the audio cable placed too close to the power cable.

- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)

- The number and position of the jacks may vary depending on your TV set. Please refer to the user's manual

of your TV.

- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) jack of the DVD

player.

3

Press the input selector button on your TV remote control until

the Video signal from the DVD player appears on the TV

screen.

Connecting to a TV (Video)

DIGITAL AUDIO

RED

WHITE

YELLOW

RED

WHITE

YELLOW

Audio

Cable

Video

Cable

ENG-15

Connections

CONNECTIONS

Note

- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause

damage to the speakers and your ears.

- Please set the audio in the menu screen according to the Amplifier.(See pages 47 to 48)

- The position of jacks may vary depending on the Amplifier.

Please refer to the user's manual of the Amplifier.

Connecting to an Audio System (2 Channel Amplifier)

DIGITAL AUDIO

1

Using the audio cables, connect the AUDIO (red and white)

OUT jacks on the rear of the DVD player to the AUDIO (red

and white) IN jacks of the Amplifier.

2

Using the video signal cable(s), connect the VIDEO ,

COMPONENT jacks on the rear of the DVD player to the

VIDEO, COMPONENT jacks of your TV as described on pages

12 to 16.

3

Turn on your DVD player, TV, and Amplifier.

4

Press the input select button of the Amplifier to select the audio

input your DVD player is connected to in order to hear sound.

Refer to your Amplifier's user manual to set the Amplifier's

audio input.

RED

WHITE

RED

WHITE

2-Channel stereo amp

Audio Cable

(Included)

ENG-16

CONNECTIONS

Note

- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause

damage to the speakers and your ears.

- Please set the audio in the menu screen according to the Amplifier you have connected. (See pages 47 to 48)

- The position of jacks may vary depending on the Amplifier.

Please refer to the user's manual of the Amplifier.

Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)

DIGITAL AUDIO

1

If using a Coaxial cable (not included), connect the DIGITAL

AUDIO OUT (COAXIAL) jack on the rear of the DVD player to

the DIGITAL AUDIO IN (COAXIAL) jack of the Amplifier.

2

Using the video signal cable(s), connect the VIDEO,

COMPONENT jacks on the rear of the DVD player to the

VIDEO, COMPONENT jacks of your TV as described on pages

12 to 14.

3

Turn on your DVD player, TV, and Amplifier.

4

Press the input select button of the Amplifier to select the audio

input your DVD player is connected to in order to hear sound.

Refer to your Amplifier's user manual to set the Amplifier's

audio input.

Coaxial Cable

(not included)

Dolby digital or

DTS amp

ENG-17

Basic Functions

Chapter 3

BASIC FUNCTIONS

Playing a Disc

Before Play

- Turn on your TV and set it to the Video Input your DVD player is connected to with your TV’s

remote control.

- If you connected the DVD player to an external Audio System, turn on your Audio System and set

it to the correct Audio Input.

After plugging in the player, the first time you press the DVD POWER button, the screen

to the right appears: If you want to select a language, press a NUMBER button.

(This screen will only appear when you plug in the player for the first time.)

If the language for the startup screen is not set, the settings may change whenever you

turn the power on or off. Therefore, make sure that you select the language you want to

use.

Once you select a menu language, you can change it by pressing the button on the

front panel of the unit for more than 5 seconds with no disc in the unit. Then the

SELECT MENU LANGUAGE window appears again where you can reset your

preferred language.

Playback

1

Press the OPEN/CLOSE

()button.

The STANDBY indicator

light goes out and the tray

opens.

2

Place a disc gently into the

tray with the disc’s label

facing up.

3

Press the PLAY/PAUSE ( )

button or OPEN/CLOSE ( )

button to close the disc tray.

▼

RESUME function

When you stop disc play, the player remembers

where you stopped, so when you press the

PLAY/PAUSE ( ) button again, it will pick up

where you left off.

ENG-18

BASIC FUNCTIONS

4

Stopping Play

Press the STOP ( ) button

during play.

Note

- If the player is left in the stop mode for more than

one minute without pressing any buttons, a

screen saver will be activated. Press the

PLAY/PAUSE ( ) button to resume normal play.

- If the player is left in the stop mode for more than

30 minutes, the power will automatically turn off.

6

Pausing Play

Press the PLAY/PAUSE

()or STEP button on the

remote control during play.

▼

Screen stops, no sound.

To resume, press the PLAY/PAUSE ( ) button

once again.

Note

If the player is left for about 5 minutes in pause

mode, it will stop.

7

Step Motion Play (Except

CD)

Press the STEP button on

the remote control during

play.

▼

Each time the button is pressed, a new frame

will appear.

No sound is heard during STEP mode.

Press the PLAY/PAUSE ( ) button to resume

normal play.

You can only perform step motion play in the

forward direction.

▼

No sound is heard during slow mode.

Press the PLAY/PAUSE ( ) button to resume

normal play.

5

Removing the Disc

Press the OPEN/CLOSE

()button.

8

Slow Motion Play

Press the SEARCH (

/

)

button to choose the play

speed between 1/8, 1/4 and

1/2 of normal speed during

PAUSE or STEP mode.

Note

- The ( ) icon indicates an invalid button press.

- This player does not play HD DVDs or Blu-Ray

discs.

Basic Functions

ENG-19

BASIC FUNCTIONS

Using the Search and Skip Functions

During play, you can search quickly through a chapter or track, and use the skip function to jump to

the next selection.

Searching through a Chapter or Track

During play, press the

SEARCH ( or ) button

on the remote control for

more than 1 second.

▼

If you want to search at a faster speed on the

DVD or CD, press and hold the button.

Note

- The speed marked in this function may be

different from the actual playback speed.

- No sound is heard during search mode

(Except CD).

DVD

CD

2X, 4X, 64X, 128X

2X, 4X, 8X

Skipping Tracks

- When playing a DVD, if you press the SKIP ( )

button, it moves to the next chapter. If you press

the SKIP ( ) button, it moves to the beginning

of the chapter. Pressing the Skip button twice

makes the DVD move to the beginning of the

previous chapter.

- When playing a CD, if you press the SKIP ( )

button, it moves to the next track. If you press

the SKIP ( ) button, it moves to the beginning

of the track. Pressing the Skip button twice

makes the DVD move to the beginning of the

previous track.

During play, press the SKIP

( or ) button.

ENG-20

BASIC FUNCTIONS

Using the Display Function

When Playing a DVD/MPEG4

1

During play, press the

INFO button on the remote

control.

▼

You can select Info in the function menu by

pressing the MENU button.

2

Press the / buttons to

select the desired item.

3

Press the ¦/ buttons to

make the desired setup and

then press the ENTER

button.

▼

You may use the number buttons of the remote

control to directly access a title, chapter or to

start the playback from a desired time.

4

To make the screen

disappear, press the INFO

button again.

La page est en cours de chargement...

Samsung DVD-P380 Manuel utilisateur

Samsung DVD-P380 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents