ickle bubba Solar Group 1-2-3 Car Seat Mode d'emploi

ECE R44/04 GROUP: 1 + 2 + 3 (9-36kg)

Solar

English P.1-20

Français P.21-40

Deutsch P.41-60

Español P.61-80

Italiano P.81-100

Nederlands P.101-120

CONTENTS

Item: Solar Car Seat (approx 9-36kg)

Group 1 (approx 9kg to 18kg / 15 months to 4 years)

Group 2 and 3 (approx 15kg to 36kg / 3 years to 12 years)

Thank you for purchasing this Group 1+2+3 car seat. If you are

not completely satisﬁed with the car seat or you would like to

change any accessory or obtain any help about the car seat,

please contact our customer services department.

Please Note: Only suitable for use in vehicles ﬁtted with a 3 point

retractable safety belt or lsoﬁx attachments.

STORAGE OF THE USER GUIDE

It is very important that these instructions remain with the car

seat at all times. You can store these instructions in the pocket

provided on the back of your car seat (2).

Please read this instruction manual carefully before use. When

installing with lsoﬁx refer to your vehicle's handbook.

CAR SEAT FEATURES --------------------------------------------5-6

FITTING SIDE IMPACT PROTECTION CUSHIONS ---------------- 7

GROUP 1 FITTING INSTRUCTIONS(9-18KG) -------------------7-10

PLACING YOUR CHILD IN THE CAR SEAT -------------------11-13

SAFETY HARNESS SETTING AND ADJUSTMENT ----------13-15

GROUP 2 + 3 FITTING INSTRUCTIONS(15-36KG) -----------16-17

REMOVING AND CLEANING THE BUCKLE ---------------------18

ADJUSTING THE REVERSIBLE MATERIALS --------------------18

ADDITIONAL INFORMATION --------------------------------------19

PRODUCT WARRANTY --------------------------------------------20

1

Airbags can cause injury. Do not use this child seat on a

passenger seat ﬁtted with a front airbag unless it can be

deactivated.

Always give preference to using the rear seats of your vehicle

even if your highway code permits the use on the front seat.

Check your highway code as this regulation may vary accord-

ing to the country. Check the vehicle manual for advice on

ﬁtting your car seat in the front of the vehicle.

Buckle failure will cause injury. Do not oil any part of the buckle.

Always check there is no food debris or other such matter in

the harness buckle.

Never use the car seat without the backrest as it will not

protect your child in the event of an accident.

A correctly adjusted harness is essential for your child's protec-

tion. There should not be more than two ﬁngers width between

the harness and your child.

Toxic cleaning ﬂuids can cause illness. Never use bleach, do not

iron, do not machine wash, do not tumble dry as this could

damage the cover and require replacing.

The buckle of the vehicle belt must not come above the lap

belt guide of the child seat. Contact our customer service

department if this occurs.

Always replace the car seat after an accident, in case of any

unseen damage.

Do not use the car seat without the seat cover. Do not replace

the seat cover with any cover other than the one recommend-

ed by the manufacturer, as it directly inﬂuences the safety

performance of the car seat.

Ensure that your car seat is secured at all times while in the

vehicle using the vehicles seat belt or lsoﬁx system, even when

not in use. An unsecured car seat can cause injuries in the

event of a collision.

•

WARNING !

2

Keep these instructions with the car seat in case you need to

refer to them again in the future. Failure to follow these instruc-

tions may a˛ ect your child's safety.

Your car seat must be positioned and installed so that, under

normal vehicle usage conditions, no part can become jammed

under or between any moveable seat or in the vehicle door.

Do not modify or add to your car seat in any way without the

approval of a competent authority or the manufacturer, as this

will void any warranty.

Shade your car seat from sunlight to avoid hot items causing

injury to your child.

Do not leave your child unattended when in the car seat and in

the vehicle.

Make sure there is no loose luggage or other large objects that

are likely to cause injuries in the event of an accident. These

may cause injury to other occupants. Always secure loose

items.

The car seat may acquire some wear and tear over the years,

which may result in parts requiring replacement, please

contact our customer services department for replacement

parts.

Make sure all hard or plastic parts are stored away when not in

use and therefore cannot be misplaced.

During cold winter conditions take care that any change of

clothing has not reduced the tension and e˛ ectiveness of the

car seat harness.

•

GENERAL SAFETY INSTRUCTIONS

3

PREPARING YOUR CAR SEAT FOR USE

Before using your new car seat it is important to understand fully

how to install your car seat properly, secure your child correctly

and familiarise yourself with the features and functions of the

seat.

Please take the time to read and understand these instructions

fully. This is best done with the seat in front of you. Please always

read the safety warnings. Before using the seat in your vehicle

you should prepare the seat for your child by setting the harness

correctly.

4

5

CAR SEAT FEATURES

1. Headrest Adjustor

2. Base

3. Top Tether

4. User Guide Box

5. Tension Indicating Adjustor

6. Top Tether Lock Hook

7. lsoﬁx Connectors (x2)

8. Guide Hook (for 15-25kg children)

9. Jointshaft

10. Buckle Retainer

11. Side Impact Protection

12. Lock Clips (for 9-18kg children)

13. Lap Belt Guide (for 15-25kg children)

14. Belt Slots

15. lsoﬁx Point Release Buttons (x2)

16. lsoﬁx Connection Indicators

17. Headrest

18. Belt Slots

19. Harness Shoulder Straps

20. Buckle Pad (Reversible)

21. Harness Adjustment Button

22. Adjustment Patch Strap

23. Headrest Cushion (Reversible)

24. Harness Pads (x2)

25. Seat Cushion (Reversible)

26. Harness Adjustment Strap

27. Recline Lever

28. lsoﬁx System Regulator

29. Adult Seat Belt Buckle

30. Adult Seat Belt Connector

31. Harness Connectors

6

& 32.

7

FITTING SIDE IMPACT PROTECTION CUSHIONS

Line up the two tabs located on the Side Impact Protection

panels to the two holes located on the side of the car seat (A-1).

Push inwards and upwards until the panel clicks into place (A-2).

NOTE! If you are short of space there is the option to only ﬁt the

side closest to the vehicle door

GROUP 1 FITTING INSTRUCTIONS (9-18kg)

WARNING! ALWAYS GIVE PREFERENCE TO USING THE REAR

SEATS OF YOUR VEHICLE EVEN IF YOUR HIGHWAY CODE

PERMITS THE USE OF THE FRONT SEAT, CHECK YOUR

HIGHWAY CODE AS THIS REGULATION MAY VARY. CHECK

YOUR VEHICLE MANUAL FOR ADVICE ON FITTING YOUR CAR

SEAT IN THE FRONT OF THE VEHICLE. AIRBAGS CAN CAUSE

INJURY. DO NOT USE THIS CHILD SEAT ON A PASSENGER SEAT

FITTED WITH A FRONT AIRBAG.

A- 1 A- 2

8

INSTALLING WITH ISOFIX AND TOP TETHER

Your car seat can be installed using Isoﬁx and a top tether strap.

Pull the red button out, the Isoﬁx connector will come out automatical-

ly. (B-1)

Unlock the Isoﬁx connectors of the car seat by pushing the Isoﬁx point

release button(lS)(B-2).

Open the plastic panel to get the top tether out and close the panel.

(B-3)

Hook the top tether strap on the anchor bracket and fasten the belt

tightly. (B-4)

Place the car seat on the vehicle seat and connect the lsoﬁx connectors

to the vehicle Isoﬁx attachments (B-5). There will be an indicator visible

on the connector.

Attach the Isoﬁx connectors until the Isoﬁx connection indicators (16)

turn from red to green and a click is heard (B-6). This will mean the seat

is locked into position.

Once in place pull the lsoﬁx adjustor button until tight and the car seat

is tight against the vehicle seat back rest.

The top tether is located at the top of the seat back. Extend the

length by squeezing the tension indicating adjustor. Locate the

vehicle attachment point which may be found on the parcel

shelf, back of the seat or the rear boot area and hook on.

Tighten the tether strap (B-7) until the adjustor indicator shows

green (B-8).

THREE RECLINING POSITIONS(A)

Three reclining positions:

By pulling the red recline lever up,

you can choose from the following

positions for your child:

• 1. Upright

• 2. Mid-Recline

• 3. Full Recline

9

10

11

PLACING YOUR CHILD IN THE CAR SEAT

Loosen the harness: Press on the central adjustor button (21)

(F-1) and pull on the harness shoulder straps (l9).

Adjusting the Headrest: the child' s head should sit directly in

the middle of the headrest and the sides of the headrest should

sit just above the child's shoulders.

To adjust the headrest pull the headrest adjustor (1) to release

the latch from the back of the seat, pull the headrest up and

locate the dial into one of the slots on the headrest (F-2)(F-3).

Ensure the headrest does not obstruct the child's shoulders.

Also make sure that the top of the child's head does not exceed

the top of the headrest.

Open the harness buckle by pressing ﬁrmly on the red button in

the centre of the buckle (F-5). Spread apart the shoulder straps

to buckle retainers (l0) to enable the child to be placed (F-6).

Place the child into the car seat, ensuring that they are seated

upright against the backrest. Pass the child's arm through each

of the shoulder straps (F-7) whilst bringing together the

harness connectors (31), align them together and insert into the

buckle until you hear a “c1ick” (F-8).

Tighten the harness: Pull ﬁrmly on the harness adjustment

strap(26) at the front of the seat; it is not necessary to press on

the central adjuster button (F-9).

12

NOTE !

1. The tighter the belts are around the child, the better the

protection.

2. Check that the textured side of the belt pads are on the

shoulders of the child.

3. The belts should never be twisted.

4. If you are unable to click the tongue sections in the buckle,

unblock the buckle by pressing the red button and try again.

5. If you are not able to fasten the harness belt properly or pull

it tight, contact your supplier immediately. Under no circum-

stances use the product.

SAFETY HARNESS SETTING AND ADJUSTMENT

The car seat harness must be set to the size of the child.

The harness is ﬁve-point with shoulder, lap and crotch straps.

The shoulder straps (25) have individual shoulder pads (20).

The harness shoulder straps ﬁt into a set of slots in the seat back

and they must be passed through the slots over the child's

shoulders.

13

Loosen the harness by pressing the harness adjustor button

while pulling the shoulder straps forward as far as possible (G-1).

Seperate the backrest from the base by turning and removing

the jointshaft from the joint between the base and the backrest

(G-2). Unhook the shoulder harness from the metal hooks which

sits between the backrest and base (G-3).

Take o˛ the cover of the headrest, unscrew the cap at the back

of the headrest (see ﬁg. G-4) Then uninstall the slide and harness

shoulder belt shaft (G-5).

The headrest can now extend futher.

14

To remove the Harness

System, pull the straps

through the shell and cover to

the front of the restraint (G-6).

Remove the Crotch Strap and

feed the metal plate found

under the base through the

slot (G-7).

Uninstall the Harness Buckle

(G-8).

15

GROUP 2+3 FITTING INSTRUCTION (15-36kg)

Securing the child with the Adult Seat Belt (Group 2-3)

Place the car seat against the backrest of the vehicle seat.

Check that the headrest of the vehicle seat does not obstruct

the car seat. If this is the case then adjust or remove the vehicle

headrest. With your child sitting upright and back in the seat,

pull the adult seat belt and pass it across the front of the child.

Pass the lap section of the adult belt over the child' s lap and

under the armrest on both sides of the seat. Ensure the lap belt

is low down on the child's lap and ﬁrmly engaging with the

pelvis. Fasten the adult seat belt connector to the seat belt

buckle (H-2).

Locate the upper portion of the diagonal section of the adult

belt into the diagonal shoulder belt guide located on the top

corner of the back rest (H-1) (8).

Make sure the seat belt is not twisted and remove the slack

(H-3).

Incorrect installation method (H-4).

1. Check the position of the seat belt buckle, ensuring that it is

not being pulled around the child seat onto the red lap belt

guide.

2. Feed the diagonal section of the vehicle belt through the

upper belt guide on the opposite side to the buckle.

16

WARNING! Your child’s safety

depends on the correct installa-

tion of your car seat before

every use.

IMPORTANT! Incorrect installa-

tion of your car seat will reduce

the protection and safety it

provides your child.

17

La page est en cours de chargement...

ickle bubba Solar Group 1-2-3 Car Seat Mode d'emploi

ickle bubba Solar Group 1-2-3 Car Seat Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents