KitchenAid KFDD500ESS01 Le manuel du propriétaire

Catégorie
Cuisinières
Taper
Le manuel du propriétaire

Ce manuel convient également à

THANK YOU for purchasing this high-quality product. Register your new range at www.kitchenaid.com. In Canada, register your
range at www.kitchenaid.ca.
Forfuture reference, please make a note of your product model and serial numbers. These can be located on the serial plates. The
serial plates are located behind the control panel. You may view them by rotating the serial plates up.
Model Number Serial Number
Para una versi6n de estas instrucciones en espaSol, visite www.kitchenaid.com.
Debera tener los nQmeros de modelo y serie, que se pueden encontrar en las placas de serie detras del panel de control. Los puede
ver al rotar hacia arriba las placas de serie.
Table of Contents
RANGE SAFETY ....................................................................................... 2
The Anti-Tip Bracket ............................................................................. 3
FEATURE GUIDE ..................................................................................... 5
COOKTOP USE ........................................................................................ 8
Sealed Surface Burners ........................................................................ 8
Grates .................................................................................................... 9
Burner Size ............................................................................................ 9
Griddle ................................................................................................... 9
Cookware .............................................................................................. 9
Home Canning .................................................................................... 10
OVEN USE .............................................................................................. 11
Electronic Oven Controls .................................................................... 11
Keep Warm ......................................................................................... 12
Sabbath Mode .................................................................................... 12
Aluminum Foil ...................................................................................... 13
Positioning Racks and Bakeware ....................................................... 13
Roll-Out Rack ...................................................................................... 13
Oven Vents .......................................................................................... 14
Baking and Roasting ........................................................................... 14
Broiling ................................................................................................ 15
Lower Oven Convection Cooking ....................................................... 15
EasyConvect TM Conversion ................................................................ 15
Slow Cook ........................................................................................... 16
Cook Time ........................................................................................... 16
RANGE CARE ......................................................................................... 17
Self-Cleaning Cycle ............................................................................. 17
General Cleaning ................................................................................. 18
Oven Lights ......................................................................................... 18
PROBLEM SOLVER ............................................................................... 19
ACCESSORIES ...................................................................................... 21
WARRANTY ............................................................................................ 22
W106940610
RANGE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
WARNING: If the information in this manual is not followed exactly, a fire or explosion
may result causing property damage, personal injury or death,
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this
or any other appliance.
- WHAT TO DO IF YOU SMELL GAS:
Do not try to light any appliance.
Do not touch any electrical switch.
Do not use any phone in your building.
Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
instructions.
If you cannot reach your gas supplier, call the fire department.
- Installation and service must be performed by a qualified installer, service agency or
the gas supplier,
WARNING: Gas leaks cannot always be detected by smell.
Gas suppliers recommend that you use a gas detector approved by UL or CSA.
For more information, contact your gas supplier.
If a gas leak is detected, follow the "What to do if you smell gas" instructions.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
The Ant-Tip Bracket
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the anti-
tip bracket fastened down properly.
Tip Over Hazard
A child or adult can tip the range and be killed.
Verify the anti-tip bracket has been properly installed and engaged per installation instructions.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed and engaged.
Failure to follow these instructions can result in death or serious burns to children and adults.
Anti-Tip
Bracket
Ra
To verify the anti-tip bracket is installed and engaged:
Slide range forward.
Look for the anti-tip bracket securely attached to floor or wall.
Slide range back so rear range foot is under anti-tip bracket.
See installation instructions for details.
iMPORTANT
WARNING: To reduce the risk of fire, electrical shock, injury to
persons, or damage when using the range, follow basic
precautions, including the following:
[] WARNING: TO REDUCE THE RISK OF TIPPING OF THE
RANGE, THE RANGE MUST BE SECURED BY PROPERLY
INSTALLED ANTI-TIP DEVICES. TO CHECK IF THE DEVICES
ARE INSTALLED PROPERLY, SLIDE RANGE FORWARD,
LOOK FOR ANTI-TIP BRACKET SECURELY ATTACHED TO
FLOOR OR WALL, AND SLIDE RANGE BACK SO REAR
RANGE FOOT IS UNDER ANTI-TIP BRACKET.
[] WARNING: NEVER use this appliance as a space heater to
heat or warm the room. Doing so may result in carbon monoxide
poisoning and overheating of the oven.
[] WARNING: NEVER cover any slots, holes or passages in the
oven bottom or cover an entire rack with materials such as
aluminum foil. Doing so blocks air flow through the oven and
may cause carbon monoxide poisoning. Aluminum foil linings
may also trap heat, causing a fire hazard.
[] CAUTION: Do not store items of interest to children in
cabinets above a range or on the backguard of a range -
children climbing on the range to reach items could be seriously
injured.
[] Do Not Leave Children Alone - Children should not be left alone
or unattended in area where the range is in use. They should
never be allowed to sit or stand on any part of the range.
[] Wear Proper Apparel - Loose-fitting or hanging garments
should never be worn while using the range.
[] User Servicing - Do not repair or replace any part of the range
unless specifically recommended in the manual. All other
servicing should be referred to a qualified technician.
[] Storage in or on the Range - Flammable materials should not
be stored in an oven or near surface units.
[] Do Not Use Water on Grease Fires - Smother fire or flame or
use dry chemical or foam-type extinguisher.
[] Use Only Dry Potholders - Moist or damp potholders on hot
surfaces may result in burns from steam. Do not let potholder
touch hot heating elements. Do not use a towel or other bulky
cloth.
[] DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS -
Surface units may be hot even though they are dark in color.
Areas near surface units may become hot enough to cause
burns. During and after use, do not touch, or let clothing or
other flammable materials contact surface units or areas near
units until they have had sufficient time to cool. Among those
areas are the cooktop and surfaces facing the cooktop.
[] Never Leave Surface Units Unattended at High Heat Settings -
Boilover causes smoking and greasy spillovers that may ignite.
[] Glazed Cooking Utensils - Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed utensils
are suitable for range-top service without breaking due to the
sudden change in temperature.
[] Utensil Handles Should Be Turned Inward and Not Extend Over
Adjacent Surface Units - To reduce the risk of burns, ignition of
flammable materials, and spillage due to unintentional contact
with the utensil, the handle of a utensil should be positioned so
that it is turned inward, and does not extend over adjacent
surface units.
SAFETY
[]
iNSTRUCTiONS
Clean Cooktop With Caution - If a wet sponge or cloth
is used to wipe spills on a hot cooking area, be careful
to avoid steam burn. Some cleaners can produce
noxious fumes if applied to a hot surface.
[] Use Care When Opening Door - Let hot air or steam
escape before removing or replacing food.
[] Do Not Heat Unopened Food Containers - Build-up of
pressure may cause container to burst and result in
injury.
[] Keep Oven Vent Ducts Unobstructed.
[] Placement of Oven Racks - Always place oven racks in
desired location while oven is cool. If rack must be
moved while oven is hot, do not let potholder contact
hot heating element in oven.
[] DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN - Heating elements may be hot
even though they are dark in color. Interior surfaces of
an oven become hot enough to cause burns. During
and after use, do not touch, or let clothing or other
flammable materials contact heating elements or interior
surfaces of oven until they have had sufficient time to
cool. Other surfaces of the appliance may become hot
enough to cause burns - among these surfaces are
oven vent openings and surfaces near these openings,
oven doors, and windows of oven doors.
[] Proper Installation - The range, when installed, must be
electrically grounded in accordance with local codes or,
in the absence of local codes, with the National
Electrical Code, ANSI/NFPA 70. In Canada, the range
must be electrically grounded in accordance with
Canadian Electrical Code. Be sure the range is properly
installed and grounded by a qualified technician.
[] Disconnect the electrical supply before servicing the
appliance.
[] Injuries may result from the misuse of appliance doors
or drawers such as stepping, leaning, or sitting on the
doors or drawers.
[] Maintenance - Keep range area clear and free from
combustible materials, gasoline, and other flammable
vapors and liquids.
[] Top burner flame size should be adjusted so it does not
extend beyond the edge of the cooking utensil.
For self-cleaning ranges -
[] Do Not Clean Door Gasket - The door gasket is
essential for a good seal. Care should be taken not to
rub, damage, or move the gasket.
[] Do Not Use Oven Cleaners - No commercial oven
cleaner or oven liner protective coating of any kind
should be used in or around any part of the oven.
[] Clean Only Parts Listed in Manual.
[] Before Self-Cleaning the Oven - Remove broiler pan
and other utensils. Wipe off all excessive spillage before
initiating the cleaning cycle.
For units with ventilating hood -
[] Clean Ventilating Hoods Frequently - Grease should not
be allowed to accumulate on hood or filter.
[] When flambeing foods under the hood, turn the fan on.
SAVE THESE iNSTRUCTiONS
FEATURE GUIDE
This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or Frequently Asked
Questions (FAQs) section of our website at www.kitchenaid.com for more detailed instructions. In Canada, reference the Customer
Service section at www.kitchenaid.ca.
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
__UPPER OVEN__
BakeI Broil I Blow I Koop
Cook Warm
__ LOWER OVEN __
Bake I Broil I SteamBakeI Slow I Keep
Cook Warm
-- LOWER OVEN CONVECT--
Easy
Bake I Broil I Roast I C..... t
Oven Timer Cook Delay Self
Light I I I I
SET/OFF Time Start Clean
1 2 3
4 5 6 I c_t_ I
7 8 9
Clock 0 Options
KEYPAD FEATURE INSTRUCTIONS
CLOCK Clock This clock can use a 12- or 24-hour cycle. See "Electronic Oven Controls" section.
1. Press CLOCK.
2. Press "3" for AM or "6" for PM.
3. Press the number keypads to set the time of day.
4. Press CLOCK or START.
OVEN LIGHT oven cavity light While the oven doois are closed, press OVEN EIGHT to turn the lights on and 0if, The oven
!ights wi!l c°me °n when an °ven d°°r is °pened'
TIMER SET/OFF Oven timer The Timer can be set in hours or minutes up to 9 hours and 59 minutes.
1. Press TIMER SET/OFE
2. Press the number keypads to set the length of time in hr-min-min. Leading zeros do not
have to be entered. For example, for 2 minutes, enter "2."
3. Press TIMER SET/OFF to begin the countdown. If enabled, end-of-cycle tones will sound at
the end of countdown. The display will return to the time of day at the end of countdown.
4. Press TIMER SET/OFF to cancel the Timer and return to the time of day. Do not press the
Off keypads because the oven will turn off.
START Cooking start The Start keypad begins any oven function. If Start is not pressed within 2 minutes after
pressing a keypad, the function is canceled and the time of day is displayed,
OFF UPPER Range function The upper and lower Off keypads stop any oven function except the Clock, Timer and Control
OFF LOWER Lock in the selected oven.
BAKE UPPER
BAKE LOWER
Baking and 1. Press BAKE for the desired oven.
roasting 2. Press the number keypads to set the desired temperature. Ifthe temperature entered is not
in the range of the temperatures allowed, the mimmum or maxim um allowed temperature
will be displayed. Enter a temperature in the allowable range.
3. Press START.
4. To change the temperature, repeat Step 2. Press START for the change to take effect.
5. Press OFF for the selected oven when finishedL
KEYPAD FEATURE INSTRUCTIONS
BROIL UPPER Broiling 1. Press BROIL for the desired oven.
BROIL LOWER 2. Press the number keypads to set the desired temperature. If the temperature entered is not
in the range of the temperatures allowed, the minimum or maximum allowed temperature
will be displayed. Enter a temperature in the allowable range.
3. Press START. No preheating is necessary.
4. Position the cookware in the oven, and close the door.
5. Press OFF for the selected oven when finished.
CONVECT BAKE convection 11 Press coNVEcT BAKE.
cooking 2, Press the number keypads to set the desired temperature, if the temperatuie entered is not
in the range of the temperatures allowed, the minimum or maximum allowed temperature
will be displayed. Enter a temperature in the allowable range:
3' Press START.
Change the temperatuiel repeat step 21 Press take effect,
5. Press OFF LOWER When finished. .............................................................................................................................................................
CONVECT ROAST Convection 1. Press CONVECT ROAST.
cooking 2. Press the number keypads to set the desired temperature. If the temperature entered is not
in the range of the temperatures allowed, the minimum or maximum allowed temperature
will be displayed. Enter a temperature in the allowable range.
3. Press START.
4. To change the temperature, repeat Step 2. Press START for the change to take effect.
5. Press OFF LOWER when finished.
CONVECT BROIL convection 11 Press CONVECT BROIL!
cook ng
i 2. Press the number keypads to set the desired temperatuiel if the temperature entered is not
in the range of the temperatures allowed, the minimum or maximum allowed temperature
will be displayed, Enter a temperature in the a!!0wab!e range.
3. Press START.
4, To change the temperature, repeat Step 2. Press START for the change to take effect.
5. Press OFF LOWER When finished.
EASY CONVECT Recipe NOTE: For best results, preheat your oven to the required temperature prior to using
conversion for EasyConvect TM Conversion. After preheating is complete, press OFF LOWER before using
convection EasyConvect TM Conversion.
cooking 1. Press EASY CONVECT until the desired EasyConvect TM option is displayed (MEATS,
BAKED GOODS or OTHER).
2. Press START.
3. Press the number keypads to enter the standard cook temperature, and then press START.
4. Enter the standard cook time, and then press START.
5. Place food in the oven at the appropriate time.
Check food for doneness before the stop time is reached. If food will not be done when stop
time is reached, add more cooking time before time elapses. See "Cook Time" section. At
the end of the stop time, the oven will automatically turn off.
6. Press OFF LOWER when finished.
Refer to the "EasyConvect TM Conversion" section for more information.
SLOW COOK Slow cooking necessa_ to preheat the oven:
UPPER 1. PlaCefood in the upper or lower oVen:
SLOWCOOK Press SLOW COOK for the desired OVen:
LUWP-H 3' Press the number keypads to set the desired temperature if the temperature entered is not
in the range of the temperatures allowed, the minimum or maximum allowed temperature
wi!l be displayedl Enter a temperature in the al!owab! e range,
5. Press OFF for the selected oven when finished.
KEYPAD FEATURE INSTRUCTIONS
STEAM BAKE Steam bake
KEEP WARM
UPPER
KEEP WARM
LOWER
Hold warm
1. Insert the steam rack with water reservoir in the oven.
2. Pour 11/2cups (350 mL) of warm water into the water reservoir.
NOTE: Do not fill past the MAX mark.
3. Press STEAM BAKE.
4. Press the number keypad to select the desired food option.
5. Press the number keypads to set the temperature.
6. Press START.
7. (Optional) Press COOK TIME. Press the number keypads to set the cook time.
8. Press START.
9. Insert food when preheating finishes.
10. Press OFF LOWER when finished.
NOTE: Let oven cool before removing and emptying water reservoir.
Food must be at serving temperature before placing it in the warmed oven
1. Press KEEP WARM for the desired oven.
2. Press the number keypads to set the desired temperature. If the temperature entered is not
in the range of the temperatures allowed, the minimum or maximum allowed temperature
will be displayed. Enter a temperature in the allowable range.
3. Press START.
4. To change the temperature, repeat steps 2 and 3.
5. Press OFF for the selected oven when finished
DELAY START Delayed start The Delay Start keypad is used to enter the starting time for an oven function with a delayed
start. Delay Start should not be used for foods such as breads and cakes because they may not
bake properly.
To set a Cook Time or Delayed Cook Time, see the "Cook Time" section.
COOK TIME Timed Cooking Cook Time allows the oven to be Set to turn chat a Certain time of daY,€o0k for aset !ength of
To set a Cook Time or Delayed CookTime, see the !!Cook Time,! section.
SELF CLEAN Self-clean cycle See the "Self-Clean Cycle" section.
START CONTROL Oven c0ntrol Check that the ovens and timers are off.
LOCKhold 5 sec lockout 2 Press and hold START for 5 sec0ndsl
if enabied' a tone Will Sound'and"'CONTROE EocKED Wi!! be disp!aYedl
4, Repeat to un!ockl No keypads Wi!l funCtion with the controis loCked.
OPTIONS Oven use Enables you to personalize the audible tones and oven operation to suit your needs. See the
functions "Oven Use" section.
COOKTOP USE
Fire Hazard
Do not let the burner flame extend beyond the edge of
the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death
or fire.
Burner Cap: Always keep the burner cap in place when using a
surface burner. A clean burner cap will help avoid poor ignition and
uneven flames. Always clean the burner cap after a spillover and
routinely remove and clean the caps according to the "General
Cleaning" section.
Gas Tube Opening: Gas must flow freely throughout the gas tube
opening for the burner to light properly. Keep this area free of soil
and do not allow spills, food, cleaning agents or any other material
to enter the gas tube opening. Keep spillovers out of the gas tube
by always using a burner cap.
B
Electric igniters automatically light the surface burners when
control knobs are turned to (_.
Before setting a control knob, place filled cookware on the grate.
Do not operate a burner using empty cookware or without
cookware on the grate.
The flame should be adjusted so it does not extend beyond the
edge of the pan.
A. 1 to 1½" (2.5 to 3.8 cm)
B. Burner ports
Burner Ports: Check burner flames occasionally for proper size
and shape as shown in the previous illustration. A good flame is
blue in color, not yellow. Keep this area free of soil and do not allow
spills, food, cleaning agents or any other material to enter the
burner ports.
To Set:
1. Push in and turn knob counterclockwise to _.
All surface burners will click. Only the burner with the control
knob turned to _ will produce a flame.
2. Turn knob to anywhere between HIGH and LOW.
I REMEMBER: When range is in use, the entire cooktop area
I
may become hot.
I
To Clean:
IMPORTANT: Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Do not use oven cleaners, bleach
or rust removers.
1. Remove the burner cap from the burner base and clean
according to "General Cleaning" section.
2. Clean the gas tube opening with a damp cloth.
3. Clean clogged burner ports with a straight pin as shown. Do
not enlarge or distort the port. Do not use a wooden toothpick.
If the burner needs to be adjusted, contact a trained repair
specialist.
Power Failure
In case of prolonged power failure, the surface burners can be lit
manually. Hold a lit match near a burner and turn knob
counterclockwise to _. After burner lights, turn knob to desired
setting.
Sealed Surface Burners
0
4=
Replace the burner cap, making sure the alignment pins are
properly aligned with the burner cap.
A. Burner cap C.Alignment pins
B. Burner base D. Igniter
E. Gas tube opening
IMPORTANT: Do not obstruct the flow of combustion and
ventilation air around the burner grate edges.
5=
A. Incorrect
B. Correct
Turn on the burner. If the burner does not light, check cap
alignment. If the burner still does not light, do not service the
sealed burner yourself. Contact a trained repair specialist.
Grates
The grates on this range cover the full width of the cooktop. The
two grates may interlock (on some models), using the hook formed
into one end of both grates. The flat end of one grate drops onto
the hook on the other grate as shown in the following illustration.
Gr ddie
On some models, the two grates are identical and can be used on
either the left or right side of the cooktop. Grates that are designed
for use on only one side of the cooktop will have either "LEFT" or
"RIGHT" embossed on the bottom side of the grate.
Burner Sze
Select a burner that best fits your cookware. See the following
illustration and chart.
o @
Back of Range
Front of Ranae .
Burner Size Recommended Use
Small Low-heat cooking
Melting chocolate or butter
Oval For longer dishes
Large For large cookware
Extra-Large Most powerful burner
For large cookware
Griddle installed on right side of cooktop
To Use the Griddle:
1. Locate the griddle on the right side grate as shown. The
locating feet on the bottom of the griddle will engage the grate
tines to keep the griddle from sliding.
2. Before each use, brush on a thin layer of cooking oil to keep
food from sticking. Cooking sprays may leave a sticky residue
on the griddle that is hard to remove.
3. Preheat the griddle for 5 minutes. Preheating the griddle slowly
will ensure even heat distribution and will avoid warping the
griddle.
4. For preheating and cooking, set the front burner to the lowest
heat setting and the rear burner to medium-high heat for best
performance.
NOTE: The griddle may also be used on the left side grate. For
best results, the rear burner setting should be set to Medium-
Low or Medium, and the front burner setting should be set to
Low.
To Clean the Griddle:
1. Let the griddle cool, then empty the drip tray.
2. See the "General Cleaning" section for cleaning instructions.
3. Store griddle in a cool dry place.
IMPORTANT: Do not leave empty cookware on a hot surface
cooking area, element or surface burner.
Ideal cookware should have a flat bottom, straight sides and a well-
fitting lid, and the material should be of medium-to-heavy
thickness.
Rough finishes may scratch the cooktop or grates. Aluminum and
copper may be used as a core or base in cookware.
Cookware material is a factor in how quickly and evenly heat is
transferred, which affects cooking results.
Cookware with nonstick surfaces should not be used under the
broiler.
Cookware Characteristics
Check for flatness by placing the straight edge of a ruler across the
bottom of the cookware. While you rotate the ruler, no space or
light should be visible between it and the cookware.
Use the following chart as a guide for cookware material
characteristics.
Cookware Characteristics
Aluminum
Cast iron
Ceramic or
Ceramic glass
Copper
Heats quickly and evenly.
Suitable for all types of cooking.
Medium or heavy thickness is best for
most cooking tasks.
Heats slowly and evenly.
Good for browning and frying.
Maintains heat for slow cooking.
Follow manufacturer's instructions.
Heats slowly, but unevenly.
Ideal results on low to medium heat
settings.
Heats very quickly and evenly.
May leave copper residues, which
may be diminished if cleaned
immediately after cooking.
Earthenware/
Stoneware
Follow manufacturer's instructions.
Use on low heat settings.
Porcelain
enamel-on-
steel or cast
iron
See stainless steel or cast iron.
Stainless steel
Heats quickly, but unevenly.
A core or base of aluminum or copper
on stainless steel provides even
heating.
For best results, the cookware should be centered above the
burner with the bottom sitting level on the grate. The flame should
be adjusted so that it does not extend up the sides of the pan.
Home Canning
When canning for long periods, alternate the use of surface
burners between batches. This allows time for the most recently
used areas to cool.
Center the canner on the grate above the burner.
Do not place canner on 2 surface burners at the same time.
For more information, contact your local agricultural extension
office, or refer to published home canning guides. Companies
that manufacture home canning products can also offer
assistance.
10
OVEN
Odors and smoke are normal when the oven is used the first few
times, or when it is heavily soiled.
USE
IMPORTANT: The health of some birds is extremely sensitive to the
fumes given off. Exposure to the fumes may result in death to certain
birds. Always move birds to another closed and well-ventilated room.
Electronic Oven Controls
Control Display
The display will light up when first powered up or after a power
loss. When oven is not in use, the time of day is displayed.
Tones
Tones are audible signals, indicating the following:
One Tone
Valid keypad press.
Oven is preheated (long tone).
Kitchen timer (long tone with reminder tone every 60 seconds).
Function has been entered.
Three Tones
Invalid keypad press.
Four Tones
End of cycle (with reminder tone every 60 seconds).
Use the Options keypad to change the tone settings.
Options
Many features of the oven control can be adjusted to meet your
personal needs. These changes are made using the Options
keypad.
Use the Options keypad to scroll through the features that can be
changed. Each press of the Options keypad will advance the
display to the next setting. After selecting the feature to be
changed, the control will prompt you for the required input. Details
of all of the feature changes are explained in the following sections.
Press OFF UPPER or OFF LOWER to exit Options.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit, but can be changed to
Celsius.
1. Press OPTIONS until "TEMP UNIT" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
Audible Tones Disable
Turns off all tones, including the end of cycle tone and key press
tones.
1. Press OPTIONS until "SOUND" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
Sound Volume
Sets the pitch of the tone to either high or low.
1. Press OPTIONS until "SOUND VOLUME" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
End of Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
1. Press OPTIONS until "END TONE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
Key Press Tones
Activates or turns off the tones when a keypad is pressed.
1. Press OPTIONS until "KEYPRESS TONE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute after
the end of cycle tones.
1. Press OPTIONS until "REMINDER TONE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
12/24 Hour Clock
1. Press OPTIONS until "12/24 HOUR" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
Demo Mode
IMPORTANT: This feature is intended for use on the sales floor
with 120 V power connection and permits the control features to be
demonstrated without heating elements or burners turning on. If
this feature is activated, the oven will not work.
1. Press OPTIONS until "DEMO MODE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
12-Hour Shutoff
The oven control is set to automatically shut off the oven 12 hours
after the oven initiates a cook or clean function. This will not
interfere with any timed or delay cook functions.
1. Press OPTIONS until "12 HR AUTO OFF" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
11
Languages - Scrolling Display Text
Language options are English, Spanish and French.
1. Press OPTIONS until "LANGUAGE" is displayed.
2. The current setting will be displayed.
3. Press the number keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
Energy Save
The Energy Save mode deactivates the display to reduce energy
consumption.
1. Press OPTIONS until "ENERGY SAVE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
Oven Temperature Offset Control
IMPORTANT: Do not use a thermometer to measure oven
temperature. Elements will cycle on and off as needed to provide
consistent temperature, but they may run slightly hot or cool at
any point in time due to this cycling. Most thermometers are slow
to react to temperature change and will not provide an accurate
reading due to this cycling.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature can
be adjusted to personalize it for your cooking needs. It can be
changed to Fahrenheit or Celsius.
To Adjust Oven Temperature:
1. Press OPTIONS until "TEMP CALIB" is displayed.
2. The current setting will be displayed. Press the "1" keypad to
toggle between the upper and lower ovens.
3. Press START to select the choice displayed in Step 2. Wait
10 seconds for the display to change or press START, and then
continue with Step 4.
4. Press the "3" keypad to increase the temperature in 5°F (3°C)
increments, or press the "6" keypad to decrease the
temperature in 5°F (3°C) increments. The range is from -30°F to
+30°F (-18°C to +18°C).
5. Press OFF UPPER or OFF LOWER to exit and display the time
of day.
Keep Warm
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
IMPORTANT: Food must be at serving temperature before placing
it in the warmed oven. Food may be held up to 1 hour; however,
breads and casseroles may become too dry if left in the oven
during the Keep Warm function. For best results, cover food.
The Keep Warm feature allows hot cooked foods to stay at serving
temperature.
To Use:
1. Press KEEPWARMfor the desiredoven.
2.
Press the number keypads to set the desired temperature. If
the temperature entered is not in the range of the temperatures
allowed, the minimum or maximum allowed temperature will be
displayed. Enter a temperature in the allowable range.
NOTE: The temperature may be changed at any time by
pressing the number keypads to enter the desired temperature
and then START.
3. Press START.
4. Place food in the oven.
5. Press OFF for the selected oven when finished.
6. Remove food from the oven.
To Cancel Keep Warm Feature:
Press OFF for the selected oven. Remove food from oven.
Sabbath Mode
The Sabbath Mode sets the oven to remain on in a bake setting
until turned off.
When the Sabbath Mode is set, only the Bake cycle will operate. All
other cooking and cleaning cycles are disabled. No tones will
sound, and the displays will not indicate temperature changes.
When the oven door is opened or closed, the oven light will not turn
on or off, and the heating elements will not turn on or off
immediately.
NOTE: Warm Zone is not available when Sabbath Mode is
enabled.
To Enable Sabbath Mode Capability (One Time Only):
1. Press OPTIONS until "SABBATH" is displayed.
2. Press the "1" keypad. Sabbath Mode can be activated for
baking.
3. Press START, OFF UPPER or OFF LOWER to save the setting
and exit to display the time of day.
NOTE: To disable the Sabbath Mode, repeat steps 1 through 3
to change the status from "SABBATH ON" to "SABBATH OFE"
To Activate Sabbath Mode:
1. Press BAKEfor the desiredoven.
2. Press the number keypads to set the desired temperature. If
the temperature entered is not in the range of the temperatures
allowed, the minimum or maximum allowed temperature will be
displayed. Enter a temperature in the allowable range.
3. Press START.
For timed cooking in Sabbath Mode, press COOK TIME, and
then press the number keypads to set the desired cook time.
Press START.
4. (Optional) If Sabbath Mode is to be used for both ovens, repeat
steps 1 through 3 for the second oven.
5. Press OPTIONS. Three tones will sound. Then press "7." "SAb"
will appear in the display.
To Adjust Temperature (when Sabbath Mode is running in only
one oven):
1. Press the number keypad as instructed by the scrolling text to
select the new temperature.
NOTE: The temperature adjustment will not appear on the
display, and no tones will sound. The scrolling text will be
shown on the display as it was before the keypad was pressed.
2. Press START.
To Adjust Temperature (when Sabbath Mode is running in both
ovens):
1. Press BAKE for the desired oven.
2.
Press the number keypad as instructed by the scrolling text to
select the new temperature.
NOTE: The temperature adjustment will not appear on the
display, and no tones will sound. The scrolling text will be
shown on the display as it was before the keypad was pressed.
3. Press START.
To Deactivate Sabbath Mode:
Press OPTIONS, and then press "7" to return to regular baking, or
press OFF UPPER or OFF LOWER to turn off the oven(s).
12
Alumnum Fol
IMPORTANT: To avoid permanent damage to the oven bottom
finish, do not line the oven bottom with any type of foil or liner.
For best cooking results, do not cover entire oven rack with foil
because air must be able to move freely.
Pos t oning Rad<s and Bakeware
IMPORTANT: To avoid permanent damage to the porcelain finish,
do not place food or bakeware directly on the oven door or bottom.
Racks
Position racks before turning on the oven.
Do not position racks with bakeware on them.
Make sure racks are level.
Place food so it will not rise into the broil element. Allow at least
1/2"(1.3 cm) between pans and the broil element.
To move a rack, pull it out to the stop position, raise the front edge,
and then lift it out. Use the following illustrations and charts as a
guide for positioning racks.
Rack Positions - Upper Oven
Baking and Broiling
Food Rack Position
All foods 1
Rack Positions - Lower Oven
Baking Layer Cakes on 2 Racks
For best results when baking cakes on 2 racks, use rack positions
1 (roll-out rack) and 4 (flat rack) with the Convection Bake function.
Place the cakes on the racks as shown. If using 2 flat racks, use
rack positions 2 and 4.
Baking Cookies on 2 Racks
For best results when baking cookies on 2 racks, use rack
positions 1 (roll-out rack) and 4 (flat rack) with the Bake function. If
using 2 flat racks, use rack positions 2 and 4.
Bakeware
To cook food evenly, hot air must be able to circulate. Allow 2"
(5.0 cm) of space around bakeware and oven walls. Use the
following chart as a guide.
Number Position on Rack
of Pan(s)
1 Center of rack.
2 Side by side.
3 or 4 Refer to the previous illustration.
Roll-Out Rack
The roll-out rack allows easy access to position and remove food in
the oven. The roll-out rack should not be used in rack position 5.
Open Position
Food Rack Position
Large roasts or poultry 1
Roasted meats 2
Most baked goods, casseroles 3
Broiled meats, poultry, fish 4
Broiling/searing meats, hamburgers, steaks 5
For hamburger patties to have a well-seared exterior and a rare
interior in the lower oven, use a flat rack in rack position 5. Side 1
should cook for approximately 21/2to 31/2minutes. Side 2 should
cook for approximately 4 to 5 minutes. Expect a moderate degree
of smoke when broiling.
Multiple Rack Cooking
2-rack: Use rack positions 2 and 4 for regular baking with the roll-
out rack in position 2.
2-rack (convection only): Use rack positions 2 and 4 for convection
baking with the roll-out rack in position 2.
NOTE: The roll-out rack in the lower oven sits midway between
adjacent rack positions. The roll-out rack should not be used in
rack position 5.
A. Slide rafts
B. Sliding shelf
Closed and Engaged Position
B
...._: _:___ .......................................B
......A
A. Slide rafts
B. Sliding shelf
13
To Insert Roll-Out Rack
1. Angle rack assembly up, and then insert intothe "V" cutout in
the rack guides of the oven cavity.
2. Keep rack assembly lifted up at an angle, and then push in to
bypass the lower "V" cutout.
3. Gently slide rack assembly into oven, bypassing the "V"
cutouts.
A
_S
A. "V" cutout
B. Rack guides
To Remove Roll-Out Rack
1. Push the sliding shelf in completely so that it is in the closed
and engaged position.
2. Using 2 hands, gently pull the sliding shelf and the slide rails at
the same time to the "V" cutout. Angle the rack so that the front
is higher than the back, and then gently pull rack past "V"
cutout and then out of the oven.
To avoid damage to the sliding shelves, do not place more than
25 Ibs (11.4 kg) on the rack.
Do not clean the roll-out rack in a dishwasher. It may remove the
rack's lubricant and affect its ability to slide.
See the "General Cleaning" section for more information.
Oven Vents
.......A
A. Upper oven vent
B. Lower oven vent
The oven vents release hot air and moisture from the ovens, and
should not be blocked or covered. Blocking or covering the vents
will cause poor air circulation, affecting cooking and cleaning
results. Do not set plastics, paper or other items that could melt or
burn near the oven vents.
Baking and Roast ng
Preheating
When beginning a Bake, Convect Bake or Convect Roast cycle, the
oven will begin preheating after Start is pressed. The oven will take
approximately 12 to 15 minutes to reach 350°F (177°C) with all of
the oven racks provided with your oven inside the oven cavity.
Higher temperatures will take longer to preheat. The preheat cycle
rapidly increases the oven temperature. The actual oven
temperature will go above your set temperature to offset the heat
lost when your oven door is opened to insert food. This ensures that
when you place your food in the oven, the oven will begin at the
proper temperature. Insert your food when the preheat tone sounds.
Do not open the door during preheat before the tone sounds.
Oven Temperature
While in use, the oven elements will cycle on and off as needed to
maintain a consistent temperature, but they may run slightly hot or
cool at any point in time due to this cycling. Opening the oven door
while in use will release the hot air and cool the oven which could
impact the cooking time and performance. It is recommended to
use the oven light to monitor cooking progress.
NOTE: On models with convection, the convection fan may run in
the non-convection bake mode to improve oven performance.
Temperature Management System
The Temperature Management System electronically regulates the
oven heat levels during preheat and bake to maintain a precise
temperature range for optimal cooking results. The bake and broil
elements or burners cycle on and off in intervals. On convection
range models, the fan will run while preheating and may be cycled
on and off for short intervals during bake to provide the best
results. This feature is automatically activated when the oven is in
use.
Before baking and roasting, position racks according to the
"Positioning Racks and Bakeware" section. When roasting, it is not
necessary to wait for the oven preheat cycle to end before putting
food in unless it is recommended in the recipe.
Steam Bake
The Steam Bake function works in conjunction with the steam rack
to provide additional moisture during baking. The steam rack
contains a water reservoir which heats up and releases steam in to
the oven cavity during the steam bake cycle. There are
3 preprogrammed food options to choose from: Breads, Desserts
and Fish, as well as a Refresh/Reheat option.
For best performance, place the steam rack in the lowest available
rack position in the cavity and pour 1_/2cups (350 mL) of water into
the reservoir. Do not fill past the MAX level indicated on the
reservoir.
After the steam bake cycle is complete, some water may remain in
the reservoir. This is normal. Wait for the oven to cool and discard
the water.
A. Steam rack
B. Water reservoir
14
Brol ng
Close the oven door while broiling. No preheating is necessary.
Position food on grid in a broiler pan, and then place it in the center
of the oven rack.
NOTE: Odors and smoke are normal the first few times the oven is
used or if the oven is heavily soiled.
Changing the temperature when broiling allows more precise
control when cooking. The lower the broil setting, the slower the
cooking. Thicker cuts and unevenly shaped pieces of meat, fish
and poultry may cook better at lower broil settings. Refer to the
"Positioning Racks and Bakeware" section for more information.
On lower settings, the broil element will cycle on and off to maintain
the proper temperature.
For best results, use a broiler pan and grid. It is designed to
drain juices and help avoid spatter and smoke.
Ifyou would like to purchase a broiler pan, one may be ordered.
Please refer to the "Accessories" section for more information.
Lower Oven Convect on Cook ng
In a convection oven, the fan-circulated hot air continually
distributes heat more evenly than the natural movement of air in a
standard thermal oven. This movement of hot air helps maintain a
consistent temperature throughout the oven, cooking foods more
evenly, crisping surfaces while sealing in moisture and yielding
crustier breads.
During convection cooking, the bake, broil and convection (true
convection only) elements cycle on and off in intervals to maintain
the oven temperature, while the fan circulates the hot air.
If the oven door is opened during convection cooking, the fan will
turn off immediately. It will come back on when the oven door is
closed.
NOTE: The oven door must be closed for convection broiling.
Position the racks according to the "Positioning Racks and
Bakeware" section before starting convection cooking.
With convection cooking, most foods can be cooked at a lower
temperature or for a shorter length of time. These adjustments can
be made using the following chart or by using the EasyConvect TM
Conversion feature on your range.
Setting Guidelines
CONVECT
BAKE
Reduce the standard baking temperature 25°F
(15°C).
CONVECT
BROIL
Use standard recipe temperature. Cooking time
may be reduced so the food should be checked
for doneness early.
CONVECT Use standard recipe temperature. Cooking time
ROAST may be reduced by 15 to 30% with Convect
Roast so the food should be checked for
doneness early.
Bow Tie True Convection with T.H.E. TM Element
True convection adds an electric element around the convection
fan to enhance the cooking performance. Use the following
Convect Options chart as a guide.
Convect Options
Setting Foods
CONVECT Single or multiple-rack baking for cookies,
BAKE biscuits, breads, casseroles, tarts, tortes.
CONVECT Thicker cuts or unevenly shaped pieces of meat,
BROIL fish or poultry.
CONVECT Whole chicken or turkey, vegetables, pork
ROAST roasts, beef roasts.
EasyConvect TMConvers on
Convection cooking temperatures and times can differ from those
of standard cooking. Depending upon the selected category,
EasyConvect TM Conversion automatically reduces the standard
recipe temperature and/or time you input for convection cooking.
Foods are grouped into 3 general categories. Choose the category
most appropriate for the food to be cooked. Use the following chart
as a guide.
Setting Foods
MEATS Chicken: whole and pieces
Meat loaf, Roasts: pork, beef and ham
(Turkey and large poultry are not included because
their cook time varies.)
BAKED
GOODS
Biscuits, Breads: quick and yeast
Cakes and Cookies
Casseroles
OTHER Frozen convenience foods: french fries,
nuggets, fish sticks, lasagna
To Use:
NOTE: For best results, preheat your oven to the desired
temperature prior to using EasyOonvect TM Conversion. After
preheating is complete, press OFF LOWER before using
EasyOonvect TM Conversion.
1. Press EASY CONVECT until the desired option (MEATS,
BAKED GOODS or OTHER) is displayed.
2. Press START.
3. Press number pads to enter standard cook temperature, and
then press START.
4. Press number pads to enter standard cook time, and then
press START.
5. Place the food in the oven.
Check food for doneness before the stop time is reached. If
food will not be done when the stop time is reached, add more
cooking time before time elapses. See "Cook Time" section. At
the end of the stop time, the oven will automatically turn off.
6. Press OFF LOWER when finished.
7. Remove food from the oven.
15
Slow Cool<
Slow Cook is best for food items such as beef, poultry and pork.
This cycle is available to cook food at low temperatures for long
periods of time. Food can be cooked up to 12 hours depending on
the temperature chosen.
Recommended Temperature Range:
4 hour cook time = 250°F to 300°F (120°C to 150°C)
8 hour cook time = 200°F to 250°F (93°C to 120°C)
12 hour cook time = 170°F to 226°F (77°C to 108°C)
Food should be completely thawed.
Cover food to keep food moist.
Prior to Slow Roasting, meat can be pan seared or broiled on
sides to enhance browning, flavor and tenderness.
Use a flat rack in position 3 for best results.
To Use Slow Cook:
Before using Slow Cook, see the "Positioning Racks and
Bakeware" section. It is not necessary to preheat the oven.
Place food in oven.1=
2.
3.
4=
Press SLOW COOK for the desired oven.
Press the number keypads to set the desired temperature. If
the temperature entered is not in the range of the temperatures
allowed, the minimum or maximum allowed temperature will be
displayed. Enter a temperature in the allowable range.
Press START.
"Preheating" will show in the display until the set temperature is
reached.
"Lo" will also appear in the display until the oven reached a
temperature of at least 170°F (77°C).
When an oven temperature of at least 170°F (77°C) is reached,
the oven display will show the temperature increasing. A single
tone will sound when the set temperature is reached.
5. Press OFF for the selected oven when finished.
Cook Tim e
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
To
1.
2.
3.
4.
5.
6.
Set a Timed Cook:
Press the keypad for any cooking function except Self-Clean or
Keep Warm.
Press the number keypads to set the desired temperature. If
the temperature entered is not in the range of the temperatures
allowed, the minimum or maximum allowed temperature will be
displayed. Enter a temperature in the allowable range.
Press COOK TIME.
Press the number keypads to enter the length of time to cook.
Press START.The display will count down the time. When the
time ends, the oven will shut off automatically.
The temperature and/or time setting can be changed at any
time by repeating steps 2 through 5.
Press OFF for the desired oven to clear the display.
NOTE: The time setting for any timed cooking function,
including EasyConvect TM Conversion, can be adjusted by
repeating steps 3 through 5.
To
1.
2.
3.
4=
5.
6.
7.
8.
Set a Delayed Timed Cook:
Press DELAYSTART.
Press the number "1" or "2" keypad to select the desired oven.
Press the number keypads to enter the number of hours and/or
minutes you want to delay the start time.
Press the keypad for any cooking function except Keep Warm.
Press the number keypads to choose the appropriate clean
level or set the desired temperature. If the temperature entered
is not inthe range of the temperatures allowed, the minimum or
maximum allowed temperature will be displayed. Enter a
temperature in the allowable range.
Press START or COOK TIME.
Press the number keypads to enter the length of time to cook.
Press START.
When the start time is reached, the oven will automatically turn on.
The temperature and/or time settings can be changed after the
delay countdown by repeating steps 1 through 7. When resetting
the time and temperature, it is necessary to press Start between
steps 4 and 5 to continue making changes.
When the set cook time ends, the oven will shut off automatically.
9. Press OFF for the desired oven to clear the display.
16
RANGE CARE
Self-Cleaning Cycle
To stop the Self-Cleaning cycle at anytime, press OFF UPPER or
OFF LOWER. If the temperature is too high, the oven doors will
remain locked.
Burn Hazard
Do not touch the oven during the Self-Cleaning cycle.
Keep children away from oven during
Self-Cleaning cycle.
Failure to follow these instructions can result in burns.
When "LOCK" shows in the display, the doors of the oven cannot
be opened. To avoid damage to the doors, do not force the doors
open when "LOCK" is displayed.
Before self-cleaning, make sure the doors are completely closed or
the doors will not lock and the Self-Cleaning cycle will not begin.
NOTE: Only one oven can use the Self-Clean cycle at a time, and
12 hours must pass before the next Self-Clean can begin.
The oven is preset for a 3-hour clean cycle; however, the time can
be changed. Suggested clean times are 2 hours for light soil and
between 3 hours and 4 hours for average to heavy soil.
Use the following chart as a guide to determine the desired
cleaning level.
IMPORTANT: The health of some birds is extremely sensitive to the
fumes given off during the Self-Cleaning cycle. Exposure to the
fumes may result in death to certain birds. Always move birds to
another closed and well-ventilated room.
Do not block the oven vent(s) during the Self-Cleaning cycle. Air
must be able to move freely. Depending on your model, see "Oven
Vent" or "Oven Vents" section.
Do not clean, rub, damage or move the oven door gasket.
Prepare Range:
Remove the broiler pan, grid, cookware and bakeware, all
cooking utensils, oven racks and aluminum foil and, on some
models, the temperature probe from the oven.
Use a damp cloth to clean inside door edge and the 11/2''
(3.8 cm) area around the inside oven cavity frame, being certain
not to move or bend the gasket.
Wipe out any loose soil to reduce smoke and avoid damage. At
high temperatures, foods react with porcelain. Staining,
etching, pitting or faint white spots can result. This will not
affect cooking performance.
Remove plastic items from the cooktop because they may
melt.
NOTE: The cooktop burners will not function during the self-clean
cycle.
IMPORTANT:
Cleaning Level Total Cleaning Time
(Includes a 30 Minute Cool Down Time)
1 (Quick) 2 hours
2 2 hours 30 minutes
3 3 hours
4 (reg) 3 hours 30 minutes
5 4 hours
6 (Maxi) 4 hours 30 minutes
To Self-Clean:
1. Close the oven doors, and then press SELF CLEAN.
2. Press the number "1" or "2" keypad to select the desired oven
to clean.
3. Choose the clean level desired by pressing the appropriate
number keypad.
4. Press START.
The oven doors will automatically lock.
When the Self-Clean cycle is complete and the oven cools, the
oven doors will unlock.
5. When the oven is completely cooled, remove ash with a damp
cloth.
Oven temperature must be below 500°F (260°C) to program a
clean cycle.
Only 1 oven can be cleaned at a time.
Both oven doors will lock when either oven is running the Self-
Cleaning cycle.
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in the
oven may result in discoloring, loss of gloss, hairline cracks and
popping sounds.
The Self-Cleaning cycle uses very high temperatures, burning soil
to a powdery ash.
Once the oven has completely cooled, remove ash with a damp
cloth. To avoid breaking the glass, do not apply a cool damp cloth
to the inner door glass before it has completely cooled.
To Delay Start Self-Clean:
1. Close the oven doors, and then press DELAY START.
2. Press the number "1" or "2" keypad to select the desired oven.
3. Press the number keypads to enter the desired amount of time
by which you want to delay the start.
4. Press SELF CLEAN.
5. Choose the clean level desired by pressing the appropriate
number keypad.
6. Press START.
The oven doors will automatically lock.
When the Self-Clean cycle is complete and the oven cools, the
oven doors will unlock.
7. When the oven is completely cooled, remove ash with a damp
cloth.
The oven light will not work during the Self-Cleaning cycle.
17
General Cleaning
IMPORTANT: Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Always follow label instructions on
cleaning products. For additional information, you can visit the
Frequently Asked Questions section of our website at
www.kitchenaid.com. In Canada, reference the Customer Service
section at www.kitchenaid.ca.
Soap, water and a soft cloth or sponge are suggested first unless
otherwise noted.
EXTERIOR PORCELAIN ENAMEL SURFACES (on some
models)
Foodspills containing acids, such as vinegar and tomato, should
be cleaned assoon asthe entire range is cool. These spills may
affect the finish.
Cleaning Method:
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing
pad:
Gently clean around the model/serial/rating plate because
scrubbing may remove numbers.
affresh®Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See "Accessories" section for more information.
STAINLESS STEEL (on some models)
NOTE: To avoid damage to stainless steel surfaces, do not use
soap-filled scouring pads, abrasive cleaners, affresh ®Cooktop
Cleaner, steel-wool pads, gritty washcloths or abrasive paper
towels. Damage may occur to stainless steel surfaces, even with
one-time or limited use.
Cleaning Method:
Rub in direction of grain to avoid damaging.
affresh®Stainless Steel Cleaner Part Number W10355016 (not
included):
See "Accessories" section for more information.
METALLIC PAINT (on some models)
Do not use abrasive cleaners, cleaners with bleach, rust removers,
ammonia or sodium hydroxide (lye) because paint surface may
stain.
PORCELAIN-COATED GRATES AND CAPS
Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the cooktop, grates and caps are cool.
These spills may affect the finish.
To avoid chipping, do not bang grates and caps against each
other or hard surfaces such as cast iron cookware.
Do not reassemble caps on burners while wet.
Cleaning Method:
Nonabrasive plastic scrubbing pad and mildly abrasive
cleanser:
Clean as soon as cooktop, grates and caps are cool.
Dishwasher (grates only, not caps):
Use the most aggressive cycle. Cooked-on soils should be
soaked or scrubbed before going into a dishwasher.
Gas Grate and Drip Pan Cleaner Part Number 31617A:
See "Accessories" section for more information.
SURFACE BURNERS
See "SealedSurface Burners" section.
COOKTOP CONTROLS
To avoid damage to the cooktop controls, do not use steel wool,
abrasive cleansers or oven cleaner.
Toavoid damage, do not soak knobs. When replacing knobs, make
sure knobs are in the Off position.
On some models, do not remove seals under knobs.
Cleaning Method:
Soap and water:
Pull knobs straight away from control panel to remove.
GRIDDLE
Toavoid damaging the nonstick surface, do not clean the griddle in
the dishwasher, or use steel wool and abrasive cleaners.
Cleaning Method:
Mild detergent.
CONTROL PANEL AND OVEN DOOR EXTERIOR
To avoid damage to the control panel, do not use abrasive
cleaners, steel-wool pads, gritty washcloths or abrasive paper
towels.
Cleaning Method:
Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
affresh ®Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See "Accessories" section for more information.
OVEN RACKS
Cleaning Method:
Steel-wool pad.
For racks that have discolored and are harder to slide, a light
coating of vegetable oil applied to the rack guides will help
them slide.
Dishwasher (steam rack water reservoir only, not racks):
Although the water reservoir is durable, it may lose its shine
and/or discolor when washed in a dishwasher.
OVEN CAVITY
Do not use oven cleaners.
Food spills should be cleaned after the oven cools. At high
temperatures, foods react with porcelain and staining, etching,
pitting or faint white spots can result.
Cleaning Method:
Clean cycle:
See "Self-Cleaning Cycle" section.
Oven Lghts
The oven lights are standard 40-watt appliance bulbs. Before
replacing, make sure the oven and cooktop are cool and the
control knobs are in the Off position.
To Replace:
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb, and then bulb cover by turning clockwise.
5. Plug in range or reconnect power.
18
PROBLEM SOLVER
First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call, refer
to the warranty page in this manual and scan the code there with your mobile device, or visit http'//kitchenaid.custhelp.com. In Canada,
visit http'//www, kitchenaid.ca.
Contact us by mail with any questions or concerns at the address below:
In the U.S.A.: In Canada:
KitchenAid Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
Please include a daytime phone number in your correspondence.
KitchenAid Brand Home Appliances
Customer eXperience Centre
200 - 6750 Century Ave.
Mississauga, Ontario L5N 0B7
PROBLEM POSSIBLE CAUSES AND/OR SOLUTIONS
Nothing will operate
Surface burners will not
operate
Surface burner flames are
uneven, yellow and/or
noisy
Excessive heat around
cookware on cooktop
Cooktop cooking results
not what expected
Oven will not operate
Oven temperature too high
or too low
Display shows messages
Power supply cord is unplugged - Plug into a grounded outlet.
Household fuse is blown, or a circuit breaker is tripped - Replace the fuse or reset the circuit breaker.
Ifthe problem continues, call an electrician.
The control displays an F9 or F9 E0 error code - The electrical outlet in the home may be miswired.
Contact a qualified electrician to verify the electrical supply.
The control knob is not set correctly - Push in knob before turning to a setting.
Air in the gas lines - If this is the first time the surface burners have been used, turn on any one of the
surface burner knobs to release air from the gas lines.
Clogged burner ports - See the "Sealed Surface Burners" section.
Clogged burner ports - See the "Sealed Surface Burners" section.
Burner caps positioned improperly - See the "Sealed Surface Burners" section.
Range converted improperly - If propane gas is being used, contact a service technician or see the
"Warranty" section for contact information.
Cookware and flame are not matched - The cookware should be centered above the burner with the
bottom sitting level on the grate. The flame should be adjusted so that it does not extend up the sides of
the pan.
Improper cookware - Ideal cookware should have a flat bottom, straight sides and a well fitting lid, and
the material should be of a medium to heavy thickness.
Control knob set to incorrect heat level - See the "Cooktop Use" section.
Range is not level - Level the range. See the Installation Instructions.
Delay Start is set - See the "Cook Time" section.
Control Lock is on - Press and hold START for 5 seconds to unlock.
Control is in Demo Mode - See the "Electronic Oven Controls" section. Demo Mode is used for display
models in a showroom.
Electronic oven control set incorrectly - See the "Electronic Oven Controls" section.
Oven temperature needs adjustment - See "Oven Temperature Control" in the "Electronic Oven
Controls" section.
Power failure (display shows flashing time) - Clear the display. On some models, reset the clock, if
needed. See "Clock" keypad feature in the "Feature Guide" section.
Error code (display shows letter followed by number) - Depending on your model, press OFF
UPPER to clear the display. See "Control Display" in the "Electronic Oven Controls" section. If it
reappears, call for service. See the "Warranty" section for contact information.
Start needs to be pressed so a cycle can begin (display shows "PUSH" or "PSH") - See the "Start"
keypad feature in the "Feature Guide" section.
Range is in Sabbath Mode (display shows "SAb"} - Press OFF to exit Sabbath Mode.
Clean cycle did not work on Several cooking cycles between Clean cycles or spills on oven walls and doors - Run additional
all spills Clean cycles, affresh ®Kitchen and Appliance Cleaner or affresh®Cooktop Cleaner can be used for
stubborn soils. See the "Accessories" and "Self-Cleaning Cycle" sections for more information.
19
PROBLEM
Oven cooking results not
what expected
POSSIBLE CAUSES AND/OR SOLUTIONS
Range is not level - Level the range. See the Installation Instructions.
The set temperature was incorrect - Double-check the recipe in a reliable cookbook.
Oven temperature needs adjustment - See "Oven Temperature Control" in the "Electronic Oven
Controls" section.
Oven was not preheated - See the "Baking and Roasting" section.
Racks were positioned improperly - See the "Positioning Racks and Bakeware" section.
Not enough air circulation around bakeware - See the "Positioning Racks and Bakeware" section.
Batter distributed unevenly in pan - Check that batter is level in the pan.
Darker browning of food caused by dull or dark bakeware - Lower the oven temperature 25°F (15°C)
or move rack to a higher position in the oven.
Lighter browning of food caused by shiny or light colored bakeware - Move rack to a lower position
in the oven.
Incorrect length of cooking time was used - Adjust cooking time.
Oven door was not closed - Be sure that the bakeware does not keep the door from closing.
Oven door was opened during cooking - Oven peeking releases oven heat and can result in longer
cooking times.
Rack is too close to bake burner, making baked items too brown on bottom - Move rack to higher
position in the oven.
Pie crusts browning too quickly - Use aluminum foil to cover the edge of the crust and/or reduce
baking temperature.
Noises
PROBLEM POSSIBLE CAUSES AND/OR SOLUTIONS
Surface burner making Wet burner - Allow itto dry.
poppingnoises
2O
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

KitchenAid KFDD500ESS01 Le manuel du propriétaire

Catégorie
Cuisinières
Taper
Le manuel du propriétaire
Ce manuel convient également à

dans d''autres langues