Salto AF0B Le manuel du propriétaire

Marque: Salto

Modèle: AF0B

Taper: Le manuel du propriétaire



SALTO SYSTEMS S.L. www.saltosystems.com 1/3 226184-ED.4-21/06/2022

Pol. Lanbarren, c/Arkotz nº9, 20180 Oiartzun, Spain.

All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials

Compliance

PRODUCTS DESCRIPTION

PRODUCT TECHNOLOGY SOFTWARE

COMMERCIAL

NAME MODEL

RFID

13.56MHz

Output max.

power

BLUETOOTH LE

2400–2483.5 MHz

Output max. power

IEEE802.15.4

2400–2483.5

MHz

Output max.

power

CONTROL

CIRCUIT

MOTOR

CIRCUIT

Bluetooth

MODULE

RF2

MODULE

SoC

FUS

Bluetooth

Stack

Ælement Fusion

E1723

AF0B +24 dBm +8 dBm 0141 0136

AF0J +24 dBm +8 dBm 0145 0136

AF0M +24 dBm +8 dBm 0177 0184

AF0D +24 dBm +8 dBm, +2.8 dBm 0146 0136, --

Ælement

Original

E1009

AE9 +20 dBm 0106

AE9W +20 dBm +5 dBm 0106/0062 0038

AEB +20 dBm +8 dBm 0135 0136

AEJ +20 dBm +8 dBm 0147 0136

AE0M +20 dBm +8 dBm 0178 0184

AES +20 dBm +2.8 dBm 0139 --

XS4 One+

E1722

E97 +23 dBm 0128 0000

EB7 +23 dBm +8 dBm 0134 0000 0136

EM07 +22 dBm +6 dBm 0196 0000 0186 0187

EM17 +22 dBm +6 dBm 0196 0000 0186 0187

EJ7 +23 dBm +8 dBm 0150 0000 0136

XS4 mini ANSI

E1721

CB2 +23 dBm +8 dBm 0175 0000 0184

C20M +23 dBm +6 dBm 0196 0000 0186 0187

CJ2 +23 dBm +8 dBm 0150 0000 0136

SALTO DBolt

E2133

DM0M +22 dBm +6 dBm 0190 0179 0186 0187

DZ0M +22 dBm +6 dBm 0190 0209 0186 0187

PPD

A0101 PPD800 -- 0109

EU DECLARATION OF CONFORMITY

EN Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain), declares that this access control equipment is in compliance

with the essential requirements and other relevant provisions of Directive 2014/53/EU (RED) and 2011/65/EU (RoHS). You will be able to find a copy

of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate

ES Por medio de la presente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain) declara que este equipo de control de

accesos cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/UE (RED) y

2011/65/UE (RoHS). Podrá encontrar una copia de la declaración de conformidad original en la siguiente dirección de internet:

https://www.saltosystems.com/certificate

FR Par la présente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain) déclare que l’appareil équipement pour le contrôle

d’accès est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/UE (RED) et 2011/65/UE (RoHS).

Vous pouvez télécharger une copie de la déclaration de conformité originale à travers l’adresse suivante: https://www.saltosystems.com/certificate

DE Hiermit erklärt SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9-20180 Oiartzun-Spain) dass sich das Gerät Zutrittskontrollgeräte im

Übereinstimmung mit den grundlegendenAnforderungen und den übrigen einschlägigen Bestimmungen derRichtlinie 2014/53/EU (RED) befindet und

2011/65/EU (RoHS). Eine Kopie der originalen Konformitätserklärung finden Sie auf der folgenden Internetseite:

https://www.saltosystems.com/certificate

NL Hierbij verklaart SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain) dat het toestel toegangscontroleapparatuur in

overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 2014/53/EU (RED) en 2011/65/EU (RoHS). U kunt een

kopie van de originele verklaring van overeenstemming vinden op het volgende internetadres: https://www.saltosystems.com/certificate

PT A SALTO Systems S.L. declara que este equipamento de controlo de acessos está conforme os requisitos essenciais e outras disposições da Diretiva

2014/53/UE (RED) e 2011/65/EU (RoHS). Poderá encontrar uma cópia da declaração de conformidade original na seguinte direção de internet:

https://www.saltosystems.com/certificate

UKCA DECLARATION OF CONFORMITY

Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain), declares that this access control equipment is in compliance

with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 and RoHS Regulation 2012. You will be able

to find a copy of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate

UK importer contact information:

Salto Systems, Ltd. Unit 1, The Court Holywell Business Park, Northfield Road, CV47 0FS Southam, UK.

ELECTRICAL WARNINGS

Caution:

‐ Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

‐ Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.

‐ Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.

‐ A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

Distance between this device and human body must be higher than 20 cm.



SALTO SYSTEMS S.L. www.saltosystems.com 2/3 226184-ED.4-21/06/2022

Pol. Lanbarren, c/Arkotz nº9, 20180 Oiartzun, Spain.

All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials

Compliance

Attention:

‐ Risque d'explosion si la pile est remplacée par un type de pile inadéquat. Jetez les piles usagées conformément aux instructions.

‐ La destruction d'une pile par le feu ou dans un four à haute température, le broyage ou encore son découpage mécanique peut entraîner une explosion.

‐ Laisser une pile dans un environnement où la température est extrêmement élevée peut entraîner une explosion, une fuite de liquide ou de gaz inflamable.

‐ Une pile soumise à une pression d'air extrêmement faible peut entraîner une explosion, ou la fuite d'un liquide ou d'un gaz inflammable.

La distance entre cet appareil et le corps humain doit être supérieure à 20 cm.

Recommended batteries:

 Duracell Plus Power (AAA) LR03 MN2400



Duracell Plus Power (AA) LR6 MN1500

 Duracell Ultra Power (AAA) LR03 MX2400



Varta Industrial (AA) LR6 04006

 Varta Industrial (AAA) LR03 04003



Varta High Energy (AA) LR6 04906

 Varta High Energy (AAA) LR03 04903



Varta Max Tech (AA) LR6 MN1500

 Varta Max Tech (AAA) LR03 MN2400

 Duracell Ultra Power (AAA) LR03 MX1500

MECHANICAL WARNINGS

In order to confirm the correct operation of this electronic device, SALTO recommends using it in combination with a lock destined for that use (door mass,

frequency of use, fire door, etc.) and that is in good operational conditions. Polished finishes are strongly recommended in seaside environments for a

better performance and durability. The environmental conditions mentioned in the data sheets are always referred to non-condensation situations. The

Biocote and IA finishes are painted and sharp objects such as rings or metallic key rings or other metallic objects should be avoided during any cleaning

process. The SALTO product should be treated with care during the installation process to avoid any aggressive contact that may damage the unit. It may

be necessary to loosen the trims mounting during installation. Do not bring the device into contact with oil, paints or acids. Do not paint the door with the

mortise lock or electronic device already mounted on the door. CLEANING THE ELECTRONIC DEVICE: a damp cloth with mild soapy water can be used.

Never use abrasive soaps or sprays. The black chromium finish (“NE” code) is coated with a protective oil that improves the product conservation. Its

presence may increase the appearance of fingerprint traces after the needed product handling. Thus, no cleaning processes are applied at the origin to

avoid removing the protective layer. SALTO recommends cleaning the product surfaces with a damp cloth after its manipulation when the installation is

finished. For best performance, stainless steel should be cleaned regularly. Note that when the door is closed without the lock having been already

programmed, the lock will automatically lock and can only be opened with a Portable Programing Device (PPD). If you have questions or doubts on this,

please contact your authorized SALTO supplier.

LEGAL WARNINGS

The user shall be responsible for the correct use and maintenance of the access control equipment according to the instructions herein. SALTO shall not

be responsible for any defect, malfunction, loss or damage, whether direct or indirect, caused by or arisen from any improper installation or utilization of

the equipment or which contravenes, transgresses or infringes in any manner the above mentioned instructions. SALTO’s liability concerning the

equipment is limited to the warranty provided. The warranty does not cover product failures due to repairs, modifications or product manipulations

performed in the access control equipment or in the inner electromechanical structure by anyone other than authorized SALTO dealers or personnel.

FCC COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not

expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This product is a radio transmitter and receiver to be used in mobile conditions.

Supplier's Declaration of Conformity

47 CFR § 2.1077 Compliance Information

We, SALTO Systems, S.L., hereby declare that the equipment bearing the model number specified above was tested conforming to the applicable FCC Rules.

Responsible Party – U.S. Contact Information

Salto Systems Inc. USA. 1780 Corporate Drive, Suite 400. Norcross, GA. 30093. n.buffington@saltosystems.com

ISED COMPLIANCE STATEMENT

This device complies with Industry Canada license-exempt RSS standards(s). Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes

or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux

conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to ICES-003.

IMDA COMPLIANCE LABEL [1]



SALTO SYSTEMS S.L. www.saltosystems.com 3/3 226184-ED.4-21/06/2022

Pol. Lanbarren, c/Arkotz nº9, 20180 Oiartzun, Spain.

All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials

Compliance

NCC WARNING STATEMENT / NCC 警語要求 [2]

取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之使用不

得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前述合法通信，指依電信管理法規定作業之無線

電通信。低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

Legend: Remarks:

[1] IMDA Not applicable for models, AE9, AE9W, E97, PPD800

[2] NCC Not applicable for models AF0M, AF0D, AE9, AE9W, AE0M, AES, E97, EM07, EM17, C20M, DM0M, DZ0M, PPD800