Jensen Car Video System VM9413 Manuel utilisateur

Featuring:

DVD, CD, MP3, WMA, USB and SD Playback

Touch Screen Interface

4

MediaLink A/V Input

Front Panel SD input

Composite Video Out

Remote Control

Navigation Ready (NAV102 Only)

Bluetooth Ready (Requires BTM10)

VM9413 Quick

Reference Guide

Press Audio

VM9413

Enter

MUTE

NAV

INT

RPT

BAND ASOPEN DISP

Navigation operation requires NAV102

installation

Bluetooth operation requires BTM10

installation

Rear Camera operation requires rear camera

installation

Anti-Theft Feature

Entering the Default Password

The VM9413 is equipped with an anti-theft feature requiring the user to enter a

password upon initial power on.

The default user password is 012345 (6 digits). Enter the password using the on-

screen keypad and then press the Enter (arrow) button. You can also use the remote

control keypad to enter the password.

1

2

3

4

5

6

7

8

9

0

Enter Password:

Changing the Password

To change the anti-theft and RATINGS protection password,perform the following

steps:

1. Press the SETUP button on the remote control or touch the button on the

screen to enter the “SETUP” menu.

2. Touch RATING to view the “RATING” sub-menu. An open lock icon to the right of

the “Password” field indicates that a user password had not yet been entered.

3. Touch the keypad icon next to the blue box in the “Password” field to open the

on-screen keypad.

4. Enter a new 6-digit password and press the Enter (arrow) button.

The "lock" icon will now appear closed and the new anti-theft password will be

set, as well as the password for RATING protection.

NOTE: If you forget your password, contact Customer Service at 1-800-323-4815 for

assistance.

RADIO

SETUP

RDS

Rating

Hardware

P.VOL

TS Cal

General

Language

Audio

Back

Password

Rating 8. Adult

Load Factory Reset

Speaker

Demo

Bluetooth

02:40 AM

1

2

3

4

5

6

7

8

9

0

Clear

Controls and Indicators

1. Press to turn the unit on. Press and hold to turn the unit off.

Press repeatedly to select playing mode.

2. Turn to adjust the volume.

Press and hold to access audio menu. While in menu, press repeatedly to view

audio settings.

3. Press to mute audio. Press again to resume previous volume.

4. Insert disc for automatic playback.

5. Press to eject disc.

Press and hold to reset core mechanism position.

6. Press to change the AM, FM or SAT band.

7. Press to play the previous chapter/track or auto-search the previous available

radio station. In menu mode, press to move the cursor to the left.

8. Press to access the next chapter or track or auto-search the next available radio

station. In menu mode, press to move the cursor to the right.

9. Press to cycle through information available on the LCD or TFT screen. In DVD

Mode, press to view the top and bottom information bars. Press again to turn

“Display Off”.

16

8

15

19

5

3

1

20

11

s Audio

Enter

2

Pr e s

13

7

17

OPEN DISP

BAND

AS

10

4

3

6

14

9

18

12

NAV

INT

VM9413

10. View playback information on secondary LCD.

11. Point remote control at IR Receiver to control functions.

12. Insert SD card for playback of media files through the radio.

13. Use thin metallic object to depress RESET button and restore factory default

settings.

14. Press to open TFT screen.

15. Press to pause or resume playback or to confirm current selection.

16. Press to fast forward/fast reverse disc or tune up one frequency step in tuner

mode. In menu mode, press to move the cursor up.

17. Press to slow forward/slow reverse disc or tune down one frequency step in tuner

mode. In menu mode, press to move the cursor down.

18. When the NAV102 is connected to the head unit, press to display the navigation

user interface. The TFT screen must be open for this function to operate.

19. Press to control intro playback function.

20. Press to control repeat playback function.

Controls and Indicators (continued)

BAND

CLOSE

ASDISP

Multimedia Receiver

21

22

24

25

23

s Audio

Enter

Pres

VM9413

ANGLE / TILT

PICTURE

NAV INT

21. Touch the TFT screen to control head unit functions.

22. Press to close the TFT screen.

23. Press once to adjust the downward tilt angle of the screen one step at a time or

press and hold to adjust the angle in a continuous motion.

24. Press once to adjust the upward tilt angle of the screen one step at a time or

press and hold to adjust the angle in a continuous motion.

25. Press to adjust the display aspect ratio of the picture to one of three settings:

Full, Normal or Standby.

Press and hold to adjust the Brightness and Contrast. Press the volume control

to move between Brightness and Contrast. Turn the rotary encoder to adjust the

setting for the selected option.

Common User Settings

Audio Control Menu

Touch the EQ button on the left side of the screen to access the Audio Control Menu,

shown below.

1. Use the touchscreen or the left/right joystick buttons on the unit or remote control

to highlight the audio feature to be adjusted.

2. Touch the screen or press the joystick enter button to select the highlighted

option.

3. Touch the +/– buttons on the screen or use the joystick to adjust the selected

feature to the desired setting.

Touch the "FAD-BAL"

button to access a

second screen with the

Balance/Fader

settings.

Use the arrows on

either side of the box

where "User" is

selected, to choose a

preset equalizer level.

NOTE

The EQ mode will automatically change to “USER” when individual

audio functions are adjusted.

EQ: User

E

Q

T

A

G

+12 —

0 —

–12 —

80 250 600 1k 4k 10k 16k

FAD-BAL EQ

USER

BACK

Set Clock

The clock appears in the top right corner of the screen and on the LCD screen during

certain operations.

To set the clock, you must first press the button on the screen to access the SETUP

menu.

1. Use the touch screen or joystick to select the Clock option.

2. Use the touch screen or press the joystick enter button to access the adjustment

field.

3. Select a new value using the touch screen or left/right joystick buttons. The

AM/PM indication will change as you continue to adjust the hour past 12.

4. Use the touch screen or press the joystick enter button to confirm and exit the

SETUP menu.

RADIO

SETUP

Rating

Bluetooth

Hardware

DEMO

P.VOL

TS Cal

General Language

Audio Back

Clock Mode 12Hr

Clock 04 : 31 AM

Tuner Region USA

Beep On

Touch the menu titles

across the left and

top of the menu to

see highlighted sub-

menu options in the

center of the screen.

Touch the menu

option you want to

adjust, then use the

touch screen to

adjust the setting.

1. Current radio band indicator

2. Radio frequency indicator

3. Clock display

4. Radio station name (call letters)

5. Tuning mode indicator (local/distant)

6. Touch to recall preset stations.

7. Program Information: Title, Artist, Type

NOTE: The amount of information displayed when

receiving an HD Radio signal is dependent upon

what is being broadcast. Some stations broadcast

their call letters (name), the artist's name, song title,

and category of music.

Tuner User Interface

9

11

17

13

FM: _ _ _ . _ MHz

1

2

3

4

5

6

7

8

9

0

Clear

Exit

Direct Entry Screen

4

1

2

7

8

3

16

RADIO

FM 101.9 MHz HD-1

01:02 PM

P1 87.5 MHz

P2 90.1 MHz

P3 98.1 MHz

P4 106.1 MHz

P5 107.9 MHz

P6 102.9 MHz

Info: Soft Rock & Roll of Yesterday

WJHM-FM

Auto HD

5

10

22

12

14

15

BAND

1/2

AS

18

23

19

20

PROG

2/2

A/D

21

MEM MEM

6

24

E

Q

T

A

G

8. Touch for quick access to Equalizer level settings.

9. Touch to access the Direct Entry Screen. Enter the desired frequency and then

touch the button. You can also press GOTO on the remote control to access

the Direct Entry Screen.

10. HD Radio band indicator

11. |<<: Touch to seek backward.

12. >>|: Touch to seek forward.

13. <<: Touch to tune backward one step.

14. >>: Touch to tune forward one step.

15. BAND: Touch to change bands.

16. Touch to view the SOURCE MENU and select a new playback source. You can

also change the source by pressing the SRC button on the control panel or

remote control.

17. MEM: View screen used to enter current channel into preset memory. Touch P1 -

P6 to store or Exit to leave the screen.

18. 1/2 or 2/2: Touch this page button to view a second page of on-screen buttons.

NOTE: In AM mode, there is only one page of on-screen button options. The

PROG button is not visible since Multicast channels are not available for AM

stations.

19. View SETUP menu.

20. PROG: Touch to view the HD Radio Multicast channel display

21. A/D: Touch to select Auto, Analog or Digital tuning mode.

22. HD Radio Signal Indicator.

23. Auto memory scan.

24. TAG: Touch to perform iTunes tagging for current song.

®

The VM9413 offers iTunes Tagging, which allows the user to "Tag" songs playing on

HD Radio™ stations for purchase later through iTunes. When the onscreen TAG

button is touched, the unit stores the title and artist song information that can then be

4

transferred to your iPod when connected to the MediaLink . A list titled "Tagged" will

appear in iTunes, allowing you the option to purchase your tagged songs.

iPod Compatibility

Models supported, but not limited to, include the following

iPod nano 4G

iPod Classic

iPod Touch

iPod 5G

iPod nano 3G

Tagging Music

1. Tune to an HD Radio station.

2. Touch the onscreen TAG button or press the MENU/TAG button on the remote

control. “Adding Tag...” will appear in the display. The song information is saved

to the VM9413 memory until an iPod is connected. You can tag up to 64 songs

before the tags must be transferred to an iPod or deleted.

iTunes Tagging

®

Tag Message

Storing Tag...

Tag Stored ## of 64

## Tag(s) Sent

Memory full, Connect iPod

Insufficient Tag Data

Tag transfer failed

iPod full, Tag cannot be stored

Tagging not supported

Reason

TAG button is pressed

Successful storage of tag

Tag(s) successfully transferred

Tag storage is full

Tag data is not available

Tag transfer failed

iPod memory is full

Unsupported iPod is connected

Downloading Tags to your iPod

3

To download tags to your iPod, plug an iPod into the iPod jLink and then into the

4

MediaLink iPod connector. All existing tags are automatically transferred to the iPod

and deleted from the head unit's memory. If an iPod is connected when a song is

tagged, the Tag will be immediately transferred to the iPod.

NOTE

When transferring Tags to an iPod, the VM9413 must remain in

Radio mode until the “## Tag(s) Sent” message is displayed. To

purchase tagged songs, you must sync your iPod to iTunes and

then click the "Tagged" list on the left side of the iTunes software

screen. Click the "view" button for purchasing information.

CD/DVD Audio Operation

1. Current track and total number of tracks on disc

2. Elapsed playing time

3. Disc title

4. Track titles (if available on disc)

5. ID3 information

6. /||: Touch to play/pause disc playback.

7. : Touch to stop disc playback.

8. >>|: Touch to move to next track.

9. |<<: Touch to move to previous track.

10. >>: Touch to fast forward current track.

11. <<: Touch to rewind current track.

12. Touch to activate/deactivate Random mode.

The VM9413 will play

music or other audio

files from the following

disc media:

CD-DA

CD-R/RW

DVD

DVD+R/RW

DVD-R/RW

CD-R and CD-RW will

not play unless the

recording session is

finalized.

15

1

7

2

12

5

16

13

3

17

DISC

CD 1/10 01:23 04:31

01:02

1 Track 01

2 Track 02

3 Track 03

4 Track 04

5 Track 05

6 Track 06

14

4

9

11

10

8

6

18

Audio CD

19

E

Q

13. Touch to activate/deactivate Repeat play mode.

14. Touch to access the direct entry screen.

15. : Touch to view the SETUP menu.

16. Touch for quick access to Equalizer level settings.

17. Touch to view the SOURCE MENU and select a new playback source.

18. Touch the scroll bar and arrows to view the previous/ next page of songs.

19. Current time

NOTE

During disc play, press the INT button on the remote control to play

the first 10 seconds of each track. When a desired track is reached,

press the INT button again to play the selected track.

CD/DVD Video Operation

A

B

A – Displays

playback

information

B – Displays

on-screen

control menu

TOUCH SCREEN CONTROL AREAS

Touch inside the outlined areas (A and B)

for playback information and controls.

DVD T : 5/8 C : 2/16 00:41:28 2/6 Eng

VCD 2.0 T : 6/18 00:41:28

DVD Display Info "

VCD Display Info "

T : 5/8 – “5/8" indicates the fifth of 8 titles on the DVD is currently playing.

C : 2/16 – “2/16" indicates that the second of 16 chapters/tracks on the disc is

currently playing.

00:41:28 – “00:41:28” indicates the playback time of the current title/track.

 2/6 Eng – The language display information indicates the second language

out of 6 (English) is currently being used.

VCD 2.0 – Format of current disc.

To access the on-screen controls, touch the bottom 1/3 of the screen (section B).

Touch the 1/2 button to view a second page of controls.

1/2

BACK

MENU

2/2

BACK

DISP

EQ

AUDIO

A-B

TITLE

SUBTITLE

Access the direct entry screen

Access the SETUP menu

Exit on-screen control menu

Rewind/Fast Forward

Previous/Next track or title

Play/Pause

Stop playback

View second page of on-screen controls

Access DVD Main Menu

Adjust Equalizer settings

Change audio language for disc playback

Repeat play current track/chapter

Press to select beginning repeat point. Press again

to select end repeat point. Press again to stop.

Select language for subtitles

Select different title for playback

View first page of on-screen controls

Display playback information

SAT

SAT1 CH001

01:02

CG

BAND

MEM

DIAG

P1 XM Preview

P2 XM Preview

P3 XM Preview

P4 XM Preview

P5 XM Preview

P6 XM Preview

Title: Fridays XM144!

XM Preview Preview

CAT

+

CAT

-

CHCH

+

-

10

11

12

13

14

15

18

4

3 21

5

16

17

6

7

8

9

19

20

E

Q

Satellite Radio Operation

®

Listeners can subscribe to XM Radio on the Web by visiting www.xmradio.com, or by

calling (800) 967-2346. Customers should have their Radio ID ready. Customers can

receive a limited number of free-to-air channels without activation.

1. SAT channel name

2. SAT channel number

3. SAT band

4. Time

5. Song title

6. Artist name

7. Song category

La page charge ...

Jensen Car Video System VM9413 Manuel utilisateur

Jensen Car Video System VM9413 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents