Lenco SB-040 85cm Soundbar Manuel utilisateur

Catégorie
Haut-parleurs de la barre de son
Taper
Manuel utilisateur

Ce manuel convient également à

Model SB-040
User manual 85CM soundbar with 40W RMS, Bluetooth and HDMI (ARC)
Gebruikshandleiding 85CM soundbar met 40W RMS,
Bluetooth en HDMI (ARC)
Bedienungsanleitung 85-cm-Soundbar mit 40 W RMS, Bluetooth und
HDMI (ARC)
Mode d’emploi – Barre son 85CM avec 40 W RMS,
Bluetooth et HDMI (ARC)
Manual de usuario barra de sonido 85CM con 40W RMS, Bluetooth y
HDMI (ARC)
1
Inhoud
English .............................. Fout! Bladwijzer niet gedefinieerd.
Nederlands ............................................................................ 18
Deutsch ................................................................................. 37
Français ................................................................................. 57
Español .................................................................................. 76
Versie: 3.0
2
English
CAUTION:
Usage of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
1. Do not cover or block any ventilation openings. When
placing the device on a shelf, leave
5 cm (2”) free space around the whole device.
2. Install in accordance with the supplied user manual.
3. Keep the device away from heat sources such as
radiators, heaters, stoves, candles and other
heat-generating products or naked flame. The device
can only be used in moderate climates. Extremely cold
or warm environments should be avoided. Working
temperature between 0° and 35°C.
4. Avoid using the device near strong magnetic fields.
5. Electrostatic discharge can disturb normal usage of this
device. If so, simply reset and restart the device
following the instruction manual. During file
transmission, please handle with care and operate in a
static-free environment.
6. Warning! Never insert an object into the product
through the vents or openings. High voltage flows
through the product and inserting an object can cause
electric shock and/or short circuit internal parts. For the
3
same reason, do not spill water or liquid on the
product.
7. Do not use in wet or moist areas such as bathrooms,
steamy kitchens or near swimming pools.
8. The device shall not be exposed to dripping or splashing
and make sure that no objects filled with liquids, such
as vases, are placed on or near the apparatus.
9. Do not use this device when condensation may occur.
When the unit is used in a warm wet room with damp,
water droplets or condensation may occur inside the
unit and the unit may not function properly; let the unit
stand in power OFF for 1 or 2 hours before turning on
the power: the unit should be dry before getting any
power.
10. Although this device is manufactured with the utmost
care and checked several times before leaving the
factory, it is still possible that problems may occur, as
with all electrical appliances. If you notice smoke, an
excessive build-up of heat or any other unexpected
phenomena, you should disconnect the plug from the
main power socket immediately.
11. This device must operate on a power source as
specified on the specification label. If you are not sure
of the type of power supply used in your home, consult
your dealer or local power company.
12. Keep away from animals. Some animals enjoy biting on
power cords.
13. To clean the device, use a soft dry cloth. Do not use
solvents or petrol based fluids.
4
To remove severe stains, you may use a damp cloth
with dilute detergent.
14. The supplier is not responsible for damage or lost data
caused by malfunction, misuse, modification of the
device or battery replacement.
15. Do not interrupt the connection when the device is
formatting or transferring files. Otherwise, data may be
corrupted or lost.
16. If the unit has USB playback function, the USB memory
stick should be plugged into the unit directly. Don’t use
an USB extension cable because it can cause
interference resulting in failing of data.
17. The rating label has been marked on the bottom or
back panel of the device.
18. This device is not intended for use by people (including
children) with physical, sensory or mental disabilities, or
a lack of experience and knowledge, unless they’re
under supervision or have received instructions about
the correct use of the device by the person who is
responsible for their safety.
19. This product is intended for non professional use only
and not for commercial or industrial use.
20. Make sure the unit is adjusted to a stable position.
Damage caused by using this product in an unstable
position vibrations or shocks or by failure to follow any
other warning or precaution contained within this user
manual will not be covered by warranty.
21. Never remove the casing of this device.
22. Never place this device on other electrical equipment.
23. Do not allow children access to plastic bags.
5
24. Only use attachments/accessories specified by the
manufacturer.
25. Refer all servicing to qualified service personnel.
Servicing is required when the device has been
damaged in any way, such as the power supply cord or
the plug, when liquid has been spilled or objects have
fallen into the device, when the device has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
26. Long exposure to loud sounds from personal music
players may lead to temporary or permanent hearing
loss.
27. If the product is delivered with power cable or AC
power adaptor:
If any trouble occur, disconnect the AC power
cord and refer servicing to qualified personnel.
Don’t step on or pinch the power adaptor. Be
very careful, particularly near the plugs and the
cable’s exit point. Do not place heavy items on
the power adaptor, which may damage it. Keep
the entire device out of children’s reach! When
playing with the power cable, they can seriously
injure themselves.
Unplug this device during lightning storms or
when unused for a long period.
The socket outlet must be installed near the
equipment and must be easily accessible.
Do not overload ac outlets or extension cords.
Overloading can cause fire or electric shock.
6
Devices with class 1 construction should be
connected to a main socket outlet with a
protective earthed connection.
Devices with class 2 construction do not require a
earthed connection.
Always hold the plug when pulling it out of the
main supply socket. Do not pull the power cord.
This can cause a short circuit.
Do not use a damaged power cord or plug or a
loose outlet. Doing so may result in fire or electric
shock.
28. If the product contains or is delivered with a remote
control containing coin/cell batteries:
Warning:
“Do not ingest battery, Chemical Burn Hazard” or
equivalent working.
[The remote control supplied with] This product
contains a coin/button cell battery. If the battery
is swallowed, it can cause severe internal burns in
just
2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close
securely, stop using the product and keep it away
from children.
If you think batteries might have been swallowed
or placed inside any part of the body, seek
immediate medical attention.
29. Caution about the use of Batteries:
7
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
Battery cannot be subjected to high or low
extreme temperatures, low air pressure at high
altitude during use, storage or transportation.
Replacement of a battery with an incorrect type
that can result in an explosion or the leakage of
flammable liquid or gas.
Disposal of a battery into fire or a hot oven, or
mechanically crushing or cutting of a battery, that
can result in an explosion.
Leaving a battery in an extremely high
temperature surrounding environment that can
result in an explosion or that leakage of
flammable liquid or gas.
A battery subjected to extremely low air pressure
that may result in an explosion or the leakage of
flammable liquid or gas.
Attention should be drawn to the environmental
aspects of battery disposal.
INSTALLATION
Unpack all parts and remove protective material.
Do not connect the unit to the mains before checking the
mains voltage and before all other connections have
been made.
8
Warning about use of HDMI cable connection.
-Use only a HIGH SPEED HDMI cable (from HDMI 1.4)
-Check if your TV has a HDMI connector with “ARC”
mentioned.
If yes, please connect the HDMI cable with this connector.
If not, then it is not sure that the sound synchronization of
volume of your soundbar will work perfectly.
In the HDMI settings of your TV, please select the CEC-HDMI
option (or ANYNET for some brands)
Overview
Product
1: /SOURCE: Short press to
power on when off, after power
on short press for function
change, long press to standby;
2: VOL+: Short or long press for volume up;
3: VOL-: Short or long press for volume down;
4: PAIR: Short or long press Bluetooth pair;
5: LINE IN;
6: AUX IN (L/R);
7: DC IN;
8: HDMI IN;
9
Function indicator LED
1: Red light: When the power supply indicates standby, it is
long bright, and extinguishes after the power is turned
on;
2: Orange LED light; LINE IN function used
3: White LED light; HDMI function is used
4: Green LED light: AUX in mode;
5: Blue light: Bluetooth function used (Blue light flash when
Bluetooth is not connected; Blue LED long bright after
Bluetooth connection);
Remote
1: : Short press to on or standby;
2: : Short press to Bluetooth mode; long press to
Bluetooth pair;
3: LINE IN: Press to LINE IN mode;
4: MUSIC: Press to Music sound effect
5: MOVIE: Press to cinema sound effect; In Movie mode,
Bass and Treble adjustments are not working;
6: TREBLE+: Press to treble effect up
7: TREBLE: Press to treble effect down
10
8: : Press to jump previous song in Bluetooth mode, and
Short press to mute off when mute on;
9: : Press to play or pause music in Bluetooth mode, and
Short press to mute off when mute on;
10: MUTE: Press to mute on or off
11: AUX IN: Press to AUX IN mode;
12: HDMI: Press to HDMI mode;
13: DIALOG: Press to speech sound effect;
14: BASS+: Press to bass effect up, and Short press to mute
off when mute on;
15: VOL+: Short or long press to volume up and Short press
to mute off when mute on;
16: VOL-: Short or long press to volume down, and Short
press to mute off when mute on;
17: BASS: Press to bass effect down, and Short press to
mute off when mute on;
18: : Press to jump next song in Bluetooth mode, and Short
press to mute off when mute on;
Operation
Install the Remote Control:
The Remote Control has a pre-installed lithium CR2025
battery. Remove the protective tab to activate the Remote
Control battery.
Note: The Remote Control works within a range of 6 meter.
11
Remote Batteries
Remote control: requires 1 CR2025 button cell type battery
(included).
Get Started:
1: Make sure you have made all the necessary cable
connections before connecting the Soundbar to a wall
outlet, the soundbar will enter to standby mode, the
indicator will light up in red.
2: Short press /SOURCE on unit or on remote
control to turn on the soundbar. The indicator of the last
used mode will light up.
3: Press the source button on unit or Remote Control to
choose various source. The color of the indicator light
will change as per selection.
Note: The Soundbar will re-enter the Standby Mode
again if there is no operation for 15 minutes.
Bluetooth Pairing:
1: Press the Bluetooth button on the Remote control to
enter the Bluetooth mode. You can also short press the
Source button on the Soundbar to choose the Bluetooth
Source.
2: The indicator light will flash in blue.
12
3: Turn on the Bluetooth function on your devices and the
device will start to search for the Soundbar.
4: Select Lenco SB-040” from the list of found devices.
5: If asked, enter the password “0000 and press OK.
6: When successfully paired with your device, the indicator
light will be lit steadily.
Note: The Bluetooth playback is controlled by your
device and the buttons on the remote control.
Note: The operation range for the Bluetooth connection
is 10 meters.
Note: If a mobile phone on which you are playing music
receives a call, the music will be interrupted and not
played. After call end, the devices are connected to each
other again and playback continues.
7: Press and hold the Bluetooth button on the Remote
Control for 3 seconds to disconnect the Bluetooth
pairing.
AUX Source:
1: Ensure that the soundbar is connected to the TV or
other audio device via an AUX cable.
2: Press the AUX button on the Remote control to enter
the mode. You can also short press the source button on
the soundbar to choose the AUX source.
3: The indicator light will lit in green.
Note: The playback is controlled by your device and by
the button on the remote control.
LINE IN Source:
1: Ensure that the soundbar is connected to the TV or
other audio device via an audio cable.
2: Press the LINE IN button on the remote control to enter
the mode. You can also short press the source button on
the soundbar to choose the LINE IN source.
3: The indicator light will lit in orange.
Note: The playback is controlled by your device and by
the buttons on the remote control.
13
HDMI Source
1: Ensure that the soundbar is connected to the TV or
other audio device via HDMI cables.
2: Press the HDMI button on the remote.
3: The indicator light will lit in white.
Note: The device can synchronize the volume with the
TV, and also with the switch.
Trouble shooting
Troubles
Solutions
Pairing
connection via
Bluetooth
cannot be
completed
Other mobile device has connected before
use and the mobile device has not left as
well as its Bluetooth is not off. When it
connects, Bluetooth of this device will
automatically find the Bluetooth device
and connect. First, turn off Bluetooth of the
connected Bluetooth devices, then the next
Bluetooth device can be found and
normally paired to connect.
Volume of
playback via
Bluetooth is
small
After connections with mobile devices,
volume of Bluetooth device is not up but at
the default output level. Turn on the
mobile device output.
Output volume of Bluetooth device is low
itself.
Connection
distance via
Bluetooth is
short
Obstruction exists between mobile devices
and Bluetooth device. Remove
obstructions.
Connection via
Bluetooth
right,
sometimes
Obstruction exists between mobile devices
and Bluetooth device. Remove
obstructions.
Too far away from Bluetooth device to
connected mobile devices, beyond the
connection range.
14
Shorten the distance between the
Bluetooth device and mobile devices.
Silent play after
connection via
Bluetooth
After connections with mobile devices,
Bluetooth device audio is off. Turn on the
mobile’s output volume.
Specifications
Product name
Lenco SB-040
Output power
20W*2
AC/DC adaptor
100-240V~50/60Hz
Speaker frequency
50Hz-15KHz
Bluetooth version
4.0, A2DP, AVRCP
Bluetooth range
Up to 10m
Included in the packaging
Soundbar, Remote control,
AC/DC adapter, RCA cable,
User manual
Dimensions
850*60*60mm
Weight
1.75KG
Power supply adaptor (For EU only)
Manufacturer: Jiedong Electron Factory
Model number: JDA0301402000DM2
Use only the power supply listed in the user instructions
15
This product specifications and design are subject to change
without notice!
1.GUARANTEE
Lenco offers service and warranty in accordance to European
law, which means that in case of repairs (both during and
after the warranty period) you should contact your local
dealer.
Important note: It is not possible to send products that need
repairs to Lenco directly.
Important note: If this unit is opened or accessed by a
non-offcial service center in any way, the warranty expires.
This device is not suitable for professional use. In case of
professional use, all warranty obligations of the manufacturer
will be voided.
2. DISCLAIMER
16
Updates to Firmware and/or hardware components are made
regularly. Therefore some of the instruction, specifications
and pictures in this documentation may differ slightly from
your particular situation. All items described in this guide for
illustration purposes only and may not apply to particular
situation. No legal right or entitlements may be obtained
from the description made in this manual.
3. DISPOSAL OF THE OLD DEVICE
This symbol indicates that the relevant
electrical product or battery should not be
disposed of as general household waste in
Europe. To ensure the correct waste
treatment of the product and battery, please
dispose them in accordance to any applicable
local laws of requirement for disposal of
electrical equipment or batteries. In so doing,
you will help to conserve natural resources
and improve standards of environmental
protection in treatment and disposal of
electrical waste (Waste Electrical and
Electronic Equipment Directive).
17
4. CE Marking
Hereby, Lenco Benelux B.V., Thermiekstraat 1a, 6361
HB Nuth, The Netherlands, declares that this product is in
compliance with the essential EU directive requirements.
The declaration of conformity may be consulted via
techdoc@commaxxgroup.com
5. Service
For more information and
helpdesk support, please visit www.lenco.com
Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth,
The Netherlands.
18
Nederlands
SB-040
LET OP:
Het gebruik van afstandsbedieningen of aanpassingen of de
uitvoering van procedures die niet in dit document zijn
gespecificeerd, kan leiden tot gevaarlijke blootstelling aan
straling.
VOORZORGSMAATREGELEN VOOR GEBRUIK
ONTHOUD DE VOLGENDE INSTRUCTIES:
1. Bedek of blokkeer de ventilatieopeningen niet. Wanneer
u het apparaat op een schap plaatst, dient u 5 cm (2”)
vrije ruimte rondom het gehele apparaat te behouden.
2. Installeer het product volgens de meegeleverde
gebruikershandleiding.
3. Houd het apparaat uit de buurt van hittebronnen, zoals
radiatoren, verwarmingen, kachels, kaarsen en andere
hittegenererende producten of open vuur. Het
apparaat kan alleen worden gebruikt in een gematigd
klimaat. Extreem koude of warme omgevingen dienen
te worden vermeden. Het bedrijfstemperatuurbereik
ligt tussen 0 °C en 35 °C.
4. Gebruik dit apparaat niet in de buurt van krachtige
magnetische velden.
5. Elektrostatische ontlading kan normaal gebruik van dit
apparaat verstoren. U hoeft het apparaat in dit geval
slechts te resetten en opnieuw op te starten volgens de
gebruikershandleiding. Wees voorzichtig tijdens
bestandsoverdracht en gebruik het product in een
omgeving zonder statische interferentie.
19
6. Waarschuwing! Steek nooit een voorwerp via de
ventilatie- of andere openingen in het product. Er is
hoogspanning in het product aanwezig en als u er een
object insteekt, kan dat een elektrische schok
veroorzaken en/of kortsluiting in de interne onderdelen.
Mors om dezelfde reden geen water of vloeistof op het
product.
7. Gebruik het toestel niet in vochtige ruimtes, zoals
badkamers, stomende keukens of in de buurt van
zwembaden.
8. Het apparaat mag niet worden blootgesteld aan
druppels en spetters en zorg ervoor dat er geen met
vloeistof gevulde voorwerpen, zoals vazen, op of in de
buurt van het apparaat worden geplaatst.
9. Gebruik dit apparaat niet wanneer condensatie kan
optreden. Wanneer het apparaat in een warme, natte
ruimte wordt gebruikt, kunnen zich waterdruppels of
condens vormen in het apparaat en kan het apparaat
niet goed functioneren. Laat het apparaat 1 of 2 uur uit
staan voordat u het inschakelt: het apparaat dient
droog te zijn voordat deze stroom ontvangt.
10. Alhoewel dit apparaat met grote zorg gefabriceerd en
verschillende keren geïnspecteerd is voordat het de
fabriek verlaat, is het nog steeds mogelijk dat er
problemen optreden, zoals met alle elektrische
apparaten. Als u rook, een overmatige
hitteontwikkeling of enig ander onverwacht verschijnsel
opmerkt, moet u onmiddellijk de stekker van het
netsnoer uit het stopcontact halen.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95

Lenco SB-040 85cm Soundbar Manuel utilisateur

Catégorie
Haut-parleurs de la barre de son
Taper
Manuel utilisateur
Ce manuel convient également à