iON DashCam Guide de démarrage rapide



Quick Start Guide

DashCam

IN-CAR CAMERA



EN-2

Quick Start Guide

DashCam

IN-CAR CAMERA

EN-3

1. Key Features

y Car DashCam with 135

o

Wide Angle Lens.

y 2.7" Color LCD for real-time monitoring and video playback.

y Automatic Event Video Recording for sudden external impact.

y Continuous loop recording of scenery capture for unexpected incidents.

y Geo-information capture in photo or video files with the built-in GPS sensor.

y High quality video recording up to 1296p high quality videos in extreme low light environment.

y Photo capture during recording.

EN-4

2. Package Contents

1 USB Cable 2 5M Power Cable

3 USB Car Adapter 4 Windshield Mount

5 Sensormatic Tag 6 DashCam Software CD

7 Warranty Card 8 QSG

9 iON label

EN-5

3. Functional Parts



1 DC in Port Connect to the provided DC in to USB cable for charging.

2 Mini HDMI Port Connect to the TV through mini HDMI cable (not supplied).

3 Micro USB Port Connect to PC for file browsing and file transfer.

EN-6

4 Wide Angle Lens Capture a wide angle view.

5

1. Select the top-left on-screen command.

2. Enter the playback mode.

3. Move up the selection bar or move to former file.

6

1. Select the bottom-left on-screen command.

2. Move down the selection bar or move to next file.

3. Take a photo.

7 LED Indicator Operation status indication.

8

1. Confirm your selection.

2. Manually trigger an Event Protection Video Recording.

3. Select the bottom-right on-screen command.

9

1. Turn on or off the DashCam by pressing and holding the button.

2. Select the top-right on-screen command.

3. Enter the setup menu.

4. Go back to previous interface.

10 Display Sharp panel for live view, playback and function indications.

11 MicroSD Slot MicroSD card storage location.

12 Reset Button Reset the DashCam.

13 Speaker Vent Output the sound.

EN-7

4. Installing the Windshield Mount & DashCam in a

Vehicle

1. Clean the area on the windshield.

2. Peel off the protective membrane of the 3M adhesive and stick the Windshield Mount to the front windshield inside

the car.

3. Slip the socket on the top of the DashCam into Windshield Mount until it is latched.

4. The lens of DashCam should be at the center of the front windshield and be aware not to block the driver’s visibility.

EN-8

5.Adjust the nut on the Windshield Mount for suitable direction and orientation.

EN-9

6. Connect the DashCam to the DC Power jack with included DC in to USB cable and the Dual USB CLA.

Secure the cable with the cable holder to avoid interference of driver's motion.



EN-10



Press the Windshield Mount side to release and slide the DashCam off the mount.

EN-11



5. LED and Sound Indication



Red LED

DashCam is under Normal Loop Recording

2 chimes sound indicates the recording starts

Red LED flashes continuously

Counting down to DashCam shut down due to the power source being removed.

Periodic sound indicates the counting down status

Purple LED

DashCam is under Event Protection Recording

1 chime sound indicates the recording starts

EN-12

Blue LED DashCam is not recording but other status (e.g. setting or playback)

6. Explanation of Status Icons



Item Function Description

1 Playback Indicator

Enter playback mode.

(Normal Loop Recording only.)

2 Screenshot Indicator Capture and save a screenshot of the video.

EN-13

3 Mode Selected

Normal Loop Recording mode.

Event Protection Recording mode.

4 Video Resolution

Show the selected video resolution setting.

1296p (2304x1296 P30)

1080p ( 1920x1080 P30)

720p (1280x720 P30)

5 Microphone Status

Show the Microphone if it is on.

(Icon hidden if the Microphone is “off”.)

6 GPS Strength

Show the intensity of GPS signal.

No GPS reception

Weak GPS reception

Fair GPS reception

Strong GPS reception

7 Photo Counter Shows the number of photos that have been taken.

8 Total Photo Counter Shows the maximum number of photos that can be taken.

9

Event Protection Video

Counter

Show the number of Event Protection Videos that have been recorded.

10

Total Event Protection Video

Counter

Show the maximum number of Event Protection Videos that can be

taken.

EN-14

11 System Time Show current system time in Hour and Minute.

12 Power Status

An external power supply is connected.

External power supply not connected.

13 Event Protection Indicator

Start Event Protection Recording.

Stop Event Protection Recording.

14 Setup Indicator

Enter the Setup menu.

(Normal Loop Recording only.)

15 Compass Indicator

Show the direction going ahead.

(Icon hidden if no GPS signal is received.)

7. Using Your Car DashCam

7.1 Inserting a MicroSD Memory Card (required but not included)

Insert a MicroSD card (not included) to the slot before using the DashCam. Assure that the DashCam power is turned

OFF before inserting the card. Make sure a MicroSD card with minimum 8GB free space has been installed into the card

slot. A 32GB or above Class 6 card is recommended for recording features.

EN-15

Notes:

1. The correct direction should be followed to insert the MicroSD card into the slot.

2. A new MicroSD card should be formatted before using. For more information, refer to section 7.6.

7.2 Turning on/off the DashCam

The DashCam will detect car ignition vibration and automatically turn on and start Normal Loop Recording.. Or, pressing

and hold to turn on the DashCam if a power source is absent.

If the DashCam is turned on for the first time, you will need to set up Date & Time/Language first.

EN-16

In Date & Time setup, if you have set an earlier Date & Time, the below message pops up:



Select “Yes”, all normal recording files will be deleted. Select “No” to keep these files.

7.3 Video Recording and Photo Taking

Normal Loop Recording

The DashCam will start Normal Loop Recording once turned on. Video recording is continuously creating successive files

of 3 / 5 / 10 min. The most outdated file will be replaced if the memory is full for continuous recording.

Event Protection Recording

EN-17

Files will be protected from the auto deletion if an impact is detected. The sensitivity of impact detection can be adjusted

through the setup menu (refer to section 7.6).

By pressing

during normal recording can also enter the Event Protection Recording mode to protect your video files.

You can store up to 10 Event protection videos to the DashCam.

Photo Taking

Press once during recording for taking a photo. You can store up to 500 photos to the DashCam.

7.4 Playing Back Files

During Normal Loop Recording, press to enter the playback mode. You can choose to view the files in specific folders

on separate pages.

EN-18



1 Event Protection Videos

2 Normal Loop Videos

3 Photos

General operation of playback:

EN-19

Press and once to select the folder/file you want to view.

Press

to confirm and enter the thumbnail mode of the selected folder.

Press to open a single Video or Photo file

During the thumbnail mode, long press the

or to switch to previous or next thumbnail page.

Press to start playing back a video, during video playback:

Press to pause and press it again to continue.

Press to fast forward the video and press it again to change the speed.

Press

to fast rewind the video and press it again to change the speed.

Note:

The file currently being recorded will be saved before entering the Playback mode.

7.5 Deleting a Video/Photo File

You can delete a single file (photo or video) from the memory card in single photo or video playback mode.

In single photo or video playback mode, press and hold to enter the single photo or video delete interface.

Press or to select “Yes”;

Press to confirm.

EN-20



7.6 Setup Menu

During Normal Loop Recording, press to enter the setup mode.

Follow the below three steps to enter setup screen for each Menu item:

1. Press or to select the Menu/Submenu item you want to set.

(In “Date/Time set” item, press to increase the number or press to decrease the number.)

2. Press to confirm your selection.

3. Press to return to previous interface.

La page est en cours de chargement...

iON DashCam Guide de démarrage rapide

iON DashCam Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents