Yamaha 15 Le manuel du propriétaire

Marque: Yamaha

Modèle: 15

Catégorie: Récepteurs AV

Taper: Le manuel du propriétaire

Ce manuel convient également à

TSS-15

OWNER’S MANUAL

MODE D’EMPLOI

HOME THEATER SOUND SYSTEM

SYSTEME HOME CINEMA

TSS-15

(Amplifier x 1, Front/Center speaker x 3, Surround speaker x 2, Subwoofer x 1)

To assure the ﬁnest performance, please read this manual

carefully. Keep it in a safe place for future reference.

Install this sound system in a well ventilated, cool, dry, clean

place with at least 20 cm on top, 10 cm on the left and right,

and 10 cm at the back of the ampliﬁer unit — and away from

direct sunlight, heat sources, vibration, dust, moisture, and/or

cold.

Locate this system away from other electrical appliances,

motors, or transformers to avoid humming sounds. To prevent

ﬁre or electrical shock, do not place this system where it may

be exposed to dripping or splashing, and never put any objects

ﬁlled with liquids, such as vases, on top of the system.

Do not expose this system to sudden temperature changes from

cold to hot. Do not locate this system in an environment with

high humidity (i.e., a room with a humidiﬁer) to prevent

condensation inside this system, which may cause electrical

shock, ﬁre, damage to this system, and/or personal injury.

Avoid installing this system in a place where foreign objects

or liquid might fall. Otherwise, ﬁre, damage to the system,

and/or personal injury may result. Do not place the following

objects on this system:

– Other components, as they may cause damage and/or

discoloration of the surface of the system.

– Burning objects (i.e., candles) as they may cause ﬁre,

damage to the system, and/or personal injury.

– Containers of liquid, as they may leak or spill and cause

electrical shock to the user and/or damage to this system.

Do not cover this system with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If the

temperature inside this system rises, it may result in ﬁre,

damage to the system, and/or personal injury.

Do not plug this system into a wall outlet until all

connections are complete.

Do not operate this system upside-down. It may overheat,

possibly causing damage.

Do not use excessive force on switches, knobs, and/or cables.

When disconnecting the power cable from a wall outlet,

grasp the plug; do not pull the cable.

Do not clean this system with chemical solvents; they might

damage the ﬁnish. Use a clean, dry cloth.

Only the voltage speciﬁed on this system may be used. Using

this system with a voltage higher than speciﬁed is dangerous

and may cause ﬁre, damage to the system, and/or personal

injury. YAMAHA will not be held responsible for any

damage resulting from use of this system with a voltage other

than speciﬁed.

To prevent damage by lightning, disconnect the power cable

from the wall outlet during an electrical storm.

Take care of this system to prevent foreign objects and/or

liquid drops from entering the system.

When using a humidiﬁer, avoid condensation inside the

system by allowing sufﬁcient space around the system. Avoid

excess humidiﬁcation. Condensation might cause a ﬁre,

damage to the system, and/or electric shock.

Do not attempt to modify or ﬁx this system. Contact qualiﬁed

YAMAHA service personnel when any service is needed.

The cabinet should never be opened for any reason.

When not planning to use this system for a long period of

time (i.e., vacation), disconnect the AC power plug from the

wall outlet.

Be sure to read the “Troubleshooting” section for

information on common operating errors before concluding

that this system is faulty.

Before moving this system, press STANDBY/ON to place

the system in standby mode, and disconnect the AC power

plug from the wall outlet.

Be sure to only use the AC adaptor (LSE9802B1540)

included with this system. Otherwise, you might cause a ﬁre

or damage to this system.

■

For U.K. customers

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, the plug should be removed and an

appropriate 3-pin plug ﬁtted. For details, refer to the instructions

below.

Note

A plug severed from the mains lead must be destroyed, as a plug

with bared ﬂexible cord is hazardous if engaged in a live socket

outlet.

■

Special Instructions for U.K. Model

CAUTION: READ THIS BEFORE OPERATING YOUR SYSTEM.

• This system is not fully disconnected from the AC power

source as long as it is connected to a wall outlet, even if the

system is turned off. This state is called Standby mode. In

Standby mode, the system consumes a very small amount

of power.

• Do not install the system in a horizontal orientation as this

may cause damage or malfunction.

• This system is designed for use in a home. Do not attempt

to install it in an automobile. Doing so may cause damage

or malfunction.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus

may not correspond with the coloured markings identifying

the terminals in your plug, proceed as follows:

The wire that is coloured BLUE must be connected to the

terminal that is marked with the letter N or coloured BLACK.

The wire that is coloured BROWN must be connected to the

terminal that is marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth

terminal of the three-pin plug.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

English

●

Home Theater Sound System

With the Yamaha TSS-15 Home Theater Sound Sys-

tem, you can enjoy 5.1-channel surround sound at

home—just like being at the movies.

●

Dolby Digital, Pro Logic II, DTS & AAC

With Dolby Digital and DTS, you can enjoy the sur-

round sound of DVD movies. With Dolby Pro Logic II,

you can enjoy 5.1-channel surround from legacy Dolby

Surround sources and normal stereo sources. The gen-

eral model also supports AAC (Advanced Audio Cod-

ing).

●

Cinema DSP

Yamaha’s Cinema DSP technology offers Movie,

Music, Sports, and Game listening modes for an

enhanced listening experience.

●

Silent Cinema

With Yamaha’s Silent Cinema technology, you can

enjoy multichannel surround sound even when using

headphones.

●

Virtual Surround

With the Virtual Surround function, you can enjoy

5.1-channel surround sound even when not using the

surround left and right speakers. The surround speakers

can then be used with the front speakers to provide

extra power.

●

Active Servo Technology

The subwoofer uses Yamaha’s Active

Servo technology to deliver incredible

bass from its compact cabinet.

●

QD-Bass Technology

The subwoofer employs Yamaha’s

QD-Bass (Quatre Dispersion Bass)

technology, which uses a down-ﬁring driver with a

square, pyramid-shaped reﬂective plate to radiate the

sound in four horizontal directions, providing extraor-

dinary power and performance.

Features ................................................. 1

Contents ................................................. 1

Package Contents ...................................... 2

Preparing the Remote Control ....................... 2

Fitting the Stand........................................ 2

Getting to Know the TSS-15 .......................... 3

Installing the Speakers................................ 6

Hooking Up the System ............................... 8

Connecting the Speakers.........................................9

Connecting Your Other Components....................10

Connecting the Power Cable.................................11

Basic Operation ...................................... 12

Adjusting Speaker Levels with the Test Tone ... 13

Using the Cinema DSP Listening Modes ......... 14

Other Listening Modes .............................. 15

Troubleshooting...................................... 17

Glossary ............................................... 19

Specifications ........................................ 20

Features

Contents

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are

trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Surround” are registered trademarks

of Digital Theater Systems, Inc.

Silent Cinema is a registered trademark of Yamaha

Corporation.

The “AAC” logo is a trademark of Dolby Laboratories.

These are AAC patent numbers.

08/937,950 5,633,981 5,227,788 5,299,239

5848391 5 297 236 5,285,498 5,299,240

5,291,557 4,914,701 5,481,614 5,197,087

5,451,954 5,235,671 5,592,584 5,490,170

5 400 433 07/640,550 5,781,888 5,264,846

5,222,189 5,579,430 08/039,478 5,268,685

5,357,594 08/678,666 08/211,547 5,375,189

5 752 225 98/03037 5,703,999 5,581,654

5,394,473 97/02875 08/557,046 05-183,988

5,583,962 97/02874 08/894,844 5,548,574

5,274,740 98/03036 5,299,238 08/506,729

Make sure that you have all the items shown here.

The remote control comes with the battery already

installed. Before using the remote control for the very ﬁrst

time, pull out the plastic tab, as shown.

For information on replacing the battery, see page 18.

Before using the TSS-15 ampliﬁer for the very ﬁrst time,

you must ﬁt the stand for stability. Do not use the ampliﬁer

horizontally. Put the stand onto the base of the ampliﬁer,

and with a Phillips screwdriver, screw it to the ampliﬁer

with the two screws provided, as shown.

Afﬁx four non-skid pads onto the base of the stand to pre-

vent it from slipping.

Package Contents

TSS-15 WD76700

MOVIE MUSIC SPORTS

MUTE

SW CENTER SURR

NIGHT

TEST

DUAL MONO

GAME

MODE

STANDBY/ON

VOLUME

INPUT

23 4

SP LEVEL

NATURAL SOUND HOME THEATER SYSTEM TSS-15

SILENT CINEMA

-6 -4 -2 0 +2 +4 +6

1234

234567

DTS

MAIN

/SUB

INPUT

NIGHT

MOVIE MUSIC

MOVIE MUSIC SPORTS GAME

MODE INPUT

STANDBY/ON

VOLUME

AUTOq

Digital

Pro Logic

AAC

Remote control

Fastener

Non-skid pads

AC adaptor

(LSE9802B1540)

Stand

Screws

Optical cable Audio pin cable

Power cable

Satellite speakersTSS-15 ampliﬁer Subwoofer

(Front L/R and center speakers have 3 meter cords,

surround L/R speakers have 10 meter cords.)

Preparing the Remote Control

Plastic tab

Fitting the Stand

non-skid

pads

English

■

Front Panel

Status, volume & level indicators

These are multipurpose indicators. Normally, they

work as status indicators, indicating input signal format

(Dolby Digital, DTS, etc) or Pro Logic II listening

mode. When the VOLUME control is adjusted, they

indicate the volume level setting from 1 through 7.

After several seconds, they revert to status indicators,

and work as explained below. They’re also used when

adjusting individual speaker levels with the test tone

(–6, –4, –2, 0, +2, +4, +6).

• AAC indicator (general model only)

This indicator lights up when an AAC signal is input.

• DTS indicator

This indicator lights up when a DTS signal is input.

• Dolby Digital indicator

This indicator lights up when a Dolby Digital signal

is input.

• MAIN/SUB indicator

When listening to a multilingual TV program, this

indicator lights up green when the main language is

selected, and lights up red when the sub-language is

selected. Main and sub are selected by using the

remote control’s [DUAL MONO] button.

• MOVIE indicator

This indicator lights up when the Dolby Pro Logic II

Movie listening mode is selected.

• MUSIC indicator

This indicator lights up when the Dolby Pro Logic II

Music listening mode is selected.

• AUTO indicator

This indicator lights up when the Auto listening mode

is selected.

INPUT 1–4 indicators

These indicators show which input is currently

selected.

NIGHT indicator

This indicator lights up when the Night listening mode

is selected (see page 15).

MOVIE, MUSIC, SPORTS & GAME buttons

These buttons are used to select the Movie, Music,

Sports, and Game Cinema DSP listening modes. The

button for the selected mode lights up (see page 14).

MODE button

This button is used to select the following listening

modes: Dolby Pro Logic II Movie, Dolby Pro Logic II

Music, or Auto (see page 15). It can also be used to

cancel the Cinema DSP listening modes.

INPUT button

This button is used to select inputs 1 through 4 (see

page 12).

STANDBY/ON button

This button is used to set the TSS-15 to On or Standby

(see page 12).

Note:

While on Standby, the TSS-15 consumes a small

amount of power so that it’s able to receive commands

from the remote control.

Getting to Know the TSS-15

NATURAL SOUND HOME THEATER SYSTEM TSS-15

SILENT CINEMA

-6 -4 -2 0 +2 +4 +6

1234

234567

DTS

MAIN

/SUB

INPUT

NIGHT

MOVIE MUSIC

MOVIE MUSIC SPORTS GAME

MODE INPUT

STANDBY/ON

VOLUME

AUTOq

Digital

Pro Logic

AAC

(general model)

-6 -4 -2 0 +2 +4 +6

23456 7

DTS

MAIN

/SUB

MOVIE MUSIC AUTOq

Digital

Pro Logic

AAC

Status indicators

Volume and level indicators

VOLUME control

This control is used to adjust the volume.

Remote control sensor

This sensor receives infrared signals from remote con-

trol.

SILENT CINEMA headphones jack

A pair of headphones can be connected to this mini

jack for private listening. With Yamaha’s Silent Cinema

technology, you can enjoy multichannel surround

sound even when using headphones. No sound is out-

put by the speakers while a plug is inserted in this jack.

■ Remote Control

STANDBY/ON [ ] button

This button is used to set the TSS-15 to On or Standby.

Note:

While on Standby, the TSS-15 consumes a small

amount of power so that it’s able to receive commands

from the remote control.

2 MODE button

This button is used to select the following listening

modes: Dolby Pro Logic II Movie, Dolby Pro Logic II

Music, or Auto (see page 15). It can also be used to

cancel the Cinema DSP listening modes.

3 MOVIE, MUSIC, SPORTS & GAME buttons

These buttons are used to select the Movie, Music,

Sports, and Game Cinema DSP listening modes. The

button for the selected mode lights up (see page 14).

4 VOLUME [–] & [+] buttons

These buttons are used to adjust the volume. The Down

[–] button reduces the volume, the Up [+] button

increases it.

5 MUTE button

This button is used to mute the TSS-15. While the

TSS-15 is muted, the volume level indicators ﬂash.

Press is again to unmute the TSS-15.

6 SP LEVEL buttons

These buttons are used to adjust the levels of the sub-

woofer (SW), center speaker (CENTER), and surround

speakers (SURR) (see page 12).

7 NIGHT button

This button is used to set the Night listening mode (see

page 15).

8 TEST button

This button is used to turn the test tone on or off (see

page 13).

9 DUAL MONO button

When listening to a multilingual TV program, this but-

ton can be used to select the main, sub, or both lan-

guages.

0 INPUT buttons 1–4

These buttons are used to select inputs 1 through 4 (see

page 12).

MOVIE MUSIC SPORTS

MUTE

SW CENTER SURR

NIGHT

TEST

DUAL MONO

GAME

MODE

STANDBY/ON

VOLUME

INPUT

23 4

SP LEVEL

English

■ Using the Remote Control

Remote Control Precautions

• Do not spill water or other liquids on the remote control.

• Do not drop the remote control.

• Do not subject the remote control to the following:

— high humidity, such as near a shower or bath

— high temperatures, such as near a heater or stove

— extremely low temperatures

— dusty environments

NATURAL SOUND HOME THEATER SYSTEM TSS-15

-6 -4 -2 0 +2 +4 +6

1234

23456 7

DTS

MAIN

/SUB

INPUT

NIGHT

MOVIE MUSIC

MOVIE MUSIC SPORTS GAME

MODE INPUT

STANDBY/ON

VOLUME

AUTOq

Digital

Pro Logic

SILENT CINEMA

AAC

30° 30°

Up to 6 meters

Point the remote control

toward the TSS-15’s

remote control sensor.

Before you connect the speakers to the TSS-15 ampliﬁer,

you need to decide where to install them. To get the best

results from the TSS-15, use all ﬁve satellite speakers and

the subwoofer.

The three satellite speakers with 3-meter cords are the front

left, front right, and center speakers. The two satellite

speakers with 10-meter cords are the surround left and sur-

round right speakers.

The following illustration shows the ideal position for each

speaker relative to the TV and listening position.

■ Front Speakers

The front speakers output the main sound. Place them

either side of your TV, an equal distance from the listening

position.

■ Center Speaker

With movies, the center speaker is used mainly for dialog.

Position it centrally between the front speakers, preferably

on top of your TV.

■ Surround Speakers

The surround left and right speakers output surround

effects and ambience. They should be positioned behind

the listening position, equidistant from the listener.

■ Subwoofer

The subwoofer outputs the bass sounds of the LFE (Low-

Frequency Effects) channel. Since bass sounds are nondi-

rectional, the position of the subwoofer is not as important

as for the other speakers. In general, a good bass sound can

be achieved by putting the subwoofer in a corner at the

front of the room. To prevent sound reﬂections from nearby

walls, turn it inward so that it faces the listening position.

Note:

The TSS-15 ampliﬁer is designed to be used vertically. If

it’s used horizontally, heat may build up inside the case,

causing damage or malfunction.

■ Preparing the Satellite Speakers

To prevent the satellite speakers from slipping, or vibrating

when mounting on the wall, afﬁx four non-skid pads to the

base of each speaker stand, as shown.

To adjust the angle of a speaker, using a Phillips screw-

driver, loosen the screw at the back of the stand, adjust the

angle, and then tighten the screw.

Note:

Do not put the speakers on uneven surfaces.

■ Wall-Mounting the Satellite Speakers

The satellite speakers can be wall-mounted by using two #8

wood screws (sold separately).

1 Using a Phillips screwdriver, loosen the screw

at the back of the speaker stand, set the angle

of the speaker as you want it, and then tighten

the screw.

Installing the Speakers

Ampliﬁer

Subwoofer

Surround right

speaker

Front left

speaker

Front right

speaker

Surround left

speaker

Center speaker

non-skid

pads

0–90˚

English

2 Position the speaker on the wall where you

want to hang it, and use a pencil to mark the

two hole positions.

3 Screw two #8 screws into the wall, leaving a

5 mm gap to accept the keyhole slots.

4 Thread the speaker cord around the strain-

relief guide and out through the slot at the

front of the speaker stand, as shown.

5 Fit the speaker stand onto the screws and

push it down so that the screw heads sit

correctly in the keyhole slots.

Cautions:

• Each satellite speaker weighs 0.4 kg. Heed the following

cautions to ensure that the speakers do not fall and cause

damage or injury.

• Once the satellite speakers have been mounted on the

wall, check each speaker to ensure that there’s no possi-

bility of it falling. Yamaha cannot be held responsible for

any damage or injury caused by falling speakers.

• If you have hollow walls, make sure that the screws go

into the studs. If there are no studs, or the walls are solid,

use suitable wall anchors.

• Use 1-inch #8 screws (4 mm shank diameter) with a head

diameter of 8 mm or less.

• Do not use nails or double-sided tape to mount the

speakers.

• Use cord clips to secure the speaker cords to the wall.

■ Securing the Center Speaker to Your TV

To prevent the center speaker from slipping, you can secure

it to your TV by using the fastener provided. You must

remove its stand ﬁrst.

Notes:

• Do not put the center speaker on top of your TV if it

overhangs (i.e., the top of the TV is not deep enough).

• Do not put the center speaker on top of your TV if the top

is not level.

• Do not touch the adhesive side of the fastener after peel-

ing off the backing.

•Wipe the top of your TV before attaching the fastener.

1 To remove the center speaker’s stand, using a

Phillips screwdriver, remove the screw and

washer at the back of the stand.

Keep the screw and washer for future use.

2 Peel the backing off one side of the fastener,

and afﬁx it to the top of your TV.

3 Peel the backing off the other side of the

fastener, and afﬁx the center speaker on top.

Note:

Although the speakers are magnetically shielded to prevent

interference, if the TV picture is distorted, try moving the

speakers away from your TV.

20 mm

minimum

5 mm gap

4 mm

diameter

40 mm

Peel off the

backing

Bottom of speaker

You can connect up to four audio components to the

TSS-15. This could be a DVD player, CD player, games

console, TV, VCR, DVR (digital video recorder), set-top

box (digital satellite, cable, over the air), camcorder, and so

on. The following diagram shows a typical setup.

Caution:

Before making any connections, disconnect each compo-

nent’s power cable from the wall outlet.

Notes:

• Connect the white plug of the audio cable to the left “L”

(white) jack. Connect the red plug to the right “R” (red)

jack.

• Push each plug ﬁrmly into its jack. Lose connections can

cause noise or malfunction.

• Before connecting your other components to the

TSS-15, refer to their instruction manuals.

• Do not connect video signals to any of the TSS-15’s

jacks. The TSS-15 only supports audio signals.

Hooking Up the System

UND H

R SYS

20+2+4 +6

1234

23456 7

/SU

NPU

MUS

NPU

VCR

DVD player

Games console

TV, set-top box, etc

To wall outlet

AC adaptor

Surround

left speaker

Front left

speaker

Center

speaker

Front right

speaker

Surround

right speaker

Subwoofer

* Since it has no video inputs or outputs, only audio

signals can be connected to the TSS-15.

TSS-15

English

The diagram below shows how to connect the speakers to

the TSS-15.

The three satellite speakers with 3-meter cords are the front

left, front right, and center speakers. The two satellite

speakers with 10-meter cords are the surround left and sur-

round right speakers.

Cautions:

• Connect only the included speakers to the TSS-15.

Speakers from other manufacturers are not designed to

work with the TSS-15 and may use different connectors.

•Never connect the speaker outputs to another ampliﬁer,

as this may cause a malfunction, seriously damage the

TSS-15 or ampliﬁer, or cause a ﬁre.

•To prevent people from tripping over or damaging the

speaker cables, tidy and secure them once they’re con-

nected.

■ Speaker Outputs

FRONT L/R

Connect the front left and right speakers.

2 SURROUND L/R

Connect the surround left and right speakers.

3 CENTER

Connect the center speaker.

4 SUBWOOFER

Connect the subwoofer.

Connecting the Speakers

FRONT

SPEAKER

OUTPUTS

DC IN 15V

SURROUND

DIGITAL

OFF

INPUT

VIRTUAL

ANALOG

CENTER

SUBWOOFER

NATURAL SOUND HOME THEATER SYSTEM TSS-15

-6 -4 -2 0 +2 +4 +6

1234

23456 7

DTS

MAIN

/SUB

INPUT

NIGHT

MOVIE MUSIC

MOVIE MUSIC SPORTS GAME

MODE INPUT

STANDBY/ON

VOLUME

AUTOq

Digital

Pro Logic

SILENT CINEMA

AAC

Front left

speaker

Front

right

speaker

Surround left

speaker

Surround

right

speaker

Center

speaker

Subwoofer

TSS-15

TSS-15 rear panel

Speaker outputs

The following diagram shows how to connect your components to the TSS-15.

■ Audio Inputs

The TSS-15 has four audio inputs. Inputs 1, 2, and 3 accept

digital audio signals. Input 4 accepts analog audio signals.

1 DIGITAL INPUT 1

Use the supplied optical digital audio cable to connect

the digital audio output of a DVD player, etc., to this

optical digital input.

2 DIGITAL INPUT 2

Use an optical digital audio cable (sold separately) to

connect the digital audio output of a TV, etc., to this

optical digital input.

3 DIGITAL INPUT 3

Use a coaxial digital audio cable (sold separately) to

connect the digital audio output of a CD player, etc., to

this optical digital input.

4 ANALOG INPUT 4

Use the audio cable to connect the analog audio output

of a VCR, etc., to this analog input.

Notes:

•You can connect your computer to ANALOG INPUT 4

by using a mini plug to RCA conversion cable, or an

adaptor.

• Since the TSS-15 doesn’t have any video inputs and out-

puts, connect the video output from your DVD player or

VCR directly to your TV.

Connecting Your Other Components

FRONT

SPEAKER

OUTPUTS

DC IN 15V

SURROUND

DIGITAL

OFF

INPUT

VIRTUAL

ANALOG

CENTER

SUBWOOFER

OPTICAL

DIGITAL

OUTPUT

OPTICAL

DIGITAL

OUTPUT

COAXIAL DIGITAL

OUTPUT

NATURAL SOUND HOME THEATER SYSTEM TSS-15

-6 -4 -2 0 +2 +4 +6

1234

23456 7

DTS

MAIN

/SUB

INPUT

NIGHT

MOVIE MUSIC

MOVIE MUSIC SPORTS GAME

MODE INPUT

STANDBY/ON

VOLUME

AUTOq

Digital

Pro Logic

SILENT CINEMA

AAC

Dust cap

Before connecting an opti-

cal digital cable, remove

the dust cap, as shown.

Keep the cap for future

use. To keep out dust, reﬁt

the cap when the jack is

not being used.

TSS-15

Rear panel

Audio cable

Optical cable

Coaxial cable

(sold separately)

VCR, etc

CD player, etc

TV, set-top box

(digital satellite,

cable, over the air),

etc

DVD player,

games console,

etc

Optical cable (sold separately)

Input jacks

English

Do not connect the power cable until you have completed and double-checked all audio connections.

1 Connect the AC adaptor to the DC IN 15V jack

on the TSS-15’s rear panel.

2 Connect the power cable to the AC adaptor.

3 Plug the power cable into a suitable wall

outlet.

Cautions:

• Unplug the power cable from the wall outlet if you plan

not to use the TSS-15 for an extended period.

• If you put the AC adaptor on a shelf or rack, position it

so that it’s unlikely to fall, as it may cause injury or dam-

age to another component or itself.

• Use only the included AC adaptor with the TSS-15

ampliﬁer. Using another adaptor may cause a malfunc-

tion or ﬁre.

• Do not use the AC adaptor with any device other than the

TSS-15.

Connecting the Power Cable

DC IN 15V

SURROUND

DIGITAL

OFF

INPUT

VIRTUAL

ANALOG

CENTER

SUBWOOFER

NATURAL SOUND HOME THEATER SYSTEM TSS-15

-6 -4 -2 0 +2 +4 +6

1234

23456 7

DTS

MAIN

/SUB

INPUT

NIGHT

MOVIE MUSIC

MOVIE MUSIC SPORTS GAME

MODE INPUT

STANDBY/ON

VOLUME

AUTOq

Digital

Pro Logic

SILENT CINEMA

AAC

AC adaptor

power cable

To wall outlet

TSS-15 rear panel

TSS-15

This section explains the basic operation.

■ Listening to a Sound Source

1 To turn on the TSS-15, press the

[STANDBY/ON] button.

The STANDBY/ON button on the TSS-15 lights up.

2 Turn on the source component.

3 Use the remote control’s INPUT buttons, or

the TSS-15’s [INPUT] button to select the

input to which the component is connected.

The INPUT indicator for the selected input lights up.

4 Start playback on the component.

See the component’s instruction manual for details.

5 Use the remote control’s VOLUME Up [+] and

Down [–] buttons, or the TSS-15’s VOLUME

control to adjust the volume.

While it’s being adjusted, the volume level is shown by

the TSS-15’s volume indicators for several seconds.

■ Adjusting the Level of the Subwoofer,

Center, or Surround Speakers

While listening to a sound source, use the SP LEVEL Up

[+] and Down [–] buttons to adjust the level of the sub-

woofer (SW), center speaker (CENTER), or surround

speakers (SURR).

Notes:

• The TSS-15 supports Dolby Digital, DTS, and AAC

(general model only) digital audio with a sampling rate

of 48 kHz or less, and PCM audio up to 96 kHz.

• The Cinema DSP and Dolby Pro Logic II listening

modes cannot be used with 96 kHz PCM audio.

• The subwoofer, center, and surround speaker levels can-

not be adjusted while a pair of headphones is connected.

■ Muting the TSS-15

To temporarily mute the TSS-15, press the remote control’s

[MUTE] button. The volume level indicators ﬂash on the

TSS-15. To unmute the TSS-15, press the [MUTE] button

again. If you adjust the volume while the TSS-15 is muted,

or press any other button, it will be unmuted automatically.

■ Turning Off the TSS-15

To turn off the TSS-15, press the [STANBY/ON] button on

the remote control or TSS-15 to set it to Standby.

While on Standby, the TSS-15 consumes a small amount of

power so that it’s able to receive commands from the

remote control.

Note:

The next time you turn on the TSS-15, the previously

selected input (1–4) and listening mode will be selected

automatically.

Basic Operation

NATURAL SOUND HOME THEATER SYSTEM TSS-15

-6 -4 -2 0 +2 +4 +6

1234

2345 67

DTS

MAIN

/SUB

INPUT

NIGHT

MOVIE MUSIC

MOVIE MUSIC SPORTS GAME

MODE INPUT

STANDBY/ON

VOLUME

AUTOq

Digital

Pro Logic

SILENT CINEMA

AAC

TSS-15 WD76700

MOVIE MUSIC SPORTS

MUTE

SW CENTER SURR

NIGHT

TEST

DUAL MONO

GAME

MODE

STANDBY/ON

VOLUME

INPUT

23 4

SP LEVEL

INPUT

STANDBY/ON

VOLUME

SP LEVEL

TSS-15 Remote control

MOVIE MUSIC SPORTS

MUTE

SW CENTER SURR

NIGHT

TEST

GAME

MODE

STANDBY/ON

VOLUME

SP LEVEL

Press the [MUTE]

button to mute the

TSS-15

English

It’s important that all speakers can be heard equally at the

listening position. The TSS-15 has a built-in test tone for

adjusting the level of each speaker.

Notes:

• The test tone cannot be used while a pair of headphones

is connected.

• The Night listening mode cannot be used while the test

tone is being output.

• The test tone can be used with the Virtual Surround func-

tion (see page 16).

This procedure should be performed from the listening

position.

1 To turn on the TSS-15, press the

[STANDBY/ON] button.

The STANDBY/ON button on the TSS-15 lights up.

2 Set the volume to about 4.

3 Press the [TEST] button.

The test tone is output by each speaker for 2.5 seconds

in the following order: front left, center, front right, sur-

round right, surround left, subwoofer.

The TSS-15’s CINEMA DSP buttons indicate which

speaker is currently outputting the test tone, as shown

below.

Note:

If the test tone is too quiet, turn up the TSS-15 ampliﬁer’s

VOLUME control. If it’s too loud, turn it down.

4 While the test tone is being output by a

speaker, use the VOLUME Up [+] and Down [–]

buttons to adjust its level.

While the level is being adjusted, the test tone will con-

tinue to be output by the same speaker. When you stop

adjusting the level, the test tone will be output by the

next speaker in the order stated above.

Notes:

• The level of each speaker is shown by the volume level

indicators on the TSS-15 (–6, –4, –2, 0, +2, +4, +6).

• The front left and right speaker levels cannot be set

above 0.

•To reset all speakers to their default levels, while the test

tone is being output, press the TSS-15 ampliﬁer’s

[MODE] button for two seconds.

5 When you’ve ﬁnished adjusting the level of

each speaker, press the [TEST] button again

to turn off the test tone.

Adjusting Speaker Levels with the Test Tone

TSS-15 WD76700

MOVIE MUSIC SPORTS

MUTE

SW CENTER SURR

NIGHT

TEST

DUAL MONO

GAME

MODE

STANDBY/ON

VOLUME

INPUT

23 4

SP LEVEL

VOLUME +/–

STANDBY/ON [ ]

TEST

Center

speaker

Front left

speaker

Front right

speaker

Listening

position

Surround left

speaker

Surround right

speaker

Subwoofer

MOVIE MUSIC SPORTS GAME

Yamaha’s Cinema DSP technology offers Movie, Music,

Sports, and Game listening modes for an enhanced listen-

ing experience. In addition, you can use all ﬁve speakers

even with stereo music sources, including CDs, videos,

games, and so on.

To select the Cinema DSP listening modes, use the

[MOVIE], [MUSIC], [SPORTS], and [GAME] buttons.

The corresponding button lights up. To turn the mode off,

press the button again, or press the [MODE] button.

Notes:

• The Cinema DSP listening modes cannot be used with

mono or multilingual (main/sub) audio sources.

• The TSS-15 remembers which listening mode you previ-

ously used with each input so the next time you select an

input, the listening mode is selected automatically.

• Feel free to chose a listening mode based on your listen-

ing preference, and not purely on the name of the mode

itself.

■ About the Cinema DSP Listening Modes

Notes:

• The Cinema DSP listening modes can be used with

Dolby Digital, DTS, AAC (general model only), PCM,

or analog audio sources.

• When used with a Dolby Digital, DTS, or AAC (general

model only) source, the DIGITAL, DTS, or AAC

indicator lights up.

• When used with a stereo (2-channel) source, Dolby Pro

Logic II Movie mode is used to create 5.1-channels, and

the MOVIE indicator lights up.

Using the Cinema DSP Listening Modes

TSS-15 WD76700

MOVIE MUSIC SPORTS

MUTE

SW CENTER SURR

NIGHT

TEST

DUAL MONO

GAME

MODE

STANDBY/ON

VOLUME

INPUT

23 4

SP LEVEL

NATURAL SOUND HOME THEATER SYSTEM TSS-15

-6 -4 -2 0 +2 +4 +6

1234

2345 67

DTS

MAIN

/SUB

INPUT

NIGHT

MOVIE MUSIC

MOVIE MUSIC SPORTS GAME

MODE INPUT

STANDBY/ON

VOLUME

AUTOq

Digital

Pro Logic

SILENT CINEMA

AAC

MODE

CINEMA

DSP

TSS-15 Remote control

Listening mode Description

Movie

With this mode, you can enjoy a movie theater-like experience in your own home

theater.

The TSS-15’s [MOVIE] button lights up when this mode is selected.

Music

With this mode you can experience the excitement of a live concert hall.

The TSS-15’s [MUSIC] button lights up when this mode is selected.

Sports

With this mode, you can enjoy watching sports surrounded by the sounds of the

crowd, the stadium, and the game.

The TSS-15’s [SPORTS] button lights up when this mode is selected.

Game

With this mode, you can enjoy the dynamics and thrills of three-dimensional sur-

round sound effects.

The TSS-15’s [GAME] button lights up when this mode is selected.

MOVIE MUSIC SPORTS GAME

English

■ Using Dolby Pro Logic II

With Dolby Pro Logic II, you can enjoy 5.1-channel sur-

round from legacy Dolby Surround sources (video, laser

disc,

etc

) or normal stereo sources (CDs, etc). There are

two modes: Movie mode for watching movies, and Music

mode for listening to music.

To select Dolby Pro Logic II, use the [MODE] button to

select Movie mode or Music mode. The Pro Logic II

MOVIE or MUSIC indicator lights up.

■ Listening with No Processing

With Auto mode, you can listen to music and other sources

with no Cinema DSP processing. Analog and PCM sources

will be heard through the front left and right speakers and

subwoofer. Dolby Digital, DTS, and AAC (general model

only) will be decoded and output by the appropriate speak-

ers.

To select Auto mode, press the [MODE] button repeatedly

until the AUTO indicator lights up.

■ Night Listening Mode

In Night Listening mode, the audio dynamic range is

reduced so that you can hear quiet dialog even when listen-

ing at low volume levels—useful when you don’t want to

disturb anyone else.

Note:

The Cinema DSP listening modes can be used with Night

listening mode.

1 To select Night listening mode, press the

[NIGHT] button.

The NIGHT indicator lights up.

2 To cancel Night listening mode, press the

[NIGHT] button again.

■ Using Headphones & Silent Cinema

With the Silent Cinema function, you can enjoy multichan-

nel surround sound, including Dolby Digital and DTS,

even when using headphones.

To use Silent Cinema, simply connect your headphones to

the SILENT CINEMA headphones jack.

Notes:

• No sound is output by the speakers while a plug is

inserted in the SILENT CINEMA headphones jack.

• Silent Cinema can be used with the Cinema DSP listen-

ing modes.

•To listen to stereo (2-channel) sources (CDs, etc) without

Silent Cinema, turn off the Cinema DSP listening

modes, and use the [MODE] button to select Auto mode.

Other Listening Modes

TSS-15 WD76700

MOVIE MUSIC SPORTS

MUTE

SW CENTER SURR

NIGHT

TEST

DUAL MONO

GAME

MODE

STANDBY/ON

VOLUME

INPUT

23 4

SP LEVEL

NIGHT

Remote control

NATURAL SOUND HOME THEATER SYSTEM TSS-15

-6 -4 -2 0 +2 +4 +6

1234

2345 67

DTS

MAIN

/SUB

INPUT

NIGHT

MOVIE MUSIC

MOVIE MUSIC SPORTS GAME

MODE INPUT

STANDBY/ON

VOLUME

AUTOq

Digital

Pro Logic

SILENT CINEMA

AAC

SILENT CINEMA

Front panel

■ Virtual Surround

With the Virtual Surround function, you can enjoy

5.1-channel surround sound even when the surround left

and right speakers are not used. The surround speakers can

then be used as front speakers to provide extra power.

To turn on the Virtual Surround function, set the TSS-15 to

Standby, and then set the VIRTUAL switch on the rear

panel to ON.

Note:

The Virtual Surround function can be turned on or off only

when the TSS-15 is on Standby. Setting the VIRTUAL

switch while the TSS-15 is on will have no effect.

Boosting the Front Speaker Volume

In Virtual Surround mode, the surround left and right

speakers can be used in addition to the front left and right

speakers to provide extra power. In this mode, the front left

and surround left speakers output the same sound. Like-

wise, the front right and surround right speakers output the

same sound.

When using the surround speakers as front speakers, you

can adjust their positions to optimize the sound dispersion.

Note:

The test tone can be used with the Virtual Surround func-

tion to adjust the level of each speaker (see page 13). The

level of the surround speakers cannot be adjusted indepen-

dently of the front speakers.

■ Energy Saving Function

The TSS-15 has an energy saving function. If it’s left on

and no controls are operated for 24 hours, it will automati-

cally switch to Standby mode.

FRONT

SPEAKER

OUTPUTS

DC IN 15V

SURROUND

DIGITAL

OFF

INPUT

VIRTUAL

ANALOG

CENTER

SUBWOOFER

VIRTUAL switch

Rear panel

TSS-15

Subwoofer

Front left &

surround left

speakers

Front right &

surround right

speakers

English

If the TSS-15 Home Theater Sound System does not work properly, refer to the table below. If the problem is not listed,

or if the suggested remedy fails to resolve the problem, set the TSS-15 to Standby, disconnect the power cable from the

wall outlet, and contact your Yamaha dealer.

Troubleshooting

Problem Possible cause Remedy

Refer to

page

The TSS-15 turns itself off

as soon as it’s turned on.

The power cable is not connected

properly.

Make sure that the power cable is properly

connected to a suitable wall outlet.

A speaker cord has a short circuit so

the ampliﬁer protection system has

turned the TSS-15 off automatically.

Make sure that all speaker cords are

properly connected and check for any

shorts.

The TSS-15 ampliﬁer was exposed to

a strong external electrical shock,

such as lightning or excessive static

electricity.

Set the TSS-15 to Standby, and then

disconnect the power cable from the wall

outlet. Wait about 30 seconds, plug the

power cable in again, and then turn on the

TSS-15.

—

The TSS-15 has been used at high

volume levels and the ampliﬁer

protection system has turned the

TSS-15 off automatically.

Use the TSS-15 at a lower volume. 12

The TSS-15 ampliﬁer is excessively

hot and the protection system has

turned it off automatically.

Wait a few minutes for the ampliﬁer to cool

down.

—

No sound can be heard.

Connections are incomplete.

Make sure that the speakers and other

components are properly connected.

9–10

The wrong input is selected.

Select the appropriate input.

If the DTS indicator is ﬂashing, select

another input, then select the previous

input.

The volume is set too low. Turn up the volume. 12

The TSS-15 has been muted.

Press the [MUTE] button to unmute the

TSS-15.

One speaker outputs no

sound.

The speaker is not connected

properly.

Check the speaker connections. 9

Only the front speakers

output sound.

The Auto listening mode is selected

and the audio source is stereo.

To use all speakers, select a Cinema DSP or

Dolby Pro Logic II listening mode.

14–15

The Dolby Surround, Dolby Digital,

or DTS source does not include

surround channel information.

Digital audio signals with a sampling

rate above 48 kHz are output by only

the front speakers.

——

The center speaker outputs

no sound.

The center speaker’s volume level is

set to minimum.

Use the remote control’s SP LEVEL

CENTER Up [+] button to increase the

level.

Some multichannel sources do not

include center channel information.

——

The surround speakers

output no sound.

The surround speakers’ volume level

is set to minimum.

Use the remote control’s SP LEVEL SURR

Up [+] button to increase the level.

The subwoofer outputs no

sound.

The subwoofer’s volume level is set to

minimum.

Use the remote control’s SP LEVEL SW

Up [+] button to increase the level.

Some source material does not

include sub-bass sounds.

——

The source is Dolby Digital

and the Auto listening

mode is selected, but the

center and surround

speakers output no sound.

The Dolby Digital signal contains

only two channels.

If the DVD being played has a 5.1-channel

soundtrack, select it on the DVD player.

If not, you can still use all speakers by

selecting the Dolby Pro Logic II Movie or

Music listening mode.

The source is Dolby Digital

or DTS, but the Dolby

Digital or DTS indicator

doesn’t light up.

The DVD player is not set correctly.

Make sure that the DVD player is

conﬁgured to output Dolby Digital and

DTS (bitstream) signals from its digital

output. Refer to its manual for details.

—

A humming noise can be

heard.

An audio cable is not connected

properly.

Check all audio connections and correct as

necessary.

Noise can be heard.

The level of the input signal is too

low.

Increase the output level on the source

component.

—

An audio cable is not connected

properly.

Check all audio connections and correct as

necessary.

The sound is distorted.

The level of the input signal is too

high.

Reduce the output level on the source

component.

—

The TSS-15 doesn’t work

properly.

The internal microprocessor has

locked up due to external electrical

shock (lightning or excessive static

electricity) or a drop in the power

supply voltage.

Disconnect the power cable from the wall

outlet, wait for about 30 seconds, then plug

it back in again.

—

Noise can be heard when

the TSS-15 ampliﬁer is

situated close to another

electronic device.

The electronic device’s high-

frequency circuits are causing

interference on the TSS-15 ampliﬁer.

Move the TSS-15 ampliﬁer and electronic

device away from each other.

—

The remote control doesn’t

work.

The battery is depleted.

Replace with a new CR2025 battery.

1. Using a small screwdriver, carefully

slide out the battery holder.

2. Remove the expired battery, and place

the new battery onto the battery holder

with the + side facing up.

3. Slide the battery holder into the remote

control, and push it so that it clicks shut.

• Do not attempt to recharge the old battery.

• Dispose of the old battery in accordance

with local regulations.

—

You’re too far away from the TSS-15.

The remote control has a maximum

working range of 6 meters (20 feet), and a

working angle of 30 degrees.

Direct sunlight or lighting (inverter-

type ﬂuorescent light, etc) is shining

on the TSS-15’s remote control

sensor.

Reposition the TSS-15 ampliﬁer. —

Problem Possible cause Remedy

Refer to

page

+ side up

La page charge ...

Yamaha 15 Le manuel du propriétaire

Marque: Yamaha

Modèle: 15

Catégorie: Récepteurs AV

Taper: Le manuel du propriétaire

Ce manuel convient également à

TSS-15

Télécharger le PDF

rapport

dans d''autres langues

italiano: Yamaha 15 Manuale del proprietario
English: Yamaha 15 Owner's manual
español: Yamaha 15 El manual del propietario
Deutsch: Yamaha 15 Bedienungsanleitung
русский: Yamaha 15 Инструкция по применению
Nederlands: Yamaha 15 de handleiding
português: Yamaha 15 Manual do proprietário
dansk: Yamaha 15 Brugervejledning
polski: Yamaha 15 Instrukcja obsługi
čeština: Yamaha 15 Návod k obsluze
svenska: Yamaha 15 Bruksanvisning
Türkçe: Yamaha 15 El kitabı
suomi: Yamaha 15 Omistajan opas
română: Yamaha 15 Manualul proprietarului

Yamaha 15 Le manuel du propriétaire

Ce manuel convient également à

Yamaha 15 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents