AR Blue Clean 1850 PSI Electric Pressure Washer Mode d'emploi

Marque: AR Blue Clean

Modèle: 1850 PSI Electric Pressure Washer

Catégorie: Nettoyeurs haute pression

Taper: Mode d'emploi

Questions, problems, missing parts?

Before returning to your retailer, call (1-866-235-5112)

or email (info@arnorthamerica.com) our customer

service department. They are available from 8:00 a.m. -

5:00 p.m., CST, Monday - Friday. www.arblueclean.com

1850 PSI

Electric Pressure Washer

ASSEMBLY, CARE AND

USE INSTRUCTIONS

Model AR 1850

READ CAREFULLY

IMPORTANT: RETAIN THESE INSTRUCTIONS

AND ATTACH RECEIPT TO MANUAL FOR FUTURE

REFERENCE

95028-LM

WARNING: This product can expose you to

chemicals including lead, DEHP, DINP, which is

known to the State of California to cause cancer

and or lead to birth defects. For more information

go to www.P65Warnings.ca.gov

TABLE OF CONTENTS

PRODUCT SPECIFICATIONS

TABLE OF CONTENTS

SPECIFICATIONS

Model

Max PSI

(lbs/sq. in.)

Max GPM

(Gal/per min) Cold Water Volts

Frequency

(Hz) Amps

Weight (lbs.)

AR 1850 1850 1.2 120 60 13 24

PRODUCT SPECIFICATIONS

3URGXFW6SHFLÀFDWLRQV ...................................................................................................... 2

Package Contents ............................................................................................................. 3

Hardware Contents ........................................................................................................... 3

Safety Information ............................................................................................................. 4

Assembly Instructions ....................................................................................................... 6

Operating Instructions ....................................................................................................... 9

Care and Maintenance ................................................................................................... 12

Pump Saver ..................................................................................................................... 13

Troubleshooting ............................................................................................................... 14

Limited Warranty ............................................................................................................. 15

Replacement Parts List .................................................................................................. 16

PACKAGE CONTENTSPACKAGE CONTENTSPACKAGE CONTENTS

HARDWARE CONTENTS

PART DESCRIPTION QUANTITY

G Garden Hose Adapter 1

H High Pressure Foam Cannon 1

I Spray Gun 1

J Spray Gun Trigger Lock 1

KO-Ring Kit 1

AA Screw 1

PART DESCRIPTION QUANTITY

A Power Washer Unit 1

B Spray Gun Holster 1

C Nozzle Cleaning Wire 1

D Super Soft High Pressure

Hose

E Nozzle Tray 1

F High/Low Nozzle Lance 1

Screw

Qty. 1

PW9091850

Note: Screw is located in

package with manual.

SAFETY INFORMATION

SAFETY INFORMATIONSAFETY INFORMATION

Please read and understand this entire manual before

attempting to assemble and operate the product.

This manual contains information that relates to

PROTECTING PERSONAL SAFETY and PREVENTING

EQUIPMENT PROBLEMS. It is very important to read this

manual carefully and understand it thoroughly before

using the product. The symbols listed below are used to

indicate this information.

DANGER

Potential hazard that will result in serious injury or

loss of life.

WARNING

Hazard that could result in serious injury or loss of

life.

CAUTION

Potential hazard that may result in moderate injury

or damage to equipment.

Note: The word “Note” is used to inform the reader of

something the operator needs to know about the tool.

WARNING

To reduce the risk of injury, the user must read

and understand the instructions before using

this product.

1. Warning – When using this product, basic

precautions should always be followed, including the

following.

2. Read all the instructions before using the product.

3. Know how to stop the product and bleed pressures

quickly. Be thoroughly familiar with the controls.

4. Keep operating area clear of persons.

5. Do not overreach or stand on unstable support. Keep

good footing and balance at all times.

)ROORZWKHPDLQWHQDQFHLQVWUXFWLRQVDVVSHFLÀHGLQ

the manual.

7. To avoid personal injury and/or damage to property

and to maximize your power washer experience,

carefully follow all of the safety tips, instructions,

warnings and safeguards and become familiar with

all of the controls. Be sure you know how to quickly

bleed off the pressure from all parts of your power

washer and how to turn off the power washer.

8. This power washer conforms to CSA and other safety

and consumer standards. DO NOT modify or rebuild

any part of your power washer.

9. DO NOT use your power washer when you are under

WKHLQÁXHQFHRIDOFRKRORUGUXJV8VHWKLVSRZHUWRRO

carefully and only when you are alert.

10. Watch your balance and footing while using your

power washer. Surfaces become slippery when wet

and are extra slippery when using a detergent or

cleaner.

11. NEVER operate the power washer in bare feet,

sandals, or open-toed shoes.

12. When using the power washer near children, make

sure they are closely supervised by an adult to avoid

injury. NEVER let a child use the power washer.

.HHSÀQJHUVKDQGVIHHWDQGDQ\SDUWRI\RXUERG\

clear of the stream of high pressure water. The

powerful spray can cause blindness or blast holes in

the skin. It can break a window if you are too close

when you pull the trigger on the spray gun.

14. ALWAYS wear eye protection to prevent injury to

eyes when operating the power washer.

15. To avoid mishaps or injury, ALWAYS use the trigger

safety lock when not using the power washer even if

RQO\VWRSSLQJEULHÁ\

16. The power washer is equipped with a Ground Fault

Circuit Interrupter (GFCI) which greatly reduces the

chance of electric shock while the unit is in use. If

replacement of the plug or cord is needed, use only

identical replacement parts.

17. Point the spray gun in a safe direction when

beginning a power washer session.

18. Warning- NEVER spray directly at a person, animal,

electrical device or the unit itself.

:KHQÀUVWXVLQJWKHVSUD\JXQKROGWKHVSUD\JXQ

and lance with two hands when pulling the trigger

(one hand to pull the trigger and the other to

stabilize the gun assembly) until you get used to the

“kickback” from the spray gun.

20. When you turn the power switch off, water pressure

may remain in the system. To discharge the

pressure, point the spray gun in a safe direction and

pull the trigger.

21. NEVERVSUD\ÁDPPDEOHOLTXLGV

22. NEVER use the power washer in areas that contain

combustible dust, liquids or vapors.

23. Avoid contact of the pressure hose with sharp

objects and examine the hose regularly. Replace

if damaged. Due to the high pressure involved, it

cannot be repaired if cut or damaged.

2QO\XVHGHWHUJHQWVSHFLÀFDOO\IRUPXODWHGIRUSRZHU

washers and follow instructions on the detergent’s

label. Dish or laundry soap is too thick and will

clog the nozzle of your foam cannon.

SAFETY INFORMATION

Double Insolated Product

SAFETY INFORMATIONSAFETY INFORMATION

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Servicing of a Double-Insulated Appliance

Ground Fault Circuit Interrupter Protection:

This pressure washer is equipped with a ground-fault

circuit-interrupter (GFCI) built into the plugs of the

power-supply cord. This device provides additional

protection from the risk of electric shock. Should

replacement of the plug or cord become necessary,

use only identical replacement parts that include GFCI

protection.

In a double-insulated product, two systems of insulation

are provided instead of grounding. Grounding means

are not provided for a double insulated product, nor

should grounding means be added to the product.

Servicing a double-insulated product requires extreme

care and knowledge of the system, and should only be

GRQHE\TXDOLÀHGVHUYLFHSHUVRQQHO

Replacement parts for a double-insulated product must

be identical to the original parts.

A double-insulated product is marked with the words

“Double Insulation” or “Double Insulated”. Product may

also be marked with symbol shown here.

25. Protect eyes, lungs, and skin from exposure to

detergent.

26. Warning-If connection is made to a potable water

system, the system Should be protected against

EDFNÁRZ

CAUTION

Store the power washer indoors to prevent the

water in the unit from expanding under freezing

conditions. When the water freezes and expands,

your power washer will be damaged and become

inoperable. Or, if storing outdoors, it is

recommended you use pump saver (not included)

to protect pumps.

27. NEVER use hot water with your power washer. It will

overheat and damage the high pressure pump.

28. NEVER leave the power washer unattended while it

is powered “ON”.

29. ALWAYS turn the water supply on before turning the

power washer power to on. Running the pump dry

will cause damage to the internal components.

30. NEVER use a water supply to your power washer

that exceeds 150 PSI maximum.

31. NEVER disconnect the high pressure hose from the

power washer while the system is pressurized.

32. NEVER permanently engage the trigger mechanism

on the spray gun.

33. NEVER operate the power washer unless all

components are properly and securely connected.

34. NEVER allow the power washer pump to run for

more than one minute after you have turned off the

water supply. This can cause the motor and pump to

overheat and fail.

35. NEVER use lances or other parts that are not

FRPSDWLEOHIRUWKLVVSHFLÀF$5%OXH&OHDQXQLW

36. NEVER use an extension power cord since it defeats

the effectiveness of the GFCI and increases the

chance of electrocuting the operator.

37. NEVER spray any electrical outlet with your power

washer.

38. Inspect the power cord before using. DO NOT use it

if it is damaged.

39. Stay alert - watch what you are doing.

PREPARATION

Before beginning assembly of product, make sure

all parts are present. Compare parts with package

contents list and hardware contents list. If any part is

missing or damaged, DO NOT attempt to assemble the

product.Please call customer service at 1-866-235-

5112. Replacement parts will be sent no charge.

Estimated Assembly Time: 5 minutes.

Tools Required for Assembly (not included): Phillips

screwdriver.

ASSEMBLY INSTRUCTIONS

PREPARATION

Power Unit Assembly

Slide the spray gun holster (B) onto left side, when

facing the power washer unit (A).

Note: When placing the gun with the lance attached,

the nozzle will rest in this tray.

Screw x 1

Slip tab into slot and screw the nozzle tray (E) on

bottom left, when facing the power washer unit (A).

Secure with screw (AA).

Note: DO NOT use a power screwdriver. When the screw

LVFRPSOHWHO\WLJKWJLYHDVPDOOÀQDOFORFNZLVHWZLVWRI

the screwdriver.

DO NOT overtighten.

Note: When placing the gun with the lance attached, the

nozzle will rest in this tray.

Hardware Used:

ASSEMBLY INSTRUCTIONS

Connect the other end of Super Soft high pressure hose

(D) to spray gun (I) by inserting the brass metal tip of

KLJKSUHVVXUHKRVHLQWRWKHÀWWLQJMXVWDKHDGRIWULJJHU

JXDUG,WZLOOORFNLQWRVSUD\JXQZLWKD´FOLFNµ&RQÀUP

hose is locked into spray gun by slightly pulling on them.

The hose is now securely attached to spray gun.

Note: DO NOT press button on underside of gun when

connecting hose to gun.

Super Soft High Pressure Hose Assembly

Screw Super Soft high pressure hose (D) clockwise onto

bottom front of power washer unit (A). Pull back collar

and insert o-ring post into water outlet far enough so

collar can thread onto outlet threads until hand tight.

If it takes fewer than six turns you have not properly

WLJKWHQHGWKH6XSHU6RIWKLJKSUHVVXUHKRVHÀWWLQJ,W

is easier to position the power washer in front of you to

ensure that the threads are started correctly. Failure

to properly tighten Super Soft high pressure hose will

result in the hose slipping or popping off immediately

upon turning unit on. Do not worry about damage if this

occurs–just reinstall and take extra care when screwing

RQWKH6XSHU6RIWKLJKSUHVVXUHKRVHÀWWLQJ

Note: DO NOT use pliers or locking pliers to tighten.

To release hose (D) from spray gun (I), press button on

underside of gun toward trigger guard. The hose will

slide out from connection.

PREPARATIONASSEMBLY INSTRUCTIONS

Unlock

Lock

Locking Spray Gun (Before Lance Installation)

To lock the trigger of the spray gun (I), aim the gun

away from you and push the lock button from right to

left. After doing so, squeeze or pull the trigger to make

sure it is locked and will not move. Always leave lock

button in locked position when not in use. This ensures

the gun is in “safe” mode until it is ready for use.

High/Low Nozzle Lance and High Pressure Foam

Cannon Installation

While the spray gun (I) is in the locked position, insert

the high/low nozzle lance (F) or high pressure foam

cannon (H) into the end of the spray gun, by inserting

and pushing together turning clockwise simultaneously.

To remove, push together and turn counterclockwise.

Note: Always push the safety lock button to lock the

trigger when changing lances to ensure that they do not

accidentally eject with force during removal.

Garden Hose Adapter Installation

Attach collar of garden hose adapter (G) directly to

power washer water inlet (A). Hand tighten.

Attach garden hose to the garden hose adapter (G).

Note: Flush out garden hose before connecting

to garden hose adapter.

You have now completed assembly and are ready to

begin using your electric power washer. Read and

observe all safety instructions.

OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS

• Make sure the “ON/OFF” switch is in the “OFF”

position. The power switch has international symbols

for ‘on’ and ‘off’: On (|) Off (O).

• Unwind the power cord completely and plug the GFCI

into a grounded 120 volt outlet.

• Turn on water supply at the faucet to completely

open.

• Release safety push trigger lock up and back into

trigger. While pointing the spray gun in a safe

direction, squeeze the trigger on the spray gun until

there is a steady stream of water, letting the water

and air out of the hose. Push trigger lock back down

to lock back into place.

OFF/0

ON/I

OFF/0

ON/I

• Turn the power switch to the “ON” (|) position. The

unit will turn on for 1 - 2 seconds and shut off.

This is a normal function of the auto start feature.

Squeeze the spray gun trigger to begin pressure

washing.

• Begin power washing by squeezing the trigger on the

spray gun all the way into the handle.

• Release the spray gun trigger to stop the power

washer.

• Allow the motor to come to a complete stop before

squeezing the trigger again.

• Squeezing rapidly will cause the auto start feature to

miss an on/off cycle that may prevent it from turning

on while squeezing trigger after rapid squeezing. Use

slow deliberate trigger pulls to avoid such symptoms.

• Always test a small area to avoid chance of

damaging the surface.

OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS

Using High/Low Nozzle

• The adjustable spray nozzle had has two (2)

positions:

– IN position for high pressure spray. Twist the nozzle

counterclockwise until it stops and gap is closed.

– OUT position for low pressure spray for detergent

function. Twist the nozzle clockwise until it stops

and gap is open.

• When using the high pressure setting, twist the

nozzle head clockwise or counterclockwise to achieve

the stream desired.

• When using the low pressure setting twist the nozzle

head clockwise to open the fan blades all the way.

IN position

High Pressure Setting

Fan Spray Pencil Stream

Attach Foam Canon (stored in rear of pressure washer)

into end of lance by pressing cannon into place.It will

PDNHD´FOLFNµVRXQGZKHQÀUPO\LQSODFH

Note: Always lock spray gun when changing the foam

cannon to ensure it does not eject with force.

•:KHQXVLQJWKHIRDPFDQQRQÀOOLWZLWKDSURSHUO\

formulated detergent or cleaner with water ratio

according to instructions on the container.

• DO NOT use thick gel-like detergents as they will clog

the foam cannon and can cause damage.

• The power washer will pull a ratio of water to

detergent of 10:1 or 10 parts water to 1 part

detergent. The detergent concentration can be

adjusted by turning the detergent knob on the top of

the cannon. Turn it left for more concentration or turn

it right for less concentration.

OPERATING INSTRUCTIONSOPERATING INSTRUCTIONSOPERATING INSTRUCTIONS

Operation Tips

• Note: Test the GFCI before each use:

1. Plug GFCI into power outlet. Indicator should turn

green to show that cord has power.

2. Press test button, green indicator should turn off

to verify that GFCI cut off power to the cord.

3. Press reset button – green indicator should turn

on to show that cord has power again.

4. When GFCI is working properly, green indicator

will turn on when power is applied. If green

indicator turns off, it has detected electric

leakage and the GFCI cut off power to the

appliance.

• If you hear the motor run intermittently when the

trigger is not being squeezed, that is normal.

The pump is priming itself so it is ready to operate

when the trigger is squeezed. Turn off the power

ZDVKHULIQRWEHLQJXVHGDIWHUÀYHPLQXWHV

• The o-rings on the bayonet end of the lance should

be cleaned regularly and lubricated with non-water

soluble grease such as petroleum jelly.

• Keep the nozzle cleaning wire for use in unclogging

the nozzle. If you lose the cleaning wire, a

straightened paper clip also works.

• Use the high/low nozzle lance when cleaning

windows. Be sure to adjust the nozzle to low spray

DQGSODFHWKHQR]]OHDSSUR[LPDWHO\IRXUWRÀYHIHHW

DZD\IURPWKHZLQGRZZLWKWKHQR]]OHDWIRUW\ÀYH

degree angle. Squeeze the trigger and vary the

spray pattern and angle until optimum cleaning

HIÀFLHQF\LVDFKLHYHG

How to Avoid Damaging Surfaces

• Damage to surfaces being cleaned occurs

because the impact force of the water pressure

exceeds the durability of the surface. Bare wood

can be penetrated; paint can be peeled off, etc.

You can vary the force of your power washer by

controlling:

1. The angle of the surface being cleaned.

2. The distance of the nozzle from the surface

being cleaned.

• NEVER use a narrow high pressure stream of

water on soft surfaces susceptible to damage.

Spray

Pressure

OPERATING INSTRUCTIONSOPERATING INSTRUCTIONSOPERATING INSTRUCTIONS

Extending and Lowering Handle

• Extend the handle up by pressing the blue button in

the cord hook and pull handle up until it locks in place.

Note: If handle does not easily slide up, add some

petroleum jelly (not included) to help make it

glide easier.

• Lower the handle by pressing the center of the upper

cord hook and push down on the handle until all the

way down.

Using Power Cord

• Easily remove the power cord from side of unit by

swiveling the bottom blue cord hook to the right or

left until it faces up. The power cord then can be

easily slid off of the side of the power washer unit.

• Swivel blue cord hook back down when ready to

wrap the cord back into place for storage.

CARE AND MAINTENANCE

Detergents

• Use detergents designed for power washers. These

can be purchased online at our website www.

arblueclean.com. Hardware stores or home centers

also have power washer detergents for different

cleaning projects. The cleaning solution should be the

consistency of water in order to prevent clogging your

detergent bottle and nozzle.

• This system applies detergent under low pressure.

The cleaning power of the detergents is enhanced

when applied with low pressure and enough time is

given to break down dirt and grime. The combination

of low pressure and chemical action is very effective

and can be better than scrubbing if applied properly.

ALWAYS spray detergent on a dry surface. DO NOT

SUHVRDNDUHD:HWWLQJWKHVXUIDFHÀUVWGLOXWHVWKH

detergent and reduces its cleaning ability. DO

NOT allow detergent to dry on surface. On vertical

surfaces being cleaned, apply detergent to

lower surfaces and work your way up to prevent

detergent from causing streaks in the dirt and

grime. Rinse detergent by pressure washing from

bottom up for same reason.

• If a stain is particularly tough, it may be

necessary to reapply the detergent and use a

bristled brush to scrub the stain. Subsequent

power washing after brushing should successfully

complete your cleaning job.

OPERATING INSTRUCTIONSOPERATING INSTRUCTIONSCARE AND MAINTENANCE

Cleaning Garden Hose Adapter

• The screen inside the adapter should be cleaned

periodically. Remove it by dragging a thumb over the

screen with enough pressure to pull the screen and

washer out. Rinse it with clean water and then place

it back in the adapter.

Cleaning Nozzles

• A clogged or partially clogged nozzle can cause

VLJQLÀFDQWUHGXFWLRQRIZDWHUSUHVVXUHFRPLQJRXW

of the nozzle and/or cause the unit to pulsate while

spraying.

• Turn off the unit.

• Turn off the water supply to the unit.

• Relieve any pressure trapped in the hose by

squeezing the trigger 2-3 times, and then lock the

spray gun by pushing the lock button from left to

right.

• Remove the lance from the spray gun.

• Using the nozzle tip cleaner provided (or an unfolded

paper clip), insert the wire into the nozzle hole and

move back and forth until debris is dislodged.

• Tap quick connect end of lance on hard surface

several times.

%DFNÁXVKZDWHUWKURXJKWKHQR]]OHVXVLQJJDUGHQ

hose and highest pressure available (either standard

water nozzle or use your thumb over the nozzle to

FUHDWHZDWHUSUHVVXUHIRUEDFNÁXVK

Storage

• When your pressure washer session has been

completed, turn off the power switch located on the

front of the power washer. Unplug the power cord

from the outlet. Turn off the water supply. Pull the

trigger on the spray gun 2-3 times to drain out the

excess water and to release any remaining water

pressure. Disconnect the garden hose adapter from

the water inlet. DO NOT allow the power washer to

UXQZLWKQRZDWHUÁRZLQJWKURXJKLW

• Remove high pressure hose from spray gun.

• Remove lance from the gun. Place the gun in the

holster on the side. Lances are placed into any of

the slots in the back of the unit.

• Make sure to discard any remaining detergent

from the bottle. Residual chemical will stick to the

container which could become cotaminated, and

can cause the detergent injector to clog and not

function properly. Flush the bottle and nozzle head

with fresh water to prevent clogging.

• Hook the power cord around the cord hook on the

right side of the machine when facing it.

• The pressure hose is stored on the hose hook

located on the back of the handle.

• DO NOT store the power washer where it is

exposed to freezing temperatures unless you use

an antifreeze designed for pumps. Store the power

washer indoors to prevent the water in the unit from

expanding under freezing conditions. When the

water freezes and expands, your power washer will

be damaged and become inoperable. Or, if storing

outdoors, it is recommended you use pump saver

(not included) to protect pumps.

PUMP SAVER

Pump Saver is a product that protects and prolongs the

life of the pump. This will keep the internal parts of the

pump lubricated and protected from freezing while being

stored in ALL climates. It also assists with protection from

internal corrosion. The Blue Clean part # is: PW64511

(16oz. bottle). Order online at www.arblueclean.com

Pump Saver Instructions

Follow the previous storage instructions for your power

washer. To prevent staining, protect the surface under

WKHSRZHUZDVKHUIURPDQ\H[FHVVÁXLG:HDUH\H

protection when using this product.

CARE AND MAINTENANCE

PUMP SAVER

PROBLEM CORRECTIVE ACTION

Unit will not turn on. 1. The GFCI module on the end of the power cord must be plugged directly into an outlet.

2. Do not use an extension cord.

3. With the GFCI Connected make sure the power switch is turned on.

Note: When power switch is turned on, the power washer will turn on by itself for 1-2

seconds and shut off. This is normal.

The high pressure (HP)

hose will not connect/

stay connected to the

spray gun. Is this a

spray gun problem?

1. In most cases, the spray gun is not the problem. The problem is the rubber sleeve

FRYHULQJWKHÀWWLQJDWWKHHQGRIWKHKLJKSUHVVXUHKRVH,WKDVOLNHO\VOLSSHGXSWRZDUG

WKHPHWDOWLS7RÀ[ZLJJOHWZLVWDQGRUSXOOWKHUXEEHUVOHHYHGRZQXQWLOWKHHQWLUHWLS

LVYLVLEOHSOXVDQLQRIWKHPHWDOÀWWLQJEHORZWKHWLS1RZWU\WRLQVHUWWKHKRVHWLS

into the spray gun. It should “click” into place and will not come out until the hose is

released by pushing in the lever on the underside of the gun. You may cut away the end

of the sleeve with a sharp knife if unable to move the sleeve down. Be careful not to cut

or puncture the hose.

2. Do not push in the release button when connecting the high pressure hose.

The unit is running but

WKHUHLVQRZDWHUÁRZ

1. Power should NOT be turned on until water comes through the spray gun. Doing so will

damage the motor.

2. Check the water source.

3. Eject the nozzle from the lance to determine if clog is coming from the nozzle (If nozzle

is clogged, see nozzle cleaning instructions under “Cleaning nozzles”).

4. Take off the lance and just spray out of the spray gun. This will indicate if the problem is

with the lance.

&KHFN*DUGHQ+RVH$GDSWHUIRUORRVHFRQQHFWLRQDQGWKHÀOWHUIRUGHEULV

TROUBLESHOOTING

If you have any questions regarding the product, please call customer service at 1-866-235-5112

Turn unit off and disconnect the gun before adding

pump protector. Unscrew threaded top from bottle to

remove seal and reattach threaded top to bottle.

Remove black cap from bottle.

1) Place top of pump saver bottle onto the garden

hose adapter.

2) Secure pump saver bottle by turning in a clockwise

direction.

3) Turn the power on.

4) Squeeze bottle to help it into the pump.

5) Turn power off when pump saver exits the machine’s

water outlet.

Note: Instructions on Pump Saver Bottle are generic and

QRWPRGHOVSHFLÀF

CARE AND MAINTENANCE

TROUBLESHOOTING

PROBLEM CORRECTIVE ACTION

Why is water leaking

where the high

pressure hose

connects to the spray

gun?

1. Make sure there is an o-ring at the end of the metal tip of the high pressure hose. If

no o-ring is present, the connection between the hose and spray gun will leak. O-Ring

Replacement Kit (K) is included with purchase. Additional O-Ring Kits are available

online at www.arblueclean.com or call Customer Service at 1-866-235-5112 to place

an order.

I can’t remove the

lance from the spray

gun. What should I

do?

1. All lances and the detergent bottles are attached and removed from the extension

lance in the same manner. Insert the quick-release end of the lance/detergent bottle

into the extension lance. Press the extension lance and lance together (about a 1/8”)

and turn clockwise. The lance will lock in place. Remove the lance by reversing this

procedure. Press the extension lance and lance together and turn counter clockwise.

The lance will slide out.

2. Or, hold the extension lance and lance in an upright position with the nozzle end on

WKHÁRRU3XVKWKHZKROHDVVHPEO\VWUDLJKWGRZQWRORRVHQWKHFRQQHFWLRQDQGWKHQ

follow the removal process again. You may also spray soapy water or a lubricant in the

area where the lance connects to the extension lance.

The power washer

turns on for

2 seconds, shuts

off, and will not turn

back on. Do I have a

defective unit?

,WVRXQGVOLNH\RXUSRZHUZDVKHULVZRUNLQJMXVWÀQH:KHQWKHZDWHULVFRQQHFWHG

the accessories are assembled properly, and the power switch is turned on, the power

washer may turn on for 1 - 2 seconds to prime the pump. It automatically shuts off and

waits for the spray gun trigger to be pressed. When the trigger is pressed, water starts

ÁRZLQJWKURXJKWKHSXPS7KHZDWHUVHQVRULQWKHSXPS´VHQVHVµWKHPRYLQJZDWHU

and automatically turns the power washer on.

2. Turn the power switch to off, hold in the trigger on the spray gun, so that you have a

steady stream of water. While you are holding the trigger open on the spray gun, at the

same time, turn the power switch on.

LIMITED WARRANTY

The Warranty of this product is coverd by A.R.North America.

This product is under warranty to the original retail consumer against defects in material and workmanship for a

period of 1 (one) year and is a complete “bumper to bumper” warranty including the spray gun, the high pressure

hose and all accessories from the date of purchase. The warranty is not transferable or assignable. This warranty

covers replacement parts. This limited one year warranty applies only to products used in consumer applications

and is void in rental or any commercial application. Reasonable care must be used in conformity with operation

and maintenance instructions in the owner’s manual. Failure to follow these instructions will void this warranty. This

warranty gives you special legal rights and you may also have other rights which vary from state to state.

Warranty Process

Keep your original receipt of purchase in case of warranty claim.

If your power washer develops a problem, contact Customer Service:

• Call our toll-free number at 1-866-235-5112. Customer Service is available Monday - Friday, 8:00 a.m. - 5:00 p.m.

&HQWUDO6WDQGDUG7LPH&67$&XVWRPHU6HUYLFHUHSUHVHQWLWLYHZLOOZRUNZLWK\RXWRÀ[WKHSUREOHP

If the power washer needs to be returned for repair, shipping costs must be paid by the customer. A Return

Merchandise Authorization (RMA) Number will be issued for the return. Upon receiving the power washer, the

CARE AND MAINTENANCE

TROUBLESHOOTING

LIMITED WARRANTY

REPLACEMENT PARTS LIST

Printed in China

For replacement parts, call our customer service department at 1-866-235-5112, 8 a.m. - 5:00 p.m., CST,

Monday - Friday or order online at www.arblueclean.com

PART DESCRIPTION PART #

E Nozzle Tray PW4220050

F Garden Hose Adapter PW4221570

G GFCI Assembly PW4221160

H O-Ring Kit PW9091850

I Gun Holster PW4220040

PART DESCRIPTION PART #

A High Pressure Foam

Cannon (28 oz.)

PW4620712

B Super Soft Hose PW4222200

C Spray Gun PW50968

D High/Low Nozzle Lance PW4220010

PW9091850

company will repair or replace the unit. We will send unit back to customer at no charge.

Please note: Power washers sent to the company without an RMA Number will NOT be accepted and will be

shipped back at the expense of the sender.

AR Blue Clean 1850 PSI Electric Pressure Washer Mode d'emploi

Marque: AR Blue Clean

Modèle: 1850 PSI Electric Pressure Washer

Catégorie: Nettoyeurs haute pression

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: AR Blue Clean 1850 PSI Electric Pressure Washer Operating instructions

Documents connexes

Blue Clean BC111HS Le manuel du propriétaire

AR Blue Clean 1850 PSI Electric Pressure Washer Mode d'emploi

AR Blue Clean 1850 PSI Electric Pressure Washer Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents