Ci-dessous, vous trouverez de brèves informations pour Caméra extérieure sans fil TWC200WU. La caméra extérieure sans fil capture les événements autour de votre propriété. Vous permet de visualiser et de communiquer avec vos visiteurs de n'importe où. L'appareil peut être configuré en utilisant l'application Toucan. La caméra peut être fixée à l'aide d'un support magnétique ou d'un adhésif.
Ci-dessous, vous trouverez de brèves informations pour Caméra extérieure sans fil TWC200WU. La caméra extérieure sans fil capture les événements autour de votre propriété. Vous permet de visualiser et de communiquer avec vos visiteurs de n'importe où. L'appareil peut être configuré en utilisant l'application Toucan. La caméra peut être fixée à l'aide d'un support magnétique ou d'un adhésif.
Wall Anchors Screws Adhesive Tape
Warranty Card
Quick Start Guide
Thank You Card
Charging Cable
Items included
Wireless outdoor camera
Wireless outdoor camera captures events around your property.
View and communicate with your visitors from anywhere.
TWC200WU
Magnetic Base MountWireless Outdoor Camera
EN Get to know your wireless outdoor camera
Magnetic
base mount
Camera lens
Light sensor
motion sensor
LED indicator
SET button
RESET button
Speaker
Microphone
Tripod screw hold
Mirco USB plug
Charge your wireless outdoor camera
Open the bottom cover, plug in
the micro USB cable to charge
the camera.
Recommend to fully charge the device before 1st use.
Solid Red
Solid Blue
Charging Battery
Battery Fully Charged
LED
Description
Install your wireless outdoor camera
Setup your wireless outdoor camera
LED
Description
Flashing BLUE
Flashing PURPLE
Flashing RED
Setup Mode
Connecting to cloud server
Connection Failed
If using 3M adhesive only, please allow 24-48 hours before placing the camera onto the mounting base
to ensure maximum bonding strength. Apply 3M adhesive to dry surfaces only.
You can mount the camera using just the adhesive on UPVC, wooden or smooth surface door frames
(not suitable for brick or stone)
*
**
Download Toucan app
www.toucansmarthome.com/pages/smarthomeapp
Available at Apple© App Store© and Google Play™
Scan QR code or visit
Open the app to add camera. Press and hold the SET button until LED
light blinks to enter the setup mode.
Follow the camera voice navigation
to complete setup.
After setup and pairing, you can
change the language of your app
within settings section
Language
Settings
For FAQ’s, Video’s and support, please visit our website: www.toucansmarthome.co.uk
Regulations & compliance
FCC Statement
©2021 VUPOINT SOLUTIONS, INC. All Rights Reserved.
The Toucan logo and Toucan are trademarks or registered trademarks of VuPoint Solutions Inc. in the United States and
other countries. App Store is a registered trademark of Apple Inc. iOS is a registered trademark of Cisco Technology,
Inc. in the U.S. and other countries and is under license. Android and Google Play are registered trademarks of Google
LLC. Product names, logos, brands and other trademarks referred to herein are the property of their respective
trademark holders. All trademarks remain the property of their respective holders, and are used only to describe the
products or services being provided. These trademark holders are not affiliated with VuPoint Solutions, Inc. They do not
sponsor or endorse VuPoint Solutions, Inc’s products or services.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipemnt has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installaction. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including intereference that may cause undesired operation.
ISED Regulatory Compliance
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s lincence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation,
Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre
le fonctionnement.
RF Exposure Compliance
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Cet équipement est conforme aux limites d’exposition aux radiations FCC/IC établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.
EU Compliance
VuPoint (Europe) Company Limited declares that the equipment complies with Directive 2014/53/EU.
Full declaration text available at: www.toucansmarthome.co.uk/pages/certificates
VuPoint Solutions, Inc. (USA):
710 Nogales Street, City of Industry, CA 91748
VuPoint (Europe) Company Limited:
Innovation Center, Longbridge Technology Park,
Longbridge, Birmingham B31 2TS
Follow us for the latest updates:
Facebook.com/toucansmarthomeeu
Instagram.com/toucansmarthomeeu
YouTube.com/toucansmarthome
For Europe and UK region, please visit www.toucansmarthome.co.uk
For North and South America, please visit www.toucansmarthome.com
-
1
Ci-dessous, vous trouverez de brèves informations pour Caméra extérieure sans fil TWC200WU. La caméra extérieure sans fil capture les événements autour de votre propriété. Vous permet de visualiser et de communiquer avec vos visiteurs de n'importe où. L'appareil peut être configuré en utilisant l'application Toucan. La caméra peut être fixée à l'aide d'un support magnétique ou d'un adhésif.
dans d''autres langues
- English: TOUCAN TWC200WU User guide
Documents connexes
Autres documents
-
Risco VUpoint RVCM32W Guide d'installation
-
VuPoint RVCM11W Guide d'installation
-
-
-
-
-
TP-LINK KC200 Mode d'emploi
-
Legrand RT-20 Mode d'emploi
-
Alula CAM-OD-JS1-AI Guide d'installation
-
Pentax K-3 Mark III Le manuel du propriétaire
