Tascam DR 60D MKII Manuel utilisateur

Taper
Manuel utilisateur
D01230700A
DR-60D
)
"
Linear PCM Recorder
ENGLISH
FRANÇAIS
ESPAÑOL
DEUTSCH
ITALIANO
OWNER'S MANUAL
MODE D’EMPLOI
MANUAL DEL USUARIO
BEDIENUNGSANLEITUNG
MANUALE DI ISTRUZIONI
2
TASCAM DR-60DMKII
TASCAM is a trademark of TEAC CORPORATION, registered
in the U.S. and other countries.
SDHC Logo is a trademark of SD-3C, LLC.
Microsoft, Windows and Windows Vista are either registered
trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
Apple, Macintosh, iMac, Mac OS and Mac OS X are trademarks
of Apple Inc.
Other company names, product names and logos in this
document are the trademarks or registered trademarks of
their respective owners.
http://tascam.jp/
TEAC AMERICA, INC.
http://tascam.com/
Phone: +1-323-726-0303
7733 Telegraph Road, Montebello, California 90640 USA
TEAC MEXICO, S.A. de C.V.
http://teacmexico.net/
Phone: +52-55-5010-6000
Río Churubusco 364, Colonia Del Carmen, Delegación
Coyoacán, CP 04100, México DF, México
TEAC UK LIMITED
http://tascam.eu/
Phone: +44-8451-302511
Meridien House, Ground Floor,69 - 71, Clarendon Road,
Watford, Hertfordshire, WD17 1DS, UK
TEAC EUROPE GmbH
http://tascam.eu/
Phone: +49-611-71580
Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany
TEAC SALES & TRADING(SHENZHEN) CO., LTD
http://tascam.cn/
Phone: +86-755-88311561~2
Room 817, Block A, Hailrun Complex, 6021 Shennan Blvd.,
Futian District, Shenzhen 518040, China
TASCAM DR-60DMKII
3
Owners Manual
IMPORTANT SAFETY PRECAUTIONS
INFORMATION TO THE USER
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures.
a) Reorient or relocate the receiving antenna.
b) Increase the separation between the equipment and receiver.
c) Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
d) Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications to this equipment not expressly approved by TEAC
CORPORATION for compliance could void the user’s authority to operate this
equipment.
For U.S.A.
For Canada
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMERIQUE DE LA CLASSE B EST CONFORME A LA NORME
NMB-003 DU CANADA.
Declaration of Conformity
Model Number : DR-60DMKII
Trade Name : TASCAM
Responsible party : TEAC AMERICA, INC.
Address : 1834 Gage Road, Montebello, California, U.S.A.
Telephone number : 1-323-726-0303
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including inter-
ference that may cause undesired operation.
DECLARATION OF CONFORMITY
We, TEAC EUROPE GmbH. Bahnstrasse 12, 65205 Wiesbaden-Er-
benheim, Germany declare in own responsibility, the TEAC
product described in this manual is in compliance with the
corresponding technical standards.
IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance with the
manufacturers instructions.
8 Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or
4
TASCAM DR-60DMKII
the third prong are provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
10 Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified by the manufac-
turer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or
when unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
The apparatus draws nominal non-operating power from the AC outlet with
its POWER or STANDBY/ON switch not in the ON position.
The mains plug is used as the disconnect device, the disconnect device shall
remain readily operable.
Caution should be taken when using earphones or headphones with the
product because excessive sound pressure (volume) from earphones or
headphones can cause hearing loss.
If you are experiencing problems with this product, contact TEAC for a service
referral. Do not use the product until it has been repaired.
CAUTION
Do not expose this apparatus to drips or splashes.
Do not place any objects filled with liquids, such as vases, on the apparatus.
Do not install this apparatus in a confined space such as a book case or similar
unit.
The apparatus should be located close enough to the AC outlet so that you
can easily grasp the power cord plug at any time.
If the product uses batteries (including a battery pack or installed batteries),
they should not be exposed to sunshine, fire or excessive heat.
CAUTION for products that use replaceable lithium batteries: there is danger
of explosion if a battery is replaced with an incorrect type of battery. Replace
only with the same or equivalent type.
CAUTIONS ABOUT BATTERIES
This product uses batteries. Misuse of batteries could cause a leak, rupture or
other trouble. Always abide by the following precautions when using batteries.
Never recharge non-rechargeable batteries. The batteries could rupture or
leak, causing fire or injury.
When installing batteries, pay attention to the polarity indications (plus/minus
(¥/^) orientation), and install them correctly in the battery compartment as
indicated. Putting them in backward could make the batteries rupture or leak,
causing fire, injury or stains around them.
When you store or dispose batteries, isolate their terminals with insulation
tape or something like that to prevent them from contacting other batteries
or metallic objects.
When throwing used batteries away, follow the disposal instructions indicated
on the batteries and the local disposal laws.
Do not use batteries other than those specified. Do not mix and use new
and old batteries or different types of batteries together. The batteries could
rupture or leak, causing fire, injury or stains around them.
Do not carry or store batteries together with small metal objects. The batteries
could short, causing leak, rupture or other trouble.
Do not heat or disassemble batteries. Do not put them in fire or water.
Batteries could rupture or leak, causing fire, injury or stains around them.
If the battery fluid leaks, wipe away any fluid on the battery case before
inserting new batteries. If the battery fluid gets in an eye, it could cause loss
of eyesight. If fluid does enter an eye, wash it out thoroughly with clean water
without rubbing the eye and then consult a doctor immediately. If the fluid
gets on a persons body or clothing, it could cause skin injuries or burns. If
this should happen, wash it off with clean water and then consult a doctor
immediately.
The unit power should be off when you install and replace batteries.
Remove the batteries if you do not plan to use the unit for a long time.
Batteries could rupture or leak, causing fire, injury or stains around them. If the
TASCAM DR-60DMKII
5
battery fluid leaks, wipe away any fluid on the battery compartment before
inserting new batteries.
Do not disassemble a battery. The acid inside the battery could harm skin or
clothing.
8
For European Customers
Disposal of electrical and electronic equipment
(a) All electrical and electronic equipment should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
(b) By disposing of the electrical and electronic equipment correctly, you will
help save valuable resources and prevent any potential negative effects on
human health and the environment.
(c) Improper disposal of waste equipment can have serious effects on the
environment and human health as a result of the presence of hazardous
substances in electrical and electronic equipment.
(d) The crossed out wheeled dust bin
symbol indicates that electrical and electronic equipment must
be collected and disposed of separately from household waste.
(e) The return and collection systems are available to the end users.
For more detailed information about disposal of old electrical
and electronic equipment, please contact your city office, waste
disposal service or the shop where you purchased the equipment.
Disposal of batteries and/or accumulators
(a) Waste batteries and/or accumulators should be disposed of separately from
the municipal waste stream via designated collection facilities appointed by
the government or the local authorities.
(b) By disposing of waste batteries and/or accumulators correctly, you will
help save valuable resources and prevent any potential negative effects on
human health and the environment.
(c) Improper disposal of waste batteries and/or accumulators can have serious
effects on the environment and human health as a result of the presence of
hazardous substances in batteries and/or accumulators.
(d) The crossed out wheeled dust bin
symbol indicates that batteries and/or accumulators must be collected and
disposed of separately from household waste.
If the battery or accumulator contains more than the specified
values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined
in the Battery Directive (2006/66/EC), then the chemical symbols
for lead (Pb), mercury (Hg) and/or cadmium (Cd) will be indicated
beneath the crossed out wheeled dust bin symbol.
(e) The return and collection systems are available to the end users.
For more detailed information about disposal of waste batteries and/or
accumulators, please contact your city office, waste disposal service or the
shop where you purchased them.
Pb, Hg, Cd
6
TASCAM DR-60DMKII
Contents
Introduction..............................................................................................................................7
Included items .........................................................................................................................7
Precautions for placement and use ................................................................................7
Beware of condensation ......................................................................................................7
Cleaning the unit ....................................................................................................................7
Using the TEAC Global Site .................................................................................................7
User registration .....................................................................................................................7
Names and Functions of Parts ...........................................................................................8
Front panel ...................................................................................................................................................8
Left side panel............................................................................................................................................8
Right side panel ........................................................................................................................................9
Rear panel .....................................................................................................................................................9
Top panel ......................................................................................................................................................9
Bottom Panel ..............................................................................................................................................9
Home Screen ......................................................................................................................... 10
Preparation .............................................................................................................................11
Powering the unit .................................................................................................................................11
Starting up the unit ............................................................................................................................. 11
Setting the built-in clock ................................................................................................................. 11
Shutting down (putting the unit in standby) .................................................................... 11
Inserting SD cards .................................................................................................................................12
Camera connection and attachment......................................................................................12
Connecting monitors and headphones................................................................................12
Basic operation procedures ............................................................................................ 13
Menu structure.......................................................................................................................................13
Recording ............................................................................................................................... 13
Recording Screen .................................................................................................................................13
About recording standby ................................................................................................................15
Menu structure.......................................................................................................................................15
Adjusting the input level .................................................................................................................15
Using the limiter ....................................................................................................................................15
Using the low-cut filter .....................................................................................................................16
Overview of recording modes .....................................................................................................16
Recording (MONO/STEREO recording)...................................................................................17
Playback .................................................................................................................................. 18
Adjusting the playback volume ..................................................................................................18
Playback ......................................................................................................................................................18
Selecting files for playback (skipping) ....................................................................................18
Menu structure.......................................................................................................................................18
Quick Operations ................................................................................................................. 19
QUICK button overview ...................................................................................................................19
Connecting with a Computer ......................................................................................... 19
Connecting with a computer using USB ...............................................................................19
Exchanging files with a computer .............................................................................................19
Disconnecting from a computer ................................................................................................19
Settings and Information ................................................................................................. 19
System Settings .....................................................................................................................................19
Quick reference for using various functions.............................................................20
Message...................................................................................................................................23
Troubleshooting .................................................................................................................. 24
Specifications ........................................................................................................................ 25
Ratings..........................................................................................................................................................25
Inputs and outputs ..............................................................................................................................25
Audio performance .............................................................................................................................25
Recording times.....................................................................................................................................25
Requirements for connected computers .............................................................................26
General ........................................................................................................................................................26
TASCAM DR-60DMKII
7
Introduction
Thank you very much for purchasing the TASCAM
DR-60DMKII Linear PCM Recorder.
Before connecting and using this unit, please take
time to read this manual thoroughly to ensure you
understand how to properly set it up and connect
it, as well as the operation of its many useful and
convenient functions. After you have finished
reading this manual, please keep it in a safe place for
future reference.
This Owner's Manual explains the main functions
of this unit. Please see the Reference Manual for
information about all the unit's functions.
You can also download this Owner's Manual and the
Reference Manual from the TEAC Global Site (http://
teac-global.com/).
Included items
This product includes the following items.
Take care when opening the package to avoid
damaging the items. Keep the packing materials for
transportation in the future.
Please contact TEAC if any of these items are missing
or have been damaged during transportation.
Main unit .................................................................................. × 1
USB cable ................................................................................. × 1
Owners Manual (this manual)
including warranty ............................................................× 1
Precautions for placement
and use
The environmental temperature operating range
of this unit is 0–40°C (32–104°F).
Do not install this unit in the following types of
locations. Doing so could degrade the sound
quality and/or cause malfunctions.
Places with significant vibrations
Near windows or other places exposed to
direct sunlight
Near heaters or other extremely hot places
Extremely cold places
Places with bad ventilation or high humidity
Very dusty locations
Locations exposed directly to rain or other
water
Do not place this unit on top of a power amplifier
or other device that generates heat.
If this unit is placed near a power amplifier or
other device with a large transformer, it could
cause a hum. If this occurs, increase the distance
between this unit and the other device.
This unit could cause color irregularities on a TV
screen or noise from a radio if used nearby. If this
occurs, use this unit farther away.
This unit might produce noise if a mobile phone
or other wireless device is used nearby to make
calls or send or receive signals. If this occurs,
increase the distance between this unit and those
devices or turn them off.
Beware of condensation
If the unit is moved from a cold to a warm place,
or used after a sudden temperature change, there
is a danger of condensation; vapor in the air could
condense on the internal mechanism, making
correct operation impossible. To prevent this, or if
this occurs, let the unit sit for one or two hours at the
new room temperature before using it.
Cleaning the unit
Use a dry soft cloth to wipe the unit clean. Do not
wipe with chemical cleaning cloths, thinner, alcohol
or other chemical agents. Doing so could damage
the surface or cause discoloration.
Using the TEAC Global Site
You can download this Owners Manual and the
Reference Manual necessary for this unit from the
TEAC Global Site (http://teac-global.com/).
1.
Open the TEAC Global Site (http://teac-global.
com/).
2.
In the TASCAM Downloads section, click the
desired language to open the Downloads
website page for that language.
NOTE
If the desired language does not appear, click
Other Languages.
3.
Click the product name in the “Search by Model
Name” section to open the Downloads page for
that product.
4.
Select and download the Owners Manual and
the Reference Manual that are needed.
User registration
Customers in the USA, please visit the TASCAM
website (http://tascam.com/) to register as a user
online.
8
TASCAM DR-60DMKII
Names and Functions of Parts
Front panel
1 Handles
Use this to attach a strap.
2 Display
3 DATA dial (ENTER/MARK)
Use to select items and change values on the
setting screens.
4 MONITOR SELECT button
5 MENU button
6 MIXER button
7 QUICK button
This opens the quick menu pop-up.
8 DUAL indicator
This lights orange when recording in dual
recording mode.
9 4CH indicator
This lights orange when recording in 4-channel
recording mode.
0 REC indicator
This blinks when in recording standby and
lights red when recording.
q 1/L knob and PEAK indicator
w Input switch (1/L)
e 2/R knob and PEAK indicator
r Input switch (2/R)
t 3-4 knob and PEAK indicator
y . button
u Stop(8) [HOME] button
i / button
o 7 (playback) button
p SLATE button
Press and hold during playback to record a slate
stone.
a 0 (record) button
Left side panel
NOTE
Do not apply excessive force when plugging
in external devices to connect them to this
unit or during use. In particular, be careful
when using a standard-to-mini plug adapter,
because the application of unintended force
could result in damage to the device.
s 1/L connector (XLR/TRS)
d 3-4 connector (3.5mm stereo mini jack)
f 2/R connector (XLR/TRS)
g CAMERA IN connector (3.5mm stereo mini
jack)
h REMOTE connector (2.5mm TRS jack)
j CAMERA OUT (LOW) volume control
k CAMERA OUT (LOW) connector (3.5mm
stereo mini jack)
TASCAM DR-60DMKII
9
Right side panel
NOTE
Do not apply excessive force when plugging
in headphones and external devices to
connect them to this unit or during use. In
particular, be careful when using a standard-
to-mini plug adapter, because the appli-
cation of unintended force could result in
damage to the device.
l SD card slot
; button
z HOLD switch
x USB port
c PHONES volume control
v PHONES jack (3.5mm stereo mini jack)
b CAMERA OUT (HIGH)/LINE OUT volume
control
n CAMERA OUT (HIGH)/LINE OUT jack
(3.5mm stereo mini jack)
Rear panel
m Battery compartment cover
, Battery compartment
Top panel
. DSLR attachment bracket
/ DSLR mounting screw (1/4-inch)
Bottom Panel
! Tripod mounting threads (1/4-inch)
@ Video camera pin hole
10
TASCAM DR-60DMKII
Home Screen
This is the screen that is usually shown when the unit
is stopped.
CAUTION
When the monitoring function is on, some
meters, icons and other items will change to
recording screen appearance.
1 Monitoring mode
This shows what audio is now being monitored.
Indicator Meaning
MIX
Mix of channels 1-4,
or dual recording mode main file
SUB Dual recording mode sub file
1+2 Mix of channels 1-2
3+4 Mix of channels 3-4
CAM CAMERA IN jack sound input
CH1 Channel 1 sound input
1-M
Left channel of dual recording
mode main file
1-S
Left channel of dual recording
mode sub file
Indicator Meaning
CH2 Channel 2 sound input
2-M
Right channel of dual recording
mode main file
2-S
Right channel of dual recording
mode sub file
CH3 Channel 3 sound input
3-M
Left channel of dual recording
mode main file
3-S
Left channel of dual recording
mode sub file
CH4 Channel 4 sound input
4-M
Right channel of dual recording
mode main file
4-S
Right channel of dual recording
mode sub file
2 Repeat playback setting
Single playback
Single file repeat playback
All file repeat playback
3 Playback area
ALL: All files in the MUSIC folder
FOLDER: All files in the selected folder
4 Current playback file number/total number
of files
This shows the current file number and total
number of files in the current playback area.
5 Elapsed time
This shows the elapsed time (hours: minutes:
seconds) of the current file.
6 Power supply status
When a battery is being used, a battery icon
shows the amount of power remaining in bars
( , , ).
The battery is almost dead and the power will
soon turn off (standby) if the icon has no bars
.
When using the PS-P515U AC adaptor (sold
separately) or USB bus power, appears.
7 Recorder operation status
This icon shows the recorder operation status.
Indicator Meaning
8
Stopped
9
Paused
7
Playing back
,
Searching forward
m
Searching backward
/
Skipping forward
.
Skipping backward
8 Level meter
These show the levels of the input and playback
signals.
TASCAM DR-60DMKII
11
9 Track status display
This icon changes according to the recording
mode.
Indicators
(examples)
Meaning
Playing a file recorded in MONO
or STEREO mode
/ /
/
Monitoring in MONO mode
/ Monitoring in STEREO mode
/
Playing a file recorded in DUAL
MONO or DUAL ST mode or
monitoring in these modes
Playing a file recorded in 4CH
mode or monitoring in this
mode
0 Playback position display
The current playback position is shown by a bar.
q File name
This shows the name of the file playing back
unless there are multiple files recorded in
4-channel recording mode or dual recording
mode.
w Remaining time
This shows the elapsed time (hours: minutes:
seconds) of the current file.
e Level align status
: Level align function off
: Level align function on
r Playback equalizer status
: Playback equalizer off
: Playback equalizer on
t Peak value in decibels (dB)
The maximum level that occurs in a fixed period
of time is displayed digitally.
Preparation
Powering the unit
8
Using AA batteries
1.
Remove the battery compartment cover on the
back of the unit.
2.
Install 4 AA batteries with their ¥ and ^
marks as shown in the battery compartment .
3.
Close the battery compartment cover.
Use the
BATTERY TYPE
item of the
SYSTEM
menu to set the type of battery in order to
accurately show the amount of power remaining
and allow the unit to accurately determine
whether enough power is available for proper
operation. (By default, this is set to
ALKAL
for
alkaline batteries.)
Starting up the unit
To start up the unit from the stopped state, press and
hold the button until TASCAM DR-60DMKII”
(start-up screen) is displayed on the display.
The Home Screen appears when the unit starts up.
Setting the built-in clock
When the unit is started up for the first time (or when
the built-in clock is reset after being left unused
without batteries), the
DATE/TIME
screen appears
before the start-up screen to allow the date and time
to be set.
Shutting down (putting the unit
in standby)
Press and hold the button until “LINEAR PCM
RECORDER” appears on the display.
The power turns off after the unit completes its
shutdown (standby) process.
12
TASCAM DR-60DMKII
Inserting SD cards
1.
Open the SD card slot/USB port cover on the
right side of the unit.
2.
Insert the SD Card into the slot as shown in the
following illustration until it clicks into place.
Camera connection and
attachment
In order to output the sound from this unit to a DSLR
camera and monitor sound from the camera with
this unit, you must connect them with commercial-
ly-available 3.5mm stereo mini plug cables.
1.
If you want to record audio from this unit with
a camera, connect the CAMERA OUT (LOW)
jack on the left side of this unit with the external
mic input on the camera.
If you want to input audio from the camera and
monitor it with this unit, connect the CAMERA
IN jack on the left side of this unit with the
audio output jack on the camera.
DSLR camera
Audio
output jack
External mic
input jack
NOTE
If the output is not loud enough even when
the CAMERA OUT (LOW) volume is set as
high as possible, connect it to the CAMERA
OUT (HIGH)/LINE OUT jack, and use the
CAMERA OUT (HIGH)/LINE OUT volume to
adjust the output level.
Refer to the camera’s operation manual to
identify this connector on the camera.
2.
Use the CAMERA OUT (LOW) volume control
on the left side of the unit to adjust the level
output to the camera.
3.
To mount the camera on this unit, use the
camera attachment screw on the top of the
unit.
Connecting monitors and
headphones
To listen with headphones, connect them to the
PHONES jack.
To listen with an external monitoring system
(powered monitor speakers or an amplifier and
speakers), connect it to the CAMERA OUT (HIGH)/
LINE OUT jack.
Headphones
Powerd monitor speakers
or amplifer and speakers
TASCAM DR-60DMKII
13
Basic operation procedures
1.
Press the MENU button to open the
MENU
Screen.
2.
Turn the DATA dial to select a menu item
(highlighted), and press the DATA dial or /
button to move to various settings screens.
3.
Turn the DATA dial to select a menu item
(highlighted) to be set.
4.
Press the DATA dial or / button to move
the cursor to highlight the value of the setting.
5.
Turn the DATA dial to change the setting.
6.
Press the DATA dial or . button to set a
different item in the same menu.
This enables you to select a new item. Turn the
DATA dial again to select an item to be set.
7.
Repeat step 3 to 6 as necessary to set each
item.
8.
To open the
MENU
screen (or
OTHERS
submenu
screen), press the MENU button. To return to
the Home Screen, press the stop (8) [HOME]
button.
Menu structure
MENU
REC MODE Make recording settings
INPUT SETTING Make input settings
REC SETTING Make recording settings
AUTO REC
Set the auto-recording
function
PLAY SETTING Make playback settings
BROWSE
Work with files and folders
on the SD card
OTHERS
Open the OTHERS
submenu
INFORMATION View information
FILE NAME Make file name settings
DATE/TIME Set the date and time
SYSTEM Make system settings
Recording
Recording Screen
1 Monitoring mode
This shows what audio is now being monitored.
Indicator Meaning
MIX
Mix of channels 1-4,
or dual recording mode main file
SUB Dual recording mode sub file
1+2 Mix of channels 1-2
3+4 Mix of channels 3-4
CAM CAMERA IN jack sound input
CH1 Channel 1 sound input
1-M
Left channel of dual recording
mode main file
1-S
Left channel of dual recording
mode sub file
CH2 Channel 2 sound input
2-M
Right channel of dual recording
mode main file
2-S
Right channel of dual recording
mode sub file
14
TASCAM DR-60DMKII
Indicator Meaning
CH3 Channel 3 sound input
3-M
Left channel of dual recording
mode main file
3-S
Left channel of dual recording
mode sub file
CH4 Channel 4 sound input
4-M
Right channel of dual recording
mode main file
4-S
Right channel of dual recording
mode sub file
2 Prerecording or Auto recording function
status
appears when the prerecording function is
ON, and in recording standby.
appears when the auto recording function
is ON, and recording.
3 Recording format
This shows the file recording format.
WAV16, WAV24, BWF16 or BWF24
4 Recording sampling frequency
This shows the file recording sampling
frequency.
44.1kHz, 48kHz or 96kHz
5 Elapsed recording time
The elapsed recording time of the file appears
as hours: minutes: seconds.
6 Number of recording channels
This shows the number of recording channels
in the file.
ST or MONO
7 Auto tone function status
No icon: Auto tone off
: Auto tone on
8 Recorder operation status
This icon shows the recorder operation status.
Indicator Meaning
09
Recording standby or Recording
paused
0
Recording
Self-timer recording activated
9 Input source
This icon shows the input source.
Indicators
(examples)
Meaning
/ /
/
Mono recording mode input
source
/
Stereo recording mode input
source
/
Dual recording mode input
source and gain setting for the
second recording (0 to –12)
4-channel recording mode
input source
0 Recording level meters
The input signal level is shown.
q File name
The file name that will automatically be given
to the recorded file is shown.
w Remaining recording time
The remaining recording time on the SD card is
shown in hours: minutes: seconds according to
the recording mode, sampling frequency and
recording format settings.
e Low cut filter status
: Low cut filter off
: Low cut filter on
r Limiter function status
: Limiter off
: Limiter on
t SLATE button setting
: SLATE button disabled
: SLATE button enabled
y Peak value in decibels (dB)
Peak input level values are shown digitally.
TASCAM DR-60DMKII
15
About recording standby
This unit has a recording standby function like that of
a professional recorder. In recording standby mode,
you can adjust the input level, for example, and then
start recording quickly.
When in recording standby, the REC indicator blinks
and the recording screen appears.
Menu structure
You can make various settings with the
REC
SETTING
item on the
MENU
screen.
REC SETTING
FORMAT Set the file format
BWF: 16/24-bit,
WAV: 16/24-bit
SAMPLE Set the sampling frequency
44.1kHz, 48kHz, 96kHz
SIZE Set the maximum file size
64MB, 128MB, 256MB,
512MB, 1GB, 2GB
SELF TMR Set the self timer function
OFF, 2sec, 10sec
MONITOR Enabling monitoring
OFF, ON
Adjusting the input level
1.
Press the MENU button to open the
MENU
screen.
2.
Turn the DATA dial to select
INPUT SETTING
,
and press the DATA dial or / button to
open the
INPUT SETTING
screen.
INPUT SETTING
screen appears.
3.
Turn the DATA dial to set the
GAIN
for each
channel, and press the DATA dial or /
button.
Ch1 INPUT SETTING
screen
4.
Turn the DATA dial to set the mic input gain.
Options:
MUTE
,
LOW
(default value),
MID
,
HIGH
,
HI+PLUS
5.
When finished making the setting, press the
stop (8) [HOME] button to return to the
Home Screen.
6.
Press the record (0) button to begin recording
standby.
The record indicator flashes red and the
recording screen appears.
7.
Use the 1/L, 2/R and 3-4 knobs on the front of
the unit to adjust the input levels.
If the input levels are too high, the peak
indicators to the left of the 1/L, 2/R and 3-4
knobs light red.
A b mark is provided at -12dB on the level
meters. Set the input level so that the indicator
bars move to and fro with this mark at about
the center without causing the 1/L knob, 2/
R knob, 3-4 knob PEAK indicator to light red
when the loudest sounds occur.
8.
When finished making the setting, press the
stop (8) [HOME] button to exit recording
standby.
Using the limiter
When the limiter is on, the mic input gain will be
adjusted automatically according to the input level
to set the recording level so that distortion does not
occur even when loud sounds are input.
1.
Press the MENU button to open the
MENU
screen.
2.
Turn the DATA dial to select
INPUT SETTING
,
and press the DATA dial or / button to
open the
INPUT SETTING
screen.
INPUT SETTING
screen appears.
3.
Turn the DATA dial to select
LIMITER
for
a channel, and press the DATA dial or /
button.
Ch1 INPUT SETTING
screen
16
TASCAM DR-60DMKII
4.
Turn the DATA dial to set the limiter for mic
input.
Options Meaning
OFF
(default value)
Limiter off
MONO
Limiter on only for selected
channel
LINK
Limiter on for both selected
and linked channels
5.
When finished making the setting, press the
stop (8) [HOME] button to return to the
Home Screen.
Using the low-cut filter
Use the low-cut filter if you want to cut noise and
other sounds at low frequencies. This function
can be used to reduce air-conditioning noise and
unpleasant wind noise, for example.
1.
Press the MENU button to open the
MENU
screen.
2.
Turn the DATA dial to select
INPUT SETTING
,
and press the DATA dial or / button to
open the
INPUT SETTING
screen.
INPUT SETTING
screen appears.
3.
Turn the DATA dial to select
LOW CUT
for
a channel, and press the DATA dial or /
button.
Ch1 INPUT SETTING
screen
4.
Turn the DATA dial to select the cut off
frequency of the low cut filter for mic input.
Options: OFF (default value), 40Hz, 80Hz, 120Hz
5.
When finished making the setting, press the
stop (8) [HOME] button to return to the
Home Screen.
Overview of recording modes
This recorder has five recording modes.
Use the
REC MODE
item on the
REC MODE
screen
to set the recording mode. The settings available are
different for each recording mode.
MONO mode
This is a mode for mono recording.
STEREO mode (default value)
This is a mode for stereo recording of two
independent left and right channels.
DUAL MONO mode
This mode uses one input source to create files at
two different input levels (set on
INPUT SETTING
screen). Two mono files will be recorded.
DUAL ST mode
This mode uses one input source to create files at
two different input levels (set on
INPUT SETTING
screen). Two stereo files will be recorded.
4CH mode
This mode records 4 external inputs in two pairs as
two stereo files.
Two stereo files will be recorded.
TASCAM DR-60DMKII
17
Recording (MONO/STEREO
recording)
8
Make recording settings
1.
Press the MENU button to open the
MENU
screen.
2.
Turn the DATA dial to select
REC MODE
, and
press the DATA dial or / button to open the
REC MODE
screen.
REC MODE
screen appears.
3.
Turn the DATA dial to select
REC MODE
, and
press the DATA dial or / button.
4.
Turn the DATA dial to set it to
MONO
or
STEREO
(default value:
STEREO
).
5.
Press the DATA dial or . button to select
the other item.
6.
Turn the DATA dial to select
SOURCE
, and press
the DATA dial or / button.
7.
Turn the DATA dial to select the input source.
REC
MODE
SOURCE
(options)
Meaning
MONO
CH1
Channel 1 mono
recording
CH2
Channel 2 mono
recording
CH3
Channel 3 mono
recording
CH4
Channel 4 mono
recording
REC
MODE
SOURCE
(options)
Meaning
STEREO
CH1/2
Channel 1 and 2
stereo recording
CH3/4
Channel 3 and 4
stereo recording
8.
Press the DATA dial or . button to select
the other item.
9.
If
REC MODE
is set to
STEREO
, you can also set
MS mic decoding.
To use a mid-side mic, turn the DATA dial to
select
MS MODE
, and press the DATA dial or
/ button.
10.
Turn the DATA dial to set the decoding mode
when using a mid-side mic.
Options Meaning
OFF Record in ordinary stereo mode.
REC
Use to decode while recording.
Playback is conducted without
decoding.
MONITOR
Record mid-side mic output
without decoding for decoding
later. Use this mode to monitor
when recording with a mid-side
mic.
Use this also when playing back
mid-side files that were recorded
without decoding.
11.
When finished making the setting, press the
stop (8) [HOME] button to return to the
Home Screen.
8
Set where to save the file
1.
Press the MENU button to open the
MENU
screen.
2.
Turn the DATA dial to select
BROWSE
, and press
the DATA dial or / button.
BROWSE
screen appears.
3.
Select (highlight) the folder where you want to
save the recorded file on the
BROWSE
screen,
and press the QUICK button to open the quick
menu pop-up.
4.
Turn the DATA dial to select (highlight)
SELECT
, and press the DATA dial.
5.
This sets the selected folder as the folder where
recorded files are saved and reopens the Home
Screen.
18
TASCAM DR-60DMKII
8
Starting the recording
1.
Press the record (0) button to begin recording
standby.
The screen shows the recording file name, the
input source, the recording audio file type and
sampling frequency. Please confirm that these
are as desired before starting recording.
2.
To start recording, press the record (0) button
again.
When recording starts, the REC indicator
lights continuously, and the display shows the
elapsed recording time and the remaining
recording time.
3.
Press the stop (8) [HOME] button to end
recording and create the audio file.
To pause recording, press the record (0)
button. Press the record (0) button or play
(7) button again to restart recording in the
same file.
If you press the stop (8) [HOME] button
after pausing a recorded audio file up to the
moment that you paused recording is created.
Playback
Adjusting the playback volume
Use the PHONES and CAMERA OUT (HIGH)/LINE
OUT volume controls to adjust the levels output
from the PHONES and CAMERA OUT (HIGH)/LINE
OUT jacks.
Playback
When the Home Screen is open and playback
is stopped, press the play (7) button to start
playback.
8
Pausing
When the Home Screen is open and a file is playing
back, press the stop (8) [HOME] button to pause
playback at the current position.
8
Stopping
When the Home Screen is open and a file is playing
back, press the stop (8) [HOME] button to pause
playback, and press the stop (8) [HOME] button to
return to the beginning of the file.
8
Rewinding and fast-forwarding
(search)
When the Home Screen is open and a file is playing
back or stopped, press and hold the . or /
button to rewind or fast-forward and search the
playback file.
8
Changing the playback position
When the Home Screen is open and playback is
stopped or paused, turn the DATA dial to change
the playback position.
Playback will be paused after the position is changed.
Selecting files for playback
(skipping)
When the Home Screen is open, press the . and
/ buttons to select the file for playback.
If you press the . button when the playback
position is located at the middle of a file, it will return
to the beginning of that file. If you press the .
button when located at the beginning of a file, the
playback position will skip to the beginning of the
previous file.
If you press the / button when located at
the beginning of or middle of a file, the playback
position will skip to the beginning of the next file.
Menu structure
You can make various settings with the
PLAY
SETTING
item on the
MENU
screen.
PLAY SETTING
AREA Set the file selection area
ALL FILES, FOLDER
REPEAT Set the repeat mode
CONTINUOUS, SINGLE,
1 REPEAT, ALL REPEAT
JUMPBACK Set jump-back playback
OFF, 1–10sec, 20sec, 30sec
TASCAM DR-60DMKII
19
Quick Operations
QUICK button overview
The QUICK button provides convenient access to
functions according to the situation.
Screen State Quick menu contents
Home
Screen
Stop/
Pause
Delete/divide file, level
align, playback EQ and
mic input gain
Playback
Level align, playback EQ
and mic input gain
Recording
Standby/
Recording
Mic input gain
BROWSE
screen
Operations for the
selected file of folder
MENU
screen,
OTHERS
screen,
Other settings screens
No function
MIXER
screen Mic input gain
Connecting with a Computer
You can transfer audio files on the SD card in the unit
to a computer, as well as transfer audio files from the
computer to the unit.
Connecting with a computer
using USB
1.
Use the included USB cable to connect the unit
to a computer. If the power is off, turn it on.
2.
On the
USB SELECT
screen, select
STORAGE
,
and press the 7 button to connect this unit to
the computer. “USB connected” will appear on
the display.
3.
This unit appears on the computer screen as an
external volume named “DR-60DMK2.
Exchanging files with a
computer
Click the “DR-60DMK2” drive on the computer screen
to show the “MUSIC and “UTILITY” folders.
To transfer files to the computer, open the “MUSIC
folder and drag and drop the desired files to destina-
tions of your choice.
To transfer files from the computer, drag and drop
the audio files on the computer that you want to the
"MUSIC" folder.
Disconnecting from a computer
Before disconnecting the USB cable, use the proper
procedures for the computer to unmount this unit.
The power turns off after the unit completes its
shutdown process.
See the computers operation manual for instruc-
tions about how to unmount an external volume.
Settings and Information
System Settings
Use the
SYSTEM
menu to make various settings to
use the unit as you like. You can also initialize settings
and format SD cards, for example.
1.
Select
MENU
w
OTHERS
w
SYSTEM
and
press the 7 button.
2.
Make the necessary settings using the various
functions.
20
TASCAM DR-60DMKII
Quick reference for using various functions
Button names are shown like this: MENU.
Instructions are abbreviated. For example, On the Home Screen, press the MENU button. select the
REC SETTING
menu, and then select the
PRE REC
item
becomes: Home Screen w MENU w
REC SETTING
w
PRE REC
.
Not all steps are given for complex operations. For detailed operation procedures, see the Reference Manual.
Category Desired action Function name Procedures, buttons used and explanation
Basic
functions
Return to the Home Screen
stop (8) [HOME]
Return to the Home Screen if you become unsure about how to proceed.
Record
Home Screen w record (0) w record (0)
Recording will start using the current settings.
Play back a recording
Home Screen w play (7)
Play the file shown (selected).
Adjust the playback volume
PHONES volume, CAMERA OUT (HIGH)/LINE OUT volume
Adjust the volume of headphones, speakers, etc.
Select a file for playback
Home Screen w . and /
If there a many files, using the browse function might be more convenient.
Recording
Change the file format
Home Screen w MENU w
REC SETTING
w
FORMAT
Set the recording file format to BWF, WAV, etc.
Using the low-cut filter Low cut filter
Home Screen w MENU w
INPUT SETTING
w
LOW CUT
This function removes noise and other sounds at low frequencies. Set the cutoff frequency.
Set the input gain
Home Screen w MENU w
INPUT SETTING
w
GAIN
Set the input gain.
Adjust the input level
manually
Home Screen w RECORD w 1/L, 2/R, 3-4
Watch the meters and set the recording level so that they do not peak.
Adjust the input level
automatically
Limiter
Home Screen w MENU w
INPUT SETTING
w
LIMITER
This function compresses only loud sounds to prevent overloads and does not change the recording
level.
Other
recording
features
Add a mark during recording Mark
Recording Screen w DATA
This function adds a mark to the file that can be used as an index during playback.
Create a new file manually
while recording
Manual track
incrementation
Recording Screen w /
Use this function if you want to create a new file without interrupting recording when, for example, the
song changes.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152

Tascam DR 60D MKII Manuel utilisateur

Taper
Manuel utilisateur