Jensen Car Video System VM9313 Manuel utilisateur

Featuring:

DVD, CD, MP3, WMA and USB Playback

Touch Screen Interface

RCA and Front Panel A/V Input

USB Connector

Composite Video Out

Remote Control

Navigation Ready (NAV102 Only)

Bluetooth Ready (Requires BTM10)

VM9313 Quick

Reference Guide

VM9313

A

/

V

INPUT

DISP

Navigation operation requires NAV102

installation

Bluetooth operation requires BTM10

installation

Rear Camera operation requires rear camera

installation

VM9313

A / V

INPUT

DISP

3

13

4

8

1

2

12 11

10

7

Controls and Indicators

7

6

14

5

1. Press to turn the unit on. Press and hold to turn the unit off.

Press repeatedly to select playing mode.

2. Tournez pour ajuster le volume.

Press and hold to access audio menu. While in menu, press repeatedly to view

audio settings.

Press to mute audio. Press again to resume previous volume.

3. Insert disc for automatic playback.

4. Press to eject disc.

Press and hold to reset core mechanism position.

5. With the monitor closed, press to change the AM or FM band.

6. Press to play the previous chapter/track or auto-search the previous available

radio station.

7. Press to access the next chapter or track or auto-search the next available radio

station.

8. With the monitor closed, press to cycle through information available on the

secondary LCD screen.

9. View playback information on secondary LCD.

10. Point remote control at IR Receiver to control functions.

11. Insert A/V cable connected to a portable media device for playback through the

radio.

12. Insert USB device for playback of media files through the radio.

13. Use thin metallic object to depress RESET button and restore factory default

settings.

14. Press to open TFT screen.

VM9313

A / V

INPUT

DISP

CLOSE

PIC

WIDE TILT

160

WATTS

Multimedia Receiver

15

Controls and Indicators (continued)

19

18

16

17

15. Touch the TFT screen to control head unit functions.

16. Press to close the TFT screen.

17. Press to adjust the Brightness and Contrast. Press the volume control to move

between Brightness and Contrast. Turn the rotary encoder to adjust the setting

for the selected option.

18. Press to adjust the display aspect ratio of the picture to one of three settings:

Full, Normal or Standby.

19. Press to activate the tilt function. Use the rotary encoder to adjust the angle of

the screen while the yellow tilt icon is flashing. You can also adjust the title using

the TILT and buttons on the remote control. Press once to adjust the

downward tilt angle of the screen one step at a time or press and hold to adjust

the angle in a continuous motion.

Common User Settings

Audio Control Menu

Touch the EQ button on the right side of the screen to access the Audio Control Menu,

shown below.

1. Use the touchscreen, or press the (>>|)/(|<<) buttons on the remote control to

highlight the audio feature to be adjusted.

2. Touch the screen to select the highlighted option.

3. Touch the +/– buttons on the screen or press the |<<, >>|, >>, or << buttons on

the remote control to adjust the selected feature to the desired setting.

+14 — 0 —

0 — —

–14 — –14 —

EQ

User

FAD BAL

BASS MID TREB SUB

User

F

R

L

The "FAD-BAL"

portion of the

screen uses a

grid control.

Touch inside the

box to move the

cursor and

adjust the Fader

and Balance

level from Front

to Rear and Left

to Right.

NOTE

The EQ mode will automatically change to “USER” when individual

audio functions are adjusted.

Set Clock

The clock appears in the top right corner of the screen and on the LCD screen during

certain operations.

To set the clock, you must first press the button on the screen to access the SETUP

menu.

1. Use the touch screen or directional buttons on the remote control to select the

Clock option.

2. Use the touch screen or press the >/|| button on the remote control to enter the

adjustment field.

3. Select a new value using the touch screen or >> and << buttons on the remote

control. The AM/PM indication will change as you continue to adjust the hour past

12.

4. Use the touch screen or press >/|| to confirm and exit the SETUP menu.

RADIO

SETUP

Rating

Bluetooth

Hardware

DEMO

P.VOL

TS Cal

General Language

Audio Back

Clock Mode 12Hr

Clock 04 : 31 AM

Tuner Region USA

Beep On

Touch the menu titles

across the left and

top of the menu to

see highlighted sub-

menu options in the

center of the screen.

Touch the menu

option you want to

adjust and use the

touch screen to

adjust the setting.

1. Current radio band indicator

2. Radio frequency indicator

3. Clock display

4. Radio station name (call letters)

5. Tuning mode indicator (local/distant)

6. Touch to recall preset stations.

7. Program Information: Title, Artist, Type

NOTE: The amount of information displayed when

receiving an HD Radio signal is dependent upon

what is being broadcast. Some stations broadcast

their call letters (name), the artist's name, song title,

and category of music.

Tuner User Interface

9

11

13

FM: _ _ _ . _ MHz

1

2

3

4

5

6

7

8

9

0

Clear

Exit

Direct Entry Screen

4

1

2

7

8

3

6

16

RADIO

FM 101.9 MHz HD-1

01:02 PM

E

Q

P1 87.5 MHz

P2 90.1 MHz

P3 98.1 MHz

P4 106.1 MHz

P5 107.9 MHz

P6 102.9 MHz

Info: Soft Rock & Roll of Yesterday

WJHM-FM

Auto HD

5

10

22

12

14

15

BAND

1/2

MEM

18

17

19

20

PROG

2/2

A/D

21

8. Touch for quick access to Equalizer level settings.

9. Touch to access the Direct Entry Screen. Enter the desired frequency and then

touch the button. You can also press GOTO on the remote control to access

the Direct Entry Screen.

10. HD Radio band indicator

11. |<<: Touch to seek backward.

12. >>|: Touch to seek forward.

13. <<: Touch to tune backward one step.

14. >>: Touch to tune forward one step.

15. BAND: Touch to change bands.

16. Touch to view the SOURCE MENU and select a new playback source. You can

also change the source by pressing the SRC button on the control panel or

remote control.

17. MEM: View screen used to enter current channel into preset memory. Touch P1 -

P6 to store or Exit to leave the screen.

18. 1/2 or 2/2: Touch this page button to view a second page of on-screen buttons.

NOTE: In AM mode, there is only one page of on-screen button options. The

PROG button is not visible since Multicast channels are not available for AM

stations.

19. View SETUP menu.

20. PROG: Touch to view the HD Radio Multicast channel display

21. A/D: Touch to select Auto, Analog or Digital tuning mode.

22. HD Radio Signal Indicator.

NOTE

The BAND button on the unit only works when the TFT is closed.

CD/DVD Audio Operation

1. Current track and total number of tracks on disc

2. Elapsed playing time

3. Current time

4. Track titles (if available on disc)

5. Touch to view the SOURCE MENU and select a new playback source

6. /||: Touch to play/pause disc playback

7. : Touch to stop disc playback

8. >>|: Touch to move to next track

9. |<<: Touch to move to previous track

10. >>: Touch to fast forward current track

11. <<: Touch to rewind current track

12. Touch to activate/deactivate Repeat play mode

15

1

7

2

13

16

12

3

5

DISC

CDDA 1/10 00:00:23

01:02

E

Q

Track 1

Track 2

Track 3

Track 4

Track 5

Track 6

14

4

9

11

10

8

6

The VM9313 will play

music or other audio

files from the following

disc media:

CD-DA

CD-R/RW

DVD

DVD+R/RW

DVD-R/RW

CD-R and CD-RW will

not play unless the

recording session is

finalized.

13. Touch to activate/deactivate Random mode

14. Touch to access the direct entry screen

15. : Touch to view the SETUP menu

16. Touch for quick access to Equalizer level settings

NOTE

During disc play, press the INT button on the remote control to play

the first 10 seconds of each track. When a desired track is reached,

press the INT button again to play the selected track.

CD/DVD Video Operation

A

B

A – Displays

playback

information

B – Displays

on-screen

control menu

TOUCH SCREEN CONTROL AREAS

Touch inside the outlined areas (A and B)

for playback information and controls.

DVD T : 5/8 C : 2/16 00:41:28 2/6 Eng

VCD 2.0 T : 6/18 00:41:28

DVD Display Info "

VCD Display Info "

T : 5/8 – “5/8" indicates the fifth of 8 titles on the DVD is currently playing.

C : 2/16 – “2/16" indicates that the second of 16 chapters/tracks on the disc is

currently playing.

00:41:28 – “00:41:28” indicates the playback time of the current title/track.

 2/6 Eng – The language display information indicates the second language

out of 6 (English) is currently being used.

VCD 2.0 – Format of current disc.

To access the on-screen controls, touch the bottom 1/3 of the screen (section B).

Touch the 1/2 button to view a second page of controls.

1/2

BACK

MENU

2/2

BACK

DISP

EQ

AUDIO

A-B

TITLE

SUBTITLE

Access the direct entry screen

Access the SETUP menu

Exit on-screen control menu

Rewind/Fast Forward

Previous/Next track or title

Play/Pause

Stop playback

View second page of on-screen controls

Access DVD Main Menu

Adjust Equalizer settings

Change audio language for disc playback

Repeat play current track/chapter

Press to select beginning repeat point. Press again

to select end repeat point. Press again to stop.

Select language for subtitles

Select different title for playback

View first page of on-screen controls

Display playback information

1. Current file and total number of files on your media device

2. Elapsed playing time

3. Current time

4. Track titles

5. ID3 information

6. /||: Touch to play/pause disc playback

7. : Touch to stop disc playback

8. >>|: Touch to move to next track

9. |<<: Touch to move to previous track

10. : Touch to view the next page of songs

11. : Touch to view the previous page of songs

12. DIR -: Touch to view the previous folder

MP3/WMA Operation

15

1

7

2

13

5

16

12

3

17

DISC

MP3 4/84 00:00:23

01:02 AM

E

Q

1 Cherry Poppin Dad

2 Chris Isaak - Baby

3 Crazy Town - Butt

4 Phish - Birds Of A

5 Phish - Bouncin' R

6 Phish - Freebird (L

14

4

9

11

10

8

6

DIR - DIR +

(Root)

18

13. DIR +: Touch to view the next folder

14. Touch to access the direct entry screen

15. : Touch to view the SETUP menu

16. Touch for quick access to Equalizer level settings

17. Touch to view the SOURCE MENU and select a new playback source

18. Folder name

Using a USB Device or SD Card

The USB port, located on the front of the radio, will recognize most USB flash

memory devices.

Lift the protective cover and then insert the USB device into the USB connector.

The unit will read the audio/video files on the USB device automatically.

To remove the USB device, press the SRC button to switch to another mode and

then remove the USB device from the USB connector.

This radio is packaged with an SD to USB adaptor, which allows the playback of

SD cards through the USB Connector on the front of the radio.

A / V

INPUT

SD to USB Adaptor

Type A USB

Connector

Bluetooth Operation

The line-of-sight distance between this unit and your cellular phone

must be 8 meters or less, depending on the environment.

Bluetooth is a short-range wireless radio connectivity technology that is developed as

a cable replacement for mobile phones, handheld PCs and other devices. Bluetooth

operates in 2.4 GHz frequency range and transmits voice and data at speeds up to 1

megabit per second.

The BTM10 (purchased separately) is required for Bluetooth operation.

Pairing your Phone

1. Press the button to initiate the pairing process. Keep the mobile phone within 2

meters of the head unit when pairing.

2. Select the Bluetooth setup option on the mobile phone to be paired (please refer

to the phone’s instruction manual).

3. If prompted, enter the “pass key” or pairing code. The dafault code for many

phones is “0000”. The default code for the VM9313 is “1234”.

4. Select “VM9313” from the pairing list on the mobile phone.

Hands Free Profile (HFP)

To use a phone wirelessly with this unit, it is necessary to first establish a connection

using Bluetooth wireless technology. Connection is normally established using HFP

(Hands Free Profile), which gives you full control of functions available on the

telephone source. However, depending on your phone, the connection may be made

using HSP (Head Set Profile), making some functions unavailable. This is a limitation

of your phone, not the VM9313.

Menu List

The menu list appears on the left side of the screen and can be accessed from other

modes by touching the MENU button on the right side of the screen.

To make a call from a list, touch the number and then touch the button.

Missed Calls: The Missed Calls list retrieves the list of Missed numbers from your

phone. The last missed number is the first number on the list. Touch the Missed

Calls menu option to view the list.

Dialed Calls: The Dialed Calls list retrieves the list of dialed numbers from your

phone. The last dialed number is the first number on the list. Touch the Dialed

Calls menu option to view the list.

Received Calls: Use the Received Calls list to view the last 10 received numbers

stored on your phone. To access the Received list, touch the Received Calls menu

option. The last received number is the first number on the list.

Phone Book: Touch the Phone Book menu option to display the phone book

stored on your mobile phone, if compatible. The screen will display “Ready...”

while the phone book is downloading. Once the download is completed, you can

use the arrow buttons and scroll bar on the right side of the window to navigate the

list. Since the unit downloads one page of entries at a time, there may be a slight

delay while the next page of numbers is downloaded.

Not all phones allow access to missed, received or dialed calls and

some will not allow uploading of your phone’s address book.

1

4

14

2

15

BT

Disconnected

01:02 AM

1 Missed Calls

2 Received Calls

3 Dialed Calls

4 Phone Book

3

16

MENU

Menu List

E

Q

19

Bluetooth Operation (continued)

1. Current connection status/device connected

2. Current time

3. Bluetooth menu

4. Current operation status

5. Toggle Music/Phone menu

6. Transfer active call back to handset

7. Pair your Bluetooth phone (first time use)

8. Exit call listing display

9. Connect/disconnect Bluetooth device (phone, PDA, personal music player, etc.)

with hands-free function

La page est en cours de chargement...

Jensen Car Video System VM9313 Manuel utilisateur

Jensen Car Video System VM9313 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents