GE Cafe C7CDAAS4PW3 Le manuel du propriétaire

It’s time appliances had a personality. Yours.

Drip Coffee

OWNER’S MANUAL

ENGLISH/FRANÇAIS

ESPAÑOL - Para consultar una version en español de este manual de

instrucciones, visite nuestro sitio de internet cafeappliances.com.

2

THANK YOU FOR MAKING CAFÉ A PART OF YOUR HOME.

We take pride in the craftsmanship, innovation and design that goes

into every Café product, and we think you will too. Among other things,

registration of your appliance ensures that we can deliver important product

information and warranty details when you need them.

Register your Café appliance now online. Helpful websites are available in

the Consumer Support section of this Owner’s Manual. You may also mail in

the pre-printed registration card included in the packing material.

3

Table of Contents

Model: C7CDAAS3PD4 / C7CDAAS2PS1 / C7CDAAS3PD3

/ C7CDAAS3PD2 / C7CDAAS4PW2 / C7CDAAS2PS3 /

C7CDAAS2PS2 / C7CDAAS4PW4 / C7CDAAS4PW3 /

C7CDAAS2PS4

SAFETY INFORMATION ...................................................4

COMPONENTS ...........................................................5

GETTING STARTED .......................................................6

ACCESSORIES ............................................................6

SETUP ...................................................................7

Clock .................................................................7

Strength ...............................................................8

Temperature ...........................................................9

BREWING ............................................................... 10

Auto Brew .............................................................11

WIFI SETUP ............................................................. 12

REGULATORY INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

CARE AND CLEANING .....................................................14

TROUBLESHOOTING TIPS .................................................14

LIMITED WARRANTY ..................................................... 16

CONSUMER SUPPORT ....................................................17

4

WARNING

To reduce the risk of ﬁre, explosion, electric shock, or injury when using

your coee maker, always follow these basic safety precautions.

■ READ ALL INSTRUCTIONS BEFORE USING

■ Use only a 120 V, 60 Hz standard electrical supply that is properly grounded

in accordance with the National Electric Code and local codes and

ordinances.

■ Do not touch hot surfaces. Use handles and knobs.

■ To protect against electric shock, do not place cord, plug, or base unit in

water or other liquids.

■ Product is for household use only. Do not use outdoors.

■ To avoid a possible burn hazard, make sure the carafe is clean, empty and

the lid is locked prior to brewing.

■ Do not let cord hang over edge of table or counter, or touch a hot surface.

■ Scalding may occur if the lid is removed during the brewing cycle .

■ Unplug appliance before cleaning and when not in use.

■ Do not operate if any component, including the cord or plug, is damaged.

■ Appliances should not be used by or near children.

■ To reduce the risk of fire or electric shock, do not attempt to disassemble,

repair, modify, or replace any part of your product.

■ Use this product only for its intended purpose as described in this user

manual.

■ Use of any accessories not recommended by the manufacturer can cause

injuries.

■ Keep ventilation openings in the appliance enclosures or in the built-in

structure, clear of obstruction.

■ Do not place on or near a hot gas or electric burner, or in a heated oven.

■ To disconnect, make sure no coffee brewing, then remove the plug from wall

outlet.

■ This appliance has a polarized plug (one blade is wider than the other). To

reduce the risk of electric shock, this plug is intended to fit into a polarized

outlet only one way. If the plug does not fit fully into the outlet, reverse the

plug. If it still does not fit, contact a qualified electrician. Do not attempt to

modify the plug in any way.

■ Do not use an extension cord.

IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

READ AND SAVE THESE INSTRUCTIONS

5

Components

A

Tank Lid

B

Water Reservoir

C

Strength Button

D

Temperature Button

E

Auto Brew Button

F

Brew/Cancel/Select Dial

G

Mesh Basket Filter

H

Brew Basket Insert

I

Drip Stop Lever

J

Showerhead

K

Thermal Carafe

L

Measuring Scoop

M

Carbon Filter

G

H

I

J

K

L

M

F

E

D

C

B

A

6

INSTALLATION REQUIREMENTS

■ Product is designed to be installed indoors. Do not use your coffee maker

outdoors.

■ Product must be installed upright on a flat, level surface that is able to support

the total weight when full of water.

■ Install the product in a well-ventilated area with an ambient temperature

between 55°F and 90°F.

■ Do not place the product near heat sources such as ovens or cooktops.

■ Do not place the product in direct sunlight.

■ Make sure product can not be accessed by children or animals.

CHARCOAL FILTER

Reorder charcoal filters from geappliances.com/ge/parts/.

Have your model number ready.

Getting Started

Accessories

PREPARE COFFEE MAKER FOR USE

1

Carefully remove packing material. Do not use sharp tools that can damage the

box contents.

2

Ensure all components are present. If any item is missing, please contact us at

cafeappliances.com (in Canada, contact us at cafeappliances.ca).

3

Place the coffee maker upright on a flat, level surface. Make sure the coffee

maker is UNPLUGGED at this time.

4

Wipe the exterior with a soft, damp cloth. Wash the mesh filter, brew basket,

and carafe in warm, soapy water and a soft cloth. Do not use abrasive

cleansers, pads or cloths which can scratch the surface. Rinse and dry

thoroughly. Coffee maker parts are NOT dishwasher safe.

5

Plug the coffee maker into an electrical outlet. Clock flashes AM 12:00.

7

SetUp

CLOCK

■ Push the Temperature button and

hold for 3 seconds. Clock illuminates

on the display and the white dot

on the Temperature button will

illuminate.

■ To set AM/PM: Rotate the Brew/

Select knob and push to select.

To set Hour: Rotate the Brew/Select

knob and push to select.

To set Minutes: Rotate the Brew/Select

knob and push to select.

After you confirm to quit, the outer

ring will illuminate. The ring will not

illuminate to confirm each selection.

NOTE: Push and hold the Brew/Select

knob for 3 seconds at any time to exit

the sub-menu and revert to the previous

settings.

Auto Brew

Hold to Program

Temperature

Hold to Set Clock

Strength

Hold to Descale

AM

Select

Brew

H

o

l

d

t

o

C

a

n

c

e

l

PM

Clock

Button Dot

Illuminates

“Clock”

Illuminates

Push to Select

8

SetUp

STRENGTH

■ Push the Strength button. The

strength options and Strength button

illuminate. The Strength options are

Gold, Light, Medium, and Bold.

GOLD: Brewing to the optimum

strength using set parameters. This

selection will brew coffee to the

highest quality. Cups available are

1 - 10. The temperature selection is

not changeable in GOLD. If at high

elevation, over 5000 feet, do not use

this selection.

For a more personal experience or

at high elevation (over 5000 feet)

utilize the Light, Medium, or Bold

strength. The cup selection is from 1

to 10 by whole cup increments. The

temperature selection is between 185

to 205°F. Recommendation is from

195-205° for best flavor extraction.

LIGHT: Brewing to the lighter strength

is for those who prefer a little lower

extraction of flavor.

MEDIUM: Brew to the optimum

strength with the option to brew

different cup sizes and to brew at

different temperatures.

BOLD: Bold is for those who prefer a

little higher extraction of flavor.

■ Rotate the Brew/Select knob to

select the strength and push to

select or push the Strength button

to confirm your selection. The outer

ring of the Brew/Select knob will

illuminate to confirm selection when

pushed.

Auto Brew

Temperature

Strength

Select

Brew

Strengths

Illuminate

Push to Select

Button Dot

Illuminates

Light Medium BoldGold

Hold to Program

Hold to Set Clock

Hold to Descale

H

o

l

d

C

a

n

c

e

l

to

9

SetUp

TEMPERATURE

This coffee maker is regulated for

temperatures between 185 and 205° F.

It is recommended to brew between 195

to 205° F for best flavor extraction. For

altitudes over 5000 feet, use 185° F to

prevent water from boiling.

NOTE: Temperature can not be changed

if Gold Setting is selected.

■ Push the Temperature button. The

Temperature button illuminates and

the display shows 200.

■ Rotate the Brew/Select knob to

select the temperature and push

to select or push the Temperature

button to confirm your selection. The

outer ring of the Brew/Select knob

will illuminate to confirm selection

when pushed.

■ To switch from Fahrenheit to Celsius,

press and hold the Strength and

Temperature buttons simultaneously

for 3 seconds.

CAUTION

High Altitude: For

use in high altitudes, adjust temperature

down to 185° F so water will not boil.

Auto Brew

Temperature

Strength

Select

Brew

°F

Temp

Button Dot

Illuminates

“Temp”

Illuminates

Push to Select

Hold to Program

Hold to Set Clock

Hold to Descale

H

o

l

d

C

a

n

c

e

l

to

10

Brewing

■ Ensure the brew basket insert and drip stop lever in the bottom of the insert are

clean and that the brew basket insert is in the brew basket.

■ Use either the mesh basket filter (included) or a No. 4 paper filter (not included)

and place into the brew basket insert.

■ Ensure the carafe (included) is clean, empty, and the lid is locked. Make sure the

carafe is in place before brewing. This coffee maker will NOT brew without the

carafe in place. The top of the carafe MUST be engaged with the drip stop lever

on the bottom of the brew basket. If not, the water won’t flow into the carafe and

the basket may overflow during the brewing cycle. If the carafe is not in place

when the brewing cycle is selected, the display will show “Err” and the coffee

maker will chime.

■ Water: This coffee maker is designed to use only the amount of water for the

number of cups selected to be brewed. Fill the water reservoir with fresh, clean,

and odorless (free of chlorine and sulfur) water up to the MAX level indicator. DO

NOT overfill the water reservoir. Water should have some minerals for best flavor.

Reverse Osmosis (RO) systems or distilled water does not have minerals and is

not recommended for coffee brewing.

If there is no water in the reservoir at the start of brewing, an error message (Add

H2O) will show on the display telling you to add water and a chime will sound.

Push the knob to confirm that you are adding water. Once the water is added,

push the knob again to continue brewing. DO NOT add water during brewing

unless the error message is displayed.

■ Coffee: The type of coffee and freshness is a large factor in the flavor, taste and

aroma of brewed coffee. The grind size of the coffee is for brewing using the drip

method.

■ Use the scoop (included) to measure the correct amount of coffee for the number

of cups you are brewing. The measuring scoop is designed for one level scoop of

coffee per 4.5 oz serving of coffee being brewed (4.5 oz of water per serving is

the common measurement for a regular cup of coffee).

Place the coffee into the filter in the brew basket.

TO BREW:

■ After setup of strength and temperature, push the Brew/Select knob. The number

of cups will illuminate on the display along with the last strength that was chosen.

Rotate the Brew/Select knob to choose the number of cups of coffee you want to

brew. Push the Brew/Select knob to confirm. Brewing will start.

11

Brewing

AUTO BREW:

Auto Brew will let you start brewing

automatically at a preset time.

■ Push the Auto Brew button for 3

seconds to program. Rotate Brew/

Select knob to select AM/PM and

push to confirm. Then push the

Auto Brew button to reconfirm AM/

PM. Set the hour and minutes in the

same manner pressing Auto Brew

after each. Next, set the number of

cups by turning the Brew/Select

knob and push to confirm. Set

the strength and temperature in

the same manner. Once all of the

selections have been made, the

Brew/Select knob illuminates. Push

Auto Brew to confirm your choices.

Auto On will illuminate to indicate

that Auto Brew is active.

NOTE: If Gold strength is selected,

you will not be able to select a

temperature. The Gold setting is a

pre-set program that includes a select

temperature. Do not use for high

elevations (over 5000 feet).

Auto Brew

Temperature

Strength

Select

Brew

PM

Auto On

“Auto On”

Illuminates

Push to Select

Button Dot

Illuminates

Hold to Program

Hold to Set Clock

Hold to Descale

H

o

l

d

C

a

n

c

e

l

to

12

WiFi Setup

PAIRING

To put your device into Pairing Mode, press

and hold the Auto Brew and Temperature

buttons at the same time for 3 seconds. You

should see the WiFi symbol illuminate under

the Time Display. Now your device is ready

for Pairing. Follow the instructions given in

the app.

NOTE: When asked for

GE Appliances module

password, It is located

on the label on the back

of your coffee maker.

WIFI CONNECT

Your coffee maker is Café WiFi Connect

Enabled. A WiFi communication card is built

into the product allowing it to communicate

with your Smart Phone for remote

monitoring, control, and notifications.

Please visit cafeappliances.com/connect

to learn more about connected appliance

features, and to learn what connected

appliance App’s will work with your Smart

Phone.

WiFi Connectivity: For assistance with

the appliance or the network connectivity,

please visit cafeappliances.com/connect.

Auto Brew

Temperature

Strength

Select

Brew

PM

Auto On

WiFi symbol

Illuminates

Press and hold

for 3 seconds

Hold to Program

Hold to Set Clock

Hold to Descale

H

o

l

d

C

a

n

c

e

l

to

Connected Appliance Information

Contains FCCID: ZKJ-WCATA006

Network: GE_MODULE_0614

Contains IC: 10229A-WCATA006

Password: XXXXXXXX

MAC ID: D828C94F0614

PT. NO. 245D2228G001

13

Regulatory Information

FCC/IC COMPLIANCE STATEMENT:

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that

may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates uses and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) This device may not

cause interference, and (2) This device must accept any interference, including

interference that may cause undesired operation of the device.

Labeling: Changes or modifications to this unit not expressly approved by the

manufacturer could void the user’s authority to operate the equipment.

ConnectPlus module only (or similar communication module)

RF Exposure - This device is only authorized for use in a mobile application. At

least 20 cm of separation distance between the ConnectPlus device and the user’s

body must be maintained at all times.

FCC ID: ZKJ-WCATA006

IC ID: 10229A-WCATA006

14

Care and Cleaning

CAUTION

Always unplug your coffee maker before cleaning.

CLEANING THE OUTSIDE OF THE COFFEE MAKER

Clean the outside of the coffee maker with a soft, damp cloth. Do not use paper

towels or abrasive cloths and cleaners as they may scratch the finish.

CLEANING THE BREW BASKET AND MESH BASKET FILTER

Remove the mesh basket filter and brew basket. Discard any ground coffee. After

each brew, rinse the mesh basket filter and brew basket under running water. For a

deeper clean, wash in warm soapy water with a soft bristled brush. These parts are

NOT dishwasher safe.

CLEANING THE CARAFE

After each use, empty the carafe. Rinse the carafe and lid under warm running

water. Letting coffee stand overnight in the carafe can lead to staining. For a deeper

clean, wash regularly in warm, soapy water and a soft bristled brush. Do not use

abrasive cleaners as they may scratch the finish. Rinse and dry thoroughly. The

carafe and lid are NOT dishwasher safe

DESCALING

Hard water can cause mineral build-up on internal components. This can cause a

change in taste of the coffee, brewing temperature and brewing flow. The coffee

maker needs to be descaled regularly.

When Descale is flashing under the time display, it means

that too much limescale has built up on the heater. Descale

the coffee maker as soon as possible according to below

instruction. The Descale indicator will go off following the

first rinse after descaling.

To descale, use a mixture of half water/half vinegar. Fill the reservoir to the MAX

indicator. Run the coffee maker through a brewing cycle using the 10 cup setting.

Once the mixture is gone, run the 10 cup brew setting 3 times using clear water in

the reservoir.

NOTE: When descaling, if carafe is removed, heater and pump is shut off and

displays “Err” error code, after 2 minutes the screen will return to idle clock state. To

fix error place the carafe back in place.

Descale

PM

15

Care and Cleaning

Troubleshooting Tips

CAUTION

Always unplug your coffee maker before cleaning.

REMOVE THE FILTER

To remove filter cage from the water reservoir, use a spoon to wedge under the side

tab and lift up the cage. To replace, simply push into hole until the cage sets into

place. It is recommended to change the filter at least every 3 months.

SHOWERHEAD

The showerhead can be removed by rotating and pulling it out.

Make sure the Unlock icon is lined up with the arrow in order

to remove. For a deeper clean, wash regularly in warm, soapy

water and a soft bristled brush. Do not use abrasive cleaners

as they may scratch the finish. Rinse and dry thoroughly.

Problem Solution

An error message

shows up saying “add

H2O”

Press the brew button and “10 cups” will appear on the screen.

Use the dial to adjust the number of cups you desire and pour

that amount of water into the reservoir. Press the brew button

again to start the brew process.

An Error message

shows up saying “Err”

The carafe (coffee pot) is not placed correctly. Remove and

then place in the correct position. Error message will go way

once positioned correctly.

An Error message

shows up saying “Err1”