Yamaha Geo M620 Manuel utilisateur

GEO M6 Series

Geo M620 & Geo M6Bass Tangent Array Modules

User Manual

GEO M6 Series User Manual V1.01

Date: 2014/07/21

Page 2/62 PLEASE READ CAREFULLY BEFORE PROCEEDING

GEO Technology is radically new thinking

The GEO R&D Project has, to date, resulted in the following patent applications:

The GEO Hyperboloid Reflective Wavesource™ differs radically from the megaphone-variant type

horns you know and love (or hate). “Tried and true” methods will produce entirely unexpected results.

HRW technology produces precise and predictable results.

The Configurable Directivity Flange. A waveguide that allows the operator to alter its behaviour. An

unprecedented NEXO development that is easy to use – once you know how and when.

The Directivity Phase Device needs no operator input to function, but it is reassuring to know that the

coupling of the midrange of the system is considered as important as the high frequencies…

DSP-driven Directional Sub-bass devices are a new approach to controlling LF/VLF acoustic energy.

GEO is not hard to use when you understand how…

The technology behind GEO is revolutionary, but it is grounded in years of practical experience with the

problems of delivering high quality professional sound to large audiences at high SPL levels. The GEO

toolbox includes NS-1 - a simple yet powerful and highly predictive design tool. The array assembly

system is keyed to the design software and will easily enable you to deploy your design with great

precision. The NXAMP Amplified Digital TDcontroller provides driver protection and system optimization

as well as DSP-driven cardioid pattern control for the LS and RS series Subwoofers.

GEO is a high precision system

The GEO HRW™ controls acoustic energy more precisely than other multiple element waveguides. It

also makes GEO less forgiving of mistakes. Whilst conventional horns never combine into a coherent

array, they may deliver acceptable results even if the design and deployment of the system is less than

optimal. This is not the case with GEO where careless installation produces catastrophic results.

A GEO Tangent Array is not a “line array”

GEO Technology is equally effective in designing and deploying tangent horizontal arrays or curved

vertical arrays. For best results in a specific application the user needs to know how multi-speaker

arrays interact with audience geometry, along with the benefits and drawbacks of curved vertical arrays

and horizontal arrays.

Curved tangent arrays require different design techniques

For the past 20 years, sound reinforcement professionals have worked with horizontal arrays that use

conventional horns to deliver [more or less] ‘equal power to equal angles’. Curved vertical arrays are

designed to deliver [more or less] equal power to equal areas’. When arrays use conventional horns,

the lack of precision, overlap and interference masks errors in array design and aiming. The highly

precise GEO wavesource responds accurately, consistently and predictably to the design and

deployment of a curved vertical tangent array. This is why the GEO rigging system is designed to

control angular splay to 0.01° precision.

GEO curved tangent arrays require different operational techniques

Over the years, system designers and operators have developed a number of signal processing

techniques to disguise and partly overcome the limitations of horn design. “Frequency shading,”

“amplitude shading,” “system tuning,” all of these are tools of the advanced sound system operator.

NONE OF THESE TECHNIQUES ARE APPLICABLE TO GEO TANGENT ARRAYS. Instead of

enhancing the array’s performance they will severely degrade it.

Take time to learn how to get great results with GEO Technology. It is an investment that will pay off in

more satisfied clients, more efficient operating procedures and more recognition for your skill as a

sound system designer and operator. A comprehensive understanding of GEO theory, tangent arrays,

and specific features of the GEO M6 Series will help you to operate your system at its full potential.

PLEASE READ CAREFULLY BEFORE PROCEEDING Page 3/62

PLEASE READ CAREFULLY BEFORE PROCEEDING

BASIC PRECAUTIONS

Do not open the speaker system or attempt to disassemble the internal parts or modify them in any

way. The speaker system contains no user-serviceable parts. If it should appear to be malfunctioning or

damaged, discontinue use immediately and have it inspected by qualified NEXO service personnel.

Water exposure: Do not expose the speaker system to direct rain, do not use it near water or in wet

conditions. Do not place containers with liquid on speaker system as they might spill into openings. If

any liquid such as water seeps into the speaker system, have it inspected by qualified NEXO personnel.

SYSTEM DEPLOYMENT SAFETY RULES

Read User Manual before deployment. Before use of enclosed speaker system,

please ensure that anyone involved in system deployment understands the rigging –

stacking – pole mounting safety rules as described in the speaker system User Manual.

Failure to do this exposes people to potential injury or death.

Always consult qualified NEXO personnel if the device installation requires construction work and make

sure to observe the following precautions:

Mounting precautions

- choose mounting hardware and an installation location that can support the weight of the speaker

system;

- do not use speaker system handles for suspended installation;

- do not expose speaker system to excessive dust or vibration, or extreme cold or heat to prevent

possibility of component damage;

- do not place the speaker system in an unstable position from which it might fall accidentally;

- if speaker systems uses a stand, ensure that stand specifications are adapted, and that stand

height does not exceed 1.40m/55”; never move the stand while the speaker is in position.

Connection and powering precautions

- remove all connected cables before moving the speaker system;

- turn off AC power of all power amplifier units before connecting the speaker system;

- when turning on the AC power to the audio system, always turn on the power amplifier last; when

turning the AC power off, always turn off the power amplifier first;

- when used in cold conditions, a gradual power ramp up should applied to the system on an 5 mn

period to allow the loudspeaker components to stabilize during the very first minutes of usage.

Inspect the speaker system periodically.

Page 4/62 PLEASE READ CAREFULLY BEFORE PROCEEDING

SAFETY INSTRUCTIONS FOR NEXO TD CONTROLLERS

NEXO ANALOGUE PSTDCONTROLLERS, NX242 DIGITAL CONTROLLER,

NXAMP4x1 AND NXAMP4x4 POWERED CONTROLLERS ARE CLASS 1

APPARATUS AND MUST BE EARTHED.

THE GREEN AND YELLOW WIRE OF THE MAINS CORD MUST ALWAYS BE CONNECTED TO AN

INSTALLATION SAFETY EARTH OR GROUND. THE EARTH IS ESSENTIAL FOR PERSONAL

SAFETY AS WELL AS THE CORRECT OPERATION OF THE SYSTEM, AND IS INTERNALLY

CONNECTED TO ALL EXPOSED METAL SURFACES.

- Read these instructions.

- Keep these instructions.

- Heed all warnings.

- Follow all instructions.

- Do not use this apparatus near water.

- Clean only with dry cloth.

- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong are provided for your safety. If the provided plug does not

fit into your outlet, consult an electrician for replacement of the obsolete outlet. (US market)

- Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

- Only use attachments/accessories specified by the manufacturer.

- Unplug this apparatus during lightning storms or when unused for long periods of time.

- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

PLEASE READ CAREFULLY BEFORE PROCEEDING Page 5/62

HIGH SOUND PRESSURE LEVELS

Exposure to extremely high noise levels may cause permanent hearing loss.

Individuals vary considerably in susceptibility to noise-induced hearing loss but nearly

everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient

period of time. The U.S. Government’s Occupational and Health Administration (OSHA)

has specified the following permissible noise level exposures: Sound Duration Per

Day In Hours

Sound Level dBA, Slow Response

8

90

6

92

4

95

3

97

2

100

1 ½

102

1

105

½

110

¼ or less

115

According to OSHA, any exposure in excess of the above permissible limits could result in some

hearing loss. Ear plugs or protectors to the ear canals or over the ears must be worn when operating

this amplification system in order to prevent permanent hearing loss, if exposure is in excess of the

limits as set forth above. To ensure against potentially dangerous exposure to high sound pressure

levels, it is recommended that all persons exposed to equipment capable of producing high sound

pressure levels such as this amplification system be protected by hearing protectors while this unit is in

operation.

DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT

This symbol on the product or on its packaging indicates that it shall not be treated

as household waste. Instead it shall be handed over to the applicable collection

point for the recycling of electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent potential negative

consequence for the environment and human health, which could otherwise be

caused by inappropriate waste handling of this product. The recycling of materials

will help to conserve natural resources. For more detailed information about

recycling of this product, please contact your local city office, your household waste

disposal service or the shop where you purchased the product.

Page 6/62 CONTENTS

CONTENTS

PLEASE READ CAREFULLY BEFORE PROCEEDING .................................................................... 3

CONTENTS......................................................................................................................................... 6

1 INTRODUCTION ......................................................................................................................... 8

2 GEO M6 GENERAL SET-UP INSTRUCTIONS ........................................................................... 9

2.1 SPEAKER CONNECTION .......................................................................................................... 9

GEO M620 connectors ..................................................................................................... 9 2.1.1

GEO M6Bass connectors ................................................................................................. 9 2.1.2

Cabling ............................................................................................................................. 9 2.1.3

3 AMPLIFIER SELECTION FOR USE WITH GEO M6 & LS18 .................................................... 10

3.1 GEO M6 AND NXAMP TDCONTROLLERS ............................................................................. 10

NXAMP connectors ........................................................................................................ 10 3.1.1

GEO M6 and NXAMP4x1 recommended loading ........................................................... 10 3.1.2

4 GEO M6 SETUPS ON NEXO TD CONTROLLERS ................................................................... 11

4.1 NXAMP TDCONTROLLERS .................................................................................................. 11

5 CONNECTION DIAGRAMS ...................................................................................................... 12

5.1 6 X GEO M620 STEREO – 2 X LS18 MONO ON NXAMP4X1 ................................................... 12

5.2 12 X GEO M620 ON NXAMP4X1 ......................................................................................... 13

5.3 3 X GEO M620 STEREO – 3 X GEO M6B STEREO - 2 X LS18 MONO ON NXAMP4X1 ............... 14

5.4 6 X GEO M620 STEREO – 6X GEO M6B STEREO ON NXAMP4X1 .......................................... 15

6 NS-1 SIMULATION SOFTWARE .............................................................................................. 16

7 CONFIGURABLE DIRECTIVITY DEVICE ................................................................................. 17

7.1 INSTALLING & REMOVING GEO’S CONFIGURABLE DIRECTIVITY FLANGES ................................. 17

7.2 WHEN & WHERE TO USE CONFIGURABLE DIRECTIVITY FLANGES ............................................. 18

8 GEO M6 HARDWARE SETUP PROCEDURE .......................................................................... 19

8.1 SAFETY FIRST .................................................................................................................. 19

Flown Systems Safety .................................................................................................... 19 8.1.1

Ground Stacking Safety ................................................................................................. 20 8.1.2

Contacts ......................................................................................................................... 21 8.1.3

8.2 GENERAL DESCRIPTION ....................................................................................................... 22

GEO M6 modules rigging system ................................................................................... 22 8.2.1

GEO M6 “Left” and “Right” configuration ........................................................................ 22 8.2.2

GEO M6 Angle Setting Bar configuration ....................................................................... 23 8.2.3

Accessories and kits....................................................................................................... 24 8.2.4

Described configurations ................................................................................................ 25 8.2.5

WARNINGS ON GEO M6 ACCESSORIES .................................................................... 26 8.2.6

8.3 INSTALLING GEO M6 ........................................................................................................... 26

1 to 3 (maximum) GEO M6 wall mounted ....................................................................... 27 8.3.1

1 to 3 (maximum) Geo M6 ceiling mounted .................................................................... 28 8.3.2

4 to 12 (maximum) GEO M6 ceiling mounted ................................................................. 29

8.3.3

1 to 3 (maximum) GEO M6 pole mounted ...................................................................... 30 8.3.4

1 to 3 GEO (maximum) M6 truss or cable mounted ........................................................ 32 8.3.5

1 to 6 (maximum) GEO M6 stacked on Sub ................................................................... 33 8.3.6

4 to 12 (maximum) GEO M6 flown ................................................................................. 34 8.3.7

8.4 TESTING AND MAINTENANCE OF THE SYSTEM ........................................................................ 37

CONTENTS Page 7/62

9 SYSTEM ALIGNMENT GUIDELINES ........................................................................................ 38

9.1 GEO M6 VERTICAL CLUSTER DESIGN ................................................................................... 38

9.2 STACKED LS18S AND FLOWN GEO M6 ................................................................................. 38

9.3 DRIVING THE LS18S FROM THE AUX SEND ............................................................................ 39

9.4 RECOMMENDED INSTALLATION TOOLS AND EQUIPMENT .......................................................... 39

10 GEO M6 – LS18S SYSTEM CHECK LIST ................................................................................. 41

10.1 ARE THE SPEAKERS PROPERLY CONNECTED AND ANGLED ? .................................................... 41

10.2 FINAL PRE-SOUND CHECK CHECK ........................................................................................ 41

11 TECHNICAL SPECIFICATIONS ................................................................................................ 42

11.1 LS18 SUBWOOFER............................................................................................................... 42

System specifications ................................................................................................. 42 11.1.1

Dimensions ................................................................................................................. 43 11.1.2

11.2 GEO M620 MODULE ............................................................................................................ 44

System specifications ................................................................................................. 44 11.2.1

Dimensions ................................................................................................................. 45 11.2.2

11.3 GEO M6BASS MODULE ........................................................................................................ 46

System specifications ................................................................................................. 46 11.3.1

Dimensions ................................................................................................................. 47 11.3.2

11.4 GEO M6 ACCESSORIES ....................................................................................................... 48

GMT-BUMPER ........................................................................................................... 48 11.4.1

GMT-EXBAR .............................................................................................................. 49 11.4.2

GMT-BPDAPT ............................................................................................................ 50 11.4.3

GMT-LBUMPER ......................................................................................................... 51 11.4.4

GMT-LBPADPT .......................................................................................................... 52 11.4.5

VNT-POLE .................................................................................................................. 53 11.4.1

VNT-XHBRK ............................................................................................................... 54 11.4.2

VNT-TCBRK ............................................................................................................... 55 11.4.3

GMT-IPCOV ............................................................................................................... 56 11.4.1

VXT-BL515 PUSH PINS ............................................................................................. 57 11.4.2

GMT-BNFIX ................................................................................................................ 57 11.4.3

VNI-WS15 ................................................................................................................... 58 11.4.4

GMT-6CASE ............................................................................................................... 59 11.4.5

12 GEO M6 SERIES PARTS & ACCESSORIES LIST ................................................................... 60

12.1 MODULES & CONTROL ELECTRONICS LIST ............................................................................. 60

12.2 ACCESSORIES LIST .............................................................................................................. 60

13 USER NOTES ............................................................................................................................ 62

Page 8/62 INTRODUCTION

1 INTRODUCTION

Thank you for selecting a NEXO GEO M6 Series Tangent Array System.

This manual is intended to provide you with necessary and useful information about your GEO M6

System, which includes the following products:

 GEO M620 is a 20° Tangent Array Module. It

comprises 1x6.5” (17cm) 8 ohms LF/MF driver and

1x1.5” voice coil, 1” Throat 16 Ohm HF Driver loaded

by a 15° Hyperboloid Reflective Wavesource™.

 GEO M6B is a Bass-Mid Reinforcement module for

Geo M620. It comprises 1x6.5” (17cm) 8 ohms LF/MF

driver ™.

 GEO M6 Accessory Range. a full range of

accessories that provides safe, flexible and simple

means of installing Geo M6 as single or multiple units

in fixed installation as well as in touring applications.

 GEO M6 modules are controlled, powered and

monitored by NXAMP4x1.For a complete description

of this controller, please refer to User Manual.

NXAMP DSP algorithms and parameters are fixed in

software and updated regularly: Please consult the

NEXO web site (www.nexo-sa.com) for the latest

software releases.

 NS-1 simulation software assists in the design and

implementation of vertical tangent GEO arrays.

Please consult the NEXO web site (www.nexo-

sa.com) for the latest software releases.

 Available for iPad and iPhone, NEXO NeMo provides

remote control over an NXAMP network from

anywhere in the venue, thanks to an intuitive and

graphically attractive user interface. NeMo is available

on iTunes.

Please devote your time and attention to reading this manual. A comprehensive understanding of GEO

theory, tangent arrays and specific features of GEO M6 will help you to operate your system at its full

potential.

GEO M6 GENERAL SET-UP INSTRUCTIONS Page 9/62

2 GEO M6 GENERAL SET-UP INSTRUCTIONS

2.1 Speaker connection

GEO M620 and M6B are connected with Speakon NL4FC plugs (not supplied). The 4 pins of the 2

Speakon sockets identified in / out are connected in parallel within the enclosure.

Either connector can be used to connect to NXAMP or to link to an additional Geo M6 cabinet.

Therefore, a single 4-conductor cable can connect two NXAMP channels to various Geo M620 and

M6B.

GEO M620 connectors 2.1.1

Connectors are wired as follows:

GEO M6Bass connectors 2.1.2

Connectors are wired as follows:

Cabling 2.1.3

IMPORTANT

Long speaker cables induce capacitive effects – up to hundreds of pF depending on the

quality of the cable - with a low-pass effect on high frequencies. If long speaker cables

must be used, ensure that they do not remain coiled while in use.

Speakon Connector

M620

1(-)



Through

1(+)



Through

2(-)



Geo M620 (-)

2(+)



Geo M620 (+)

Speakon Connector

M620

1(-)



Geo M6Bass (-)

1(+)



Geo M6Bass (+)

2(-)



Through

2(+)



Through

Page 10/62 AMPLIFIER SELECTION FOR USE WITH GEO M6 & LS18

3 AMPLIFIER SELECTION FOR USE WITH GEO M6 & LS18

3.1 GEO M6 and NXAMP TDControllers

NEXO Powered TDControllers NXAMP 4X1 is an integrated solution for Control and amplification for all

NEXO speaker ranges.

NXAMP4x1 power capability is listed in the table below:

Mode

4 Channels

Bridge Stereo

NXAMP4x1

4 x 600 Watts / 8 Ohms

4 x 900 Watts / 4 Ohms

4 x 1300 Watts / 2 Ohms

2 x 1800 Watts / 8 Ohms

2 x 2600 Watts / 4 Ohms

NXAMP connectors 3.1.1

NXAMP4x1 rear panels features:

- 4 analog inputs / outputs (links) on XLR3 connectors;

- 4 digital inputs / outputs on RJ45 connectors with a slot for optional NX-ES104 (EthersoundTM) or NX-

DT104 (DanteTM) cards;

- 4 speaker level outputs on NL4FC connectors.

Figure below shows connectors implementation on the rear panel.

GEO M6 and NXAMP4x1 recommended loading 3.1.2

Passive Mode

3 x GEO M620

1 channel of NXAMP4x1 in 4 channels mode

3 x GEO M6Bass

1 channel of NXAMP4x1 in 4 channels mode

GEO M6 SETUPS ON NEXO TD CONTROLLERS Page 11/62

4 GEO M6 SETUPS ON NEXO TD CONTROLLERS

4.1 NXAMP TDControllers

As of this manual printing date, load 3.22 features the setups listed in below table in the “NEXO

configurations” menu.

NEXO recommended setups

CH1

CH2

CH3

CH4

'M620-LS18 120Hz'

'1-3 Boxes'

LS18 (bridged with CH2)

N/A

M620

'M620-LS18 120Hz'

'4-12 Boxes'

LS18 (bridged with CH2)

N/A

M620

'M620-70Hz'

'4 Ch. 1-3 Boxes'

M620

'M620-70Hz'

'4 Ch. 4-12 Boxes'

M620

'M620-120Hz'

'4 Ch. 1-3 Boxes'

M620

'M620-120Hz'

'4 Ch. 4-12 Boxes'

M620

- Setups “1-3 Boxes” are to be used in small configuration (pole stand, lip fill, under-balcony);

- Setups “4-12 Boxes” are to be used in larger arrays – typically flown;

- Frequency value is high-pass filter cut-off point.

Additionally, “Custom configurations menu” allows to build any combination of NEXO speakers –

including GEO M6Bass with:

- Full phase compatibility from 20 Hz to 20kHz.

- Choice between 85 Hz and 120 Hz X-over point between Nexo LS or RS subwoofers and Geo M6.

NEXO Custom setups

M620 4-12 BOXES 70Hz-20kHz

M620 4-12 BOXES 85Hz-20kHz

M620 4-12 BOXES 120Hz-20kHz

M620 1-3 BOXES 70Hz-20kHz

M620 1-3 BOXES 85Hz-20kHz

M620 1-3 BOXES 120Hz-20kHz

M6B 70Hz-180Hz

M6B 85Hz-180Hz

Please consult www.nexo-sa.com for upgrade releases.

Page 12/62 CONNECTION DIAGRAMS

5 CONNECTION DIAGRAMS

5.1 6 x GEO M620 stereo – 2 x LS18 mono on NXAMP4x1

Channels 1 & 2 are bridge mono for 2xLS18, channel 3 & 4 drive 3 GEO M620 each

CONNECTION DIAGRAMS Page 13/62

5.2 12 x GEO M620 on NXAMP4x1

Each NXAMP4x1 channel drives 3 GEO M620

Page 14/62 CONNECTION DIAGRAMS

5.3 3 x GEO M620 stereo – 3 x GEO M6B stereo - 2 x LS18 mono on NXAMP4x1

Channels 1 & 2 are bridge mono for 2xLS18, channel 3 drives 3xGEO M6Bass, channel 4 drives 3x

GEO M620.

CONNECTION DIAGRAMS Page 15/62

5.4 6 x GEO M620 stereo – 6x GEO M6B stereo on NXAMP4x1

Channels 1 & 3 drive 3xGEO M6Bass each, channels 2&4 drive 3xGEO M620 each.

Page 16/62 NS-1 SIMULATION SOFTWARE

6 NS-1 SIMULATION SOFTWARE

NS-1 software is a R&D simulation tool derived application. It processes measured speaker data with

complex mathematical algorithms to assist the user in optimizing system design. Due to the complexity

of the interaction of multiple cabinets, it is simply not possible to reliably design curved vertical arrays

without using the processing power of a computer to predict the optimum array structure for a given

audience geometry. The design logic is far more complex than looking at a section drawing of the

venue, measuring the overall angle needed to cover the audience from the cluster location, and dividing

by 20 degrees to determine the required amount number of GEO M620 cabinets.

NS-1 is an easy to use tool that allows to shape the energy leaving the cluster to fit the audience. It

predicts pressure levels radiated from the system to ensure enough cabinets are provided for the

application, as well as mechanical constraints for safe flown systems.

In addition, it provides mechanical information for all clusters in agreement with Structural Analysis

Reports (available in the Help section): dimensions, weight, gravity center position, forces, moments,

working load and safety factor.

NS-1 installation package includes all NEXO User Manuals, Structural Analysis Reports and Certificates

PDF files (which can be found in the last section of User Manuals).

NS-1 is a freeware available on www.nexo-sa.com

IMPORTANT

Never install a GEO M6 cluster without checking its acoustical performances and

mechanical safety in NS-1 prior to installation.

Any question or bug report please contact techn[email protected]

NS-1 GEO M6 ACOUSTIC PAGE

CONFIGURABLE DIRECTIVITY DEVICE Page 17/62

7 CONFIGURABLE DIRECTIVITY DEVICE

The GEO Wavesource controls dispersion of acoustic energy using an hyperboloid acoustical reflector

in the vertical plane and a diffraction slot in the horizontal plane. The patented Configurable Directivity

Device consists of bolt-on flanges that alter the diffraction slot’s exit flare rate thus increasing the

horizontal coverage from 80° to 120°.

7.1 Installing & removing GEO’s Configurable Directivity flanges

GEO M620 are shipped in the 80° dispersion configuration;

120° flanges is an optional accessory.

To change dispersion in the non-coupling plane to 120°:

- Remove the front grill (TORX15, drawings below);

- Remove the 2 TORX screws per flange on each side of the GEO Waveguide (drawings below);

- Install the 120° flanges with the 2 TORX screws

- Re-install the grid, being careful that the NEXO logo must be on the woofer side.

REMOVING THE GRILL ADDING THE 120° FLANGES

Page 18/62 CONFIGURABLE DIRECTIVITY DEVICE

7.2 When & where to use Configurable Directivity flanges

The diagrams show audience area coverage for a stereo system. While a GEO cluster will deliver even

SPL from the front to the rear of this audience area, there are “holes” near the front in the centre and at

the outside edges. We cannot fill the outside coverage gaps without enlarging the centre gap, and vice

versa (left figure below).

If 120° Configurable Directivity Devices are installed at the bottom cabinet of the clusters, coverage will

look more like the pattern in right figure below.

-6dB coverage, all GEO M620 in 80° configuration

-6dB coverage, bottom GEO M620 in 120° configuration

In curved vertical arrays, the 120° Configurable Directivity Device can be used:

- On the bottom row of curved vertical arrays, to fill in coverage gaps in the front rows.

- On all rows of curved vertical arrays, in cases where 120° of horizontal coverage is preferred to 80°.

GEO M6 HARDWARE SETUP PROCEDURE Page 19/62

8 GEO M6 HARDWARE SETUP PROCEDURE

Before proceeding with assembly of GEO M6 arrays, please ensure that the components are present

and undamaged. A component list is appended to this manual. In the event of any shortage, please

contact your supplier.

For maximum efficiency the GEO M6 rigging system requires three experienced persons for set-up:

typically one motor hoist operator, and one operator per side of the array. Good synchronisation and

crosscheck between the operators are key elements for a reliable and safe set-up.

8.1 SAFETY FIRST

GEO M6 Rigging System structural computations and related documents are available in NS-1 or at

NEXO ([email protected]) upon request.

We include this section to remind you of safe practice when flying the GEO M6 system. Please read it

carefully. However, user must always apply his or her knowledge, experience and common sense. If in

any doubt, seek advice from your supplier or NEXO agent.

This manual offers guidance only for GEO M6 loudspeaker systems. References in this manual to other

rigging equipment such as motor hoists, steels, shackles etc. are made to clarify the description of

rigging procedures. The user must ensure that operators are properly trained by other agencies in the

use of these items.

The GEO M6 Rigging System has been optimised for the deployment of curved vertical or horizontal

tangent arrays of GEO M6 loudspeakers. Angle adjustment between cabinets has been limited to

specific settings to ensure correct acoustic coupling.

The GEO M6 Rigging System is a professional precision tool set, and should be handled with extreme

care. Only persons who are fully conversant with the operation of the GEO M6 Rigging System and

provided with suitable safety equipment should deploy GEO Arrays. Misuse of the GEO M6 Rigging

System could lead to dangerous consequences.

Used and maintained correctly, the GEO M6 Rigging System will give many years of reliable service in

portable systems. Please take the time to read and understand this manual. Always use NS-1 to

determine the optimum angle settings for a particular venue, hang point and curved vertical GEO M6

cluster. Applied forces and moments are strongly cabinet quantity and angle configuration dependent.

Cluster configuration must be implemented and validated in NS-1 prior to installation.

Flown Systems Safety 8.1.1

Always inspect all the rigging components and cabinets for damage before assembly. Pay special

attention to the lifting points, and safety clips. If you suspect that any of the components are damaged

or defective, DO NOT USE THE AFFECTED PARTS. Contact your supplier for replacements.

Read this manual carefully. Also be familiar with the manuals and safe working procedures for any

ancillary equipment that will be used with the GEO M6 Rigging System.

Applied forces and moments are strongly cabinet quantity and angle configuration dependent. Cluster

configuration must be implemented and validated in NS-1 prior to installation.

Ensure that all local and National regulations regarding the safety and operation of flying equipment are

understood and adhered to. Information on these regulations can usually be obtained from Local

Government Offices.

When deploying a GEO M6 system always wear protective headwear, footwear and eye protection.

Do not allow inexperienced persons to handle a GEO M6 system. Installation personnel should be

trained in loudspeaker flying techniques and should be fully conversant with this manual.

Page 20/62 GEO M6 HARDWARE SETUP PROCEDURE

Ensure that motor hoists, hoist control systems and ancillary rigging components are currently certified

as safe and that they pass a visual inspection prior to use.

Ensure that public and personnel are not allowed to pass beneath the system during the installation

process. The work area should be isolated from public access.

Never leave the system unattended during the installation process.

Do not place any object, no matter how small or light, on top of the system during the installation

procedure. The object may fall when the system is flown and is likely to cause injury.

Secondary safety steels must be installed once the system has been flown to the operating height.

Secondary steels must be fitted irrespective of requirements of the local safety standards applicable to

the territory.

Ensure that the system is secure and prevented from pivoting around the motor hoist.

Avoid any form of excessive dynamic loading to the assembly (structural computations on GEO M6

Rigging System are based on a 1/1.2 factor for hoist or motor acceleration).

NEVER attach any item to the GEO M6 system other than the GEO M6 accessories.

When flying outdoor systems, ensure that the system is not exposed to excessive wind or snow loads

and is protected from rainfall.

If wind velocity reaches or exceeds Beaufort 7 (60 km/h – 38 mp/h), the system must be landed.

The GEO M6 Rigging System requires regular inspection and testing by a competent test centre. NEXO

recommend that the system is load tested and certified annually or more frequently if local regulations

require.

When de-rigging the system ensure that the same duty of care is given to the procedure as for the

installation. Pack GEO M6 components carefully to prevent damage in transit.

Ground Stacking Safety 8.1.2

Statistically, many more injuries occur due to unstable ground stacked PA systems than those

associated with flown systems. There are several reasons for this fact, however the message is clear:

Always survey the supporting structure upon which a ground stack is to be built. Always look beneath

PA wings to inspect the deck support and if necessary ask for the stage scrims and dressings be

removed to allow access.

If the stage surface slopes, as it does in some theatres, ensure that the system is prevented from sliding

forwards due to vibration. This may require the fitting of timber battens to the stage floor.

For outdoor systems ensure that that the system is protected from wind forces which might cause the

ground stack to become unstable. Wind forces can be huge, especially upon large systems, and should

never be underestimated. Observe meteorological forecasts, calculate the “worst case” effect upon the

system prior to erection and ensure that the system is secured appropriately.

Take care when stacking cabinets. Always employ safe lifting procedures and never attempt to build

stacks without sufficient personnel and equipment.

Never allow anyone, whether operators, artists or members of the public to climb onto a ground stacked

PA system. Anyone who needs to climb over 2m (6 ft) high should be fitted with suitable safely

equipment including a clip-on harness. Please refer to local Health and Safety legislation in your

territory. Your dealer can help with advice on access to this information.

Apply the same attention to all safety matters when de-stacking systems.

Be aware that safety procedures are as important in the truck and in the warehouse as they are at the

venue.

La page est en cours de chargement...

Yamaha Geo M620 Manuel utilisateur

Ce manuel convient également à

Yamaha Geo M620 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents