Dimplex GDS23G8-1974AU Manuel utilisateur

7214980100R01

IMPORTANT SAFETY INFORMATION: Read this manual before attempting to

install or use the Dimplex Electric Fireplace. Always comply with the warnings and

safety instructions contained in this manual to prevent personal injury or property

damage.

To view the full line of Dimplex products, visit www.dimplex.com

Owner’s Manual

Models XHD28L & 6909970259

XHD28G & 6909970559

XHD26L & 6909850259

XHD26G & 6909850559

XHD23L & 6909940259

XHD23G & 6909940559

2 www.dimplex.com

Table of Contents

Conventions used in this manual:

!

NOTE: Procedures and techniques considered important enough to emphasize.

CAUTION: Procedures and techniques which, if not carefully followed, will result in

damage to the equipment.

WARNING: Procedures and techniques which, if not carefully followed, will expose

the user to the risk of  re, serious injury, or death.

Welcome .............................................................3

IMPORTANT INSTRUCTIONS ............................4

Speci cations ......................................................6

Installation ...........................................................7

Operation.............................................................9

Maintenance ......................................................13

Technical Support ..............................................13

Electrical ...........................................................14

Warranty ............................................................ 15

Dimplex Fireplace XHD28L/XHD28G / XHD26L/XHD26G / XHD23L/XHD23G 3

Welcome

Thank you for purchasing a Dimplex Electric Fireplace. Please use our

convenient online registration page to record your model and serial numbers for

future reference at:

www.dimplex.com/register

CAUTION: Read all instructions and warnings carefully before starting installation.

Failure to follow these instructions may result in a possible electric shock or re hazard

and will void the warranty.

Serial Number

Model Number

MOD

MODEL / CAT NO

SERIAL NO

NO NEED TO RETURN TO THE STORE

Questions with operation or assembly? Require Parts Information?

Product Under Manufacturer’s Warranty?

Contact us at:  www.dimplex.com/customer_support

For Troubleshooting and Technical Support

OR  Toll-Free 1-888-DIMPLEX (1-888-346-7539)

Monday to Friday 8:00 a.m. to 4:30 p.m. EST

In order to better serve you, please have your model and serial numbers

ready or register your product online before calling (see above).

4 www.dimplex.com

Basic Precautions

When using any electrical appliance,

basic precautions should always be

followed to reduce the risk of fire,

electric shock, and injury to persons.

These precautions include:

Read all instructions before using

the electric fireplace.

Extreme caution is necessary when

the firebox is used by or near children

or invalids and whenever the firebox is

left operating and unattended.

Always turn off the fireplace when it

is not in use.

Do not operate the fireplace with a

damaged power cord or plug or after

the fireplace malfunctions, has been

dropped, or damaged in any manner.

Contact Dimplex Technical Service at

1-888-346-7539.

Do not use this firebox outdoors.

This fireplace is not intended for

use in bathrooms, laundry areas, or

similar indoor locations. Never locate

the fireplace where it may fall into a

bathtub or other water container.

Do not run power cord under

carpeting. Do not cover cord with

throw rugs, runners, or similar

coverings. Do not route cord under

furniture or appliances. Arrange cord

away from traffic area and where it will

not be tripped over.

IMPORTANT INSTRUCTIONS

To disconnect the fireplace, turn the

controls to OFF and remove the power

cord plug from the outlet.

Connect the power cord to a

properly grounded outlet only.

Do not insert or allow foreign

objects to enter any ventilation or

exhaust opening as this may cause

an electric shock or fire, or damage

the firebox.To prevent a possible fire,

do not block air intakes or exhaust in

any manner. Do not use the fireplace

on soft surfaces, like a bed, where

openings may become blocked.

All electrical heaters have hot and

arcing or sparking parts inside. Do not

use it in areas where gasoline, paint, or

flammable liquids are used or stored.

Use this fireplace only as described

in this manual. Any other use not

recommended by the manufacturer

may cause fire, electric shock, or injury

to persons.

Always plug the fireplace directly

into a wall outlet/receptacle. Never use

the fireplace with an extension cord

or relocatable power tap (outlet/power

strip).

Do not burn wood or other materials

in this fireplace.

When transporting or storing the

fireplace, keep it in a dry place, free

from excessive vibration, and store to

avoid damage.

SAVE THESE INSTRUCTIONS

Dimplex Fireplace XHD28L/XHD28G / XHD26L/XHD26G / XHD23L/XHD23G 5

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

NO USER-SERVICEABLE PARTS INSIDE

NOTE: Changes or modi cations

not expressly approved by the party

responsible for compliance could void

user's authority to operate the equipment.

Special Precautions

CAUTION: Do not open the unit. There

is a risk of electric shock. There are no

user-serviceable parts inside.

CAUTION: Always use a quali ed

technician or service agency to repair the

built-in electric  replace.

WARNING: Remote control contains

a small battery. Keep away from children.

If swallowed, seek medical attention

immediately.

WARNING: Do not install battery

backwards, charge, put in  re or mix with

used or other battery types as it may

explode or leak causing injury.

DANGER: High temperatures may

be generated under certain abnormal

conditions. Do not partially or fully cover

or obstruct the front of the  replace.

!

IMPORTANT INSTRUCTIONS

FCC Compliance

CAUTION: This unit has been tested

and found to comply with the limits for

Class B digital device, pursuant to part

15 of the FCC Rules. These limits are

designed to provide reasonable protection

against harmful interference in a residential

installation. This unit generates, uses and

can radiate radio frequency energy and,

if not installed and used in accordance

with the instructions, may cause harmful

interference to radio or television reception,

which can be determined by turning the unit

OFF and ON, the user is encouraged to try

to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving

antenna.

• Increase the separation between the unit

and the receiver.

• Connect the unit into an outlet on a

circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced

radio/TV technician for help.

This unit complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) This unit may not cause

harmful interference, and (2) this unit must

accept any interference received, including

interference that may cause undesired

operation.

FCC CAUTION: Any changes or

modi cations not expressly approved by

the party responsible for compliance could

void the user’s authority to operate this

equipment.

6 www.dimplex.com

Speciﬁ cations

The Dimplex Electric Fireplace offers an alternative to a wood or gas fireplace. It

can give your existing fireplace new life or transform a cabinet or media center of

your own into a stunning focal point.

Specifications

Electrical

Volts: 120 V, 60 Hz

Amps: 12.5 A

Watts: 1500 W @ 0

o

C

1350 W @ 25

o

C

Wiring: Plug-In

Bulb Type: LED

Approvals

NOTE: A 15 Amp, 120 Volt circuit is

required. A dedicated circuit is preferred,

but not essential in all cases. A dedicated

circuit will be required if, after installation,

the circuit breaker trips or the fuse blows

on a regular basis when the heater is

operating. Additional appliances on the

same circuit may exceed the current rating

of the circuit breaker.

WARNING: Electrical outlet wiring

must comply with local building codes and

other applicable regulations to reduce

the risk of  re, electric shock, or injury to

persons.

!

Dimensions:

Model XHD28

Width: 27-3/8" (695 mm)

Height: 23-1/4" (597 mm)

Depth: 7-1/2" (191 mm)

Model XHD26

Width: 26" (660 mm)

Height: 18-7/8" (479 mm)

Depth: 7-1/2" (191 mm)

Model XHD23

Width: 23" (584 mm)

Height: 20-1/2" (520 mm)

Depth: 7-1/2" (191 mm)

Weight:

Model XHD 28: 32 lbs (14.5 kg)

Model XHD 26: 25 lbs (11.3 kg)

Model XHD 23: 23 lbs (10.4 kg)

Operating Temperature Range:

-4

o

to 104

o

F (-20

o

to 40

o

C)

Dimplex Fireplace XHD28L/XHD28G / XHD26L/XHD26G / XHD23L/XHD23G 7

Installation

Placement

1. The Dimplex Electric Fireplace does

not require any special venting.

Make sure there is clearance for air

circulation beneath the unit and at

least 1/2" behind it.

CAUTION: Do not install the replace

directly on carpet or similar surfaces which

may restrict air ow.

2. Install the unit in an opening with the

following minimum dimensions:

Model XHD28

A 27" (686 mm) wide

B 31-1/8" (587 mm) high

C 8" (203 mm) deep

Model XHD26

A 24-3/8" (619 mm) wide

B 18-1/2" (470 mm) high

C 8" (203 mm) deep

Model XHD23

A 21-1/2" (548 mm) wide

B 20" (508 mm) high

C 8" (203 mm) deep

Mounting

1. If applicable, carefully pour and

evenly distribute the supplied media

in the media tray of the firebox.

Media

Tray

2a. If installing into a Dimplex mantel,

align the front of the firebox

(without front glass installed) with

the front face of the mantel. Install

provided screws into the front

holes on the inside faces of the

firebox. The screw will line up with

a hole in the mantel, securing it in

place.

A

B

C

3. If installing the unit in an existing

fireplace opening, seal all drafts and

vents with a non-fibrous insulation

material to prevent any chimney

debris from falling onto the unit. Do

not install into an existing fireplace

opening that is prone to dampness.

8 www.dimplex.com

2b. If installing into a custom mantel,

or into an existing opening,

secure the firebox by inserting

an appropriate screw through

either the front hole, or back hole

on the inside face of the firebox,

depending on which location

is more appropriate for the

installation.

Installation

Grounding Instructions

This product must be grounded. If it

should malfunction or break down,

grounding provides a path of least

resistance for electric current to reduce

the risk of electric shock. This product

is equipped with a cord having an

equipment-grounding conductor and a

grounding plug.

The plug must be plugged into an

appropri ate outlet that is properly

installed and grounded in accordance

with all local codes and ordinances.

This product is for use on a 120V

circuit and has a grounding plug that

looks like the plug in the following

figure. Make sure that the product is

connected to an outlet having the same

con figuration as the plug. No adapter

should be used with this product.

DANGER: Improper connec tion of

the equipment-grounding conductor can

result in a risk of electric shock. Check with

a qualied electrician or serviceman if you

are in doubt as to whether the product is

properly grounded. Do not modify the plug

provided with the product – if it will not t

the outlet, have a proper outlet installed by

a qualied electrician.

Front

Back

Dimplex Fireplace XHD28L/XHD28G / XHD26L/XHD26G / XHD23L/XHD23G 9

Touch Panel and Remote Controls

The manual controls for the Dimplex Electric Fireplace are located on the front

panel. When not activated, the icons are not visible. Touch the control panel to the

right side of the white line to activate the icons. The selected setting displays on

the left side of the panel.

A multi-function IR (infrared) remote control also is provided. The remote control

has a range of approximately 30 ft (9 m). To operate correctly, the remote control

must be pointed toward the front of the in electric fireplace.

A

B

C

F

D

G

E

H

Operation

A B C D E F

WARNING: The replace must be

installed properly before use.

10 www.dimplex.com

Icon Function Description

A

Power Press to turn unit Off or On.

• Unit Off

Press to turn everything Off. Press again to

turn unit On with previous settings.

• Unit On

Press to turn unit On with previous settings.

- If the flame effect was On, the flame will

turn on and the previous heat setting will

be activated (On or Off). Display will show

current heater temperature setting and after

2 sec displays the room temperature.

- [remote only] If the flame effect was Off,

the previous heat setting will be activated

(On or Off).

- [panel only] If the flame effect was Off, the

flame will turn on and the previous heat

setting will be activated (On or Off)

B

Heat • Heat On

Press to turn heat On (indicated by 1 short

beep). Display will show current heater

temperature setting and after 2 sec displays

room temperature. Use the Temp icon to

change the heater temperature setting.

• Heat Off

Press to turn heat Off (indicated by 1 short

beep).

NOTE: After the heater is switched off, the fan will

continue on for 60 seconds before turning off.

C

Temp Press multiple times to raise the heater

temperature in 1

o

F (1

o

C) increments. Display

will show current temperature. Temperature

range is 62

o

-78

o

F (17

o

-26

o

C).

This feature is active whenever the heat is

enabled.

Operation

Dimplex Fireplace XHD28L/XHD28G / XHD26L/XHD26G / XHD23L/XHD23G 11

Icon Function Description

Disable Heat Press the Heat and Temp buttons on the unit at

the same time and hold for 2 second to disable

the heater. Press and hold again for 2 seconds

to enable the heater.

When the heater is disabled, "--" will display

when Temp button is pressed. The remainder

of the unit's controls will operate in the same

fashion.

o

C /

o

F Temp The display can show the temperature reading

in either

o

C or

o

F. To change the display, press

and hold the Temp and Flame Speeds buttons

on the unit.

D

Flame Speed Press multiple times to toggle through flame

speeds (minimum, medium, maximum). Display

will show current speed number (F1, F2, F3

respectively).

E

Color Themes Press multiple times to change the media and

flame base colors. This feature is active only

when the flame effect is On. Display will show

theme (t0, t1, t2, etc.)

XHD28L, XHD26L or XHD23L

(Log Unit) themes:

• Theme t0 - no flame

• Theme t1 - Natural (flame base off)

• Theme t2 - Red Highlights (flame base red/

orange flickering)

• Theme t3 - Blue Highlights (flame base blue

flickering). .

XHD28G, XHD26G or XHD23G (Media Unit) themes:

• Theme t0 - Midnight Mode

• Theme t1 - Media White

• Theme t2 - Media red/orange flickering

• Theme t3 - Media blue flickering.

• Theme t4 - Media Purple

• Theme t5 - Media Green

• Theme to - Prism Mode (To choose a custom

color, press Brightness icon. Press again to

return to Prism Mode.)

Operation

12 www.dimplex.com

Icon Function Description

F

Brightness Press to change the flame and logs brightness.

Display will show b3, b1, b2 respectively.

• High

• Low

• Medium

G

Flame Press to turn the flame effect On. Press again to

turn the flame effect Off.

H

Timer Press multiple times to change the sleep timer

by 0.5 hr from 0.5 hr to 8 hr before turning off.

Press again, the remaining time on the timer

displays.

Resetting the Temperature

Cutout Switch

Should the heater overheat, an

automatic cutout will turn the heater off.

It will not come back on without being

reset.

To reset the cutout switch, unplug the

unit and wait 5 minutes before plugging

it back in.

CAUTION: If you need to continuously

reset the heater, unplug the unit and call

Technical Support at 1-888-346-7539

Operation

Dimplex Fireplace XHD28L/XHD28G / XHD26L/XHD26G / XHD23L/XHD23G 13

General

Inspect the electric firebox regularly,

depending upon conditions, and at a

minimum yearly intervals. Remove dust

and clean with damp cloth as required.

CAUTION: Except for installation

and cleaning described in this manual, an

authorized service representative should

perform any other servicing.

WARNING: Disconnect power by

unplugging the power power and allow

heater to cool before attempting any

maintenance or cleaning to reduce the risk

of re, electric shock, or injury.

Battery Replacement

To replace the battery:

1. Push the release tab toward the

center and slide the battery cover

open.

2. Install 3V Lithium battery in the

battery holder. The positive (+) side

of the battery faces up.

3. Close the battery cover.

CR2025/2032

RELEASE

OPEN

OPEN ---- OUVRIR

PUSH ---- POUSSER

RELEASE ---- DÉGAGER

Lithium Battery--Batterie au lithium

PUSH

Battery must be recycled or

disposed of properly. Check with

your Local Authority or Retailer for

recycling advice in your area.

Maintenance

Support Services

Technical and troubleshooting support,

as well as a list of replacement parts

can be found on:

www.dimplex.com/customer_support.

Technical Support

14 www.dimplex.com

M

+T°

AC / DC

120V / 12V

~

IR

REMOTE

N

L

LOGSET ASSEMBLY

OR

MEDIA BED

FLAME BASE RGB STRIP

FLAME LED LIGHTS

CUTOUT

FLICKER

MOTOR

BLOWER

MOTOR

IR EYE/DISPLAY/CAPASSITIVE TOUCH

CONTROL BOARD

MAIN CONTROL

BOARD

G

POWER

SUPPLY

NTC

Electrical

Dimplex Fireplace XHD28L/XHD28G / XHD26L/XHD26G / XHD23L/XHD23G 15

One Year Limited Warranty

Products to which this limited warranty

applies

This limited warranty applies to your newly

purchased Dimplex electric compact

replace. This limited warranty applies

only to purchases made in any province of

Canada except for Yukon Territory, Nunavut,

or Northwest Territories or in any of the

50 States of the USA (and the District of

Columbia) except for Hawaii and Alaska.

This limited warranty applies to the original

purchaser of the product only and is not

transferable.

Products excluded from this limited warranty

Light bulbs are not covered by this limited

warranty and are the sole responsibility of

the owner/purchaser. Products purchased

in Yukon Territory, Nunavut, Northwest

Territories, Hawaii, or Alaska are not covered

by this limited warranty. Products purchased

in these States, provinces, or territories are

sold AS IS without warranty or condition

of any kind (including, without limitation,

any implied warranties or conditions of

merchantability or tness for a particular

purpose) and the entire risk of as to the

quality and performance of the products is

with the purchaser, and in the event of a

defect the purchaser assumes the entire cost

of all necessary servicing or repair.

What this limited warranty covers and for

how long

Products covered by this limited warranty

have been tested and inspected prior to

shipment and, subject to the provisions of this

warranty, Dimplex warrants such products

to be free from defects in material and

workmanship for a period of 12 months from

the date of the rst purchase of such product.

The limited 12 month warranty period also

applies to any implied warranties that may

exist under applicable law. Some jurisdictions

do not allow limitations on how long an

implied warranty lasts, so the above limitation

may not apply to the purchaser.

What this limited warranty does not cover

This limited warranty does not apply to

products that have been repaired (except

by Dimplex or its authorized service

representatives) or otherwise altered. This

limited warranty does further not apply

to defects resulting from misuse, abuse,

accident, neglect, incorrect installation,

improper maintenance or handling, or

operation with an incorrect power source.

What you must do to get service under this

limited warranty

Defects must be brought to the attention of

Dimplex Technical Service by contacting

Dimplex at 1-888-346-7539, or 1367

Industrial Road, Cambridge Ontario, Canada

N3H 4W3. Please have proof of purchase,

catalogue/model and serial numbers

available when calling. Limited warranty

service requires a proof of purchase of the

product.

What Dimplex will do in the event of a defect

In the event a product or part covered by this

limited warranty is proven to be defective in

material or workmanship during the 12 month

limited warranty period you have the following

rights:

• Dimplex will in its sole discretion either

repair or replace such defective product

or part without charge. If Dimplex is

unable to repair or replace such product

or part, or if repair or replacement is not

commercially practicable or cannot be

timely made, Dimplex may, in lieu of repair

or replacement, choose to refund the

purchase price for such product or part.

• Limited warranty service will be performed

solely by dealers or service agents of

Dimplex authorized to provide limited

warranty services.

Warranty

16 www.dimplex.com

What Dimplex and its dealers and service

agents are also not responsible for:

IN NO EVENT WILL DIMPLEX, OR ITS

DIRECTORS, OFFICERS, OR AGENTS,

BE LIABLE TO THE PURCHASER OR ANY

THIRD PARTY, WHETHER IN CONTRACT,

IN TORT, OR ON ANY OTHER BASIS,

FOR ANY INDIRECT, SPECIAL, PUNITIVE,

EXEMPLARY, CONSEQUENTIAL, OR

INCIDENTAL LOSS, COST, OR DAMAGE

ARISING OUT OF OR IN CONNECTION

WITH THE SALE, MAINTENANCE, USE, OR

INABILITY TO USE THE PRODUCT,

EVEN IF DIMPLEX OR ITS DIRECTORS,

OFFICERS, OR AGENTS HAVE BEEN

ADVISED OF THE POSSIBILITY OF SUCH

LOSSES, COSTS OR DAMAGES, OR IF

SUCH LOSSES, COSTS, OR DAMAGES

ARE FORESEEABLE. IN NO EVENT

WILL DIMPLEX, OR ITS OFFICERS,

DIRECTORS, OR AGENTS BE LIABLE

FOR ANY DIRECT LOSSES, COSTS,

OR DAMAGES THAT EXCEED THE

PURCHASE PRICE OF THE PRODUCT.

SOME JURISDICTIONS DO NOT ALLOW

THE EXCLUSION OR LIMITATION OF

INCIDENTAL OR CONSEQUENTIAL

DAMAGES, SO THE ABOVE LIMITATION

OR EXCLUSION MAY NOT APPLY TO THE

PURCHASER.

• The purchaser is responsible for removal

and transportation of such product or part

(and any repaired or replacement product

or part) to and from the authorized dealer’s

or service agent’s place of business.

• This limited warranty does not entitle the

purchaser to on-site or in-home services.

On-site or in-home services may be

performed at the purchaser’s specic

request and expense at Dimplex’s then-

current rates for such services.

• Dimplex will not be responsible for, and the

limited warranty services shall not include,

any expense incurred for installation or

removal of the product or part (or any

replacement product or part) or any labour

or transportation costs. Such costs shall

be the purchaser’s responsibility.

How State and Provincial law apply

This limited warranty gives you specic legal

rights, and you may also have other rights

which vary from jurisdiction to jurisdiction.

The provisions of the United Nations

Convention on Contracts for the Sale of

Goods shall not apply to this limited warranty

or the sale of products covered by this limited

warranty.

Warranty

Dimplex North America Limited

1367 Industrial Road

Cambridge ON

Canada N3H 4W3

7214980100R01

CONSIGNES DE SÉCURITÉ IMPORTANTES : Lire le présent manuel avant

d’essayer d’installer ou d’utiliser ce foyer électrique Dimplex. Pour votre sécurité,

toujours respecter tous les avertissements et suivre les consignes de sécurité données

dans le présent manuel an de prévenir les blessures ou les dommages matériels.

Pour découvrir la gamme complète des produits Dimplex, visitez le site

www.dimplex.com

Manuel du propriétaire

Modèles XHD28L et 6909970259

XHD28G et 6909970559

XHD26L et 6909850259

XHD26G et 6909850559

XHD23L et 6909940259

XHD23G et 6909940559

2 www.dimplex.com

Table des matières

Signes conventionnels utilisés dans ce manuel :

!

NOTA : Marches à suivre et techniques d’importance suf santes pour être soulignées.

MISE EN GARDE : Le non respect de ces procédures et techniques provoquera

l’endommagement de l’équipement.

AVERTISSEMENT : Marches à suivre et techniques qui,si elles ne sont pas bien

respectées, exposeront l’utilisateur à des risques d’incendie, de blessure grave ou de décès.

Bienvenue ...........................................................3

INSTRUCTIONS IMPORTANTES .......................4

Spéci cations ......................................................6

Installation ...........................................................7

Utilisation .............................................................9

Maintenance ......................................................13

Support technique .............................................13

Électricité ..........................................................14

Garantie.............................................................15

Foyer Dimplex XHD28L/XHD28G / XHD26L/XHD26G / XHD23L/XHD23G

Bienvenue

Nous vous remercions d'avoir acheté un foyer électrique fabriqué Dimplex.

Veuillez utiliser notre page d'inscription en ligne pour inscrire votre modèle

et vos numéros de série à des ns de référence ultérieure à l'adresse :

www.dimplex.com/register

ATTENTION : Lire attentivement toutes les consignes et tous les avertissements

avant de procéder à l'installation. Le non-respect de ces consignes pourrait entraîner un

risque de choc électrique ou d'incendie et annulera la garantie.

Numéro de série

Numéro de modèle

MOD

MODEL / CAT NO

SERIAL NO

IL N’EST PAS NÉCESSAIRE D’ ALLER AU MAGASIN

Des questions à propos de l'utilisation ou du montage?

Besoin d'information sur les pièces ?

Besoin d’information à propos d’un produit sous garantie du fabricant ?

Communiquer avec nous à :  www.dimplex.com/customer_support

Pour le dépannage et le Service d'assistance technique

OU  Sans frais au 1-888-DIMPLEX (1-888-346-7539)

Du lundi au vendredi de 8 h à 16 h 30 HE

An que nous puissions mieux vous servir, veuillez avoir votre

modèle et votre numéro de série à portée de main ou veuillez inscrire

votre produit en ligne avant de téléphoner (voir ci-dessus).

La page est en cours de chargement...

Dimplex GDS23G8-1974AU Manuel utilisateur

Dimplex GDS23G8-1974AU Manuel utilisateur

dans d''autres langues

Documents connexes