LG WM1377HW Le manuel du propriétaire

Life's Good

WASING Act!INE

USER'SGUIDE&

INSTAllATIONINSTRUCTIONS

Before beginning installation, read these

instructions carefully. Thiswll simplify installation andensure that the

washer is installed correctly and safely.Leavethese instructions near

the washer after installation for future reference.

[AVADOA

GUIADE[ USUARIOE

INSTRUcclONESDEINSTAIAclON

Antes de comenzar la instalaci6n, lea atentamente estas instruccio-

nes. Estosimplificara la instalacion Yasegurara que la lavadoraesta

instalada enforma correcta y segura.Conserve estas instrucciones

cerca de la lavadora luego de lainstalacion para futuras consultas.

in[ ALave

GUIDEDEL'UTILISATEUBET

DIBEcTIvESD'INSTALLATION

Avant de commencer a installer votre machine alaver,lisezat-

tentivement cesinstructions. Celasimplifiera votre installation

et assurera que la machine alaver est installee correctement et

en route securite. Conservez ces instructions aproximite de la

machine alaver apres son installation, pour reference future.

Model/Modelo/Modele

WM1377HW*

Designed specially to use only

HE (High-Efficiency) detergent

Dise_ada especificamente para usar con

el detergente tipo HE(Alta eficiencia)

Specialement conqu pour

utilisation avec un detergent haute ef-

ficacit¢ uniquement

IIIII IIIII

P/No. MFL63288670

To contact LG Electronics, 24 hours a day,

7 days a week:

1-800-243-0000

Or visit us on the Web at: www.lg.com

NL_mero telef6nico de LG Electronics, las 24 horas

del dia, 7 dias a la semana:

1-800-243-0000

O visitenos en la Web en: www.Lg.com

To contact LG Electronics, 24 hours a day,

7 days a week:

1=888=542=2623

Or visit us on the Web at: ca.lge.com

Pour contacter LG Electronics, 24 heures par jour,

7 jours par semaine :

1-888=542=2623

Ou visitez notre site Web a.I'adresse : ca.lge.com

INT ODUCTION

iMPORTANT SAFETY iNSTRUCTiONS

Basic Safety Precautions ....................................... 3

Grounding Instructions ........................................... 4

Safety Instruction for Installation ............................ 5

Safety Instructions for Use, Care and Cleaning,

and Disposal ........................................................... 6

PARTS AND FEATURES

Special Features ..................................................... 7

iNSTALLATiON iNSTRUCTiONS

Choose the Proper Location .................................. 8

Clearances ............................................................. 8

Flooring .................................................................. 9

Stacking Kit ............................................................ 9

Unpacking ............................................................ 10

Connecting the Water Lines ................................. 11

Connecting the Drain Line .................................... 12

Leveling the Washer ............................................. 13

Installation of non-skid pads (optional) ................ 13

HOW TO USE

Sorting Wash Loads ............................................. 14

Selecting Detergent .............................................. 15

About the Dispenser ............................................. 15

Loading the Dispenser ......................................... 16

Control Panel Features ......................................... 17

Cycle Guide .......................................................... 18

The LED Display ................................................... 19

Operating the Washer .......................................... 20

Cycle Modifier Buttons ......................................... 21

Cycle Option Buttons .......................................... 22

Special Functions ................................................. 23

CARE AND CLEANING

Regular Cleaning ............................................ 24-25

Cleaning the Washer ............................................ 25

Maintenance ................................................... 26-27

TROUBLESHOOTING

Normal Sounds You May Hear ............................. 28

Before Calling for Service ............................... 28-30

Using Smart Diagnosis TM ..................................... 31

SPECiFiCATiONS

Key Dimensions and Specifications ..................... 32

WARRANTY ..............................................33-34

2

THANKYOU{

Congratulations on your purchase

and welcome to the LG family.

Your new LG washing machine

combines the most advanced

washing technology with simple

operation and high efficiency.

Follow the operating and care in-

structions in this manual and your

washer will provide many years of

reliable service.

Product Registration Information

Model:

Serial Number:

Date of Purchase:

The model and serial number can be located on

the rating plate on the front of the washer.

Staple your receipt here.

I 0 TANTSAFETYINST UcTIONS

RSAD ALL iNSTRUCTiONS BEFORS USE

WARNING Foryo.rsafety,theinformationinthisman.alre.stbe

followed to minimize the risk of fire, e×plosion, or electric shock, or to prevent

property damage, personal injury, or loss of life.

Your safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read

and obey all safety messages.

This isthe safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word DANGER or WARNING.

These words mean:

_DANGER: You can be killed or seriously injured if you don't follow instructions immediately.

_WARN|NG .=You can be killed or seriously injured ifyou don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of

injury, and tell you what can happen if the instructions are not followed.

BASIC SAFETY PRECAUTIONS

_I_WARNI|_!t|G= • To reduce the risk of fire, electric shock, or personal injury when using this

appliance, follow basic precautions, including the following.

• Usethis appliance only for its intended purpose as

described in this owner's manual.

Before use, the washer must be properly installed as

described in this manual.

Do not wash articles that have been previously

cleaned in, washed in, soaked in, or spotted with

gasoline, dry cleaning solvents, or other flammable

or explosive substances, as they give off vapors that

could ignite or explode.

Do not add gasoline, dry cleaning solvents, or other

flammable or explosive substances to the wash

water. These substances give off vapors that could

ignite or explode.

Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been

used for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been

used for such a period, before using the washer,

turn on all hot water faucets and let the water flow

from each for several minutes. This will release any

accumulated hydrogen gas. As the gas is flammable,

do not smoke or use an open flame during this time.

Do not allow children to play on or in the washer.

Close supervision of children is necessary when the

washer is used near children.

Before the washer is removed from service or

discarded, remove the door to prevent children from

climbing inside.

Do not install or store the washer where it will be

exposed to the weather or freezing temperatures.

Do not tamper with controls.

Keep the area underneath and around your

appliances free of combustible materials (lint, paper,

rags, etc.), gasoline, chemicals and other flammable

vapors and liquids.

Do not repair or replace any part of the washer or

attempt any servicing other than as described in this

manual. We strongly recommend that any service be

performed by a qualified technician.

See Installation Instructions for grounding

requirements.

ALWAYS follow the fabric care instructions

supplied by the garment manufacturer.

Do not place items exposed to cooking oil in your

washer. Items contaminated with cooking oils may

contribute to a chemical reaction that could cause a

load to catch fire.

Use fabric softeners or products to eliminate static

only as recommended by the manufacturer.

This washer is not designed for maritime use or for

mobile installations such as in RVs, aircraft, etc.

Turn off the water faucets and unplug the washer if

the machine is to be left for an extended period of

time, such as during vacations.

5

IMPORTANTSAFETYINSTRUCTIONS

RSAD ALL iNSTRUCTiONS BEFORS USS

_WARNING Foryoursafe_,theinformationinthismanualmustbe

followed to minimize the risk of fire, explosion, or electric shock, or to prevent

property damage, personal injury, or loss of life.

• Packaging material can be dangerous for children.

There is a risk of suffocation! Keep all packaging

from children.

• Always check the insideof the washer for foreign

objects before loading laundry. Keep the door closed

when not in use.

• Do not reach into the appliance if the tub or agitator is

moving.

WARNING: This product contains chemicals known

to the State of California to cause cancer and birth

defects or other reproductive harm.

Wash hands after handling.

GROUNDING iNSTRUCTiONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce

the risk of electric shock by providing a path of least resistance for electric current. This appliance is

equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must

be plugged into an appropriate outlet that is properly installed and grounded in accordance with all

local codes and ordinances.

&WARNING: Improper connection of the equipment-grounding conductor can result in risk

of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the

appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the

outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause

serious injury, fire, electrical shock, or death.

4

I 0 TANTSAFETYINST UcTIONS

RSAD ALL iNSTRUCTiONS BEFORS USE

WARNING For yo.r safety,the information in this manual must be

followed to minimize the risk of fire, explosion, or electric shock, or to prevent

property damage, personal injury, or loss of life.

SAFETY iNSTRUCTiONS FOR iNSTALLATiON

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using this

appliance, follow basic precautions, including the following.

• Refer to INSTALLATION INSTRUCTIONS for

detailed grounding procedures. Installation

instructions are packed in the washer for installer's

reference. Ifthe washer is moved to a new location,

have it checked and reinstalled by aqualified service

person. Failure to follow this warning can cause

serious injury, fire, electrical shock, or death.

• Do not, under any circumstances cut or remove

the third (ground} prong from the power cord.

Failure to follow this warning can cause serious

injury, fire, electrical shock, or death.

• For personal safety, this appliance must be

properly grounded. Failure to follow this warning

can cause serious injury, fire, electrical shock,

or death.

• The power cord of this appliance is equipped

with a 3-prong (grounding} plug which mates

with a standard 3-prong (grounding} wall outlet to

minimize the possibility of electric shock hazard from

this appliance.

• This washer must be plugged into a 120 VAC,

60 Hz grounded outlet. Failure to follow this warning

can cause serious injury, fire, electrical shock, or

death.

• Have the wall outlet and circuit checked by a

qualified electrician to make sure the outlet is

properly grounded. Failure to follow this warning

can cause serious injury, fire, electrical shock,

or death.

• Where a standard 2=prong wall outlet is

encountered, it is your personal responsibility

and obligation to have it replaced with a properly

grounded 3-prong wall outlet. Failure to follow

this warning can cause serious injury, fire, electrical

shock, or death.

• Do not install on carpet. Install washer on a solid

floor. Failure to follow this warning can cause serious

leak damage.

• Do not remove ground prong. Do not use an

adapter or extension cord. Plug into a grounded

3=prong outlet. Failure to follow these warnings can

cause serious injury, fire, electrical shock, or death.

• The washer should always be plugged into its

own individual electrical outlet which has a

voltage rating that matches the rating plate. This

provides the best performance and also prevents

overloading house wiring circuits which could cause

a fire hazard from overheated wires.

• Never unplug your washer by pulling on the

power cord. Always grip plug firmly and pull straight

out from the outlet. Failure to follow this warning can

cause serious injury, fire, electrical shock, or death.

• Repair or replace immediately all power cords

that have become frayed or otherwise damaged.

Do not use a cord that shows cracks or abrasion

damage along its length or at either end. Failure

to follow this warning can cause serious injury, fire,

electrical shock, or death.

• When installing or moving the washer, be careful

not to pinch, crush, or damage the power cord.

Failure to follow this warning can cause serious

injury, fire, electrical shock, or death.

The washer must be installed and electrically

grounded by a qualified service person in

accordance with local codes to prevent shock

hazard and assure stability during operation.

The Washer is heavy. Two or more people may be

needed to install and move the appliance. Failure

to do so can result in back or other injury.

Store and install the washer where it will not

be exposed to temperatures below freezing or

exposed to outdoor weather conditions. Failure to

follow this warning can cause serious leak damage.

To reduce the risk of electric shock, do not install

the washer in humid spaces. Failure to follow this

warning can cause serious injury, fire, electrical

shock, or death.

To reduce the risk of injury to persons, adhere

to all industry recommended safety procedures

including the use of long sleeved gloves and

safety glasses. Failure to follow all of the safety

warnings in this manual could result in property

damage, injury to persons or death.

5

IMPORTANTSAFETYINSTRUCTIONS

READ ALL iNSTRUCTiONS BEFORE USE

WARNING For your safety,the information in this manual must be

followed to minimize the risk of fire, explosion, or electric shock, or to prevent

property damage, personal injury, or loss of life.

SAFETY iNSTRUCTiONS FOR USE, CAREAND CLEANING,AND DISPOSAL

,WARNING: To reduce the risk of fire, electric shock, or personal injurywhen using this

appliance, follow basic precautions, including the following.

• Unplug the washer before cleaning to avoid the

risk of electric shock.

• Never use harsh chemicals, abrasive cleaners,

or solvents to clean the washer. They will

damage the finish.

• Do not put oily or greasy rags or clothing on

top of the washer. These substances give off

vapors that could ignite the materials.

• Do not wash items that are soiled with

vegetable or cooking oil. These items may

contain some oil after laundering. Due to the

remaining oil, the fabric may smoke or catch

fire by itself.

• Disconnect this appliance from the

power supply before attempting any user

maintenance. Turning the controls to the OFF

position does not disconnect this appliance

from the power supply. Failure to follow this

warning can cause serious injury,fire, electrical

shock, or death.

• Do not combine laundry products for use in

one load unless specified on the label.

• Do not mix chlorine bleach with ammonia

or acids such as vinegar. Follow package

directions when using laundry products.

incorrect usage can produce poisonous gas,

resulting in serious injuryor death.

• Do not reach into the washer while parts are

moving. Before loading, unloading or adding

items, push in the cycle selector knob and

allow the drum to coast to a complete stop

before reaching inside. Failure to follow this

warning can cause serious injury,fire, electrical

shock, or death.

• Do not allow children to play on or in the

washer. Close supervision of children is

necessary when the washer is used near

children. As children grow, teach them the

proper, safe use of all appliances. Failure to

comply with these warnings could result in serious

personal injuries.

• Destroy the carton, plastic bag and other

packing materials after the washer is

unpacked. Children might use them for play.

Cartons covered with rugs, bedspreads, or

plastic sheets can become airtight chambers.

Failure to comply with these warnings could result

in serious personal injuriesor death.

• Keep laundry products out of children's reach.

To prevent personal injury, observe all warnings

on product labels. Failure to comply with these

warnings could result in serious personal injuries.

• Remove the door to the washing compartment

to avoid the danger of children or small animals

getting trapped inside before your washer is

removed from service or discarded. Failure

to do so can result in serious personal injury

or death.

• Make sure the dispenser drawer is closed at

all times when not being filled with laundry

products. Failure to keep the drawer closed can

result in personal injuryor flooding.

6

PA TS AND FEATU ES

0

O

0

O

0

SPEciAL FEATURES

DETERGENT DISPENSER DRAWER

This three-compartment drawer provides separate

dispensers for prewash and main wash detergent,

and liquid fabric softener.

CONTROL PANEL WITH LED DISPLAY

Simple electronic controls are user-friendly.

The LED display indicates cycle options and

cycle time during operation.

LARGE-CAPACITY STAINLESS STEEL DRUM

The large capacity stainless steel drum offers

extreme durability and is tilted to improve

efficiency and allow easier access for large items.

NOTE: No matter how large the article, there

must still be room for the clothes to tumble.

INVERTER DIRECT-DRIVE MOTOR

The inverter direct drive motor, which is directly

connected to the drum, is capable of producing

multiple distinct motions for optimal washing

performance with very little noise and vibration.

The motor assembly also contains fewer moving

parts, resulting in fewer repairs.

DRAIN ACCESS PANEL

Provides access to the drain line and drain

pump filter.

EASY=ACCESS DOOR

Extra-large door locks during operation and

features a delay to prevent the door from being

opened until the washer interior has cooled and

the water level has lowered.

LEVELING FEET

Four leveling feet (two in the front and two in

the back) adjust to improve washer stability on

uneven floors.

//

¢

Rear of Washer

Included Accessories

Hot and Cold

Water Hoses

Non-skid pads

Wrench

(for removing shipping Tie Strap

bolts and adjusting (for securing

leveling feet) drain hose)

Elbow Bracket

(for securing drain

hose)

\'4 ,J'

7

INSTALLATIONINST UcTIONS

CHOOSETHE PROPER LOCATION

WARN|HG

• The Washer is heavy! Two or more people

are required when moving and unpacking

the washer. Failure to do so can result in back

or other injury.

• Store and install the washer where it will not

be exposed to temperatures below freezing

or exposed to outdoor weather conditions.

Failure to follow this warning can cause serious

injury, fire, electrical shock, or death.

• Properly ground the washer to conform with

all governing codes and ordinances. Failure to

follow this warning can cause serious injury, fire,

electrical shock, or death.

• To reduce the risk of electric shock, do not

install the washer in humid spaces. Failure to

follow this warning can cause serious injury, fire,

electrical shock, or death.

• Do not remove the ground prong. Do not use

an adapter or extension cord. Plug into a

grounded 3=prong outlet. Failure to follow this

warning can cause serious injury, fire, electrical

shock, or death.

Power Outlet

• The power outlet must be within 60 in. (1.5 m) of

either side of the washer.

• The appliance and outlet must be positioned so

that the plug is easily accessible.

• Do not overload the outlet with more than one

appliance.

• The outlet must be grounded in accordance with

current wiring codes and regulations.

• Time-delay fuse or circuit breaker is

recommended.

NOTE: It is the personal responsibility and

obligation of the product owner to have a

proper outlet installed by a qualified electrician.

CLEARANCES

45" (114.3 cm)

25.2" (64 cm)

1" (2.5 cm) 24" (60.96 cm) 1" (2.5 cm)

To ensure sufficient clearance for water lines and

airflow, allow minimum clearances of at least

1 in. (2.5 cm) at the sides and 4 in. (10 cm)

behind the unit. Be sure to allow for wall, door,

or floor moldings that may increase the required

clearances.

Allow at least 19.8 in. (50.3 cm) in front of the

washer to open the door.

8

INSTA[/MION INST UcTIONS

FLOORING

• To minimize noise and vibration, the washer

MUST be installed on a solidly constructed floor.

See the NOTE below.

Allowable slope under the entire washer is

1° maximum.

Carpeting and soft tile surfaces are not

recommended.

Never install the washer on a platform or weakly

supported structure. Use only an approved

accessory pedestal.

NOTE: If a drip pan must be used, take extra

care to follow the instructions provided with the

drip pan and make sure the leveling feet are

adjusted for firm and even contact with the pan.

Use of drip pans and failure to properly level the

machine may result in increased vibration and

noise during operation.

STACKING KIT

To stack the LG dryer on this washer, the stacking kit included with the dryer must be used.

For kit instructions, refer to the dryer owner's manual or the instructions included with the stacking kit.

Dryer

Washer

9

INSTALLATIONINST UcTIONS

UNPACKING

When removing the washer from the carton base,

be sure to remove the foam drum support in the

middle of the carton base. If you must lay the

washer down to remove the base packaging

materials, always lay it carefully on its side. Do

NOT lay the washer on its front or back.

IMPORTANT: To prevent internal damage

during transport, the washer isequipped with

4 shipping bolts and plastic retainers. These

bolts and retainers MUST be removed before

operating the washer.

• Failure to remove shipping bolts and retainers

may cause severe vibration and noise, which can

lead to permanent damage to the washer. The

cord is secured to the back of the washer with

a shipping bolt to help prevent operation with

shipping bolts in place.

Carton Base

Starting with the bottom 2 shipping bolts,

use the included wrench to remove the

4 shipping bolts by turning them

counterclockwise.

Cap J

Remove the retainers by turning them slightly

while pulling. Rotate and press the hole caps

into the shipping bolt holes.

NOTE: Save the bolts and retainers for

future use. To prevent damage to internal

components, the shipping bolts and

retainers must be installed when

transporting the washer.

10

INSTA[/MION INST UcTIONS

CONNEcTiNG THE WATER LINES

NOTE:

• For your safety, and for extended product

life, use only authorized components. The

manufacturer is not responsible for product

malfunction or accidents caused by the use of

separately purchased, unauthorized parts.

Use new hoses when you install the washing

machine. Do not reuse old hoses. Use only the

inlet hoses provided with the washer. LG does

not recommend the use of aftermarket hoses.

Periodically check the hoses for cracks, leaks

and wear, and replace the hoses every 5 years.

Do not stretch the water hoses intentionally, and

make sure that they are not crushed by other

objects.

Water supply pressure must be between 14.5

psi and 116 psi (100-800 kPa). If the water

supply pressure is more than 116 psi, a pressure

reducing valve must be installed.

To provide optimum washing performance the

hot water temperature should be set at 120-

135°F (48-57°C) and the cold at 60°F (15°C).

Water

Inlets

NOTE: Do not cross-thread the hose fittings.

Attach the hot water line to the red hot water

inlet on the back of the washer. Attach the

cold water line to the blue cold water inlet on

the back of the washer. Tighten the fittings

securely.

Water Hose

(to water inlet

on washer)

?

Rubber Seal

OF

Rubber Seal

Water Hose

(to water inlet

on washer)

Rubber Seal

Water Hose

(to tap)

J

Insert a rubber seal into the threaded

fittings on each hose.

Water Tap

Attach the hot water line to the hot water

faucet. Attach the cold water line to the cold

water faucet.

Tighten the fittings securely. Open the water

faucets fully to check for leaks.

11

INSTAllATION INST UcTIONS

CONNECTING THE DRAIN LiNE

• The drain hose should always be properly

secured. Failure to properly secure the drain

hose can result in flooding and property

damage.

• Do not install the end of the drain hose higher

than 96 in. (244.8 cm) above the bottom of the

washer.

• The drain must be installed in accordance with

any applicable local codes and regulations.

• Make sure that the water lines are not stretched,

pinched, crushed, or kinked.

NOTE: If the drain hose is extended more than 4

inches beyond the end of the end of the elbow

bracket, mold, or microorganisms could spread to

the inside of the washer.

No more than _ I L'*:l

4 inches

Elbow

Option 1: Standpipe

..IEIbow

Bracket

_" Drain

Hose

Clip the end of the hose into the elbow bracket.

Insert the end of the drain hose into a standpipe.

Use tie strap to secure the drain hose in place.

NOTE: Total height of the hose end should not

exceed 96 in. (244.8 cm) from the bottom of the

washer.

Option 2: Laundry Tub

,,_

Elbow

Bracket Laundry

Tie RL.J

In Strap

Hose

Clip the end of the hose into the elbow bracket.

Hang the end of the drain hose over the side of

the laundry tub. Use tie strap to secure the drain

hose in place.

NOTE: Total height of the hose end should not

exceed 96 in. (244.8 cm) from the bottom of the

washer.

12

INSTAI_I_MIONINST UcTIONS

LEVELING THE WASHER

The drum of your new washer spins at very high

speeds, up to 1,400 RPM. To minimize vibration,

noise, and unwanted movement, the floor must be

a perfectly level, solid surface.

NOTE: Adjust the leveling feet only as far as

necessary to level the washer. Extending the

leveling feet more than necessary can cause

the washer to vibrate.

Leveling

Feet

Leveling Feet

Position the washer in the final location, taking

special care to not pinch, strain, or crush the

water and drain lines. Place a level across the

top of the washer.

Raise

Loosen the Iocknuts on all 4 leveling feet

until you can turn the feet with the included

wrench. Turn clockwise to raise the washer

or counterclockwise to lower it.

• All four leveling feet must rest solidly on the

floor. Rock the washer gently from corner to

corner to make sure that the washer does

not rock.

Tighten all 4

Iocknuts securely

Once the washer is level from side to side and

front to back, tighten all Iocknuts securely.

Make sure that all 4 leveling feet are in firm

contact with the floor.

NOTE: To make sure that the washer is

properly level, run the washer with a test load:

place approximately 6 pounds of laundry

in the machine. Then, press POWER, press

RINSE+SPIN, and then press the START/

PAUSE button. (See the following sections for

additional information on cycle selection and

operation.)

Verify that the washer does not rock or vibrate

excessively during the spin cycle.

If the washer vibrates or shakes, adjust

the leveling feet until the washer is stable and

retest.

INSTALLATION OF NON-SKID PADS (OPTIONAL)

Some floor surfaces are too slippery to prevent

the washer from moving on the floor during

heavily unbalanced loads. While it is normal for

an occasional load to be out of balance, excess

noise and vibration can result from the washer

moving out of position. If these conditions are

encountered, follow the instructions below for

installation of the non-skid pads. These pads

will help prevent the washer from moving during

heavy out of balance conditions thereby reducing

noise and vibration.

• Non=skid pads This side up

Stick adhesive side to floor

move backing

:_:Place the pads Under both front feet.

15

OWTO USE

SORTING WASH LOADS

FaBric Care LaBels

Most articles of clothing feature fabric care labels

that include instructions for proper care.

Fabric Care Labels

wash

cycle Normal Permanent_press/ GentlY/

wrinkle resistant delicate

H h Donot wash Donot wring

Water • • • • • Q

temperature Not Warm Cold/cool

(50%/120°F) (40%/105°F) (30°C/85°F)

0,e chA A

symbols Any bleach 0nly non-chl0rine bleach Donot bleach

(when needed) (whenneeded)

J

Grouping Similar Items

For best results, sort clothes into loads that can

be washed with the same wash cycle.

Different fabrics have different care requirements.

Always wash dark colors separately from light

colors and whites to prevent discoloration. If

possible, do not wash heavily soiled items with

lightly soiled ones. The chart below shows

recommended groupings.

Sort Laundry..

rs

IWhites I Heavy

ILights I Normal

Darks _Light

Loading the was#er

• Check all pockets to make sure that they

are empty. Items such as dips, matches,

pens, coins, and keys can damage both your

washer and your clothes.

• Close zippers, hooks, and drawstrings to

prevent these items from snagging or tangling

on other clothes.

• Pretreat heavily stained areas for best results.

• Combine large and small items in a load. Load

large items first.

• Large items should not be more than half of the

total washload.

• The washer can be fully loaded, but the drum

should not be tightly packed with items. The

door of the washer should close easily.

• To prevent an out-of-balance load, do not wash

single items. Add one or two similar items to

the load. Large, bulky items, such as a blanket,

comforter, or bedspread should be washed

individually.

• Do not wash or spin waterproof clothes.

• When unloading the washer, check under the

door seal for small items.

NOTE: The front loading washer rotates the

wet laundry to wash itwith less water. If you

do not see the water during washing, it is not

a problem because the laundry is sufficiently

wet.

REMINDER: The load must have room to

tumble to wash effectively. Just because an

item can be forced into the drum does not

mean it should be washed in the machine. It

must be able to tumble.

14

0 TO USE

SELECTING DETERGENT

IMPORTANT: Your washing machine is

designed for use with only High-Efficiency

(HE) detergents. HE detergents are formulated

specifically for front-load washers and contain

suds-reducing agents. Always look for the HE

symbol when purchasing detergent.

HE detergents produce fewer suds, dissolve

more efficiently to improve washing and rinsing

performance, and help to keep the interior of your

washer clean.

Using a regular detergent may cause oversudsing

and unsatisfactory performance.

IMPORTANT: Do not place or store laundry

products, such as detergent, bleach, or liquid

fabric softener, on top of your washer or dryer.

Wipe up any spills immediately. These products

can damage the finish and controls.

Designed specially to use only

HE (High-Efficiency) detergent

ABOUT THE DISPENSER

The automatic dispenser consists of three

compartments which hold:

• Liquid fabric softener.

Liquid or powdered detergent for prewash.

Liquid or powdered detergent and color-safe

bleach for main wash.

All laundry products can be added at once in

their respective dispenser compartments.

They will be dispensed at the appropriate time

for the most effective cleaning.

After adding the laundry products to the

dispenser, close the dispenser drawer.

To add detergent and fabric softener to the

automatic dispenser:

O Open the dispenser

drawer.

_! Load the into the

laundry products

appropriate compartments.

_! Slowly close the dispenser drawer to

avoid early dispensing of the laundry

products.

NOTE: It is normal for a small amount of water to

remain in the dispenser compartments at the end

of the cycle.

. Liquid Fabric softener

,mpartment

Compartment

15

OWTO USE

LOADING THE DISPENSER

Prewash Detergent Compartment

Add liquid or powdered detergent to this

compartment when using the Prewash option.

Always use HE (High-Efficiency) detergent with

your washing machine.

• The amount of detergent added for the Prewash

option is 1/2 the amount recommended for the

main wash cycle. For example, if the main wash

cycle requires TWO tablespoons (1 oz. or 30

m0 of detergent, add ONE tablespoon for the

Prewash option.

NOTE: If you are using the Prewash option,

powdered detergent must be used in the main

wash compartment. Liquid detergent will drain

into the washer drum as it is added.

Fabric Softener Compartment

This compartment holds liquid fabric softener,

which will be automatically dispensed during the

final rinse cycle.

• Always follow the manufacturer's

recommendations when adding fabric softener.

Do not exceed the maximum fill line. Using

too much fabric softener may result in stained

clothes.

• Dilute concentrated fabric softeners with warm

water. Do not exceed the maximum fill line.

• Never pour fabric softener directly onto the load

or into the drum.

Main was# Detergent Compartment

This compartment holds laundry detergent

for the main wash cycle, which is added to

the load at the beginning of the cycle. Always

use HE (High-Efficiency) detergent with your

washing machine.

Never exceed the manufacturer's

recommendations when adding detergent.

Using too much detergent can result in

detergent buildup in clothing and the washer.

Either powdered or liquid detergent may be used.

NOTE: Liquid detergent will drain into the washer

drum as it is added.

NOTE: Liquid or powdered color-safe bleach

may be added to the main wash compartment

with detergent of the same type.

Designed specially to use only

HE (High-Efficiency) detergent

16

0 TO USE

CONTROL PANEL FEATURES

Baby Wear

_ . Delicates r - = =_

I ! I

Hand Wash ! |

/Wool _) I !

! |

-- Speed Wash ! !

Drain+Spin 1, 'L

I

2 '

Option

0 POWER ON/OFF BUTTON

Press to turn the washer ON.

Press again to turn the washer OFR

NOTE: Pressing the ON/OFF button during a

cycle will cancel that cycle and any load settings

will be lost.

CYCLE SELECTOR KNOB

Turn this knob to select the desired cycle. Once

the desired cycle has been selected, the standard

presets will be shown in the display. These

settings can be adjusted using the cycle modifier

buttons anytime before starting the cycle.

START/PAUSE BUTTON

Press this button to START the selected cycle.

If the washer is running, use this button to PAUSE

the cycle without losing the current settings.

NOTE: If you do not press the START/PAUSE

button within 4 minutes of selecting a cycle, the

washer automatically turns off.

O

CYCLE MODiFiER BUTTONS

Use these buttons to select the desired cycle

options for the selected cycle. Press the button

for that setting until the indicator light for the

desired value is lit.

OPTION BUTTONS

The option buttons allow you to select

additional cycle options and will light when

selected. Certain buttons also allow you to

activate special functions by pressing and

holding the button for 3 seconds.

For detailed information about the individual

options, please see the following pages.

LED DISPLAY

The display shows the settings, estimated

time remaining, options, and status messages

for your washer. The display will remain on

through the cycle.

17

OWTO USE

CYCLEGUIDE

The cycle guide below shows the options and recommended fabric types for each cycle.

= Available option = Cycle default settings

Sanitary

Bulky/Large

Cotton/

Normal

Perm.Press

Baby Wear

Delicates

Hand Wash

/Wool

Speed

Wash

Drain+Spin

Very High

Heavily soiled Extra High

underwear, work No Spin

clothes, diapers, etc Very Low

Low

Medium

Heavy

Light

Large items such as Hot No Spin Heavy

blankets and comforters Tap Cold Very Low Light

Cold Low

Hot Very High Heavy

Cotton, linen, towels, Tap Cold Extra High Light

shirts, sheets, jeans, Cold No Spin

mixed loads Very Low

Low

Medium

Dress shirts/pants, Hot High Heavy

wrinkle free clothing,

Tap Cold No Spin Light

poly/cotten blend

Cold Very Low

clothing, table cloths Low

Hot No Spin

Lightly soiled baby wear Tap Cold Very Low Light

Cold Low

Medium

Dress shirts/blouses Warm No Spin Heavy

nylons, sheer or lacy Tap Cold Very Low Light

garments Low

Items labeled

Tap Cold Very Low Light

"hand washable"

Cold No Spin

Lightly soiled clothing

and small loads

Drain, Spin Only

Tap Cold No Spin Heavy

Cold Very Low Light

Warm Low

Medium

High

Very High

No Spin

Very Low

Low

Medium

High

Very High

NOTE: Toprotect your garments, not every'wash temperature, spin speed, soil level, or option is available with every

cycle.

.J

18

OWTO USE

THE LED DISPLAY

The LED display shows the settings, estimated time remaining, options, and status messages

for your washer. When the washer is turned on, the display will illuminate.

CYCLE COMPLETION iNDiCATOR

This portion of the display shows which stage

of the wash cycle is currently underway

(Load Sensing, Wash, Rinse, Spin).

O

ESTIMATED TIME REMAiNiNG

When the START/PAUSE button is pressed, the

washer automatically detects the wash load

(weight) and optimizes the washing time, based

on the selected cycle and options. The display

will then indicate the estimated time remaining

for the selected wash cycle.

NOTE: The cycle time displayed may appear

much longer than that of a top-loading washer.

The displayed time is for the complete cycle,

rather than just the agitation portion of the

cycle, as is typically shown on a top-loading

washer.

O

DOOR LOCK iNDiCATOR

Indicates that the door is locked. The washer

door will lock while the washer is operating. The

door can be unlocked by pressing the START/

PAUSE button to stop the washer.

NOTE: If the temperature in the washer is too

high, the door cannot be unlocked until the

washer has cooled. If the water level is too

high, select the Drain & Spin cycle to drain

excess water. Do not try to force open the door.

O

CHILD LOCK INDICATOR

This indicator shows that the washer has

been set for Child Lock. Select this function to

lock the buttons on the control panel and to

prevent tampering.

19

OWTO USE

OPERATING THE WASHER

once you have loaded the washer and added

laundry products (detergent, bleach, and/or

fabric softener):

O Press the ON/OFF button to turn on the

washer. The lights around the

cycle selector knob will illuminate.

O Turn the cycle selector knob to the desired

cycle. The display will show the

preset Rinse/Wash Temperature,

Spin Speed, Soil Level, and

Option settings for that cycle.

t_lf you would like to change the settings for

that cycle, press the appropriate cycle

modifier button(s) until the indicator light for

the desired setting is lit.

NOTE: To protect your garments, not every

wash temperature, spin speed, soil level, or

option is available with every cycle.

O

Press the START/PAUSE button

to begin the cycle. The door will

latch, the display will change,

and the washer will calculate the

estimated time remaining. Once the washer

has calculated the estimated total cycle time,

the washer will start. To pause the cycle at

any time, press PAUSE.

NOTE: The cycle time displayed may

appear much longer than that of a top-

loading washer. The displayed time is for the

complete cycle, rather than just the agitation

portion of the cycle, as is typically shown on

a top-loading washer.

NOTE: If the temperature in the washer is

too high, the door cannot be unlocked until

the washer has cooled. If the water level is

too high, select the Drain & Spin cycle to

drain excess water. Do not try to force the

door open.

Washing time can be reduced significantly

for small or lightly soiled loads by selecting

the Speed Wash cycle and setting the Soil

Level button to Light.

When the load is finished, the beeper (if set)

will sound and the door will unlock.

Remove damp clothes from the washer

immediately. Check under the door seal

for small items.

2O

La page est en cours de chargement...

LG WM1377HW Le manuel du propriétaire

LG WM1377HW Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents