Pentax K-3 Mark III Le manuel du propriétaire

Marque: Pentax

Modèle: K-3 Mark III

Taper: Le manuel du propriétaire

RICOH IMAGING COMPANY, LTD.

1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN

(http://www.ricoh-imaging.co.jp)

RICOH IMAGING EUROPE

S.A.S.

Parc Tertiaire SILIC 7-9, avenue Robert Schuman - B.P. 70102,

94513 Rungis Cedex, FRANCE

(http://www.ricoh-imaging.eu)

RICOH IMAGING AMERICAS

CORPORATION

2 Gatehall Drive Suite 204, Parsippany, New Jersey 07054, U.S.A.

(http://www.us.ricoh-imaging.com)

RICOH IMAGING CANADA

INC.

5560 Explorer Drive Suite 100, Mississauga, Ontario, L4W 5M3, CANADA

(http://www.ricoh-imaging.ca)

RICOH IMAGING CHINA CO.,

LTD.

Room A 23F Lansheng Building, 2-8 Huaihaizhong Road, Huangpu District,

Shanghai, 200021, CHINA

(http://www.ricoh-imaging.com.cn)

http://www.ricoh-imaging.co.jp/english

This contact information may change without notice.

Please check the latest information on our websites.

SLR Digital Camera

Wireless Communication Guide

To ensure the best performance from your

camera, please read the Wireless

Communication Guide before using the

camera.

Model No. R03010

• Specifications and external dimensions are subject to

change without notice.

R01DTL20 Printed in Philippines

*4RE2Z030*

e_kb582_wg_cover.fm Page 1 Thursday, December 10, 2020 2:05 PM

• Do not use the camera in a place where electrical products,

AV/OA devices, and so on generate magnetic fields and

electromagnetic waves.

• If the camera is affected by magnetic fields and

electromagnetic waves, it may not be able to communicate.

• If the camera is used near a TV or a radio, poor reception or

TV screen glitch may occur.

• If there are multiple wireless LAN access points or Bluetooth

devices near the camera and the same channel is used,

search operation may not be executed correctly.

This camera conforms to the technical standards under the

Radio Law and Telecommunications Business Law and the

certification of conformance to technical standards can be

displayed on the monitor.

• Microsoft and Windows are registered trademarks of

Microsoft Corporation in the United States of America and

other countries.

• Mac and macOS are trademarks of Apple Inc., registered in

the U.S. and other countries.

• IOS is a trademark or registered trademark of Cisco in the

U.S. and other countries and is used under license.

• Intel and Intel Core are trademarks of Intel Corporation in the

U.S. and/or other countries.

• SDXC Logo is a trademark of SD-3C, LLC.

• The Bluetooth

word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc., and any use of

such marks by Ricoh Company, Ltd. is under license.

• USB Type-C is a trademark of USB Implementers Forum.

• HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing, LLC in the United States and/or other countries.

All other trademarks are the property of their respective owners.

• This product uses the RICOH RT font designed by Ricoh

Company Ltd.

About the Wireless LAN and Bluetooth

Functions

In the frequency band used by the camera, along with

industrial, scientific, and medical devices such as

microwave ovens, premises radio stations (wireless

stations requiring license) and specified low power radio

stations (wireless stations not requiring license) for mobile

object identification used in factory production lines, etc.,

and amateur radio stations (wireless stations requiring

license) are operated.

1. Before using the camera, confirm that premises radio

stations and specified low power radio stations for

mobile object identification and amateur radio stations

are not operated in the vicinity.

2. In the event that the camera causes harmful radio wave

interference to premises radio stations for mobile object

identification, immediately change the frequency being

used to avoid interference.

3. If you have other troubles such that the camera causes

harmful radio wave interference to specified low power

radio stations for mobile object identification or to

amateur radio stations, contact your nearest service

center.

Displaying the Certification Marks

1. Press F to display the menu screen.

2. Use ABCD to display the D6 menu (Maintenance).

3. Use ABCD to select [Certification Marks], and press

Trademarks

For Customers in Thai

This telecommunication equipment conforms to the

requirements of the Office of the National Broadcasting and

Telecommunications Commission.

e_kb582_wg_cover.fm Page 2 Thursday, December 10, 2020 2:05 PM

You can connect the camera to a communication device

wirelessly via Bluetooth

or wireless LAN.

By using the dedicated app “Image Sync”, the camera can be

operated from the communication device and the images saved

in the memory cards can be displayed on the communication

device to import them.

t Memo

• You can easily connect the camera to a communication

device using “Image Sync” installed on the communication

device. Refer to “Operating the Camera with a

Communication Device” (p.4) for details on “Image Sync”.

• The captured images can be transferred to the

communication device by specifying them in [File Transfer] of

the C2 menu. The images can also be transferred

automatically after shooting. (p.4) When transferring the

images, connect the camera to the communication device via

a wireless LAN.

• The Bluetooth

connection and the wireless LAN connection

can be switched using “Image Sync”.

• For details on using the camera with the communication

device, refer to the manual of the device used and the “Image

Sync” website.

u Caution

• Do not attempt to use the Bluetooth

and wireless LAN

functions in a location where the use of wireless

communication devices is restricted or prohibited, such as on

airplanes.

• When using the Bluetooth

or wireless LAN function, observe

local laws and regulations governing wireless

communications.

1 Enable the Bluetooth

function of the

communication device.

2 Select [Bluetooth Setting] in the D4 menu, and

press D.

The [Bluetooth Setting] screen appears.

3 Set [Action Mode] to [On].

4 Select [Pairing], and press D.

5 Select [Execute Pairing],

and press E.

Pairing starts.

[Device Name] of connectable

the camera is displayed.

6 In the list of available devices displayed on the

Bluetooth

setting screen of the communication

device, enter the device name of the camera.

[Authentication Code] is displayed on the camera.

7 Enter the displayed authentication code on the

communication device.

The connection status icon appears when the camera is

connected to the communication device via Bluetooth

u Caution

• When the operating system of the communication device is

iOS, use “Image Sync” to connect the camera to the

communication device. Refer to “Operating the Camera with

a Communication Device” (p.4) for details on “Image Sync”.

Using the Camera with a

Communication Device

Connecting to a Communication

Device via Bluetooth

Execute Pairing

Paired Devices

Pairing

t Memo

• Once the pairing is established, when [Action Mode] is set to

[On] in [Bluetooth Setting] of the D4 menu, you can connect

the camera to the communication device via Bluetooth

only

by turning on the communication device and camera.

• Select [Communication Info.] on the [Bluetooth Setting]

screen displayed in Step 3 to display the device name of the

camera.

• Select [Paired Devices] in Step 5 to display the list of paired

communication devices. The pairing can be established with

up to six communication devices. Press M on this screen to

cancel the pairing.

• When the pairing cannot be established from the camera,

execute the pairing from the communication device.

Enable the wireless LAN function using one of the following

methods.

• Setting from the menu or control panel

• Turning the camera on while pressing 3

• Using the Fx button

• Operating the communication device connected via

Bluetooth

When the wireless LAN function is

enabled, the 7 (white) icon

indicating the wireless LAN

communication status is displayed on

the status screen and Live View

screen. When 8 (gray) is displayed,

a connection with the communication

device is not established correctly.

t Memo

• Even after the wireless LAN function is enabled, it returns to

an inactive state when the camera is turned off and on again.

• Auto Power Off is not available while a wireless LAN

connection is established or images are being transferred. If

Auto Power Off is activated while a connection is not

established, the wireless LAN function is disabled. The

function is enabled when the camera recovers from Auto

Power Off.

u Caution

• The wireless LAN function is disabled while the camera is

connected to a computer with a USB cable (except when the

power is supplied with the AC adapter).

• The camera does not support communication using a

memory card with a built-in wireless LAN function (such as an

Eye-Fi card or Flucard).

Connecting to a Communication Device via

a Wireless LAN

1 0 : 1 010:10

1 /1/

250250

1600

5.65.6

0 1 / 0 1 / 2 0 2 101/01/2021

9 9 9 99999

1 Select [Wireless LAN Setting] in the D4 menu,

and press D.

The [Wireless LAN Setting] screen appears.

2 Set [Action Mode] to [On].

Set [Action Mode] to [Off] to

disable the wireless LAN

function.

3 Press F twice.

t Memo

• In Step 2, select [Communication Info.] to check [SSID],

[Password], and [MAC Address] of the wireless LAN. Or,

press M to reset the settings to their default values.

The wireless LAN function can be enabled in the playback mode

from the power-off state of the camera.

1 With the camera turned off, turn the main switch

to [ON] while pressing 3.

2 Keep pressing 3 for about 2 seconds.

The camera is turned on in the playback mode and the

wireless LAN function is enabled.

If you register the wireless LAN function to the customizable

function button (Fx button) in advance, you can enable and

disable the function by a simple button operation.

1 Register [Wireless LAN Setting] to the desired

button following the procedures described in

the Operating Manual.

2 Press the button with [Wireless LAN Setting]

registered.

The wireless LAN function is enabled or disabled.

Setting from the Menu D4

Turning the Camera on While Pressing the

Playback Button

Action Mode

Communication Info.

Wireless LAN Setting

Using the Fx Button E2

The camera can be connected to a communication device via

Bluetooth

or wireless LAN.

The following functions are available with the dedicated app

“Image Sync”.

“Image Sync” supports iOS and Android™, and can be

downloaded from the App Store or Google Play™. For the

supported operating system and other details, refer to the

download site.

t Memo

• For how to connect the camera to a communication device

and details on the “Image Sync”, refer to the following

website.

http://www.ricoh-imaging.co.jp/english/products/app/

image-sync2/

• When the camera is connected to the communication device

via Bluetooth

, the wireless LAN function is enabled or

disabled automatically depending on the situation.

• For details on how to operate the communication device,

refer to the manual of the device.

You can make the following settings in [Smartphone Link] of the

D4 menu.

Operating the Camera with a

Communication Device

Remote Capture

Displays the Live View image of the

camera on the communication device, and

enables controlling exposure settings and

shooting by operating the communication

device.

Image View

Displays the images saved on the memory

card inserted in the camera on the

communication device and imports the

images to the communication device.

Time

Synchronization

Synchronizes the date and time displayed

on the camera with the date and time

settings of the communication device.

Setting Functions Linked with the

Communication Device

Store Location

Info.

Records the location information of the

communication device in captured

images.

Auto Image

Transfer

Automatically sets the transfer reservation

for captured images after shooting.

Select the format of transferred files.

Auto Resize

Reduces the number of recorded pixels of

a JPEG image to r and transfers it.

Image Transfer

while Off

Continues the image transfer even when

the camera is turned off midway through

the transfer.

Model Description

Wireless LAN

Bluetooth

Power Supply

Interfaces

Dimensions and Weight

Operating Environment

Included Accessories

Model/Type

R03010

TTL autofocus, auto-exposure SLR digital camera

Lens Mount

PENTAX KAF2 bayonet mount (AF coupler, lens

information contacts, K-mount with power contacts)

Compatible

Lenses

KAF4, KAF3, KAF2 (power zoom compatible), KAF,

KA mount lenses

Standards IEEE 802.11b/g/n (standard wireless LAN protocol)

Frequency

(Center

Frequency)

2412 to 2462 MHz (channels: Ch 1 to Ch 11)

Security

Authentication: WPA2

Encryption: AES

Standards Bluetooth

v4.2 (Bluetooth Low Energy)

Frequency

(Center

Frequency)

2402 to 2480 MHz (channels: Ch 0 to Ch 39)

Battery Type Rechargeable Lithium-ion Battery D-LI90

AC Adapter AC Adapter Kit K-AC166 (optional)

Connection Port

USB terminal (USB Type-C), Cable release terminal

(2.5 mm dia.), X-sync socket, HDMI

terminal (type

D), Microphone terminal, Headphone terminal

USB Connection

USB 3.2 Gen 1

Data transfer: MTP, CD-ROM

Battery recharge, Power supply to the camera (when

the dedicated AC adapter is used)

Dimensions

Approx. 134.5 mm (W) × 103.5 mm (H) × 73.5 mm (D)

(excluding protrusions)

Weight

Approx. 820 g (including the dedicated battery and

an SD Memory Card)

Approx. 735 g (body only)

Temperature -10 to 40°C (14 to 104°F)

Humidity 85% or less (no condensation)

Package

Contents

Strap O-ST162, ME Viewfinder Cap, Rechargeable

Lithium-ion Battery D-LI90, USB power adapter,

Power plug, USB cable I-USB166

<Mounted to the camera> Eyecup FU, Hot shoe

cover FK, Sync socket 2P cap, Body mount cap K II,

Battery grip terminal cover

Software Digital Camera Utility 5

For Customers in USA

STATEMENT OF FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may

cause undesired operation.

FCC CAUTION:

Changes or modifications not approved by the party responsible

for compliance could void the user’s authority to operate the

equipment.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference t o

radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

The available scientific evidence does not show that any health

problems are associated with using low power wireless devices.

There is no proof, however, that these low power wireless

devices are absolutely safe. Low power Wireless devices emit

low levels of radio frequency energy (RF) in the microwave

range while being used. Whereas high levels of RF can produce

health effects (by heating tissue), exposure of low-level RF that

does not produce heating effects causes no known adverse

health effects. Many studies of low-level RF exposures have not

found any biological effects. Some studies have suggested that

some biological effects might occur, but such findings have not

been confirmed by additional research. R03010 has been

tested and found to comply with FCC radiation exposure limits

set forth for an uncontrolled environment and meets the FCC

radio frequency (RF) Exposure Guidelines.

Declaration of Conformity

According to 47CFR, Parts 2 and 15 for

Class B Personal Computers and Peripherals

We: RICOH IMAGING AMERICAS

CORPORATION

Located at: 2 Gatehall Drive Suite 204,

Parsippany, New Jersey 07054,

U.S.A.

Phone: 800-877-0155

Declare under sole responsibility that the product identified

herein complies with 47CFR Parts 2 and 15 of the FCC rules as

a Class B digital device. Each product marketed is identical to

the representative unit tested and found to be compliant with the

standards. Records maintained continue to reflect the

equipment being produced can be expected to be within the

variation accepted, due to quantity production and testing on the

statistical basis as required by 47CFR §2.909. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) This device must accept

any interference received, including interference that may

cause undesired operation. The above named party is

responsible for ensuring that the equipment complies with the

standards of 47CFR §15.101 to §15.109.

Product Name: Digital Camera

Model Number: R03010

Contact Person: Customer Service Manager

Date and Place: September, 2020 Parsippany

For Customers in Canada

Innovation, Science and Economic Development Canada

(ISED) Regulatory Compliance Notice

This Class B digital apparatus complies with Canadian ICES-

003 (B).

This device contains licence-exempt transmitter(s)/receiver(s)

that comply with Innovation, Science and Economic

Development Canada’s licence-exempt RSS(s). Operation is

subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including

interference that may cause undesired operation of the

device.

The available scientific evidence does not show that any health

problems are associated with using low power wireless devices.

There is no proof, however, that these low power wireless

devices are absolutely safe. Low power wireless devices emit

low levels of radio frequency energy (RF) in the microwave

range while being used. Whereas high levels of RF can produce

health effects (by heating tissue), exposure of low-level RF that

does not produce heating effects causes no known adverse

health effects. Many studies of low-level RF exposures have not

found any biological effects. Some studies have suggested that

some biological effects might occur, but such findings have not

been confirmed by additional research. The R03010 has been

tested and found to comply with ISED radiation exposure limits

set forth for an uncontrolled environment and meets RSS-102

of the ISED radio frequency (RF) Exposure rules.

Pour les utilisateurs au Canada

Avis de conformité à la réglementation d’Innovation,

Sciences et Développement économique Canada (ISDE)

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 (B) du Canada.

L’émetteur/récepteur exempt de licence contenu dans le

présent appareil est conforme aux CNR d’Innovation, Sciences

et Développement économique Canada applicables aux

appareils radio exempts de licence. L’exploitation est autorisée

aux deux conditions suivantes :

1. L’appareil ne doit pas produire de brouillage ;

2. L’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le

fonctionnement.

Les connaissances scientifiques dont nous disposons n’ont mis

en évidence aucun problème de santé associé à l’usage des

appareils sans fil à faible puissance. Nous ne sommes

cependant pas en mesure de prouver que ces appareils sans fil

à faible puissance sont entièrement sans danger. Les appareils

sans fil à faible puissance émettent une énergie fréquence

radioélectrique (RF) très faible dans le spectre des micro-ondes

lorsqu’ils sont utilisés. Alors qu’une dose élevée de RF peut

avoir des effets sur la santé (en chauffant les tissus),

l’exposition à de faibles RF qui ne produisent pas de chaleur n’a

pas de mauvais effets connus sur la santé. De nombreuses

études ont été menées sur les expositions aux RF faibles et

n’ont découvert aucun effet biologique. Certaines études ont

suggéré qu’il pouvait y avoir certains effets biologiques, mais

ces résultats n’ont pas été confirmés par des recherches

supplémentaires. Le R03010 a été testé et jugé conforme aux

limites d’exposition aux rayonnements ISDE énoncées pour un

environnement non contrôlé et respecte les règles d’exposition

aux fréquences radioélectriques (RF) CNR-102 de l’ISDE.

For Customers in Europe

Information for Users on Collection and Disposal of Old

Equipment and Used Batteries

1. In the European Union

These symbols on the products, packaging and/

or accompanying documents mean that used

electrical and electronic equipment and batteries

should not be mixed with general household

waste.

Used electrical/electronic equipment and

batteries must be treated separately and in

accordance with legislation that requires proper

treatment, recovery and recycling of these

products.

By disposing of these products correctly you will

help ensure that the waste undergoes the

necessary treatment, recovery and recycling

and thus prevent potential negative effects on

the environment and human health which could

otherwise arise due to inappropriate waste

handling.

If a chemical symbol is added beneath the symbol shown

above, in accordance with the Battery Directive, this indicates

that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead)

is present in the battery at a concentration above an applicable

threshold specified in the Battery Directive.

For more information about collection and recycling of used

products, please contact your local authorities, your waste

disposal service or the point of sale where you purchased the

products.

2. In other countries outside the EU

These symbols are only valid in the European Union. If you wish

to discard used products, please contact your local authorities

or dealer and ask for the correct method of disposal.

For Switzerland: Used electrical/electronic equipment can be

returned free of charge to the dealer, even when you don’t

purchase a new product. Further collection facilities are listed

on the home page of www.swico.ch

or www.sens.ch.

CAUTION:

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN

INCORRECT TYPE. DISPOSE OF USED BATTERIES

ACCORDING TO THE INSTRUCTIONS.

Notice to Users in EEA Countries

This product complies with the essential requirements and

provisions of RE Directive 2014/53/EU.

The CE Declaration of Conformity is available by accessing the

URL:

http://www.ricoh-imaging.co.jp/english/support/

declaration_of_conformity.html

and selecting the product applicable.

Operating frequency band: 2400 MHz - 2483.5 MHz

Maximum radio-frequency power: 14 dBm EIRP

European importer: RICOH IMAGING EUROPE S.A.S.

Parc Tertiaire SILIC 7-9, avenue Robert Schuman - B.P. 70102,

94513 Rungis Cedex, FRANCE

Manufacturer: RICOH IMAGING COMPANY, LTD.

1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN

The CE Mark is a Dir ective confo rmity mark of the

European Union.

• Do not use the camera in a place where electrical products,

AV/OA devices, and so on generate magnetic fields and

electromagnetic waves.

• If the camera is affected by magnetic fields and

electromagnetic waves, it may not be able to communicate.

• If the camera is used near a TV or a radio, poor reception or

TV screen glitch may occur.

• If there are multiple wireless LAN access points or Bluetooth

devices near the camera and the same channel is used,

search operation may not be executed correctly.

This camera conforms to the technical standards under the

Radio Law and Telecommunications Business Law and the

certification of conformance to technical standards can be

displayed on the monitor.

• Microsoft and Windows are registered trademarks of

Microsoft Corporation in the United States of America and

other countries.

• Mac and macOS are trademarks of Apple Inc., registered in

the U.S. and other countries.

• IOS is a trademark or registered trademark of Cisco in the

U.S. and other countries and is used under license.

• Intel and Intel Core are trademarks of Intel Corporation in the

U.S. and/or other countries.

• SDXC Logo is a trademark of SD-3C, LLC.

• The Bluetooth

word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc., and any use of

such marks by Ricoh Company, Ltd. is under license.

• USB Type-C is a trademark of USB Implementers Forum.

• HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing, LLC in the United States and/or other countries.

All other trademarks are the property of their respective owners.

• This product uses the RICOH RT font designed by Ricoh

Company Ltd.

About the Wireless LAN and Bluetooth

Functions

In the frequency band used by the camera, along with

industrial, scientific, and medical devices such as

microwave ovens, premises radio stations (wireless

stations requiring license) and specified low power radio

stations (wireless stations not requiring license) for mobile

object identification used in factory production lines, etc.,

and amateur radio stations (wireless stations requiring

license) are operated.

1. Before using the camera, confirm that premises radio

stations and specified low power radio stations for

mobile object identification and amateur radio stations

are not operated in the vicinity.

2. In the event that the camera causes harmful radio wave

interference to premises radio stations for mobile object

identification, immediately change the frequency being

used to avoid interference.

3. If you have other troubles such that the camera causes

harmful radio wave interference to specified low power

radio stations for mobile object identification or to

amateur radio stations, contact your nearest service

center.

Displaying the Certification Marks

1. Press F to display the menu screen.

2. Use ABCD to display the D6 menu (Maintenance).

3. Use ABCD to select [Certification Marks], and press

Trademarks

For Customers in Thai

This telecommunication equipment conforms to the

requirements of the Office of the National Broadcasting and

Telecommunications Commission.

e_kb582_wg_cover.fm Page 2 Thursday, December 10, 2020 2:05 PM

RICOH IMAGING COMPANY, LTD.

1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN

(http://www.ricoh-imaging.co.jp)

RICOH IMAGING EUROPE

S.A.S.

Parc Tertiaire SILIC 7-9, avenue Robert Schuman - B.P. 70102,

94513 Rungis Cedex, FRANCE

(http://www.ricoh-imaging.eu)

RICOH IMAGING AMERICAS

CORPORATION

2 Gatehall Drive Suite 204, Parsippany, New Jersey 07054, U.S.A.

(http://www.us.ricoh-imaging.com)

RICOH IMAGING CANADA

INC.

5560 Explorer Drive Suite 100, Mississauga, Ontario, L4W 5M3, CANADA

(http://www.ricoh-imaging.ca)

RICOH IMAGING CHINA CO.,

LTD.

Room A 23F Lansheng Building, 2-8 Huaihaizhong Road, Huangpu District,

Shanghai, 200021, CHINA

(http://www.ricoh-imaging.com.cn)

http://www.ricoh-imaging.co.jp/english

This contact information may change without notice.

Please check the latest information on our websites.

SLR Digital Camera

Wireless Communication Guide

To ensure the best performance from your

camera, please read the Wireless

Communication Guide before using the

camera.

Model No. R03010

• Specifications and external dimensions are subject to

change without notice.

R01DTL20 Printed in Philippines

*4RE2Z030*

e_kb582_wg_cover.fm Page 1 Thursday, December 10, 2020 2:05 PM

Pentax K-3 Mark III Le manuel du propriétaire

Marque: Pentax

Modèle: K-3 Mark III

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Pentax K-3 Mark III Owner's manual

Pentax K-3 Mark III Le manuel du propriétaire

Pentax K-3 Mark III Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents