Honeywell TH1100D Manuel utilisateur

Série PRO 1000 Series

Non-Programmable Thermostats

Thermostat non programmables

Termostatos no programables

Operating Manual

Mode d’emploi

Manual de Uso

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page 1 Tuesday, September 8, 2009 10:31 AM

This is a legacy product document

supported by Resideo. It is no

longer manufactured

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page 2 Tuesday, September 8, 2009 10:31 AM

ENGLISH

PRO 1000 Series

This manual covers the following models:

TH1100D: For 1-Heat systems

TH1110D: For 1-Heat / 1-Cool systems

TH1210D

: For 2-Heat / 1-Cool heat pump systems

(Remove the thermostat from its wallplate to find the model number.)

Need Help?

For assistance with this product please visit http://yourhome.honeywell.com

or call Honeywell Customer Care toll-free at 1-800-468-1502.

Read and save these instructions.

® U.S. Registered Trademark. Patents pending.

CAUTION: EQUIPMENT DAMAGE HAZARD.

To prevent possible compressor damage, do not use Cooling mode when the

outdoor temperature is below 50 °F (10 °C).

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page -1 Tuesday, September 8, 2009 10:31 AM

Operating Manual

ENGLISH

Overview

Thermostat features ............................. 1

Quick reference to controls .................. 2

Quick reference to display.................... 3

Operation

System switch (Heat/Cool) ................... 4

Fan switch (Auto/On)............................ 5

Temperature controls............................ 6

Compressor protection ......................... 7

Appendices

Battery replacement ............................. 8

In case of difficulty................................ 9

Customer assistance.......................... 10

2-year limited warranty ........................11

Table of contents

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page 0 Tuesday, September 8, 2009 10:31 AM

PRO 1000 Series

1

ENGLISH

Your new Honeywell thermostat has been designed to give you many years of

reliable service and easy-to-use, push-button climate control.

Features

• Backlit display is easy to read

• Displays ambient (measured) temperature at all times

• One-touch access to setpoint temperature

• Built-in compressor protection

About your new thermostat

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page 1 Tuesday, September 8, 2009 10:31 AM

Operating Manual

2

ENGLISH

Quick reference to controls

System switch (see page 4)

•Cool: System is in Cooling mode.

•Off: System is off.

•Heat: System is in Heating mode.

•Em Heat: System is in Emergency Heat mode.

Fan Switch (see page 5)

•On: Fan runs continuously.

•Auto: Fan runs only when

heating or cooling is taking place.

Press to adjust temperature

Screen

Lit for 12 seconds when you press any button.

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page 2 Tuesday, September 8, 2009 10:31 AM

PRO 1000 Series

3

ENGLISH

Quick reference to display

* If Heat On or Cool On is flashing, compressor protection is engaged (see page 7).

** Applies to TH1210D model only.

Temperature display

The ambient (measured)

temperature is normally

displayed. To view the

setpoint temperature, press

either of the temperature

adjustment buttons once.

The setpoint temperature

will appear for five seconds.

System Status

• Cool On: Cooling is activated. *

• Heat On: Heating is activated. *

• Aux On: Auxiliary heat is activated. **

Low-battery warning

(see page 8)

Setpoint indicator

Appears when the setpoint

temperature is displayed.

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page 3 Tuesday, September 8, 2009 10:31 AM

Operating Manual

4

ENGLISH

System switch

Use the System switch to place the system in one of the following

modes.

•Cool: System is in Cooling mode. (This mode is not available on

the TH1100D model.)

•Off: System is off.

•Heat: System is in Heating mode.

•Em Heat: System is in Emergency Heat mode. Only auxiliary

heating can be activated. The compressor is disabled. (This

mode is available on the TH1210D model only.)

CAUTION: EQUIPMENT DAMAGE HAZARD

Do not use Cooling mode when the outdoor temperature is below 50 °F (10 °C).

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page 4 Tuesday, September 8, 2009 10:31 AM

PRO 1000 Series

5

ENGLISH

Fan switch (select models)

Use the Fan switch to select the fan operation.

•Auto: The fan runs only when heating or cooling is actually

taking place (commonly used setting).

•On: The fan runs continuously.

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page 5 Tuesday, September 8, 2009 10:31 AM

Operating Manual

6

ENGLISH

Temperature controls

Press the or button

once to display the setpoint

temperature. Press either

button more than once to

change the setpoint.

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page 6 Tuesday, September 8, 2009 10:31 AM

PRO 1000 Series

7

ENGLISH

Your thermostat has a feature that helps prevent damage to the compressor of

your air conditioning or heat pump system. Because damage can occur if the

compressor is restarted too soon after shutdown, this feature forces the

compressor to wait 5 minutes before restarting. During the wait time, the message

Cool On or Heat On flashes on the screen. When the safe wait time has elapsed,

the message stops flashing and the compressor turns on.

Built-in compressor protection (select models)

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page 7 Tuesday, September 8, 2009 10:31 AM

Operating Manual

8

ENGLISH

NOTE: Batteries are optional (and serve as backup power) only if your

thermostat is connected to 24 VAC.

Install two fresh AAA batteries when Lo Batt (low batteries) flashes on

the screen. The message appears for 60 days before the batteries are

depleted.

Replace batteries once a year, or when you will be away for more than

a month.

The settings are stored in non-volatile (permanent) memory and are

thus preserved when the thermostat is without AC power or batteries.

NOTE: The low-battery icon will not appear when the batteries are depleted

if the thermostat is connected to 24 VAC.

Battery replacement

Set the System switch to Off before removing the batteries.

Otherwise, the heating/cooling system could remain activated

even when batteries are removed.

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page 8 Tuesday, September 8, 2009 10:31 AM

PRO 1000 Series

9

ENGLISH

In case of difficulty

Screen is blank. • Check circuit breaker and reset if necessary.

• Ensure the heating/cooling system is powered up.

• Ensure the furnace door is properly closed.

• Ensure two fresh AAA alkaline batteries are correctly installed.

Temperature settings cannot be

changed.

•The System switch is off.

• You are setting the temperatures outside their allowable ranges:

• Heat: 40 °F to 90 °F (4.5 °C to 32 °C).

• Cool: 50 °F to 99 °F (10 °C to 37 °C).

Cool On or Heat On is flashing. • The compressor protection delay has been activated. Wait for the

delay to end (maximum of 5 minutes).

HI appears on the screen. • The ambient (measured) temperature is above 122 °F (50 °C).

LO appears on the screen. • The ambient (measured) temperature is below 32 °F (0 °C).

E1 appears on the screen. • The temperature sensor circuit is opened. Replace the thermostat.

E2 appears on the screen. • The temperature sensor circuit is shorted. Replace the thermostat.

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page 9 Tuesday, September 8, 2009 10:31 AM

Operating Manual

10

ENGLISH

Customer assistance

For assistance with this product, please visit

http://yourhome.honeywell.com.

Or call Honeywell Customer Care toll-free at

1-800-468-1502.

To save time, please note your model number and

date code before calling.

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page 10 Tuesday, September 8, 2009 10:31 AM

PRO 1000 Series

11

ENGLISH

Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or

materials, under normal use and service, for a period of two (2) years from the date of purchase by the

consumer. If at any time during the warranty period the product is determined to be defective or

malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).

If the product is defective,

(i) return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased

it; or

(ii) call Honeywell Customer Care at 1-800-468-1502. Customer Care will make the determination

whether the product should be returned to the following address: Honeywell Return Goods, Dock 4

MN10-3860, 1885 Douglas Dr. N., Golden Valley, MN 55422, or whether a replacement product can

be sent to you.

This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by

Honeywell that the defect or malfunction was caused by damage which occurred while the product was in

the possession of a consumer.

2-year limited warranty

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page 11 Tuesday, September 8, 2009 10:31 AM

Operating Manual

12

ENGLISH

Honeywell’s sole responsibility shall be to repair or replace the product within the terms stated above.

HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY

INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM

ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS

PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages,

so this limitation may not apply to you.

THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT.

THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE

TWO-YEAR DURATION OF THIS WARRANTY.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may

not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary

from state to state.

If you have any questions concerning this warranty, please write Honeywell Customer Relations, 1985

Douglas Dr, Golden Valley, MN 55422 or call 1-800-468-1502. In Canada, write Retail Products

ON15-02H, Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9.

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page 12 Tuesday, September 8, 2009 10:31 AM

FRANÇAIS

Série PRO 1000

Le présent mode d’emploi porte sur les modèles suivants :

TH1100D : Pour systèmes à 1 étage de chauffage

TH1110D : Pour systèmes à 1 étage de chauffage / 1 étage de refroidissement

TH1210D

: Pour thermopompes à 2 étages de chauffage / 1 étage de refroidissement

(Retirer le thermostat de la plaque murale pour trouver le numéro de modèle.)

Besoin d’aide?

Pour obtenir de l’aide sur ce produit, veuillez consulter le http://yourhome.honeywell.com

ou joindre le service à la clientèle en composant sans frais le 1-800-468-1502.

Veuillez lire le mode d’emploi et le conserver en lieu sûr.

® Marque de commerce enregistrée aux États-Unis. Brevets en instance.

MISE EN GARDE : RISQUE DE DOMMAGE MATÉRIEL

Pour éviter des dommages au compresseur, ne pas utiliser le mode

Refroidissement lorsque la température extérieure est inférieure à 10 °C (50 °F).

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page -1 Tuesday, September 8, 2009 10:31 AM

Mode d’emploi

FRANÇAIS

Aperçu

Caractéristiques du thermostat ............ 1

Coup d’œil rapide sur les contrôles...... 2

Coup d’œil rapide sur l’affichage.......... 3

Programmation et fonctionnement

Sélecteur du système (Heat/Cool) ....... 4

Sélecteur du ventilateur (Auto/On) ....... 5

Réglage de la température................... 6

Protection du compresseur .................. 7

Annexes

Remplacement des piles ...................... 8

En cas de difficulté ............................... 9

Service à la clientèle .......................... 10

Garantie limitée de 2 ans ....................11

Table des matières

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page 0 Tuesday, September 8, 2009 10:31 AM

Série PRO 1000

1

FRANÇAIS

Votre nouveau thermostat Honeywell a été conçu pour vous procurer de

nombreuses années de service fiable et assurer la régulation de la température

ambiante avec facilité, par simple bouton-poussoir.

Caractéristiques

• Affichage rétroéclairé facile à lire

• Affiche la température ambiante (mesurée) en tout temps

• Une seule touche permet de voir la température de consigne

• Protection intégrée du compresseur

À propos du thermostat

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page 1 Tuesday, September 8, 2009 10:31 AM

Mode d’emploi

2

FRANÇAIS

Coup d’œil rapide sur les contrôles

Bouton-sélecteur du système (voir la page 4)

•Cool : Le système est en mode Refroidissement.

•Off : Le système est arrêté.

•Heat : Le système est en mode Chauffage.

•

Em Heat

: Le système est en mode Chauffage d’urgence.

Bouton-sélecteur du ventilateur (voir la page 5)

•On : Le ventilateur fonctionne sans arrêt.

•Auto : Le ventilateur fonctionne uniquement

lorsque le chauffage ou la climatisation est activée.

Réglage de la température

Écran

S’illumine pendant 12 secondes quand on appuie sur un bouton

400-626-002-D (69-1971EFS-04 non-prog TH1110D_TH1210D user manual) USA.book Page 2 Tuesday, September 8, 2009 10:31 AM

La page charge ...

Honeywell TH1100D Manuel utilisateur

Ce manuel convient également à

Honeywell TH1100D Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents