Lenco CR-650BK Manuel utilisateur

Marque: Lenco

Modèle: CR-650BK

Catégorie: Radios

Taper: Manuel utilisateur

Model: CR-650BK

User manual – DAB+/FM clock radio with Bluetooth and wireless charging

Gebruikershandleiding - DAB+/FM-wekkerradio met bluetooth en draadloos opladen

Bedienungsanleitung – DAB+-/UKW-Radiowecker mit Bluetooth und kabelloser Aufladung

Mode d’emploi – radio-réveil DAB+/FM avec Bluetooth et recharge sans fil

Manual de usuario. Radio reloj DAB+/FM con Bluetooth y carga inalámbrica

Index:

ENGLISH ......................................................................................................................................... 3

NEDERLANDS................................................................................................................................ 21

DEUTSCH ...................................................................................................................................... 39

FRANÇAIS ..................................................................................................................................... 59

ESPAÑOL ....................................................................................................................................... 77

Version: 1.0

ENGLISH

CAUTION:

Usage of controls or adjustments or performance of procedures other than those specified herein

may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not cover or block any ventilation openings. When placing the device on a shelf,

leave 5 cm (2”) free space around the whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and

other heat-generating products or naked flame. The device can only be used in moderate

climates. Extremely cold or warm environments should be avoided. Working

temperature between 0° and 35°C.

4. Avoid using the device near strong magnetic fields.

5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and

restart the device following the instruction manual. During file transmission, please

handle with care and operate in a static-free environment.

6. Warning! Never insert an object into the product through the vents or openings.

High voltage flows through the product and inserting an object can cause electric shock

and/or short circuit internal parts. For the same reason, do not spill water or liquid on

the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming

pools.

8. The device shall not be exposed to dripping or splashing and make sure that no objects

filled with liquids, such as vases, are placed on or near the apparatus.

9. Do not use this device when condensation may occur. When the unit is used in a warm

wet room with damp, water droplets or condensation may occur inside the unit and the

unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before

turning on the power: the unit should be dry before getting any power.

10. Although this device is manufactured with the utmost care and checked several times

before leaving the factory, it is still possible that problems may occur, as with all electrical

appliances. If you notice smoke, an excessive build-up of heat or any other unexpected

phenomena, you should disconnect the plug from the main power socket immediately.

11. This device must operate on a power source as specified on the specification label. If you

are not sure of the type of power supply used in your home, consult your dealer or local

power company.

12. Keep away from animals. Some animals enjoy biting on power cords.

13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To

remove severe stains, you may use a damp cloth with dilute detergent.

14. The supplier is not responsible for damage or lost data caused by malfunction, misuse,

modification of the device or battery replacement.

15. Do not interrupt the connection when the device is formatting or transferring files.

Otherwise, data may be corrupted or lost.

16. If the unit has USB playback function, the USB memory stick should be plugged into the

unit directly. Don’t use an USB extension cable because it can cause interference

resulting in failing of data.

17. The rating label has been marked on the bottom or back panel of the device.

18. This device is not intended for use by people (including children) with physical, sensory

or mental disabilities, or a lack of experience and knowledge, unless they’re under

supervision or have received instructions about the correct use of the device by the

person who is responsible for their safety.

19. This product is intended for non professional use only and not for commercial or

industrial use.

20. Make sure the unit is adjusted to a stable position. Damage caused by using this product

in an unstable position vibrations or shocks or by failure to follow any other warning or

precaution contained within this user manual will not be covered by warranty.

21. Never remove the casing of this device.

22. Never place this device on other electrical equipment.

23. Do not allow children access to plastic bags.

24. Only use attachments/accessories specified by the manufacturer.

25. Refer all servicing to qualified service personnel. Servicing is required when the device

has been damaged in any way, such as the power supply cord or the plug, when liquid

has been spilled or objects have fallen into the device, when the device has been

exposed to rain or moisture, does not operate normally, or has been dropped.

26. Long exposure to loud sounds from personal music players may lead to temporary or

permanent hearing loss.

27. If the product is delivered with power cable or AC power adaptor:

⚫ If any trouble occur, disconnect the AC power cord and refer servicing to

qualified personnel.

⚫ Don’t step on or pinch the power adaptor. Be very careful, particularly near the

plugs and the cable’s exit point. Do not place heavy items on the power adaptor,

which may damage it. Keep the entire device out of children’s reach! When

playing with the power cable, they can seriously injure themselves.

⚫ Unplug this device during lightning storms or when unused for a long period.

⚫ The socket outlet must be installed near the equipment and must be easily

accessible.

⚫ Do not overload ac outlets or extension cords. Overloading can cause fire or

electric shock.

⚫ Devices with class 1 construction should be connected to a main socket outlet

with a protective earthed connection.

⚫ Devices with class 2 construction do not require a earthed connection.

⚫ Always hold the plug when pulling it out of the main supply socket. Do not pull

the power cord. This can cause a short circuit.

⚫ Do not use a damaged power cord or plug or a loose outlet. Doing so may result

in fire or electric shock.

28. If the product contains or is delivered with a remote control containing coin/cell

batteries:

Warning:

⚫ “Do not ingest battery, Chemical Burn Hazard” or equivalent working.

⚫ [The remote control supplied with] This product contains a coin/button cell

battery. If the battery is swallowed, it can cause severe internal burns in just 2

hours and can lead to death.

⚫ Keep new and used batteries away from children.

⚫ If the battery compartment does not close securely, stop using the product and

keep it away from children.

⚫ If you think batteries might have been swallowed or placed inside any part of

the body, seek immediate medical attention.

29. Caution about the use of Batteries:

⚫ Danger of explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type.

⚫ Battery cannot be subjected to high or low extreme temperatures, low air

pressure at high altitude during use, storage or transportation.

⚫ Replacement of a battery with an incorrect type that can result in an explosion

or the leakage of flammable liquid or gas.

⚫ Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting

of a battery, that can result in an explosion.

⚫ Leaving a battery in an extremely high temperature surrounding environment

that can result in an explosion or that leakage of flammable liquid or gas.

⚫ A battery subjected to extremely low air pressure that may result in an

explosion or the leakage of flammable liquid or gas.

⚫ Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION

• Unpack all parts and remove protective material.

• Do not connect the unit to the mains before checking the mains voltage and before all

other connections have been made.

Power supply adaptor

Use only the power supply listed in the user instructions

Information

Value and precision

Manufacturers name or trade mark,

commercial registration and address

Manufacture: DongguanDongsong Electronic Co., Ltd.

Address: No.19, Xintian Street, BaizhoubianVillage,

East District, Dongguan, Guangdong, P.R. China

Value and precision

Model Identifier

DYS818-050200W-K

Input voltage

100-240V

Input AC frequency

50/60 Hz

Output voltage

5.0 V

Output current

2.0 A

Output power

10.0 W

Average active efficiency

80.98%

Efficiency at low load (10%)

No load Power consumption

0.06W

WARNING: When participating in the traffic listening to a personal

music player can make the listener less aware of potential dangers such

as approaching cars.

WARNING: To prevent possible hearing damage, do not listen at high

volume levels for long periods.

Controls and Indicator

Product Front

Product Back

Product Top

1: LCD Display

4: USB play jack

2: DAB/FM Antenna

5: AUX in jack

3: TF/MicroSD slot

6: DC in jack (DC 5V/2000mA)

7: Wireless Charge

8: Menu/info/Back button

9: Alarm 1 and Radio preset 1 button

11: Radio Preset 3 button

13: Radio Preset 5 button

15: previous button

17: Enter button

19: SNOOZE and Black Light setting

21: Radio preset/memory button

23: Power ON/OFF button and Play mode

10: Alarm 2 and Radio preset 2 button

12: Radio Preset 4 button

14: Sleep and NAP function button

16: Play/Pause/Mute/Radio scan button

18: Next button

20: Volume - button

22: Volume + button

Listening to DAB Radio

1: Plug the mains power and then press and hold the button to power on the unit. The unit

will automatically enter into the DAB mode.

2: Press the button to choose the DAB mode and perform auto scan function.

3: During the scan the display will show “Scanning ………” together with a slide bar that indicates

the progress of the scan and the number stations that have been found so far.

4: Once the scan has finished, the unit will select the first alphanumerically found station.

5: Press the / button to enter station list.

6: When you find a station that you would like to listen to, press the enter button to confirm.

NOTE: If no stations are found after auto scan, Press the enter button to enter into “Station Scan”,

press the to select “Full Scan” or “Manual Scan” modes for stations.

DAB Full Scan

The full scan will search for the entire DAB Band III channels. After the scan has finished, the first

alphanumerically found station will be automatically selected.

1: To activate full scan, Hold the button to enter into the station scan, then Press the

/ button to select “Full Scan”, and press the enter button to confirm. the display will show

“Scanning ………” together with a slide bar that indicates the progress of the scan and the

number stations that have been found so far.

2: All the stations that have been found will be stored automatically. Press the / button to

choose the station you prefer and Press the enter button to confirm.

DAB Manual Tune

As well as the full scan function, you can manually tune the

radio. This can help if you know your radio has missed

stations. You will need to know which multiples the missing

radio station is in.

1: Press and hold the button and enter into “Station

Scan”, Press the / button to select the Manual mode,

press the enter button to confirm.

2: Press the / button to cycle through the DAB

channels, which are number from 5A to13F.

3: After your desired channel number is selected, press the

enter button to enter the current multiplex, it will now

display the multiplex and below you will see the signal

strength.

4: You will not see any new radio stations or hearing anything while in manual tune. To find the

newly tuned in stations search through the station list.

Preset/Memory Setting

Store the current radio station as a preset

1: Hold the to enter the station memory function

2: Press the / button to select the preset number of your choice and press the enter button

to store the station.

You can also do a quick save the current station to one of the 5 top preset buttons by

longpressing one of the preset buttons.

Listening to FM Radio

1: Press and hold the button to power on the unit. The unit will automatically enter into the

DAB mode.

2: Press the button to choose the FM mode. Press the / button to select the desired

station.

3: Hold the / button to auto scan to the next available radio station

4: Press and hold the button to enter auto scan mode which stores the channels found as

preset. During the scan the display will show “Scanning…”

5: Once the scan has finished, the unit will select the first alphanumerically found station.

6: To explore the stations found, press the 1.2.3.4.5 to choose the first 5 memory stations and

press the button and Press the / button to enter station list.

7: When you find a station that you would like to listen to, press the enter button to confirm.

8: Press the / to adjust the volume

9: Press the to mute the FM station, the volume mark will flash.

Preset/Memory Setting

Store the current radio station as a preset

- Hold the to enter the station memory function

- Press the / button to select the preset number of your choice and press the

enter button to store the station.

You can also do a quick save the current station to one of the 5 top preset buttons by long

pressing one of the preset buttons.

Listening to Bluetooth Music

If you are using a Bluetooth audio device, make sure the working distance is within 30 ft, different

environment may have effect on the working distance.

1: Plug the power adaptor, hold the to power on the unit, press the to choose the

Bluetooth mode, The "Bluetooth mode" will flash on the display.

2: Turn on the Bluetooth on your audio device.

3: Searching Devices choose “Lenco CR-650”, no password is required. If your device does require

a password, type “0000”, (After paired, the "Bluetooth mode" will stay on.)

4: Press the to adjust the volume

5: Press the to play/pause, hold for disconnect the Bluetooth device

6: Press the / button to choose the previous song/next song

Note: “This product has a bluetooth reception function, you can’t transmit any bluetooth sound

with it: this means that you can only receive wirelessly a bluetooth sound signal from an external

source like a smartphone.”

Listening to USB music

1: Plug a (FAT-32 formatted) USB memory stick at the back of the unit.

2: Hold the to power on the unit, press the to choose the USB mode

3: Press the to adjust the volume

4: Press the to play/pause

5: Press the / button to choose the previous song/next song

Note: Please turn up the volume of your connected Bluetooth device and CR-650

Listening to Micro SD Card music

1: Plug the Micro SD Card (FAT-32 formatted) into the TF/microSD slot at the back

2: Hold the to power on the unit, press the to choose the Micro SD card mode

3: Press the to adjust the volume

4: Press the to play/pause

5: Press the / button to choose the previous song/next song

Listening to Aux in

1: Plug the AUX cable at the back of the unit (audio cable not included)

2: Hold the to power on the unit, press the to choose the AUX mode

3: Press the to adjust the volume

4: Press the to mute the sound.

Listening to Natural sound (Sleep therapy mode)

1: Hold the to power on the unit, press the to choose the Sleep Therapy mode

2: When you choose sleep therapy mode, sleep function will start automatically, the default

timing is 15 minutes, press the sleep button to choose the different time.

3: Press the / button to choose 10 different nature sound

4: Press the to adjust the volume

5: Press the to mute the sound.

Time Setting

1: Hold the to power on the unit.

2: Hold the button and enter the menu. Press the / button to find System, press

enter button to enter system and you will find the “Time setup” option

3: Press the enter button and then press the / button to set the time according to the

guide.

Setting Alarm

The alarms can be set in standby mode.

1: Press alarm 1 or alarm 2 and press Enter

2: Press the / button to choose the option you would like to change and press Enter

Editable options:

Alarm on/off (turn the alarm on/off

Time: Alarm time

Days: which days the alarm should work

Duration of the alarm

Mode: Which alarm tone (FM/DAB/buzzer/Sleep therapy sounds)

Volume: Max volume of the alarm tone (minimum is 1)

Preset: choose which preset should be used for the alarm

Save: Save the changes you made

Note: if you don’t change any settings within 10 seconds, the clock will return to normal time

mode and your settings won’t be saved.

If you choose ‘weekdays’ in the ‘days’ menu, a ‘5’ is shown on the right off the alarm symbol,

meaning the 5 working days of the week.

If you choose ‘weekends’ in the ‘days’ menu, a ‘2’ is shown on the right off the alarm symbol,

meaning the 2 days of the weekend.

If you choose ‘Daily’ in the ‘days’ menu, a ‘2’ and a ‘5’ is shown on the right off the alarm symbol,

meaning 7 days of the week.

SLEEP Setting

1: When powered on, press the button to activate the SLEEP function

2: Press the button to choose the SLEEP time 15/30/45/60/75/90 and press enter

Or wait a few seconds to use the selected sleep time.

The unit will power off, when the selected sleep time is over

Note:

1. If you want to check the remaining sleep time, short press the Sleep button once when the

sleep timer is active

2. If you want to reset the Sleep timer, press the Sleep button twice when the sleep timer is

active

NAP Setting

1: When the device is powered off, press the button to active the NAP function

2: Press the button to choose the nap time 15/30/45/60/75/90 and press enter or wait a

few seconds to use the selected nap time.

3: The unit will power off when the chosen nap time is over.

Note:

1. If you want to check the remaining nap time, short press the nap button once when the nap

time is active

2. If you want to reset the nap timer, press the nap button twice when the nap timer is active.

Preset/Memory Setting

1: In FM/DAB mode, hold the to enter the station memory function

2: Press the / button to choose the station number and press the enter button to store the

station.

3: In FM/DAB mode, press the to enter the memory station list

4: Press the / button to choose the station you like.

Backlight Setting

1: Set the backlight in the menu or press the SNOOZE/DIMMER button setting the

backlight level of the display

BACK UP Batteries

Inserting/replacing batteries:

1. Remove the battery compartment cover located at the bottom of the device.

2. Insert 4 new AA/LR6 batteries (not included) into the battery compartment and ensure that the

polarity of each battery corresponds to the symbols (+ and -) in the battery compartment.

3. Close the battery compartment again.

Please note:

- Inserting batteries into the device is optional. The batteries are only for memorizing time and

the date settings when the event of a power failure.

- Without the batteries, the date and time will be reset to the factory default values in the case

of a power failure.

- The other settings including the alarm settings and the Radio preset stations will always be

memorized in the event of a power failure.

Trouble shooting guide

Symptom

Possible cause

Solution

Your clock radio does not

turn on.

You have not plugged in your

device

Plug the device’s AC adapter into an electrical

outlet.

The electrical outlet is not

supplied with electricity.

Plug another device into the same electrical

outlet to perform a cross test

No sound

The volume is set to the

minimum

Adjust the volume by pressing the volume

button.

Bad FM reception

The antenna is not fully

extended.

Fully extend the antenna.

There is interference from

nearby electrical devices

(microwave oven, TV, etc.)

Move your clock radio further away from

possible sources of interference.

Bad DAB reception

The antenna is not fully

extended

Fully extend the antenna.

Your area is not covered by DAB.

Check the DAB coverage in your area.

No playback from a USB

drive or microSD card

The audio format is not

supported by your clock radio

Ensure that your audio has been correctly

saved in the removable medium in MP3 format.

Ensure that the USB drive or microSD card is

correctly connected to or inserted into the USB

port or the microSD card slot on the back of

your clock radio.

A Bluetooth* connection

with another device

cannot be established.

Your Bluetooth* playback device

is not in pairing mode.

Consult the user manual for your Bluetooth*

playback device and try again.

Make sure your clock radio and your

Bluetooth* playback device are less than 8

metres apart and no walls or other electronic

devices are blocking or interfering with the

Bluetooth* transmission.

No sound when playing

from Bluetooth

connected device

Turn up the volume from the clock and the

Bluetooth device.

The phone placed on the

wireless charging pad is

not charging.

- Ensure your clock radio is powered by the AC

adapter.

- Make sure your phone is Qi* enabled

(equipped with the Qi* wireless charging

technology).

- Remove the case/protective cover from your

phone.

- Restart your phone.

- Ensure you have enabled wireless charging in

your phone settings, if this option is there.

- Update your phone’s system software.

- Contact your phone's manufacturer for

advice.

Technical Specifications

Input power (power adapter)

AC 100-240V ~ 50/60Hz

Music output power

2 x 5 W RMS + passive

DAB Frequency range

174.928 - 239.200 MHz

FM Frequency range

87.5 - 108 MHz

Bluetooth Frequency range:

Bluetooth Version:

2402 - 2480MHz

V5.0

Power consumption

Max 13W

Power consumption (standby)

< 1W

Operating Temperature

0°C-35°C

Operating position

Horizontal

Dimensions of the unit

170x 170 x 74mm

Weight

0,9KG (without batteries)

This product is suited for this purpose within all EU Countries.

Guarantee

Lenco offers service and warranty in accordance to European law, which means that in case of

repairs (both during and after the warranty period) you should contact your local dealer.

Important note: It is not possible to send products that need repairs to Lenco directly.

Important note: If this unit is opened or accessed by a non-official service center in any way, the

warranty expires.

This device is not suitable for professional use. In case of professional use, all warranty obligations

of the manufacturer will be voided.

Disclaimer

Updates to Firmware and/or hardware components are made regularly. Therefore some of the

instruction, specifications and pictures in this documentation may differ slightly from your

particular situation. All items described in this guide for illustration purposes only and may not

apply to particular situation. No legal right or entitlements may be obtained from the description

made in this manual.

Disposal of the Old Device

This symbol indicates that the relevant electrical product or battery

should not be disposed of as general household waste in Europe. To

ensure the correct waste treatment of the product and battery,

please dispose them in accordance to any applicable local laws of

requirement for disposal of electrical equipment or batteries. In so

doing, you will help to conserve natural resources and improve

standards of environmental protection in treatment and disposal of

electrical waste (Waste Electrical and Electronic Equipment

Directive).

CE Marking

Hereby, Commaxx B.V. Wiebachstraat 37, 6466NG Kerkrade, The Netherlands, declares that this

product is in compliance with the essential EU directive requirements.

The declaration of conformity may be consulted via [email protected]

Service

For more information and helpdesk support, please visit www.lenco.com

Commaxx B.V. Wiebachstraat 37, 6466NG Kerkrade, The Netherlands

La page charge ...

Lenco CR-650BK Manuel utilisateur

Marque: Lenco

Modèle: CR-650BK

Catégorie: Radios

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Lenco CR-650BK User manual
español: Lenco CR-650BK Manual de usuario
Deutsch: Lenco CR-650BK Benutzerhandbuch
Nederlands: Lenco CR-650BK Handleiding

Lenco CR-650BK Manuel utilisateur

Lenco CR-650BK Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents