Shaper Origin SO1-SN Manuel utilisateur

Marque: Shaper

Modèle: Origin SO1-SN

Catégorie: Outils électroportatifs

Taper: Manuel utilisateur

Ce manuel convient également à

shapertools.com

Product Manual

Guide d’utilisation

Bedienungsanleitung

S01-EN | SO1-SN | SO1-UN | SO1-ON

shapertools.com iii

Congratulations on your Shaper Origin™

purchase! We know you’re excited to start cutting

and carving, but please make sure to read all of

the operating instructions, warnings, and safety

notes in this booklet before operating Origin.

Welcome

Patent Infomation

Information relative aux brevets

Patentinformationen

www.shapertools.com/patents

Bienvenue

Willkommen

Nous vous félicitons d’avoir acheté un Shaper

Origin™! Nous savons que vous êtes impatient

de commencer à découper et à sculpter, mais

veuillez vous assurer de bien lire toutes les

directives d’utilisation, les avertissements et les

notes de sécurité de ce manuel avant d’utiliser

Origin.

Herzlichen Glückwunsch zum Kauf Ihres

Shaper Origin™! Wir wissen, dass Sie sich

schnellstmöglich dem Fräsen und Gravieren

widmen möchten, jedoch bitten wir Sie darum,

zuerst sämtliche Bedienungsanweisungen,

Warnungen und Sicherheitshinweise in dieser

Betriebs anleitung durchzulesen, bevor Sie Origin

nutzen.

support.shapertools.com

Our support page has answers to frequently

asked questions about using Origin: choosing

router bits, working with different materials,

effectively clamping and securing your workpiece,

maintaining Origin, and more. We highly

recommend you read these tips before getting

started. You’ll also ﬁnd contact info for Shaper

customer support.

tutorials.shapertools.com

Visit our tutorials page for written and video

instructions about Origin’s many features and

capabilities. The tutorial videos will also walk you

through the creation of ShaperHub™ projects.

hub.shapertools.com

When you’re ready to make your ﬁrst project,

check out ShaperHub for ready-to-cut projects

with detailed instructions, material lists, and

design ﬁles.

Visit the link below for a complete walk-

through and some demos to get you familiar

with Origin:

shapertools.com/start

Quick Start

English

shapertools.com iviii

interior cut

black stroke and white ﬁll

exterior cut

black stroke and black ﬁll

on-line cut

gray stroke

pocketing cut

gray ﬁll

guide

blue stroke or blue ﬁll

Designing for Origin

support.shapertools.com

Notre page de soutien contient des réponses aux

questions fréquemment posées sur l’utilisation

de l’Origin : le choix de mèches de toupie, le

travail avec divers matériaux, le serrage et la

ﬁxation efﬁcaces de votre pièce, l’entretien

d’Origin etc. Nous vous recommandons fortement

de lire ces conseils avant de vous lancer. Vous

trouverez également les coordonnées de soutien

à la clientèle de Shaper.

tutorials.shapertools.com

Rendez-vous sur notre page de tutoriels pour des

directives écrites et vidéo quant aux nombreuses

fonctionnalités et capacités d’Origin. Les tutoriels

vidéo vous guideront également à travers la

création de projets ShaperHub™.

hub.shapertools.com

Lorsque vous êtes prêt à réaliser votre premier

projet, consultez ShaperHub pour accéder à

des projets prêts à sculpter accompagnés de

directives détaillées, de listes de matériaux et de

ﬁchiers de conception.

Rendez-vous sur le site indiqué ci-dessous

pour bénéﬁcier d’un tour d’horizon complet

et de quelques présentations pour vous

familiariser avec Origin:

shapertools.com/start

Guide de démarrage rapide

Français

shapertools.com viv

coupe intérieure

trait noir et remplissage blanc

coupe extérieure

trait noir and remplissage noir

coupe sur la ligne

trait gris

coupe par évidage

remplissage gris

guider

trait bleu ou remplissage bleu

Concevoir pour Origin

support.shapertools.com

Unsere Support-Seite hat Antworten auf häuﬁg

gestellte Fragen rund um die Nutzung Ihrer

Origin: Die Auswahl des Fräsers, die Bearbeitung

unterschiedlicher Materialien, die effektive

Befestigung und Sicherung Ihres Werkstücks, die

korrekte Instandhaltung des Geräts und vieles

mehr. Wir raten Ihnen dazu, sich diese Tipps

vor Inbetriebnahme Ihrer Origin durchzulesen.

Auf dieser Seite ﬁnden Sie außerdem

Kontaktinformationen zum Shaper Kundenservice.

tutorials.shapertools.com

Unsere Tutorial-Seite beinhaltet Anleitungen und

Videos zu Origins Eigenschaften und Fähigkeiten.

Die Lehrvideos vermitteln Ihnen außerdem, wie

Sie Ihre ersten Projekte auf ShaperHub™ kreieren

können.

hub.shapertools.com

Sobald Sie bereit für Ihr erstes Projekt

sind, ﬁnden Sie auf ShaperHub eine große

Auswahl an vorgefertigten Projekten mit

ausführlichen Anleitungen, Materiallisten und

Konstruktionsdateien.

Um einen ersten Überblick über Ihre Origin

zu erhalten, besuchen Sie bitte den unten

stehenden Link:

shapertools.com/start

Schnellstart

Deutsch

shapertools.com 1vii

Table of Contents

2 What’s Included

4 Overview

6 Basics

10 Using ShaperTape™

13 Safety & Care

23 Compliance

User Guide

(English Version)

Innenschnitt

schwarze Linie und weiße Füllung

Außenschnitt

schwarze Linie und schwarze Füllung

Auf der Kontur

graue Linie

Tasche

graue Füllung

Hilfslinie

blaue Linie oder blaue Füllung

Gestalten für Origin

shapertools.com 32

What's IncludedWhat's Included

Shaper Origin

Dust Collection Hose

ShaperTape™

4mm T Handle

Hex Wrench

3mm Upcut

Router Bit

6mm Upcut

Router Bit

Finger Guard

Engraving

Bit

19mm Wrench

shapertools.com 54

OverviewOverview

Touchscreen: Origin’s 5 inch multi-touch display

controls Origin’s many features.

SM1 Spindle: Origin is equipped with a powerful

720-Watt motor. It features variable speed control

and on-board electronics to deliver soft start,

thermal and overload protection, and constant

speed under load.

Dust Port: Origin is intended to be used with a

dust extraction system. Origin’s dust port accepts

many common vacuum hose sizes, or you may

use the hose that’s included with Origin.

Spindle Switch: You’re in control. For your

safety, Origin’s SM1 Spindle will never turn on

automatically. Use the spindle switch to turn on

the spindle when you’re ready to start cutting.

Spindle Mount: The SM1 Spindle is designed to

be removable for safe and easy router bit

changes. After loosening the spindle mount bolt,

simply remove or insert the SM1 Spindle.

Handles: Always ﬁrmly grasp both handles when

operating Origin. The buttons on each handle

map to the functions shown on the screen.

touchscreen

spindle

dust port

spindle switch

spindle mount

handle

Speed Control: The SM1 Spindle has adjustable

speed from 10 000 to 26 000 RPM, with the lowest

speed mapped to 1 on the dial, and the highest

speed mapped to 6. Use this dial to adjust the

spindle rotation speed. For a list of recommended

cut speeds for various materials and applications,

visit support.shapertools.com.

Z-Axis: Origin’s Z-Axis is responsible for plunging

and retracting the SM1 Spindle.

Collet Lock: Press the collet lock and use the

included 19mm wrench to change router bits in

the SM1 Spindle.

Back Handle: On the go? Carry Origin using the

back handle.

Camera: Origin uses a computer vision system

to track its location on your workpiece. Keep the

camera unobstructed and the lens cover glass

clean to ensure the best cutting experience.

USB Port: No network? No problem. If your Origin

is not in range of a Wi-Fi network, you can also

transfer design ﬁles using a USB ﬂash drive.

speed control

z-axis

collet lock

back handle

camera

usb port

shapertools.com 76

BasicsBasics

2. Gently slide the spindle mount and spindle up.

3. Remove the red spindle lock by tilting it up

and pulling it forward.

Retain the shaft lock and spindle lock for

future use. Reinstall both locks to keep the

spindle stationary during transit or shipping.

1. Remove the red shaft lock by ﬁrmly pulling on

the circular handle.

Removing the Shaft Lock

and the Spindle Lock

IMPORTANT: Always unplug the SM1 Spindle from

Origin before removing the spindle from the

spindle mount.

To enable unobstructed access to change the

router bit, the SM1 Spindle must be removed

from Origin. Use the included 4mm T-handle hex

wrench to loosen the spindle mount bolt. Once

loosened, lift the spindle to remove it.

To reinstall the spindle, slide it into the spindle

mount with the ON/OFF switch facing towards

you. A groove on the back of the spindle will only

allow it to be inserted in the correct orientation,

with the cable exiting on the left side. Gently

reinsert the spindle.

IMPORTANT: Be sure to tighten the spindle mount

bolt after fully inserting the spindle into the

spindle mount.

Finally, ensure the switch is in the “OFF” position

and plug the spindle cable back into the side

of Origin.

Removing and Installing the SM1 Spindle

shapertools.com 98

Basics Basics

To change router bits, ﬁrst unplug the SM1

Spindle from Origin and remove it from the

spindle mount, as described earlier. Press the

collet lock while loosening or tightening the collet

locking nut with the included 19mm wrench. Do

not tighten the collet locking nut until a router bit

is inserted.

WARNING: Maximum allowable cutter diameter is

1 inch (25 mm).

Powering Origin

Plug Origin into a grounded wall outlet, either

directly, or through a properly rated extension

cord, surge protector, or power strip.

WARNING: Do not plug Origin into the switched

outlet available on some dust extractors.

Unlike most power tools, Origin has an internal

computer, making these outlets unsuitable for

Origin.

Changing the Router Bit

material

spoil board

table

When setting up your workpiece, use clamps,

adhesives, or other practical means to secure

the workpiece to a stable work table. It is

recommended to use a spoil board underneath

your material when doing a through-cut.

Safety ﬁrst. Always use eye and ear protection

when operating Origin. Always keep the ﬁnger

guard installed when the spindle is plugged in.

Keep ﬁngers and other body parts away from the

collet and the router bit.

shapertools.com 1110

Using ShaperTape™Using ShaperTape™

Using ShaperTape™

Origin uses ShaperTape to deﬁne your workpiece.

When you’re ready to cut with Origin, lay down

ShaperTape on the workpiece. For best results,

place strips of ShaperTape every 3 inches (8 cm)

or closer. Strips need not be parallel.

Only apply ShaperTape on the same plane as

your cut surface. Placing ShaperTape at different

heights will impact cut accuracy and quality.

Origin should be able to glide across any

ShaperTape you’ve put down. Ensure that

ShaperTape covers the area that you plan to cut,

as well as the space a few inches (or about 15 cm)

in front of your cut area so that Origin can always

see some markers. For more details on optimal

ShaperTape placement, visit

tutorials.shapertools.com.

Origin will operate correctly if there is

ShaperTape placed in the cutting area, as well

as the area in the ﬁeld of view of the camera.

Origin will also operate correctly if ShaperTape is

only placed in the ﬁeld of view of the camera.

shapertools.com 1312

Using ShaperTape™

Origin may not be able to function properly

if there is not enough ShaperTape within

the camera’s ﬁeld of view. There should be a

minimum of two rows of tape in the ﬁeld of view.

Origin will not operate if there is no ShaperTape

within the camera’s ﬁeld of view.

Warning! Read all safety

warnings and instructions.

Failure to follow the

warnings and instructions

in this booklet may result

in electric shock, ﬁre,

and/or serious injury.

Save all warnings and instructions for future

reference. The term “power tool” in the warnings

refers to a mains-operated (corded) power tool or

a battery-operated (cordless) power tool.

Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

Do not operate power tools in explosive

atmospheres such as in the presence of

ﬂammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

Keep children and bystanders away while

operating power tools. Distractions can cause

you to lose control.

Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiﬁed plugs and matching outlets will

reduce risk of electric shock.

Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges, and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

General Power Tool Safety Warnings

Work Area Safety

Electrical Safety

Safety & Care

shapertools.com 1514

Safety & Care Safety & Care

Do not expose power tools to rain or wet

conditions. Water entering the power tool will

increase the risk of electric shock.

Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating power tools outdoors use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk

of electric shock.

If operating a power tool in a damp location

is unavoidable, use a ground fault circuit

interrupter (GFCI) protected supply. Use of a GFCI

reduces the risk of electric shock.

Use appropriate extension cords. Only use

undamaged extension cords that match Origin’s

plug. Extension cords should have an adequate

voltage and current rating that meets or exceeds

the electrical speciﬁcations listed on the

product label.

Always make sure that the spindle motor

connector is securely plugged into the side of

Origin while operating.

Personal Safety

Stay alert, watch what you are doing and use

common sense when operating power tools. Do

not use power tools while you are tired, or under

the inﬂuence of drugs, alcohol, or medication.

A moment of inattention while operating power

tools may result in serious personal injury.

Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust masks, non-skid safety shoes, hard

hats, or hearing protection used for appropriate

conditions will reduce personal injuries.

Prevent unintentional starting. Ensure the switch

is in the OFF position before connecting to power

source, picking up or carrying the tool. Carrying

power tools with your ﬁnger on the switch or

energizing power tools that have the switch on

invites accidents.

Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or

jewelry. Keep your hair, clothing, and gloves

away from moving parts. Loose clothes, jewelry

or long hair can be caught in moving parts.

If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

shapertools.com 1716

Safety & Care Safety & Care

Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

Do not use the power tool if the switch does not

turn the spindle on and off. Any power tool that

cannot be controlled with the switch is dangerous

and must be repaired.

Disconnect the plug from the power source

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions

to operate the power tool. Power tools are

dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and

any other condition that may affect the power

tool’s operation. If damaged, have the power tool

repaired before use. Many accidents are caused

by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

Power Tool Use and Care

Have your power tool serviced by a qualiﬁed

repair person only using identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

Origin is covered by a warranty. Call or email

Shaper support (support.shapertools.com) if you

believe Origin requires servicing beyond what is

listed in the “Use and Care” section.

Service

Use the power tool, accessories, and tool bits

etc. in accordance with these instructions, taking

into account the working conditions and the

work to be performed. Use of the power tool for

operations different from those intended could

result in a hazardous situation.

Keep Origin’s mechanisms clean. Wearing suitable

eye protection, use vacuum to remove debris from

Origin’s mechanisms.

Periodically open chip tray to remove debris.

shapertools.com 1918

Safety & Care Safety & Care

Hold power tool by insulated gripping surfaces,

because the cutter may contact its own cord.

Cutting a “live” wire may make exposed metal

parts of the power tool “live” and shock the

operator.

Use clamps, or other practical ways to secure

and support the workpiece to a stable platform.

Holding the work with your hand or against the

body leaves it unstable and may lead to loss of

control. It is recommended to use a spoil board

underneath your material when doing a through

cut.

Adhere workpiece elements that may come

loose during cutting. When cutting items out of

workpiece materials, use PSA (Pressure Sensitive

Adhesive) or alternative methods to hold

elements down to your workbench and/or spoil

board. This will prevent items from coming loose

when cutting is complete.

Only use router bits with the correct shank size

for the SM1 Spindle and spindle collet supplied

with Origin. MAXIMUM ALLOWABLE CUTTER

DIAMETER IS 1” (25 mm).

Check work area for items added after

initial scan. Origin’s on-screen images are

reconstructions based on previous scans. They

may not show items on your workpiece that were

placed there after a scan. Always check your work

area for potential obstacles immediately before

routing.

Router Safety Warnings

Only operate Origin with the SM1 Spindle

provided by Shaper. Use with any other router

spindle will cause damage and may result in a

risk of electric shock.

Do not forcibly move the Z-Axis carriage up

and down. Doing so may cause damage to

Origin’s electronics.

Do not forcibly move the spindle mount from

side to side. Doing so may cause damage to

Origin’s electronics.

Cut at an appropriate depth per pass. Origin can

easily and consistently do multiple passes on

your design at increasing depths. Do not attempt

to cut deeper in one pass than Origin’s movement

stage or spindle can handle. If Origin sounds

like it is audibly struggling, reduce the depth of

your cut, change your material or router bit, or

adjust spindle speed. Visit support.shapertools.

com for recommendations on how to cut various

materials.

Cut at an appropriate feed rate. If Origin’s

correction range is unable to keep up with your

feed rate, move Origin slower, reduce the depth

of cut, change your router bit, and/or adjust the

spindle speed. Visit support.shapertools.com for

recommendations on appropriate feed rates for

various materials.

Use an appropriate router bit for your material.

Different materials cut best with different types of

router bits. Cutting with the wrong type of router

bit can negatively impact cut quality. Do not cut

with dull or damaged router bits. Visit support.

shapertools.com for recommendations on router

bit types to use with various materials.

shapertools.com 2120

Safety & Care Safety & Care

Use an appropriate spindle speed setting for

your material. Different materials and router bits

call for different spindle speeds. Faster is not

always better. Visit support.shapertools.com for

recommendations on spindle speed settings to

use with various materials and router bits.

Never operate Origin in a situation in which it

could come in contact with its own cord.

Use Origin with a dust extraction system. Origin

is designed to be used with a dust extraction

system at all times. Connect to a dust extractor

using an appropriately-sized hose or the hose

provided with Origin. For recommendations on

dust extractors visit support.shapertools.com.

Always operate Origin on a horizontal surface,

it is not intended to be used on a wall. Use of

Origin on a non-horizontal surface may result in

personal Injury.

Before performing a cut always make sure that

you have initiated a bit touch-off. Calibrating the

Z-Height of the router bit ensures that it does not

accidentally plunge into and damage the material

underneath your workpiece.

Unplug Origin’s plug from the power receptacle

in the wall to completely remove power supplied

to the tool. The spindle power switch removes

power supplied to the spindle only. The OFF

switch position does not remove power supplied

to the non-spindle portions of Origin.

Origin is a class I tool with double insulation

and/or reinforced insulation throughout.

Origin includes a earthing connection used for

functional grounding purposes.

Save all warnings and instructions

for future reference.

shapertools.com 2322

Safety & Care Compliance

Symbol

min

.../min

Name

Explanation

Safety Alert

Read Operators

Manual

Indicates a potential

personal injury hazard

To reduce the risk of injury,

the user must read and

understand the operator’s

manual before using this

product.

Volts

Amperes

Hertz

Minutes

Alternating Current

No Load Speed

Per Minute

Voltage

Electrical Current

Frequency

(cycles per second)

Time

Type of current

Rotational speed at no load

Revolutions, strokes, surface

speed, orbits etc., per minute

Noise and Vibration Information

The typical values determined in accordance with

EN 60745 are:

Sound-pressure level 77dB

Sound-power level 88dB

Measuring uncertainty allowance K = 3dB

Overall vibration levels (vector sum for three

directions) are measured in accordance with EN

60745:

Vibration emission level (3-axis) a

< 2,5m/s

Uncertainty K = 1,5m/s

The speciﬁed emissions values (vibration, noise):

• Are used to compare machines.

• Are used for making preliminary estimates

regarding vibration and noise loads during

operation.

• Represent the primary applications of the

power tool.

An increase of these values is possible for other

applications, with different cutting bits, or if the

tool is not maintained. Take note of idling and

downtimes.

Equivalent Isotropic Radiated Power

The maximum RF output power is declared as

follows, in accordance with EN 300 328:

Maximum Conducted Power 16.4dBm

Maximum Antenna Gain 2dBi

Equivalent Isotropic Radiated Power 18.4dBm

Class II Equipment

Double-insulated construction

shapertools.com 2524

Compliance

Guide d’utilisation

(version française)

Traduction de la notice originale

Table des matières

26 Ce qui est compris

28 Vue d’ensemble

30 Notions de base

34 Utilisation du ShaperTape™

37 Sécurité et entretien

48 Conformité

EU Declaration of Conformity

We declare under our sole responsibility that this

product:

Shaper Origin (SO1-EN, SO1-UN, SO1-SN, SO1-ON),

a Hand-held, motor-operated, electric router

complies with all the relevant requirements in the

following EU Directives:

• 2006/42/EC (Machinery Directive)

• 2011/65/EU (RoHS2)

• 2014/30/EU (Electromagnetic Compatibility)

• 2014/53/EU (Radio Equipment Directive)

standards or normative documents:

• EN 50581:2012

• EN 60745-1:2009 + A11:2010

• EN 60745-2-17:2010

• EN 55014-1:2006 + A2:2011

• EN 55014-2:1997 + A2:2008

• EN 61000-3-2:2014

• EN 61000-3-3:2013

• EN 300 328:2016 V2.1.1

• EN 301 489-1:2017 V2.2.0

• EN 301 489-17:2017 V3.2.0

San Francisco, California, USA / 2019-10-01

Jeremy Blum

Director of Engineering

Shaper Tools, Inc.

274 Shotwell St.

San Francisco, CA 94110

shapertools.com 2726

Ce qui est comprisCe qui est compris

Shaper Origin

Tuyau de collecte de poussière

ShaperTape™

Clé hexagonale à poignée

en T de 4 mm

Protège-doigts

Clé de 19 mm

Mèche à

queue de

toupie 3

Mèche à

queue de

toupie 6

Mèche à

graver

shapertools.com 2928

Vue d'ensembleVue d'ensemble

Écran tactile: L’écran multitactile de 12,7 cm

(5 po) d’Origin contrôle les nombreuses

fonctionnalités d’Origin.

Mandrin SM1: Origin est muni d’un puissant

moteur de 720 watts. Il comporte un contrôle de

vitesse variable et des fonctions électroniques

intégrées pour un démarrage en douceur, une

protection thermique et contre la surcharge et

une vitesse constante sous charge.

Sortie de poussière: Origin est destiné à être

utilisé avec un système d’extraction de la

poussière. Le port de sortie de poussière d’Origin

accepte plusieurs tuyaux communs de tailles

diverses, ou vous pouvez utiliser le tuyau fourni

avec Origin.

Commutateur du mandrin: Vous êtes en contrôle.

Pour votre sécurité, le mandrin SM1 ne s’allumera

jamais automatiquement. Mettez le commutateur

du mandrin en position Marche lorsque vous êtes

prêt à commencer le découpage.

Support du mandrin: Le mandrin SM1 est

conçu pour être amovible et permettre des

changements de mèches de toupie faciles et

sécuritaires. Après avoir desserré le boulon

du support du mandrin, retirez ou insérez

simplement le mandrin SM1.

Poignées: Saisissez toujours fermement les deux

poignées lorsque vous utilisez Origin. Les boutons

de chaque poignée correspondent aux fonctions

écran tactile

mandrin

sortie de poussière

commutateur du mandrin

support du mandrin

poignée

afﬁchées à l’écran.

Contrôle de vitesse: Le mandrin SM1 est à vitesse

réglable de 10 000 à 26 000 tr/min, dont la plus

basse vitesse correspond à 1 sur le cadran et la

plus haute vitesse, à 6. Utilisez ce cadran pour

ajuster la vitesse de rotation du mandrin. Pour la

liste des vitesses de coupe recommandées pour

divers matériaux et applications, visitez le site

support.shapertools.com.

Axe en Z: L’axe en Z d’Origin sert à baisser et à

remonter le mandrin SM1.

Douille de verrouillage: Poussez la douille de

verrouillage et utilisez la clé 19 mm fournie pour

changer la mèche de toupie du mandrin SM1.

Poignée arrière: En déplacement? Transportez

Origin au moyen de la poignée arrière.

Caméra: Origin utilise un système de vision par

ordinateur pour suivre son emplacement sur

la pièce à laquelle vous travaillez. Laissez le

champ de la caméra libre d’obstruction et gardez

le capot de lentille propre pour garantir une

expérience de coupe maximale.

Port USB: Pas de réseau? Pas de problème. Si

votre Origin n’est pas à portée d’un réseau Wi-

Fi, il vous est aussi possible d’y transférer des

ﬁchiers de conception à l’aide d’une clé USB.

contrôle de vitesse

axe en z

douille de verrouillage

poignée arrière

caméra

port usb

shapertools.com 3130

Notions de baseNotions de base

2. Faire glisser doucement le support du mandrin

et le mandrin vers le haut.

3. Retirez le verrou rouge du mandrin en le

basculant vers le haut et en le tirant vers l’avant.

Conservez le verrou de l’axe et du mandrin pour

une utilisation ultérieure. Réinstallez les deux

verrous pour maintenir le mandrin immobile

pendant le transport ou l’expédition.

1. Retirez le verrou rouge de l’axe en tirant

fermement sur la poignée circulaire.

Retrait du verrou de l’axe et du mandrin

IMPORTANT: Débranchez toujours le mandrin SM1

de l’Origin avant de retirer le mandrin de son

support.

Pour permettre de procéder sans encombre

au changement de mèche de la toupie, le

mandrin SM1 doit être retiré de l’Origin. Utilisez

la clé hexagonale à poignée en T de 4 mm pour

desserrer le boulon du support du mandrin. Une

fois desserré, soulevez le mandrin pour le retirer.

Pour réinstaller le mandrin, faites-le glisser à

l’intérieur du support en mettant le commutateur

Marche/Arrêt (ON/OFF) face à vous. Une rainure

derrière le mandrin permettra l’insertion si elle

est bien orientée, avec le câble sortant sur le côté

gauche. Réinsérez doucement le mandrin.

IMPORTANT: Veillez à bien resserrer le boulon du

support du mandrin après avoir inséré le mandrin

complètement dans son support.

Enﬁn, assurez-vous que le commutateur est sur

la position «Arrêt» (OFF), puis rebranchez le câble

du mandrin sur le côté de l’Origin.

Retrait et installation du mandrin SM1

La page charge ...

Shaper Origin SO1-SN Manuel utilisateur

Marque: Shaper

Modèle: Origin SO1-SN

Catégorie: Outils électroportatifs

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Shaper Origin SO1-SN User manual
Deutsch: Shaper Origin SO1-SN Benutzerhandbuch

Shaper Origin SO1-SN Manuel utilisateur

Ce manuel convient également à

Shaper Origin SO1-SN Manuel utilisateur

dans d''autres langues

Autres documents