NEC 750F Manuel utilisateur

Catégorie
Téléviseurs
Taper
Manuel utilisateur

Ce manuel convient également à

AccuSync
TM
750F
MENU SELECT
AS750FCovercontents 10/16/03, 9:38 AM1
Warning .................................................................................................................... 1
Contents ................................................................................................................. 2
Quick Start ............................................................................................................. 3
Controls .................................................................................................................. 6
Recommended Use.............................................................................................. 10
Specifications .......................................................................................................12
Features ................................................................................................................ 13
Troubleshooting .................................................................................................. 14
References .............................................................................................................15
Limited Warranty .................................................................................................16
Avertissement ......................................................................................................18
Contenu ..................................................................................................................19
Mise en marche rapide ...................................................................................... 20
Commandes .......................................................................................................... 23
Usage recommandé ............................................................................................ 27
Spécifications ...................................................................................................... 29
Fonctions ............................................................................................................. 30
Dépannage ............................................................................................................. 31
Références ........................................................................................................... 32
Garantie limitée .................................................................................................. 33
Index
AS750FCovercontents 10/16/03, 9:38 AM2
1
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE
THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS
CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
WARNING
CAUTION
RISK OF ELECTRIC SHOCK • DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This
symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this
unit has been included. Therefore, it should be read carefully in order to avoid any problems.
Canadian Department of Communications Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations
according to CAN/CSA C22.2 No.950.
FCC Information
1.
Use the attached specified cables with the AccuSync
750F (AS750F) color monitor so as not
to interfere with radio and television reception.
(1) Please use the supplied power cable or equivalent to ensure FCC compliance.
(2) Please use the supplied shielded video signal cable.
Use of other cables and adapters may cause interference with radio and television
reception.
2.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment gener-
ates, uses, and can radiate radio frequency energy, and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult your dealer or an experienced radio/TV technician for help.
If necessary, the user should contact the dealer or an experienced radio/television technician
for additional suggestions. The user may find the following booklet, prepared by the Federal
Communications Commission, helpful: ”How to Identify and Resolve Radio-TV Interference
Problems.“ This booklet is available from the U.S. Government Printing Office, Washington,
D.C., 20402, Stock No. 004-000-00345-4.
AS750Fmanualfinal.p65 11/11/03, 2:16 PM1
2
AccuSync
TM
750F
MENU SELECT
MENU SELECT
Your new NEC AccuSync
monitor box* should contain the following:
AccuSync Monitor with tilt/swivel base
Power Cord
Captive Signal Cable
User’s Manual
Contents
* Remember to save your original box and packing material to transport or ship
the monitor.
Power Cord
User’s Manual
Captive Signal Cable
AS750Fmanualfinal.p65 11/11/03, 2:16 PM2
3
Quick Start
Connecting the Tilt/Swivel stand
1. With the monitor unplugged from your system and the wall outlet, carefully
turn the monitor down on a firm table
2. Align the hooks on the tilt/swivel stand with the matching slots in the base of
the monitor.
3. Insert the hooks into slots.
4. Slide the tilt/swivel stand toward the front of the monitor until the latches click
into the locked position.
NOTE: For correct use of monitor, completely attach tilt/swivel base to the monitor.
NOTE:
To avoid self injury or damage to the monitor, attach and remove tilt/
swivel base with care.
CAUTION: Make certain that the tilt/swivel base
is locked firmly into place before turning the
monitor upright.
Removing the Tilt/Swivel stand
1. With the monitor unplugged from your system
and the wall outlet, carefully turn the monitor
upside down on a firm table.
2. Push down on the latch of the tilt/swivel
base and slide the tilt/swivel base
backward from the front of the monitor.
3. Pull out the tilt/swivel base from the
slots on the bottom of the monitor.
Slot
Hook
Latch
Hook
Firm Table
AS750Fmanualfinal.p65 11/11/03, 2:16 PM3
4
Quick Start –continued
To attach the AccuSync
monitor to your system, follow these
instructions:
1. Turn off the power to your computer.
2. If necessary, install the display card into your system. For more information,
refer to the display card manual.
3. For the PC: Plug the end of the video signal cable of the monitor in the video
signal connector of the computer. (Figure A.1). Tighten all screws.
For the Mac: Connect the Macintosh cable adapter (not included) to the
monitor connector on the Macintosh (Figure B.1). Attach the 15-pin mini
D-SUB end of the video signal cable to the Macintosh cable adapter on
the computer (Figure B.1). Tighten all screws.
NOTE: To obtain the AccuSync Macintosh cable adapter, call NEC-Mitsubishi
Electronics Display of America, Inc. at (800) 632-4662.
4. Connect one end of the power cord to the AccuSync monitor and the other
end to the power outlet (Figure C.1).
NOTE: If you use this monitor at AC125-240V, please refer to Recommended Use
section of this manual for proper selection of power cord.
5. Turn on the monitor and the computer.
NOTE: If you have any problems, please refer to the Troubleshooting section of
this User’s Manual.
Figure A.1
15-pin mini D-SUB
Captive Signal Cable
AS750Fmanualfinal.p65 11/11/03, 2:16 PM4
5
Quick Start –continued
15-pin mini D-SUB
Mac Adapter
(Not Included)
Captive Signal Cable
Figure B.1
Figure C.1
Power Cord
Power Outlet
AS750Fmanualfinal.p65 11/11/03, 2:16 PM5
6
Controls
Buttons
Use these buttons to choose or adjust items in
the on screen display.
MENU (or OSD)
Button
Use this button to enter or exit the on screen
display.
This Indicator lights up green when the monitor
operates normally. If the monitor is in DPMS
(Energy Saving) mode, this indicator color changes
to amber.
Power (DPMS)
Indicator
Use this button to turn the monitor on or off.
Power Button
Use this button to enter a selection in the on
screen display.
SELECT (or SET)
Button
Control Function
OSD (On Screen Display) control buttons on the front of the monitor function
as follows:
AS750Fmanualfinal.p65 11/11/03, 2:16 PM6
7
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the monitor is quick and easy with the On Screen Display Control system. A
short example is quick and easy given below to familiarize you with the use
of the controls. The following section is an outline of the available adjustments
and selections you can make using the OSD.
NOTE:
Allow the monitor to stabilize for at least 30 minutes before making image
adjustments.
To make adjustments in the On Screen Display, follow these steps:
1. Press the MENU (or OSD) Button, then the main menu of the OSD
appears.
2. To access a control, use the or buttons. When the icon you want
becomes highlighted, press the SELECT (or SET) Button.
3.
Use the buttons to adjust the item to the desired level.
4.
Accept the changes by pressing the SELECT (or SET) Button.
5.
Exit the OSD by Pressing the MENU (or OSD) Button.
Controls –continued
AS750Fmanualfinal.p65 11/11/03, 2:16 PM7
8
Controls –continued
OSD Adjust Description
Contrast
To adjust the contrast of the screen.
Brightness
To adjust the brightness of the screen.
Horizontal Position
To move image left and right.
Horizontal Size
To adjust image width.
Vertical Position
To move image up and down.
Vertical Size
To adjust image height.
Tilt
To correct image rotation.
Pincushion
To correct a concave or convex bowing of the image.
Pincushion Balance
To correct the balance of both sides bowing.
Parallelogram
To correctly adjust the skew of the image.
Trapezoid
To correct geometric distortion.
Top Corner
To correct an irregular distortion of the displayed image.
Bottom Corner
To correct an irregular distortion of the displayed image.
H Moire and V Moire
This item allows you to reduce the degree of moire.(Moire is caused by
interference Horizontal Scan Line with the periodical dot screen). It is normally
OFF(H:0/V:0). The moire adjustments may affect the focus of the screen. Moire
adjustments may shake slightly while the moire reduction function is on.
<<
>>
AS750Fmanualfinal.p65 11/11/03, 2:16 PM8
9
Controls –continued
COLOR
• 6500: Slightly reddish white.
• 9300: Slightly bluish white.
• K: Select the screen temperature which you prefer among reddish or
bluish or any color in between.
• RGB: Set your own color levels.
RECALL
You can use this function to reload the modified parameters for screen display
operation, as specified by the user after purchase: Position, Size, Side Pincush-
ion, Side Pincushion Balance, Parallelogram, Trapezoid (These recalled options
may differ depending on the mode selected: Preset, User, or New).
If you don’t want to recall the monitor to these modified settings, use the
button to select CANCEL and then press the SELECT (or SET) button.
RESET
Return to all factory default settings except "LANGUAGE": Brightness, Contrast,
Tilt, Color 9300K, Video Level, OSD Time, Moire (These reset options may differ
depending on the mode selected: Preset, User, or New).
If you don’t want to reset the monitor, use the button to select CANCEL and
then press the SELECT (or SET) button.
LANGUAGE
To choose the language in which the control names are displayed.
OSD Menus are available in 12 languages: English, German, French,
Spanish, Italian, Swedish, Finnish, Portuguese, Korean, Chinese , Russian
and Polish.
OSD TIME
Set the OSD time, i.e. the length of time a menu will remain on-screen
before it shuts off automatically. Adjust the time to 5, 10, 20, 30 or 60
seconds.
VIDEO LEVEL
This item is used to select the monitor's input signal level. The normal level
used for most PCs is 0.7V.
If the screen becomes suddenly washed-out or blurred, please select 1.0V
and try again.
DEGAUSS
To manually demagnetize the screen to avoid showing incorrect images or col-
ors.
INFORMATION
To inform users of preset and user mode data.
EXIT
To exit the OSD.
OSD
EXIT
AS750Fmanualfinal.p65 11/11/03, 2:16 PM9
10
Recommended Use
Safety Precautions and Maintenance
FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE
FOLLOWING WHEN SETTING UP AND USING
THE ACCUSYNC
COLOR MONITOR:
DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or
removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to
qualified service personnel.
Do not spill any liquids into the cabinet or use your monitor near water.
Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage
points, which can be harmful or fatal or may cause electric shock, fire or equipment failure.
Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire.
Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall,
causing serious damage to the monitor.
Keep the monitor away from high capacity transformers, electric motors and other devices such as
external speakers or fans, which may create strong magnetic fields.
If possible, position the monitor so that it is facing the east to minimize the effects of the earth’s
magnetic field.
Changing the direction of the monitor while it is powered on may cause image discoloration. To
correct this, turn the monitor off for 20 minutes before powering it back on.
When operating the monitor with its AC 125-240V worldwide power supply, use a power supply
cord that matches the power supply voltage of the AC power outlet being used. The power supply
cord you use must have been approved by and comply with the safety standards of your country.
In UK, use a BS-approved power cord with molded plug having a black (5A) fuse installed for use
with this monitor. If a power cord is not supplied with this monitor, please contact your supplier.
Do not place any objects onto the monitor and do not use the monitor outdoors.
Cleaning Your Monitor
A special coating is provided on the glass (CRT) surface of this monitor to reduce a reflection and
static electricity on the glass surface. Due to the delicate coating on the glass surface, use a lint-free,
non-abrasive cloth (cotton or equivalent) and a non-alcohol, neutral, non-abrasive cleaning solution
to minimize dust. If the screen requires more than a light cleaning, apply a soft neutral detergent and
water directly to a soft cloth and use it upon wringing water, to clean the glass surface. Clean your
monitor regularly.
CAUTION:
The following agents will cause damage to the CRT when cleaning the glass surface:
Benzene, thinner, acid/alkaline detergent, alcohol detergent, detergent with abrasive powder,
detergent with anti-static agent, detergent for cleaning.
Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
When the power supply cord or plug is damaged.
If liquid has been spilled, or objects have fallen into the monitor.
If the monitor has been exposed to rain or water.
If the monitor has been dropped or the cabinet damaged.
If the monitor does not operate normally by following operating instructions.
Allow adequate ventilation around the monitor so that heat can properly
dissipate. Do not block ventilated openings or place the monitor near a
radiator or other heat sources. Do not put anything on top of monitor.
The power cable connector is the primary means of detaching the system
from the power supply. The monitor should be installed close to a power
outlet which is easily accessible.
Handle with care when transporting. Save packaging for transporting.
CAUTION
AS750Fmanualfinal.p65 11/11/03, 2:16 PM10
11
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR
CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE
FOLLOWING WHEN YOU POSITION THE MONITOR:
Recommended Use –continued
Adjust the monitor height so that the top of
the screen is at or slightly below eye level.
Your eyes should look slightly downward
when viewing the middle of the screen.
Position your monitor no closer than 12 inches
and no further away than 28 inches from your
eyes. The optimal distance is 18 inches.
Rest your eyes periodically by focusing on
an object at least 20 feet away. Blink often.
Position the monitor at a 90° angle to
windows and other light sources to minimize
glare and reflections. Adjust the monitor tilt
so that ceiling lights do not reflect on your screen.
If reflected light makes it hard for you to see your screen, use an anti-glare filter.
Clean your monitor regularly. Use a lint-free, non-abrasive cloth and a
non-alcohol, neutral, non-abrasive cleaning solution to minimize dust.
Adjust the monitor’s brightness and contrast controls to enhance readability.
Use a document holder placed close to the screen.
Position whatever you are looking at most of the time (the screen or
reference material) directly in front of you to minimize turning your head
while you are typing.
Get regular eye checkups.
Ergonomics
To realize the maximum ergonomics benefits, we recommend the following:
Adjust the Brightness until the background raster disappears
Do not position the Brightness control to its maximum setting
Use the preset Size and Position controls with standard signals
Use the preset Color Setting and Sides Left/Right controls
Use non-interlaced signals with a vertical refresh rate between 70-85Hz for
the AccuSync
Do not use primary color blue on a dark background, as it is difficult to see
and may produce eye fatigue due to insufficient contrast
For more detailed information on setting up a healthy work environment, write the
American National Standard for Human Factors Engineering of Visual Display Terminal
Workstations – ANSI-HFS Standard No. 100-1988 – The Human Factors Society, Inc.
P.O. Box 1369, Santa Monica, California 90406.
AS750Fmanualfinal.p65 11/11/03, 2:16 PM11
12
Specifications
17 inches (16.0 inches viewable)
90 degree deflection
0.25mm dot pitch
AGARAS (Anti-Glare Anti-Reflective Anti-Static) coating
Horizontal Freq. 30 - 71kHz (Automatic)
Vertical Freq. 55 - 120Hz (Automatic)
Input Form Separate TTL, Positive/Negative
Signal Input 15 pin D-Sub Connector
Input Form
Separate, RGB Analog, 0.7Vp-p/75 ohm, Positive
DDC 2B
Normal
73W
Stand-by/Suspend
15W
DPM Off 5W
640 x 480 @ 60Hz to 120Hz
800 x 600 @ 55Hz to 110Hz
832 x 624 @ 55Hz to 106Hz
1024 x 768 @ 55Hz to 87Hz
1152 x 870 @ 55Hz to 77Hz
1280 x 1024 @ 55Hz to 60Hz
Max VESA 1280 x 1024 @ 60Hz
Recommend VESA 1024 x 768 @ 85Hz
Width 400 mm / 15.7 inches
Height 404mm / 15.9 inches
Depth 429 mm / 16.9 inches
Net 15.5 kg / 34.1 lbs
AC 100-240V~ 50/60Hz
2.0A @ 100-240V
Operating Conditions
Temperature 0˚C to 35 ˚C
Humidity 30 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 10 % to 90 % non-Condensing
Detached
Attached
Detached
Picture Tube
Sync Input
Video Input
Plug & Play
Power
Consumption
Resolutions
Dimensions
&Weight
(with tilt/swivel
stand)
Power Input
Current Rating
Environmental
Conditions
Tilt/Swivel Stand
Signal cable
Power cord
NOTE:
Information in this document is subject to change without notice.
AS750Fmanualfinal.p65 11/11/03, 2:16 PM12
13
Features
ClearFlat™ Shadow Mask CRT: Delivers an outstanding viewing experience with
a virtually flat image, eliminating distortion and reducing glare so that what you
see on-screen is as realistic and lifelike as what you see on your printed output.
The patented ClearFlat CRT also offers a high contrast screen with a fine grille
pitch, delivering crisp, clean text and graphics.
OptiClear
®
Screen Surface: Reduces reflection and glare and increases contrast
without sacrificing focus level, clarity or brightness. Along with the flat square
technology CRT, a high contrast screen delivers crisp, clean text and graphics.
Invar Shadow Mask: Holes in the thin metal sheet behind the glass of the CRT
surface correspond to each phosphor dot on the inner surface of the CRT’s
faceplate, allowing the correct electron beam (red, green, blue) to hit the correct
color phosphor for improved focus, brightness and color.
Dual Dynamic Beam Focus: Provides precise, continuous focus adjustments of the
electron beams and optimum image quality, even to the far edges of the screen.
AccuColor
®
Control System: Allows you to change the color settings on your
display to match your personal preference.
OSD (On-Screen Display) Controls: Allow you to quickly and easily adjust all
elements of your screen image via simple to use on-screen menus.
ErgoDesign
®
Features: Enhance human ergonomics to improve the working
environment, protect the health of the user and save money. Examples include
OSD controls for quick and easy image adjustments, tilt/swivel base for pre-
ferred angle of vision and compliance with MPRII guidelines for lower emissions.
Plug and Play: The Microsoft
®
solution with the Windows
®
95/98/2000/XP
operating system facilitates setup and installation by allowing the monitor to send
its capabilities (such as screen size and resolutions supported) directly to your
computer, automatically optimizing display performance.
IPM
®
(Intelligent Power Manager) System: Provides innovative power-saving
methods that allow the monitor to shift to a lower power consumption level when
on but not in use, saving two-thirds of your monitor energy costs, reducing
emissions and lowering the air conditioning costs of the workplace.
Reduced Magnetic Field
®
Technology: Reduces magnetic and alternating electric
field emissions and static electricity, addressing ergonomic concerns regarding
potential risks from extended computer monitor use.
Multiple Frequency Technology: Automatically adjusts monitor to the display
card’s scanning frequency, thus displaying the resolution required.
FullScan
®
Capability: Allows you to use the entire screen area in most resolu-
tions, significantly expanding image size.
AS750Fmanualfinal.p65 11/11/03, 2:16 PM13
14
Troubleshooting
No picture
Display card should be completely seated in its slot.
Power Button and computer power switch should be in the ON position.
Signal cable should be completely connected to display card/computer
and monitor.
Check connector for bent or pushed-in pins.
Image is scrolling or unstable
Signal cable should be completely attached to the computer and monitor.
Check pin assignments and signal timings of the monitor and your
display card with respect to recommended timings and pin assignments.
If the Macintosh cable adapter is used, check for proper connection or
make sure the display card is Macintosh compatible and that the card is
properly seated in the computer.
LED on monitor is not lit
(no green, orange color can be seen)
Power Switch should be in the ON position and power cord should
be connected.
Picture is fuzzy or color looks blotchy
Adjust Brightness and Contrast Controls.
Access the Degauss Control through OSD controls. Activate the
Degauss Control.
CAUTION: A minimum interval of 20 minutes should elapse before the
Deguass Control is used a second time when not switching
between modes.
Picture bounces or a wavy pattern is present
in the picture
Move electrical devices that may be causing electrical interference away
from the monitor.
See inside cover of User’s Manual for FCC information.
Edges of the display image are not square
Use the OSD Geometry Controls to straighten the edges.
If possible, position the front of the monitor facing east.
Display image is not centered, too small, or too large
Use the OSD Size and Position Controls to adjust the image.
AS750Fmanualfinal.p65 11/11/03, 2:16 PM14
15
References
NEC-Mitsubishi Monitor Customer Service & Support
Customer Service and Technical Support:
(800) 632-4662
Fax: (800) 695-3044
Parts and Accessories/Macintosh
Cable Adapter: (888) NEC-MITS [888-632-6487]
Customer Service Policies & Processes: http://www.necmitsubishi.com/
css/ServicePolicies/ServicePolicies.htm
Online Technical Support
Knowledge Base: http://www.necmitsubishi.com/
css/knowledgebase.cfm
Customer Service & Technical
Support Email: http://www.necmitsubishi.com/
css/techform.htm
Sales and Product Information
Sales Information Line: (888) NEC-MITS [888-632-6487]
Canadian Customers: (866) 771-0266, Ext#: 4037
Government Sales: (800) 284-6320
Government Sales email: [email protected]
Electronic Channels
World Wide Web: http://www.necmitsubishi.com
Product Registration: http://www.necmitsubishi.com/
productregistration
European Operations: http://www.nec-mitsubishi.com
Windows
®
95/98/Me/2000/XP INF File:
http://
www.necmitsubishi.com and select
“Downloads and Drivers ”
AS750Fmanualfinal.p65 11/11/03, 2:16 PM15
16
Limited Warranty
NEC-Mitsubishi Electronics Display of America, Inc. (hereinafter “NMD-A”) warrants this
Product to be free from defects in material and workmanship and, subject to the conditions set
forth below, agrees to repair or replace (at NMD-A’s sole option) any part of the enclosed unit
which proves defective for a period of three (3) years from the date of first consumer purchase.
Spare parts are warranted for ninety (90) days. Replacement parts or unit may be new or
refurbished and will meet specifications of the original parts or unit.
This warranty gives you specific legal rights and you may also have other rights, which vary
from state to state. This warranty is limited to the original purchaser of the Product and is not
transferable. This warranty covers only NMD-A-supplied components. Service required as a
result of third party components is not covered under this warranty. In order to be covered
under this warranty, the Product must have been purchased in the U.S.A. or Canada by the
original purchaser. This warranty only covers Product distribution in the U.S.A. or Canada by
NMD-A No warranty service is provided outside of the U.S.A. or Canada. Proof of Purchase
will be required by NMD-A to substantiate date of purchase. Such proof of purchase must be
an original bill of sale or receipt containing name and address of seller, purchaser, and the
serial number of the product.
It shall be your obligation and expense to have the Product shipped, freight prepaid, or
delivered to the authorized reseller from whom it was purchased or other facility authorized
by NMD-A to render the services provided hereunder in either the original package or a
similar package affording an equal degree of protection. All Products returned to NMD-A for
service MUST have prior approval, which may be obtained by calling 1-800-632-4662. The
Product shall not have been previously altered, repaired, or serviced by anyone other than a
service facility authorized by NMD-A to render such service, the serial number of the product
shall not have been altered or removed. In order to be covered by this warranty the Product
shall not have been subjected to displaying of fixed images for long periods of time resulting
in image persistence (afterimage effects), accident, misuse or abuse or operated contrary to
the instructions contained in the User’s Manual. Any such conditions will void this warranty.
NMD-A SHALL NOT BE LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL,
OR OTHER TYPES OF DAMAGES RESULTING FROM THE USE OF ANY NMD-A PRODUCT
OTHER THAN THE LIABILITY STATED ABOVE. THESE WARRANTIES ARE IN LIEU OF ALL
OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR THE
LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAM-
AGES SO THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU.
This Product is warranted in accordance with the terms of this limited warranty. Consumers
are cautioned that Product performance is affected by system configuration, software, the
application, customer data, and operator control of the system, among other factors. While
NMD-A Products are considered to be compatible with many systems, specific functional
implementation by the customers of the Product may vary. Therefore, suitability of a Product
for a specific purpose or application must be determined by consumer and is not warranted
by NMD-A.
For the name of your nearest authorized NEC-Mitsubishi Electronics Display service facility,
contact NEC-Mitsubishi Electronics Display at 1-800-632-4662.
AS750Fmanualfinal.p65 11/11/03, 2:16 PM16
17
Declaration of the Manufacturer
We hereby certify that the color monitor
AccuSync 750F (AS750F)
is
in compliance with
Council Directive 73/23/EEC:
EN 60950
Council Directive 89/336/EEC:
EN 55022
EN 61000-3-2
EN 61000-3-3
EN 55024
and marked with
NEC-Mitsubishi Electric Visual
Systems Corporation
4-13-23, Shibaura,
Minato-Ku
Tokyo 108-0023, Japan
AS750Fmanualfinal.p65 11/11/03, 2:16 PM17
18
AFIN D’ÉVITER TOUT RISQUE D’INCENDIE OU D’ÉLECTROCUTION, NE PAS EXPOSER CET APPAREIL À LA PLUIE OU À
L’HUMIDITÉ. NE PAS UTILISER LA FICHE D’ALIMENTATION POLARISÉE AVEC UNE PRISE DE CORDON DE RALLONGE
OU AUTRE QUE SI LES BROCHES PEUVENT ÊTRE ENTIÈREMENT INTRODUITES.
NE PAS OUVRIR LE BOÎTIER, LEQUEL CONTIENT DES COMPOSANTS À HAUTE TENSION. CONFIER TOUS TRAVAUX
À DU PERSONNEL TECHNIQUE QUALIFIÉ.
AVERTISSEMENT
ATTENTION
RISQUE DE DÉCHARGE ÉLECTRIQUE • NE PAS OUVRIR
ATTENTION : POUR ÉVITER TOUT RISQUE D'ÉLECTROCUTION, NE PAS OUVRIR LE COUVERCLE (L'ARRIÈRE). À L'INTÉRIEUR, AUCUNE
PIÈCE NE NÉCESSITE L'INTERVENTION DE L'UTILISATEUR. EN CAS DE PROBLÈME, S'ADRESSER À DU PERSONNEL TECHNIQUE QUALIFIÉ.
Ce symbole est une mise en garde contre les risques d'électrocution que présentent certaines parties dépourvues
d'isolation à l'intérieur de l'appareil. Il est donc dangereux d'établir le moindre contact avec ces parties
.
Ce symbole prévient l'utilisateur que des instructions d'utilisation et de maintenance de cet appareil sont fournies
avec ce mode d'emploi. Par conséquent, celles-ci doivent être lues attentivement pour éviter tout incident.
Déclaration de conformité au Département des Communications Canadien
DOC : Cet appareil numérique de classe B respecte toutes les exigences du Règlement
sur le matériel à l'origine d'interférences du Canada.
C-UL : Ce produit porte la marque «C-UL» et est conforme aux règlements de sûreté canadiens
selon
CAN/CSA C22.2 No.950.
Informations FCC
1.
Utiliser les câbles spécifiés fournis avec les moniteurs couleur AccuSync
750F (AS750F)
afin de ne pas
provoquer d'interférences avec la réception radio et télévision
.
(1) Prière d'utiliser le câble d'alimentation fourni ou équivalent pour assurer la conformité FCC.
(2) Câble de signal de type captif blindé.
L'utilisation d'autres câbles et adaptateurs peut provoquer des interférences avec la réception radio et
télévision.
2.
Cet appareil a passé avec succès les tests de conformité des spécifications d'équipements de Classe A, section
15 de la réglementation FCC. Ces spécifications ont été établies pour garantir un niveau inoffensif des
interférences produites pour une utilisation dans un lieu public. Cet appareil génère et utilise et peut irradier
des fréquences radio et, s'il n'est pas installé et utilisé en accord avec les directives de ce mode d'emploi, il
peut causer des interférences néfastes aux communications radio. Cependant, il n'est pas garanti qu'aucune
interférence ne se produira dans une installation particulière.
Si cet appareil provoque des interférences nuisibles à la réception radio ou télévision, lesquelles peuvent être
décelées en allumant et en éteignant l'appareil, il est recommandé à l'utilisateur d'essayer de corriger les
interférences en prenant une ou plusieurs des mesures suivantes :
Réorienter ou repositionner l'antenne de réception.
Augmenter l'espacement entre l'appareil et le récepteur.
Connecter l'appareil à une prise de courant sur un circuit différent de celui sur lequel le récepteur est
connecté.
Consulter son revendeur ou un technicien radio/TV expérimenté pour obtenir de l'aide.
Si nécessaire, l'utilisateur doit contacter le revendeur ou un technicien radio/TV afin d'obtenir des informations
supplémentaires. L'utilisateur peut se procurer le livret utile suivant, préparé par la Commission Fédérale des
Communications : «How to Identify and Resolve Radio-TV Interference Problems» (comment cerner et résoudre
les problèmes d’interférences radio/TV). Ce livret est disponible auprès du U.S. Government Printing Office,
Washington, D.C., 20402, Stock No. 004-000-00345-4.
AS750Fmanualfinal.p65 11/11/03, 2:16 PM18
1 / 1

NEC 750F Manuel utilisateur

Catégorie
Téléviseurs
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues