Iqua BHS-801 Manuel utilisateur

Catégorie
Casques mobiles
Taper
Manuel utilisateur
Bluetooth
®
Stereo headset
BHS -801
User Guide
BHS-801_Headset_UG_en_2.fm Page -1 Monday, September 25, 2006 2:20 PM
Contents
English ................................................................................................................ 1
Español ............................................................................................................. 15
Deutsch ............................................................................................................. 29
Français ............................................................................................................ 43
Italiano .............................................................................................................. 57
Nederlands ....................................................................................................... 71
Русский ............................................................................................................. 85
Türkçe ............................................................................................................... 99
Ελληνικα ......................................................................................................... 113
BHS-801_Headset_UG_en_2.fm Page 0 Monday, September 25, 2006 2:20 PM
1
EN
General Information
Thank you for purchasing Iqua Bluetooth
®
Wireless Headset BHS-801. Your new device is a
stylish product that enables you to communicate handsfree and comfortably with compatible
mobile phones that support Bluetooth wireless technology.
Overview of the product
1 Power on/off button
2 Indicator light
3 Volume up (+) button
4 Volume down (-) button
5 Call button
6 Earhook
7 Charger connector
1
2
3
4
5
6
7
BHS-801_Headset_UG_en_2.fm Page 1 Monday, September 25, 2006 2:20 PM
2
Sales package contents
1. Headset
2. 2 earhooks (one attached to the headset)
3. Stereo earpiece set
4. Earpiece adapter
5. Wall charger
with mini USB
connector
6. User Guide
7. Quick Guide
8. Carrying case
1
2
3
4
5
6
7
8
BHS-801_Headset_UG_en_2.fm Page 2 Monday, September 25, 2006 2:20 PM
3
EN
Getting Started
Wearing the headset
This headset is designed to comfortably fit your ear when
attached to one of the optional earhooks provided in the
sales package. See pictures on page 2 for reference.
1. To attach the earhook, insert the main body of the
headset into the earhook ring and push until it stops.
2. Place the headset in your ear with the microphone
angled at your mouth. Check that the size of the
earhook fits your ear and try another earhook if
necessary.
3. To remove the earhook, gently pull it away from the
headset.
Charging the battery
Before you use the headset, you must charge its battery for approximately 2 hours. Once the
battery is full, it will provide up to 10 hours of talk time and up to 150 hours of standby time.
1. Connect the charger cable to the connector in the headset.
2. Connect the charger into an electric outlet. A red light will turn on.
3. When the battery is fully charged, the red light will turn off.
BHS-801_Headset_UG_en_2.fm Page 3 Monday, September 25, 2006 2:20 PM
4
Switching on and off
To switch the headset on, press and hold down the button until you hear a beep and a
green light flashes several times.
To switch the headset off, press and hold down the button until you hear a beep and a
red light flashes several times.
Pairing the headset and your mobile phone
Using the headset for the first time
When the headset is powered on for the very first time, it will automatically enter pairing mode.
This is indicated by red and green lights flashing alternately. Follow the steps 2 to 4 below to
pair your mobile phone with the headset.
Using the headset later on
When the headset is powered on, it will automatically reconnect to the phone it was last
connected with. If the connection fails because the phone is not found, the headset will appear
not connected with green light flashing and you should finish pairing manually:
1. After the power has been switched on, press and hold down the Call button until the red
and green lights start flashing alternately.
2. Complete the pairing with your phone. Please refer to the manual of your phone for
details on how to search and pair. When the phone has found the headset, the phone will
show Iqua BHS-801 on its display.
BHS-801_Headset_UG_en_2.fm Page 4 Monday, September 25, 2006 2:20 PM
5
EN
3. To pair with the phone, enter the PIN code for the headset, which is 0000. After pairing,
the headset may try to connect with your phone automatically or you may have to
activate the connection manually from the phone menu.
4. Once pairing has been successfully completed, you will hear a low to high tone and a
green light will start flashing at a long interval. The headset is now ready for you to make
and receive calls. If the pairing has not been completed, you will hear a high to low tone
and the green light will start flashing at a short interval.
To cancel pairing after entering pairing mode, press and hold down the Call button until the
green and red light are no longer flashing.
To reset and clear the headset’s pairing list, switch the headset off and press and hold down
the and buttons for five seconds. You will hear a beep and the red light flashes twice.
For the latest compatibility information, please visit www.iqua.com.
BHS-801_Headset_UG_en_2.fm Page 5 Monday, September 25, 2006 2:20 PM
6
Call Functions
Answering a call
When your mobile phone rings, answer the call by briefly pressing the Call button on the
headset. A green light will start flashing to indicate an active call. You can also turn on the
automatic answering function of your mobile phone to make the headset answer calls
automatically.
Ending a call
To end an active call, press and hold down the Call button.
Rejecting a call
When you are receiving an incoming call that you do not want to answer, press and hold down
the Call button until you hear a beep to reject the call.
Muting and unmuting a call
To mute a call, press and hold down the button for two seconds until you hear two beeps.
To unmute the call, briefly press any of the buttons.
BHS-801_Headset_UG_en_2.fm Page 6 Monday, September 25, 2006 2:20 PM
7
EN
Redialing the last dialed number
To place a call to the last dialed number in stand-by mode, press and hold down the Call button
until you hear a beep.
Voice dialing (when supported by the phone)
To activate the voice dialing feature of your mobile phone:
1. Press and hold down the Call button for two seconds until you hear two beeps.
2. Speak the voice tag of the person you wish to call.
Please refer to your phone’s manual for details as some phone models do not support voice
dialing.
Adjusting the volume
To increase the volume, press the button.
To decrease the volume, press the button.
Transferring call from the headset to your mobile phone
To transfer an ongoing call from the headset to your mobile phone, press and hold down
the button until you hear a beep.
BHS-801_Headset_UG_en_2.fm Page 7 Monday, September 25, 2006 2:20 PM
8
Using the stereo headset
See pictures on page 2 for reference with the following instructions 1 to 3.
1. Remove the earhook from the headset body.
2. Connect the earpiece adapter to the headset body.
3. Connect the stereo earpiece set to the adapter.
4. You can modify the length of the neck strap by sliding the wire stopper up and down. See
fig 1 below.
5. Wear the neck strap around your neck and place the earpieces in your ears.
See fig. 2 below.
Fig 1.
Fig 2.
Movable wire stopper
BHS-801_Headset_UG_en_2.fm Page 8 Monday, September 25, 2006 2:20 PM
9
EN
While listening using the earpiece set, you can do any of the following:
Adjust the volume using and buttons.
Mute streaming by pressing and holding down button.
Unmute streaming by pressing the or button.
Answer, end or reject a call normally, as the streaming automatically stops at an
incoming call and you will start hearing the call through the headset. The streaming will
continue automatically after the call depending on the model of your phone. Please refer
to the manual of your phone for details.
Light indication summary
The headset’s LED can be either red or green. The different signals indicate:
Red light flashing - low battery.
Red light on - battery is charging.
Red light off - charging complete.
Red light flashing several times - power off.
Red light flashing twice, green once - call muted.
Green and red flashing alternately - in pairing mode.
Green light flashing at a low interval - connection active.
Green light flashing at a high interval - not connected.
Green light flashing several times - power on.
Green light flashing twice, red once - phone is ringing.
Green light flashing fragmentally thrice within two seconds - call active.
BHS-801_Headset_UG_en_2.fm Page 9 Monday, September 25, 2006 2:20 PM
10
Product Specifications
Model: BHS-801
Size: 62.5 mm (L) x 25 mm (W) x 13 mm (H)
(with earhook 79x49x17)
Weight: 12 g
(with earhook)
Talk time: Up to 10 hours
Music playing time: 8 hours
Standby time: Up to 150 hours
Charging time: Within 2 hours
Supported Bluetooth profiles: Handsfree 1.0, Headset 1.1, and A2DP 1.0
Bluetooth Compliance: Bluetooth 1.2
Connection: Point-to-point
Paired Devices: Up to 8, one at a time
Battery: Internal rechargeable battery
Operating Temperature: -15ºC to +50ºC
Operating range: Up to 10 meters
Sales Package Contents: Headset, 2 earhooks, stereo earpiece, earpiece
adapter, wall charger, carrying case, user guide, quick
guide
BHS-801_Headset_UG_en_2.fm Page 10 Monday, September 25, 2006 2:20 PM
11
EN
Power Management
This product is powered by a built-in rechargeable battery which cannot be changed. Do not
attempt to replace the battery. Rechargeable battery can be charged and discharged
hundreds of times, but it will eventually wear out. After a period of time that will vary depending
on the use and usage conditions, you may find that the built-in battery will power your product
for only a couple of hours, requiring you to charge more frequently.
Do charge your device only with the charger provided in the sales package. Unplug the
charger when not in use. Do not leave the device connected to the charger for a longer period
than needed, since overcharging may shorten the battery lifetime.
If left unused, a fully charged battery will discharge itself over time.
Temperature extremes may affect the ability of the battery to charge. Always try to keep the
device between 15°C and 25°C (59 F and 77 F). Leaving the device in hot or cold places, such
as in a closed car in summer or in winter conditions, will reduce the capacity and lifetime of
the battery. A device with a hot or cold battery may not work for a while even when the battery
is fully charged. Battery performance is particularly limited in temperatures well below
freezing. Do not charge the battery in a humid environment.
BHS-801_Headset_UG_en_2.fm Page 11 Monday, September 25, 2006 2:20 PM
12
Care and Maintenance
Switch off the device before putting it into your pocket or bag. Otherwise the device may
answer or make a call without you knowing it.
Do not expose the device to liquid, moisture or humidity as it is not waterproof.
Do not use or store the device in dusty, dirty areas. Its moving parts and electronic
components can be damaged.
Do not store the device in hot areas. High temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain plastics.
Do not store the device in cold areas. When the device returns to its normal temperature,
moisture can form inside the device and damage electronic circuit boards.
Do not drop, knock, or shake the device. Rough handling can break internal circuit boards
and fine mechanics.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
Use a soft, clean, dry cloth to clean any lenses.
Do not expose your device to contact with sharp objects as this will cause scratches and
damage.
Do not stick anything inside the device as this may damage internal components.
Do not dismantle the device or the charger as they do not contain serviceable parts and
taking apart the device may expose you to dangerous voltages or other hazards.
Act according to your local rules and do not dispose of this product as part of your
normal household waste. Dispose of this product in a separate collection system
meant for recycling of electrical and electronic products.
BHS-801_Headset_UG_en_2.fm Page 12 Monday, September 25, 2006 2:20 PM
13
EN
How to get service for my IQUA Product?
If you believe that you are entitled to a repair or replacement of your IQUA Product based on
your statutory rights under the applicable national laws relating to the sale of consumer
products or warranty given by the retailer, who has sold the IQUA Product to you, please
contact your retailer.
DECLARATION OF CONFORMITY
We (Iqua Ltd.) declare, under our sole responsibility, that the product (BHS-801) conforms
with the provisions of the following Council Directive: 1999/5/EC.
0523 FCC ID: TUFBHS-801 6574A-BHS801
IC:
BHS-801_Headset_UG_en_2.fm Page 13 Monday, September 25, 2006 2:20 PM
BHS-801_Headset_UG_en.fm Page 13 Monday, June 19, 2006 4:13 PM
15
ES
Información general
Gracias por adquirir el Auricular inalámbrico Bluetooth
®
BHS-801 de Iqua. Este nuevo
dispositivo es un producto elegante que le permite una cómoda comunicación en modo
manos libres con los teléfonos móviles compatibles que admiten la tecnología inalámbrica
Bluetooth.
Descripción del producto
1 Botón de encendido/
apagado
2 Indicador luminoso
3 Botón de aumento (+) del
volumen
4 Botón de reducción (-) del
volumen
5 Botón de llamada
6 Gancho
7 Conector del cargador
1
2
3
4
5
6
7
BHS-801_Headset_UG_es.fm Page 15 Monday, September 25, 2006 1:48 PM
16
Contenido del paquete de ventas
1. Auricular
2. Dos ganchos (uno acoplado al auricular)
3. Auricular de tapón estéreo
4. Adaptador para
auricular de tapón
5. Cargador de pared
con miniconector
USB
6. Guía del usuario
7. Guía rápida
8. Funda protectora
1
2
3
4
5
6
7
8
BHS-801_Headset_UG_es.fm Page 16 Monday, September 25, 2006 1:48 PM
17
ES
Inicio
Colocar el auricular
El diseño de este auricular está pensado para adaptarse
cómodamente a su oreja cuando se utiliza uno de los
ganchos que incluye el paquete de ventas. Para su
consulta, vea las imágenes de la página 16.
1. Para acoplar el gancho, inserte la unidad principal
del auricular en el anillo del gancho y presione hasta
que encaje en su sitio.
2. Colóquese el auricular en la oreja y oriente el
micrófono hacia su boca. Compruebe que el tamaño
del gancho es el apropiado para su oreja; de lo
contrario, pruebe con otro gancho.
3. Para quitarlo, tire de él con cuidado hasta separarlo
del auricular.
Cargar la batería
Antes de utilizar el auricular, es preciso cargar la batería durante unas 2 horas. Una vez
cargada por completo, proporcionará una autonomía de hasta 10 horas de conversación y
150 horas en modo de espera.
1. Conecte el cable del cargador al conector del auricular.
2. Conecte el cargador a una toma de corriente. Se encenderá una luz roja.
3. Cuando la batería esté cargada por completo, la luz roja se apagará.
BHS-801_Headset_UG_es.fm Page 17 Monday, September 25, 2006 1:48 PM
18
Encender y apagar
Para encender el auricular, mantenga pulsado el botón hasta que oiga un pitido y una
luz verde parpadee varias veces.
Para apagarlo, mantenga pulsado el botón hasta que oiga un pitido y una luz roja
parpadee varias veces.
Vincular el auricular al teléfono móvil
Uso del auricular por vez primera
La primera vez que se usa el auricular, el dispositivo accede automáticamente al modo de
vinculación. Esto se indica mediante el parpadeo de la luz verde y la luz roja de forma
alternativa. Siga los pasos 2 a 4 que se indican a continuación para vincular su teléfono móvil
al auricular.
Uso del auricular más adelante
Cuando se enciende el auricular, el dispositivo se vuelve a conectar automáticamente al
último teléfono con el que ha estado conectado. Si no se logra establecer la conexión porque
no se encuentra dicho teléfono, el auricular no se conectará, la luz verde empezará a
parpadear y deberá finalizar la vinculación manualmente:
1. Una vez encendido el dispositivo, mantenga pulsado el botón de llamada hasta que las
luces roja y verde empiecen a parpadear de forma alternativa.
2. Complete el proceso en su teléfono móvil. Consulte el manual de su teléfono para
obtener información sobre la búsqueda de dispositivos y el proceso de vinculación.
En cuanto el teléfono localice al auricular, la pantalla del teléfono mostrará el texto Iqua
BHS-801.
BHS-801_Headset_UG_es.fm Page 18 Monday, September 25, 2006 1:48 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132

Iqua BHS-801 Manuel utilisateur

Catégorie
Casques mobiles
Taper
Manuel utilisateur