Wacker Neuson WL38 Manuel utilisateur

Operator’s Manual

Wheel loader

WL38

Machine model RL40

Document number

5100016711

Date 01/2016

Version 1.2

Language [en]

1000323108

This Operator's Manual includes

the AEM Safety -anual :/7

Document ation

Documents Language Order no.

Operator’s Manual

[us] 1000323108

[kn] 1000323109

[mx] 1000315927

Copyright – Wacker Neuson SE

Printed in Germany

worldwide.

No part of this publication may be reproduced, translated or used in any form or by any means – graphic,

electronic or mechanical including photocopying, recording, taping or information storage or retrieval systems –

without prior permission in writing from the manufacturer.

No reproduction or translation of this publication, in whole or part, without the written consent of Wacker Neuson

SE.

Violations of legal regulations, in particular of the copyright protection, shall be subject to civil and criminal

prosecution.

Wacker Neuson SE keep abreast of the latest technical developments and constantly improve their products. For

this reason, we may from time to time need to make changes to figures and descriptions in this documentation

which do not reflect products that have already been delivered and that will not be implemented on these

machines.

Technical data, dimensions and weights are only given as an indication. Responsibility for errors or omissions

not accepted.

The cover features the machine with possible optional equipment.

Legend

Original Operator’s Manual

Version 1.2

Date 01/2016

Document BA WL38 *

BA WL38 * 01/2016 * BA_RL40_eIVZ.fm * [en] I-1

Table of contents I

1Foreword

1.1 Operator’s manual................................................................................................................................. 1-1

1.2 Warranty and liability............................................................................................................................. 1-5

2 Safety

2.1 Safety symbols and signal words .......................................................................................................... 2-1

2.2 Qualification of operating personnel...................................................................................................... 2-2

2.3 Conduct................................................................................................................................................. 2-3

2.4 Operation............................................................................................................................................... 2-4

2.5 Lifting gear applications......................................................................................................................... 2-8

2.6 Trailer operation .................................................................................................................................. 2-10

2.7 Operation of attachments.................................................................................................................... 2-11

2.8 Towing, loading and transporting ........................................................................................................ 2-12

2.9 Maintenance........................................................................................................................................ 2-14

2.10 Measures for avoiding risks................................................................................................................. 2-18

3 Introduction

3.1 Machine overview.................................................................................................................................. 3-1

3.2 Brief description of the machine............................................................................................................ 3-2

3.3 Information and regulations on use ....................................................................................................... 3-5

3.4 Labels.................................................................................................................................................... 3-8

4 Putting into operation

4.1 Cabin/control stand ............................................................................................................................... 4-1

4.2 Overview of control elements.............................................................................................................. 4-11

4.3 Indicator lights and warning lights (overview)...................................................................................... 4-21

4.4 Preparations........................................................................................................................................ 4-38

4.5 Starting and stopping the engine......................................................................................................... 4-44

5Operation

5.1 Steering system..................................................................................................................................... 5-1

5.2 Accelerator actuation............................................................................................................................. 5-1

5.3 Brakes ................................................................................................................................................... 5-2

5.4 Travel operation .................................................................................................................................... 5-3

5.5 Differential lock.................................................................................................................................... 5-10

5.6 Lights/signaling system ....................................................................................................................... 5-11

5.7 Wiper/wash system ............................................................................................................................. 5-15

5.8 Heating and ventilation........................................................................................................................ 5-16

5.9 Operating hydraulics ........................................................................................................................... 5-18

5.10 Attachments ........................................................................................................................................ 5-26

5.11 Work operation.................................................................................................................................... 5-31

5.12 Emergency lowering............................................................................................................................ 5-43

5.13 Options................................................................................................................................................ 5-45

5.14 Putting out of operation/back into operation........................................................................................ 5-65

5.15 Permanently putting out of operation .................................................................................................. 5-67

6Transportation

6.1 Towing the machine .............................................................................................................................. 6-1

6.2 Loading the machine ............................................................................................................................. 6-4

6.3 Transporting the machine...................................................................................................................... 6-9

Table of contents

I-2 BA WL38 * 01/2016 * BA_RL40_eIVZ.fm * [en]

I Table of contents

7 Maintenance

7.1 Information on maintenance.................................................................................................................. 7-1

7.2 Maintenance overview........................................................................................................................... 7-5

7.3 Fluids and lubricants ........................................................................................................................... 7-14

7.4 Maintenance accesses........................................................................................................................ 7-16

7.5 Cleaning and maintenance.................................................................................................................. 7-18

7.6 Lubrication work .................................................................................................................................. 7-20

7.7 Fuel system ......................................................................................................................................... 7-21

7.8 Engine lubrication system ................................................................................................................... 7-25

7.9 Cooling system.................................................................................................................................... 7-27

7.10 Air filter ................................................................................................................................................ 7-31

7.11 V-belt/toothed belt ............................................................................................................................... 7-34

7.12 Hydraulic system ................................................................................................................................. 7-36

7.13 Electrical system ................................................................................................................................. 7-40

7.14 Heating, ventilation and air conditioning system (option) .................................................................... 7-45

7.15 Washer system.................................................................................................................................... 7-46

7.16 Axles/traveling drive ............................................................................................................................ 7-47

7.17 Braking system.................................................................................................................................... 7-48

7.18 Tires .................................................................................................................................................... 7-49

7.19 Maintenance and servicing work on attachments ............................................................................... 7-52

7.20 Maintenance of options ....................................................................................................................... 7-53

7.21 Exhaust gas treatment ........................................................................................................................ 7-54

8Malfunctions

8.1 Malfunctions, causes, remedies ............................................................................................................ 8-1

9 Technical data

9.1 Models and trade names....................................................................................................................... 9-1

9.2 Engine ................................................................................................................................................... 9-1

9.3 Drive/axles............................................................................................................................................. 9-3

9.4 Brakes ................................................................................................................................................... 9-4

9.5 Tires ...................................................................................................................................................... 9-4

9.6 Steering system..................................................................................................................................... 9-5

9.7 Operating hydraulics ............................................................................................................................. 9-5

9.8 Electrical system ................................................................................................................................... 9-7

9.9 Tightening torques............................................................................................................................... 9-10

9.10 Coolant ................................................................................................................................................ 9-11

9.11 Noise emissions .................................................................................................................................. 9-11

9.12 Vibration .............................................................................................................................................. 9-12

9.13 Weights ............................................................................................................................................... 9-13

9.14 Payload/load-carrying capacity/lift capacity......................................................................................... 9-13

9.15 Dimensions.......................................................................................................................................... 9-14

BA WL38 * 01/2016 * BA_RL40_Vorwort_us.fm * [en] 1-1

Foreword 1

1 Foreword

1.1 Operator’s manual

Information on this Operator’s Manual

This Operator’s Manual describes how to operate and perform

maintenance on the machine. It provides operating and maintenance

personnel with the necessary knowledge of the machine’s functional

characteristics to ensure safe handling, correct maintenance, inspection

and cleaning, and to ensure that the technical safety regulations for the

machine are complied with.

Your own safety, as well as the safety of others, depends to a great extent

on how the machine is moved and operated. Therefore, carefully read and

understand this Operator’s Manual prior to the first drive. By reading the

Operator’s Manual, the operator familiarizes himself more quickly with the

machine, and uses it more safely and efficiently.

If required, the user/owner of the machine must supplement the

Operator’s Manual with instructions and regulations regarding

environmental protection and national accident prevention regulations.

Operational safety and readiness of the machine do not only depend on

the operator’s skill, but also on maintenance and servicing of the machine.

This is why regular maintenance and servicing is absolutely necessary.

Please refer to chapter Information on cleaning and maintenance on

page 7-18 for an overview of the maintenance and service work. An

inspection booklet is also supplied with the machine.

Information

The maintenance and repair work that is not specified in this Operator’s

Manual may only be performed by an authorized service center.

The Operator’s Manual must be read and applied by all persons involved

in work with or on the machine, for example with regard to:

• Operatiion, including setting up, rectifying malfunctions during

operation, maintenance, disposal of auxiliary and operating material,

and disposal of the entire machine.

• Repairs (inspection, maintenance).

• Transportation.

Your dealer and the Wacker Neuson service team will be happy to answer

any questions you may have on this Operator’s Manual.

All technical indications in this Operator’s Manual refer to series models

tested under standard operating conditions for Central Europe and

describe the standard functions of these series models. The equipment

and its functional modes and accessories depend on the relevant model

and the product options, as well as on the national requirements.

Illustrations may show optional/additional equipment that is not mentioned

in the text or not supplied as standard.

Foreword

Table of contents

Index

1-2 BA WL38 * 01/2016 * BA_RL40_Vorwort_us.fm * [en]

1 Foreword

The descriptions, illustrations, weight indications and technical data are

not binding and correspond to the state of the art at the time of printing.

We must reserve the right to make changes without prior notice with

regard to design, equipment, appearance and technology on account of

the ongoing further development of the products.

At the place of use, always observe all safety and warning instructions,

information labels, and the legal and safety regulations.

Please get in touch with the Wacker Neuson service department if you

require any special functions that are only available using additional

components and/or under special conditions.

We will be happy to answer questions and provide information on the

conditions under which the product and the circumstances allow any

special functions.

We recommend performing test work in safe conditions if the load

capacity or mode of action of our products give rise to concern under

specific circumstances.

Information

The word “loader unit” is used in this Operator’s Manual for the loader unit

with an attachment installed on it.

“Left” and “right” are always used as seen in the forward travel direction.

BA WL38 * 01/2016 * BA_RL40_Vorwort_us.fm * [en] 1-3

Foreword 1

Explanation of symbols

This symbol identifies warning instructions and is used for alerting against

potential personal hazards. Special attention must be paid to the warning

instruction texts following this symbol.

Abbreviations

Symbol Explanation

• Identification of general activities

- Identification of subdivision and order of activity

➥ Identification of the results of an enumeration

➥

Identification of the results of an activity

Identification of descriptions referring to figures

(pos.)

Identification of control and display elements

(pos.). The numbering applies to the entire Opera-

tor’s Manual

1

Abbreviation Explanation

e.g. for example

max. maximum

min. minimum

approx. approximately

Fig. Figure

Pos. Position number in figures

(option) Optional/additional equipment on machine

incl. including, inclusive

1-4 BA WL38 * 01/2016 * BA_RL40_Vorwort_us.fm * [en]

1 Foreword

Conversion tables

Values in brackets are values converted according to the tables below.

The units of measurement are American units. The values are rounded up

or down on the basis of good commercial practice.

Volume unit

1 cm³ 0.061 in³

1 m³ 35.31 ft³

1 ml 0.034 US fl.oz.

1 l 0.26 gal

1 l/min 0.26 gal/min

Unit of length

1 mm 0.039 in

1 m 3.28 ft

Weight

1 kg 2.2 lbs.

1 g 0.035 oz.

Pressure

1 bar 14.5 psi

1 kg/cm³ 14.22 lbs/in³

Force/output

1 kN 224.81 lbf.

1 kW 1.34 hp

1 PS 0.986 hp

Torque

1 Nm 0.74 ft.lbs.

Speed

1 kph 0.62 mph

Acceleration

1 m/s² 3.28 ft/s²

BA WL38 * 01/2016 * BA_RL40_Vorwort_us.fm * [en] 1-5

Foreword 1

1.2 Warranty and liability

Information on warranty and liability

The CE mark shows that the machine has been manufactured in

accordance with the applicable EC Directives.

Information

The manufacturer/supplier shall be not liable for damage resulting from

use other than designated. Alone the user/owner shall bear the risk. The

Operator’s Manual must always be on the machine or at the place of use.

Store the Operator’s Manual in the place provided for it on the machine

(Fig. 1).

Exemption from warranty and liability

Despite taking great care, we cannot rule out the possibility of deviations

from drawings or dimensions, calculation errors, printing errors or

incompleteness in this Operator’s Manual. Therefore, we shall accept no

liability for the correctness and completeness of the information we have

provided in this Operator’s Manual. The options described in this

Operator’s Manual are not available in all countries. We warrant our

products to be in perfect running condition within the framework of our

General Terms and Conditions of Business. We basically do not offer any

further guarantees. Any further liability beyond the scope of our General

Terms and Conditions of Business is excluded.

Observe the following:

• Do not perform any modifications on the machine.

• Use only attachments approved by the manufacturer for the machine.

• The machine must only be put into operation, operated and serviced

as described in the Operator’s Manual.

• Use only the machine if all safety and protection devices are intact.

• Observe the monitoring systems during operation

• Repairs may only be performed by authorized service centers.

• Follow the instructions given in the Operator’s Manual carefully.

Fig. 1

1-6 BA WL38 * 01/2016 * BA_RL40_Vorwort_us.fm * [en]

1 Foreword

Notes:

BA WL38 * 01/2016 * BA_RL40_wSicherheit_us.fm * [en] 2-1

Safety 2

2 Safety

2.1 Safety symbols and signal words

Explanation

The following symbol identifies safety instructions. It is used for warning

against potential personal risk or danger.

DANGER

DANGER identifies a situation causing death or serious injury if it is

not avoided.

Consequences in case of non-observance.

► Avoidance of injury or death.

WARNING

WARNING identifies a situation that can cause death or serious

injury if it is not avoided.

Consequences in case of non-observance.

► Avoidance of injury or death.

CAUTION

CAUTION identifies a situation that can cause injury if it is not

avoided.

Consequences in case of non-observance.

► Avoidance of injury.

NOTICE

NOTICE identifies a situation that causes damage to the machine if it is

not observed.

► Avoidance of damage to property.

Safety

2-2 BA WL38 * 01/2016 * BA_RL40_wSicherheit_us.fm * [en]

2 Safety

2.2 Qualification of operating personnel

Owner’s duties

• Only allow specifically authorized, trained and experienced persons to

operate, drive and perform maintenance on the machine.

• Do not allow persons to be trained or instructed by anyone other than

an authorized and experienced person.

• Have persons to be trained or instructed practice under supervision

until they are familiar with the machine and its behavior (with the

steering and braking behavior, for example).

• Children and persons under the influence of alcohol, drugs or medicine

are not allowed to access the machine or operate it.

• Clearly and unequivocally define the responsibilities of the operating

and maintenance personnel.

• Clearly and unequivocally define the responsibilities on the job site,

also in view of traffic regulations.

• Give the operator the authority to refuse instructions by other persons

that are contrary to safety.

• Have the machine serviced and repaired only by an authorized service

center.

Required knowledge of operator

• The operator is responsible for other persons.

• Avoid any operational mode that might be prejudicial to safety.

• The specific national driving license is required.

• The machine may only be operated by authorized and safety-

conscious persons who are fully aware of the risks involved in

operating the machine.

• The operator and owner are obligated to operate the machine only in a

safe and working condition.

• All persons working on or with the machine must have read and under-

stood the safety instructions in this Operator’s Manual before starting

work.

• Follow, and instruct the operator in, legal and other mandatory regula-

tions relevant to accident prevention.

• Observe and instruct the operator in regulations regarding road traffic

and environmental protection.

• Use only the defined accesses for getting on and off the machine.

• Be familiar with the emergency exit of the machine.

Preparatory measures for the operator

• Before starting, check the machine whether it can be driven and

operated safely.

• Tie back long hair and remove all jewelry.

• Wear close-fitting work clothes that do not hinder movement.

BA WL38 * 01/2016 * BA_RL40_wSicherheit_us.fm * [en] 2-3

Safety 2

2.3 Conduct

Prerequisites for operation

• The machine has been designed and built in accordance with state-of-

the-art standards and the recognized safety regulations.

Nevertheless its use can cause danger to the operator or other

persons, or damage to the machine.

• Store this Operator’s Manual in the place provided for this in or on the

machine. Immediately replace a damaged or illegible Operator’s

Manual and any supplements to it.

• The machine must only be operated in accordance with its designated

use and the instructions set forth in this Operator’s Manual.

• The operator and owner are obligated not to put into operation or

operate a damaged or malfunctioning machine.

- If a damage or malfunction occurs during operation, put the machine

out of operation immediately and secure it against restart.

- Have all malfunctions jeopardizing the safety of the operator or other

persons immediately repaired by an authorized service center.

• Do not put the machine into operation or operate it after an accident;

have it inspected for damage by an authorized service center.

- Have the seat belt replaced by an authorized service center after an

accident, even if there is no visible damage.

- Cabin and protective structures

• Remove all dirt, snow and ice from climbing aids (handholds,

footholds, handrails, for example).

• The owner is responsible for requiring the operating and maintenance

personnel to wear protective clothing and equipment as required by the

circumstances.

2-4 BA WL38 * 01/2016 * BA_RL40_wSicherheit_us.fm * [en]

2 Safety

2.4 Operation

Preparatory measures

• Operation is only allowed with correctly installed and intact protective

structures.

• Keep the machine clean. This reduces injury, accident and fire

hazards.

• Safely store objects you carry with you at the places provided for this

(storage compartment, drinks holder, for example).

• Do not carry objects with you that protrude into the operator’s work

space. They can create another danger in case of an accident.

• Observe all safety, warning and information labels.

• Start and operate the machine only with the seat belt fastened and only

from the place provided for this.

• Check the condition and the fastening of the seat belt. Have malfunc-

tioning seat belts and mounting hardware replaced by an authorized

service center.

• Before starting work, adjust the seating position so that all control

elements can be reached and fully operated.

• Perform the personal adjustment at machine standstill only (operator

seat, steering column, for example).

• Ensure that all safety devices are properly installed and functional

before starting work.

• Before starting work or after interrupting work, ensure that the brake,

steering, signaling and light systems are functional.

• Before putting the machine into operation, ensure that nobody is in the

danger zone.

BA WL38 * 01/2016 * BA_RL40_wSicherheit_us.fm * [en] 2-5

Safety 2

Job site

• The operator is responsible for other persons.

• Before starting work, familiarize yourself with the job site. This applies

to, for example:

- Obstacles in the working and traveling area

- Any barriers separating the job site from public roads

- Soil weight-bearing capacity

- Existing overhead and underground lines

- Special operating conditions (dust, steam, smoke, asbestos, for

example)

• The operator must know the maximum dimensions of the machine and

the attachment – see “Technical data”.

• Maintain a safe distance (buildings, edges of building pits, for

example).

• When working in buildings or in enclosed areas, look out for:

- Height of the ceiling/clearances

- Width of entries/passages

- Maximum load of ceilings and floors

- Sufficient room ventilation (risk of carbon monoxide poisoning, for

example)

• Use existing visual aids to stay aware of the danger zone.

• In conditions of darkness and poor visibility, switch on existing work

lights and ensure that motorists are not blinded by these lights.

• If the existing lights of the machine are not sufficient for performing

work safely, ensure additional lighting of the job site.

• Due to hot machine parts, maintain a safe distance from easily

flammable material (hay, dry leaves, for example).

Danger zone

• The danger zone is the area in which persons are in danger due to the

movements of the machine, attachment and/or load.

• The danger zone also includes the area that can be affected by falling

material, equipment or by parts that are thrown out.

• Extend the danger zone sufficiently in the immediate vicinity of

buildings, scaffolds or other elements of construction.

• Seal off the danger zone should it not be possible to keep a sufficient

safety distance.

• Stop machine operation immediately if persons do not stay clear of the

danger zone.

Carrying passengers

• Carrying passengers with the machine is PROHIBITED.

• Carrying passengers on/in attachments/tools is PROHIBITED.

• Carrying passengers on/in trailers is PROHIBITED.

2-6 BA WL38 * 01/2016 * BA_RL40_wSicherheit_us.fm * [en]

2 Safety

Mechanical integrity

• The operator and owner are obligated to operate the machine only in a

safe and working condition.

• Operate the machine only if all protective and safety-oriented

equipment (protective structures such as a cabin or rollbar, removable

safety devices, for example) is installed and functional.

• Check the machine for visible damage and defects.

• In case of damage and/or unusual behavior, put the machine out of

operation immediately and secure it against restart.

• Have all malfunctions jeopardizing the safety of the operator or other

persons immediately repaired by an authorized service center.

Starting the engine of the machine

• Start the engine only according to the Operator’s Manual.

• Observe all warning and indicator lights.

• Do not use any liquid or gaseous starting aids (ether or starting fuel, for

example).

Machine operation

• Start and operate the machine only with the seat belt fastened and only

from the place provided for this.

• Put the machine into operation only if visibility is sufficient (have

another person guide you if necessary).

• Operation on slopes:

- Travel/work only uphill or downhill.

- Avoid machine travel across a slope, observe the machine’s permis-

sible inclination (and of the trailer if necessary).

- Keep loads on the uphill side of the machine and as close as

possible to it.

- Keep attachments/work equipment close to the ground.

• Adapt the travel speed to the circumstances (ground conditions,

weather conditions, for example).

• There is increased danger when reversing the machine. Persons in the

blind spot of the machine cannot be seen by the operator.

- Ensure that nobody is in the danger zone when changing the travel

direction.

• Never get on a moving machine and never jump off the machine.

BA WL38 * 01/2016 * BA_RL40_wSicherheit_us.fm * [en] 2-7

Safety 2

Machine travel on public roads/sites

• The specific national driving license is required.

• Observe the national regulations (road traffic regulations, for example)

during machine travel on public roads/sites.

• Ensure that the machine is in compliance with the national regulations.

• In order not to blind other motorists, using the existing work lights

during machine travel on public roads/site is prohibited.

• When crossing underpasses, bridges, tunnels, for example, ensure

that the clearance height and width is sufficient.

• The attachment fitted onto the machine must be certified for travel on

public roads/sites (see registration documents, for example).

• The attachment fitted onto the machine must be empty and in transport

position.

• The attachment fitted onto the machine must be equipped with the

mandatory lights and protective equipment.

• Take measures against unintentional operation of the operating

hydraulics.

• If the machine has different steering modes, ensure that the mandatory

steering mode is selected.

Stopping the engine of the machine

• Stop the engine only according to the Operator’s Manual.

• Before stopping the engine, lower the work equipment/attachment to

the ground.

Stopping and securing the machine

• Unbuckle the seat belt only after stopping the engine.

• Before leaving the machine, secure it to prevent it from rolling away

(parking brake, suitable wheel chocks, for example).

• Remove the starting key and secure the machine against unauthorized

operation.

2-8 BA WL38 * 01/2016 * BA_RL40_wSicherheit_us.fm * [en]

2 Safety

2.5 Lifting gear applications

Requirements

• Have loads fastened and the operator guided by a qualified person

having specific knowledge of lifting gear applications and the usual

hand signals.

• The person giving instructions to the operator must stay in visual

contact with the operator when fastening, guiding or removing the load

(maintain visual contact).

• If this not be possible, ask one more person with the same qualifica-

tions to guide.

• The operator may not leave his seat as long as the load is raised.

Fastening, guiding and removing loads

• Follow the applicable specific regulations for fastening, guiding and

removing a load.

• Wear protective clothing and equipment when fastening, guiding and

removing loads (hard hat, safety glasses, protective gloves, safety

boots, for example).

• Do not place lifting and fastening gear over sharp edges or rotating

parts. Loads must be fastened so as to prevent them from slipping or

falling.

• Move loads only on horizontal, level and firm ground.

• Move loads close to the ground.

• In order to avoid oscillating movements of loads:

- Perform smooth, slow movements with the machine.

- Use cables to guide the load (do not use hands to guide).

- Bear in mind the weather conditions (wind force, for example).

- Keep a minimum safety distance from objects.

• The operator may allow the load to be fastened and removed only if

the machine and its work equipment are not being moved.

• Danger zones must not overlap with the work zones of other machines.

BA WL38 * 01/2016 * BA_RL40_wSicherheit_us.fm * [en] 2-9

Safety 2

Lifting gear applications

• The machine and the attachment must be certified for lifting gear appli-

cations.

• Observe the national regulations for lifting gear applications.

• Lifting gear applications are procedures involving raising, transporting

and lowering loads with the help of lifting and fastening gear.

• The help of an accompanying person is necessary for fastening,

guiding and removing the load.

• There must be nobody under the load.

• Stop the machine immediately and stop the engine if persons enter the

danger zone.

• Use the machine for lifting gear applications ONLY if the mandatory

lifting gear (joint rod and load hook, for example) and safety equipment

(optical and acoustic warning devices, load holding control valve,

stability table, for example) is installed and functional.

• Use only lifting and fastening gear certified by a test/certification body,

observe the inspection intervals (Use only chains and shackles. No

belts, slings or cables).

• Do not use any lifting and fastening gear that is dirty, damaged or not

of sufficient size.

• Do not interrupt the work process with a load attached.

2-10 BA WL38 * 01/2016 * BA_RL40_wSicherheit_us.fm * [en]

2 Safety

2.6 Trailer operation

Trailer operation

• The machine must be certified for trailer operation.

• Observe the national regulations for trailer operation.

• The specific national driving license is required.

• Carrying passengers on/in trailers is PROHIBITED.

• Observe the maximum permissible tongue load and towing capacity.

• Do not exceed the permissible trailer speed.

• Trailer operation with the towing gear of the machine is prohibited.

• Trailer operation changes the machine’s operating behavior, the

operator must be familiar with this and act accordingly.

• Bear in mind the machine’s steering mode and the trailer’s turning

circle.

• Before hitching/unhitching the trailer, secure it to prevent it from rolling

away (parking brake, suitable wheel chocks, for example).

• There must be nobody between the machine and the trailer when

hitching a trailer.

• Hitch the trailer onto the machine correctly.

• Ensure that all equipment works correctly (brakes, lights, for example).

• Before starting machine travel, ensure that nobody is between the

machine and the trailer.

La page charge ...

Wacker Neuson WL38 Manuel utilisateur

Wacker Neuson WL38 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents