Fibaro FGHCL Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

Thank You
for purchasing
Home Center Lite
PL
EN
DE
FR
ES
PT
Menu
english..........................................
polski............................................
deutsch........................................
français.........................................
español.........................................
português.....................................
5
17
29
41
53
65
русский.........................................
89
RU
magyar.........................................
101
HU
italiano.....................................
77
IT
2
www.manuals.fibaro.com
3
4
5
IMPORTANT!
Read the manual before attempting to use the device!
For more information about FIBARO System, like video guides, technical manuals, configuration parameters
and declarations, visit our website: manuals.fibaro.com. If you still need some assistance, contact our
Technical Support or a closest certified FIBARO reseller which can be found at www.fibaro.com.
Note:
Some of the FIBARO System components installation may involve mains voltage connection.
It can be dangerous. If you are not sure how to install the devices, use a certified installer’s services.
Support
EN
Do not expose this product to moisture, water or other liquids.
This product is designed for indoor use only. Do not use outside!
Do not attempt to examine or repair this product yourself.
Contents
AC/DC Adapter Ethernet Cable
Antenna Home Center Lite
6
1. Connect antenna 2. Connect ethernet cable
3. Connect power adapter 4. Turn on Home Center Lite
Start from connecting the antenna,
by turning the mounting screw clockwise.
Connect the included power adapter
to Home Center Lite and plug it to the mains
socket.
Using the included ethernet cable,
connect Home Center Lite’s LAN port to a
router in order to connect the gateway to
internet.
Press the POWER button briefly.
Your Home Center Lite will be ready
to work in few seconds.
7
Your Local Network
Connect your Home Center Lite with a router using the
included LAN cable and start the gateway. From now on
Home Center Lite will be visible to all devices within your
local area network (LAN).
Remote Access
By default the Home Center Lite is visible only within your local
network. To enable remote access from outside of your local
network, configure a home.fibaro.com account.
Internet Modem
Smartphone Tablet
Home Center Lite
Computer
8
LED diodes
LEDs located on the front panel of the Home
Center Lite enclosure have the following
purpose:
Power
Glows when the power supply is on.
Lan Network
Glows when the HCL is connected
to the local network.
Internet
Glows when the HCL is connected
to the internet.
Z-Wave
Blinks when the HCL sends commands
to the Z-Wave network devices.
Update available
Blinks when a software update is available.
9
First launch on desktop
1
2
3
4
5
6
7
Go to www.fibaro.com/support and download FIBARO Finder.
Launch FIBARO Finder and click Refresh.
Select your Home Center Lite and click Connect.
Log in with the defaults: admin / admin
Select Configuration from the main menu.
Scroll down to the bottom and click Start upgrade
(if not visible - wait a few minutes and refresh the page).
When a new software is installed, log back in.
10
First launch on mobile devices
Download FIBARO mobile app appropriate for your device.
For iPhone: www.fibaro.com/ios-app
For Android: www.fibaro.com/android-app
Select your Home Center Lite from the list.
Log in with the defaults: admin / admin
Follow the steps of the configuration wizard.
1
2
3
5
6
4
Launch downloaded app.
11
Create Rooms
When setting up your intelligent home start with
creating rooms to reflect the layout of your home.
Select Rooms from the main menu.
1
2
3
4
Rooms DevicesYour home
Sections
Section is a group of rooms in your home.
Section may be whole floor or a few rooms.
Add Section
Section Name Add
Name the room and choose the section
to which you would like to add it.
Add Room
AddRoom Name Section
Change an icon
Each room can be represented by the
unique icon. You can change the icons in
the advanced room’s settings.
Rooms
12
Add devices
After creating the rooms you can start
adding the devices.
Devices ScenesRooms
Select “Devices” from the main menu.
Select the “Add or remove device” option from the
left side menu. Click “Add” to start adding a new
device (learning mode).
Add or remove device
The timer will count down the time (30 sec by
default) for you to add a new device to the Z-Wave
network (inclusion).
Note that the device needs to be located within
direct range of the Home Center Lite during the
inclusion process.
Please refer to each device’s manual for further
information on how to include it into the Z-Wave
network.
Danger of electrocution! If you are not sure how
to connect a device to the wires, please contact
a qualified installer.
NOTE:
13
Conformity with EU directives:
RED 2014/53/EU
RoHS 2011/65/EU
RoHS 2015/863
Simplified EU declaration of conformity:
Hereby, Fibar Group S.A. declares that the device is in compliance with Directives
2014/53/EU and 2011/65/EU, 2015/863. The full text of the EU declaration of conformity
is available at the following internet address: www.manuals.fibaro.com
WEEE Directive Compliance:
Device labelled with this symbol should not be disposed with other household wastes.
It shall be handed over to the applicable collection point for the recycling of waste
electrical and electronic equipment.
Specifications:
Power supply:
Network interface:
Operating temperature:
Radio protocol:
Radio frequency:
Dimensions (L x W x H):
9-12 VDC (included)
10/100 Base-T Ethernet (RJ-45)
10-40°C
Z-Wave
90 x 90 x 33 mm
ATTENTION!
This product is not a toy. Keep away from children and animals!
Maximum transmit power: 0dBm
EU 868.40/868.42 MHz; HK 919.82/919.80 MHz;
ANZ 921.40/921.42 MHz; RU 869.00/869.02 MHz;
14
Guarantee terms and conditions
1. FIBAR GROUP S.A. with its registered office in Wysogotowo, ul.
Serdeczna 3, 62-081 Wysogotowo, entered into the Register of
Entrepreneurs of the National Court Register maintained by the District
Court for Poznań-Nowe Miasto and Wilda in Poznań, VIII Commercial
Division of the National Court Register (KRS) under number: 553265,
NIP 7811858097, REGON: 301595664, share capital PLN 1,182,100
paid in full, other contact information is available at:
www.fibaro.com (hereinafter „the Manufacturer”) guarantees that
the device sold (hereinaftr: „the Device” is free from material and
manufacturing defects.
2. The Manufacturer shall be responsible for malfunctioning of the Device
resulting from physical defects inherent in the Device that cause its
operation to be incompatible with the specifications within the period of:
• 24 months from the date of purchase by the consumer,
• 12 months from the date of purchase by a business customer
(the consumer and business customer are further collectively referred
to as „Customer”).
3. The Manufacturer shall remove any defects revealed during the
guarantee period, free of charge, by repairing or replacing (at the sole
discretion of the Manufacturer) the defective components of the Device
with new or regenerated components. The manufacturer reserves the
right to replace the entire Device with a new or regenerated device.
The Manufacturer shall not refund money paid for the device.
4. Under special circumstances, the Manufacturer may replace the Device
with a different device most similar in technical characteristics.
5. Only the holder of a valid guaranty document shall be entitled to make
claims under guarantee.
6. Before making a complaint, the Manufacturer recommends
using the telephone or online support available at
https://www.fibaro.com/support/.
7. In order to make a complaint, the Customer should contact the
Manufacturer via the email address given at
https://www.fibaro.com/support/.
8. After the complaint has been properly filed, the Customer will receive
contact details for the Authorized Guarantee Service („AGS”).
The customer should contact and deliver the Device to AGS.
Upon receipt of the Device, the manufacturer shall inform the Customer
of the return merchandise authorization number (RMA).
9. Defects shall be removed within 30 days from the date of delivering
the Device to AGS. The guarantee period shall be extended by the time
in which the Device was kept by AGS.
10. The faulty device shall be provided by the Customer with complete
standard equipment and documents proving its purchase.
11. The cost of transporting the Device in the territory of the Republic
of Poland shall be covered by the Manufacturer. The costs of the Device
transport from other countries shall be covered by the Customer. For
unjustified complaints, AGS may charge the Customer with costs
related to the case.
12. AGS shall not accept a complaint claim when:
• the Device was misused or the manual was not observed,
• the Device was provided by the Customer incomplete, without
accessories or nameplate,
• it was determined that the fault was caused by other reasons than
a material or manufacturing defect of the Device
• the guarantee document is not valid or there is no proof of purchase,
13. The guarantee shall not cover:
• mechanical damages (cracks, fractures, cuts, abrasions, physical
deformations caused by impact, falling or dropping the device or other
object, improper use or not observing the operating manual);
• damages resulting from external causes, e.g.: flood, storm, fire,
lightning, natural disasters, earthquakes, war, civil disturbance, force
majeure, unforeseen accidents, theft, water damage, liquid leakage,
battery spill, weather conditions, sunlight, sand, moisture, high or low
temperature, air pollution;
• damages caused by malfunctioning software, attack of a computer
virus, or by failure to update the software as recommended by the
Manufacturer;
• damages resulting from: surges in the power and/or
telecommunication network, improper connection to the grid in a
manner inconsistent with the operating manual, or from connecting
other devices not recommended by the Manufacturer.
• damages caused by operating or storing the device in extremely
adverse conditions, i.e. high humidity, dust, too low (freezing) or too
high ambient temperature. Detailed permissible conditions for operating
the Device are defined in the operating manual;
• damages caused by using accessories not recommended by the
Manufacturer
• damages caused by faulty electrical installation of the Customer,
including the use of incorrect fuses;
• damages caused by Customer’s failure to provide maintenance
and servicing activities defined in the operating manual;
• damages resulting from the use of spurious spare parts
or accessories improper for given model, repairing and introducing
alterations by unauthorized persons;
• defects caused by operating faulty Device or accessories.
14. The guarantee shall not cover natural wear and tear of the Device
and its components listed in the operating manual and in technical
documentation as such elements have a defined operational life.
15. The Device Guarantee shall not exclude, limit or suspend the
Customer’s warranty rights.
16. The Manufacturer shall not be liable for damages to property caused
by defective device. The Guarantor shall not be liable for indirect,
incidental, special, consequential or punitive damages, or for any
damages, including, inter alia, loss of profits, savings, data,
loss of benefits, claims by third parties and any other damages arising
from or related to the use of the Device.
15
16
17
WAŻNE!
Przeczytaj instrukcję przed uruchomieniem urządzenia!
Więcej informacji na temat Systemu FIBARO, jak filmy instruktażowe, instrukcje techniczne, parametry
zaawansowane i deklaracje znajdziesz na stronie manuals.fibaro.com. Jeśli nadal potrzebujesz pomocy,
skontaktuj się z naszym działem Wsparcia Technicznego lub najbliższym autoryzowanym sprzedawcą
FIBARO, których znajdziesz na stronie: www.fibaro.com
Wskazówka:
Instalacja niektórych urządzeń FIBARO wymaga podłączenia do napięcia sieciowego, co może być
niebezpieczne. Jeśli nie masz pewności, jak zainstalować urządzenie, skorzystaj z usług autoryzowanego
instalatora.
Wsparcie
PL
Nie wystawiać urządzenia na działanie wilgoci, wody lub innych cieczy.
Ten produkt jest przeznaczony wyłącznie do użytku wewnątrz pomieszczeń. Nie używać na zewnątrz!
Nie należy podejmować prób samodzielnego rozbierania, napraw lub modyfikacji urządzenia.
Zawartość opakowania
Zasilacz Kabel ethernetowy
Antena Home Center Lite
18
1. Zamontuj antenę 2. Podłącz kabel ethernetowy
3. Podłącz zasilacz 4. Włącz Home Center Lite
Zacznij od przykręcenia anteny
zgodnie z ruchem wskazówek zegara.
Podłącz zasilacz do Home Center Lite,
a jego wtyczkę sieciową do gniazda sieci
elektrycznej.
Kablem ethernetowym połącz złącze
LAN Home Center Lite ze swoim routerem,
aby podłączyć centralę do internetu.
Przyciśnij krótko przycisk POWER.
Po chwili Home Center Lite będzie
gotowa do pracy.
19
Twoja sieć lokalna
Gdy już połączysz swoją Home Center Lite z routerem za
pomocą kabla sieciowego i włączysz centralę, będzie ona
widoczna dla wszystkich urządzeń w Twojej sieci lokalnej (LAN).
Dostęp zdalny
Domyślnie Twoja centrala jest widoczna wyłącznie w sieci lokalnej.
Aby umożliwić dostęp zdalny, spoza sieci lokalnej, skonfiguruj swoje
konto na stronie dom.fibaro.com.
Internet Modem
Smartfon Tablet
Home Center Lite
Komputer
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112

Fibaro FGHCL Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à