Sony DCR-PC330E Le manuel du propriétaire

Catégorie
Caméscopes
Taper
Le manuel du propriétaire
3-084-864-13(1)
© 2003 Sony Corporation
C
a
m
e
r
a
O
p
e
r
a
t
i
o
n
s
G
u
i
d
e
[
G
B
]
/
M
o
d
e
d
e
m
p
l
o
i
d
u
c
a
m
é
s
c
o
p
e
[
F
R
]
Camera
Operations Guide
Mode d’emploi du
caméscope
Read this first
Lire ce mode d’emploi en premier
GB
FR
Digital Video Camera Recorder
DCR-PC330E
SERIES
TM
2
Read this first
Before operating the unit, please read this
manual thoroughly, and retain it for future
reference.
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open
the cabinet. Refer servicing to qualified
personnel only.
“Memory Stick”
FOR CUSTOMERS IN THE UNITED
KINGDOM
NOTICE ON THE SUPPLIED AC
ADAPTOR
A moulded plug complying with BS1363 is fitted to
this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be
replaced, a fuse of the same rating as the supplied one
and approved by ASTA or BSI to BS1362 (i.e.,
marked with or mark) must be used.
If the plug supplied with this equipment has a
detachable fuse cover, be sure to attach the fuse cover
after you change the fuse. Never use the plug without
the fuse cover. If you should lose the fuse cover, please
contact your nearest Sony service station.
FOR CUSTOMERS IN EUROPE
ATTENTION
The electromagnetic fields at the specific frequencies
may influence the picture and sound of this camcorder.
This product has been tested and found compliant with
the limits set out in the EMC Directive for using
connection cables shorter than 3 meters (9.8 feet).
b
Note
If static electricity or electromagnetic interference
causes data transfer to discontinue midway (fail),
restart the application or disconnect and connect the
USB cable again.
Notes on use
Note on Cassette Memory
Your camcorder is based on the DV format. You can
use only mini DV cassettes in your camcorder. Use of
mini DV cassettes with Cassette Memory is
recommended as you can use Title search (p. 54), Date
search (p. 55), [ TITLE] (p. 74), [ TAPE
TITLE] (p. 76).
Cassettes with Cassette Memory are marked
with .
Notes on recording
Before starting to record, test the recording function
to make sure the picture and sound are recorded
without any problems.
Compensation for the contents of recordings cannot
be provided, even if recording or playback is not
possible due to a malfunction of the camcorder,
storage media, etc.
TV color systems differ depending on the country/
regions. To view your recordings on a TV, you need
a PAL system-based TV.
Television programs, films, video tapes, and other
materials may be copyrighted. Unauthorized
recording of such materials may be contrary to the
copyright laws.
N-50
3
GB
Notes on the LCD panel, viewfinder, and
lens
The LCD screen and the viewfinder are
manufactured using extremely high-precision
technology, so over 99.99% of the pixels are
operational for effective use.
However, there may be some tiny black points and/
or bright points (white, red, blue, or green in color)
that appear constantly on the LCD screen and the
viewfinder.
These points are normal results of the manufacturing
process and do not affect the recording in any way.
Exposing the LCD screen, the viewfinder, or the lens
to direct sunlight for long periods of time may cause
malfunctions. Be careful when placing the camera
near a window or outdoors.
Do not aim at the sun. Doing so might cause your
camcorder to malfunction. Take pictures of the sun
only in low light conditions, such as at dusk.
Note on connecting other device
Before connecting your camcorder to other device
such as a VCR or a computer with a USB or i.LINK
cable, be sure to insert the connector plug in the proper
direction. If you insert the connector plug forcibly in
the wrong direction, the terminal may be damaged, or
this may cause a malfunction of your camcorder.
Note on using this manual
The images of the LCD screen and the viewfinder used
on this manual are captured using a digital still camera,
and thus may appear different from what you see.
Notes on using the camcorder
Hold your camcorder correctly.
To ensure a good grip, lower the finger rest and
fasten the grip belt as shown in the following
illustration.
When you are using the touch panel, place your hand
on the back side of the LCD panel to support it.
Then, touch the buttons displayed on the screen.
You can change the language to be used for screen
display on your camcorder (p. 22).
Do not hold the camcorder by the following parts.
Touch the button on the LCD screen.
Viewfinder
LCD panel
Battery pack
Flash
4
Read this first............................................................................................. 2
Quick Start Guide
Recording movies on a tape ...................................................................... 8
Recording still images on a “Memory Stick”............................................. 10
Getting started
Step 1: Checking supplied items.............................................................. 12
Step 2: Charging the battery pack............................................................ 13
Using an outside power source .................................................................................16
Step 3: Turning the power on................................................................... 16
Step 4: Adjusting the LCD panel and viewfinder...................................... 17
Adjusting the LCD panel ............................................................................................17
Adjusting the viewfinder .............................................................................................17
Step 5: Setting the date and time............................................................. 18
Step 6: Inserting the recording media...................................................... 20
Inserting a cassette tape ...........................................................................................20
Inserting a “Memory Stick” .........................................................................................21
Step 7: Setting the screen language........................................................ 22
Recording
Recording movies .................................................................................... 23
Recording for a longer time .......................................................................................25
Using zoom ................................................................................................................25
Recording in mirror mode ..........................................................................................26
Using the self-timer ....................................................................................................26
Recording movies fit for breaking into still images
– Progressive recording mode ............................................................................27
Recording still images – Memory photo recording............................. 28
Selecting image quality or size ..................................................................................29
Using the flash ...........................................................................................................30
Using the self-timer ....................................................................................................31
Recording a still image on a “Memory Stick” while recording movies on a tape .......32
Adjusting the exposure............................................................................. 32
Adjusting the exposure for backlit subjects ...............................................................32
Fixing the exposure for the selected subject – Flexible spot meter ...........................33
Adjusting the exposure manually ...............................................................................33
: Features available for tape only.
: Features available for “Memory Stick”
only.
Table of Contents
5
Recording in dark places – NightShot, etc............................................... 34
Adjusting the focus................................................................................... 35
Adjusting the focus for an off-center subject – SPOT FOCUS .................................. 35
Adjusting the focus manually .................................................................................... 36
Using supplementary light to focus on a still image – HOLOGRAM AF ............. 37
Adjusting the frame and focus when recording a still image in darkness
– NightFraming ................................................................................................... 38
Recording a picture using various effects ................................................ 38
Fading in and out of a scene – FADER .............................................................. 38
Using special effects – Digital effect .................................................................. 40
Overlaying still images on movies on a tape – MEMORY MIX ................................. 41
Searching for the starting point .......................................................... 43
Searching for the last scene of the most recent recording – END SEARCH ............43
Searching manually – EDIT SEARCH ...................................................................... 44
Reviewing the most recently recorded scenes – Rec review .................................... 44
Playback
Viewing movies recorded on a tape ................................................... 45
Playing back in various modes ................................................................................. 46
Viewing recordings with added effects – Digital effect .............................................. 47
Viewing recordings on a “Memory Stick” ........................................... 48
Playing back in various modes from a “Memory Stick” ............................................. 49
Various playback functions ...................................................................... 50
Magnifying pictures – Tape playback zoom/Memory playback zoom ....................... 50
Displaying the screen indicators ............................................................................... 51
Displaying the date/time and camera settings data – Data code .............................. 51
Playing the picture on a TV...................................................................... 53
Locating a scene on a tape for playback ........................................... 54
Searching quickly for a desired scene – Zero set memory ....................................... 54
Searching for a scene using Cassette Memory – Title search .................................. 54
Searching for a scene by date of recording – Date search ....................................... 55
,continued
6
Advanced operations
Using the Menu
Selecting menu items ........................56
Using the (CAMERA SET) menu
– PROGRAM AE/WHITE BAL./16:9
WIDE, etc. ....................................58
Using the (MEMORY SET) menu
– BURST/QUALITY/IMAGE SIZE/
ALL ERASE/NEW FOLDER, etc. .64
Using the (PICT. APPLI.) menu
– PICT. EFFECT/SLIDE SHOW/
FRAME REC/SMTH INT. REC,
etc. ...............................................68
Using the (EDIT/PLAY) menu
– TITLE/TAPE TITLE/SEARCH,
etc. ...............................................73
Using the (STANDARD SET) menu
– REC MODE/MULTI-SOUND/
AUDIO MIX/USB-CAMERA, etc. .77
Using the (TIME/LANGU.) menu
– CLOCK SET/WORLD TIME,
etc. ...............................................82
Customizing Personal Menu ..............83
Dubbing/Editing
Connecting to a VCR or TV ...............86
Dubbing to another tape ..............87
Recording pictures from a VCR
or TV ............................................87
Dubbing pictures from a tape to a
“Memory Stick” .............................89
Dubbing still images from a “Memory
Stick” to a tape .............................90
Dubbing selected scenes from a tape
– Digital program editing ..............91
Dubbing sound to a recorded
tape ........................................97
Deleting recorded pictures ...........99
Changing the image size
– Resize .....................................100
Marking recorded images with specific
information – Image protection/
Print mark ...................................101
7
Troubleshooting
Troubleshooting ...............................103
Warning indicators and messages ...111
Additional Information
Using your camcorder abroad ..........115
Usable cassette tapes .....................116
About the “Memory Stick ................117
About the “InfoLITHIUM” battery
pack ............................................119
About i.LINK .....................................121
Maintenance and precautions ..........122
Specification ....................................125
Quick Reference
Identifying parts and controls ...........127
Index ................................................134
Refer also to other operating instructions
supplied with your camcorder:
Editing images with your computer
cComputer Applications Guide
Quick Start Guide
8
Quick Start Guide
Recording movies on a tape
1 Attach the charged battery pack to the camcorder.
To charge the battery, see page 13.
2 Insert a cassette into the camcorder.
a Slide the battery release lever and
remove the battery terminal cover.
b Slide the battery pack in the direction
of the arrow until it clicks.
a Slide the OPEN/
ZEJECT lever in
the direction of the
arrow to open the lid.
The cassette compartment
comes out automatically.
b Insert the cassette with
its window-side facing
up, then push the center
of the back of the
cassette.
c Press .
Close the cassette lid after
the cassette compartment
slides back in by itself.
OPEN/ZEJECT lever
Window-side
Battery release lever
Quick Start Guide
Quick Start Guide
9
3 Start recording while checking the subject on the LCD screen.
The date and time is not set up in the default setting. To set the date and time, see page 18.
4 View the recorded picture on the LCD screen.
a Remove the lens cap.
b Press OPEN and
open the LCD panel.
c While pressing the
green button, slide
the POWER switch
down to light up the
CAMERA-TAPE lamp.
The power turns on.
d Press START/STOP.
Recording starts. To
change to standby mode,
press START/STOP again.
a Slide the POWER
switch repeatedly
until the PLAY/EDIT
lamp lights up.
b Touch (rewind).
c Touch (play) to
start the playback.
To stop, press .
To turn off the power, slide the
POWER switch up to (CHG)
OFF.
Quick Start Guide
10
Recording still images on a “Memory
Stick”
1 Attach the charged battery pack to the camcorder.
To charge the battery, see page 13.
2 Insert a “Memory Stick” into the camcorder.
a Slide the battery release lever and
remove the battery terminal cover.
b Slide the battery pack in the direction
of the arrow until it clicks.
Insert it so that the b mark
is at the bottom left corner.
Push in until it clicks.
Battery release lever
b mark
Quick Start Guide
Quick Start Guide
11
3 Start recording while checking the subject on the LCD screen.
The date and time is not set up in the default setting. To set the date and time, see page 18.
4 View the recorded picture on the LCD screen.
a Remove the lens cap.
b Press OPEN and
open the LCD panel.
c While pressing the
green button, slide
the POWER switch
repeatedly until the
CAMERA-MEMORY
lamp lights up.
The power turns on.
d Press PHOTO lightly.
A short beep sound is heard
when the focus is adjusted.
e Press PHOTO fully.
A shutter sound is heard
and the still image is
recorded.
a Slide the POWER
switch repeatedly
until the PLAY/EDIT
lamp lights up.
b Touch .
The most recently recorded
image is displayed.
c Touch (next) or
(previous) to
view images in
sequence.
To turn off the power, slide the
POWER switch up to (CHG)
OFF.
Getting started
12
Getting started
Step 1: Checking
supplied items
Make sure you have following items supplied
with your camcorder.
The number in parentheses indicates the number
of that item supplied.
“Memory Stick” 16MB (1)
AC Adaptor (1)
Mains lead (1)
Lens cap (Large, 1)
Attached to the camcorder.
Lens hood (1) and Lens cap (Small, 1)
Use the lens hood to record under strong light, such as
under the sun. When you use the lens hood, use the
small lens cap. See page 127 on how to replace the
lens cap. Note when you use a filter (optional), the
shadow of the lens hood may appear on the screen.
Also, if you force the lens hood on, you may not be
able to remove it again.
Wireless Remote Commander (1)
A button-type lithium battery is already
installed.
A/V connecting cable (1)
USB cable (1)
Rechargeable battery pack NP-FM30 (1)
Battery terminal cover (1)
CD-ROM “SPVD-010 USB Driver” (1)
Cleaning cloth (1)
21-pin adaptor (1)
For the models with the mark printed on their
bottom surfaces only.
Camera Operations Guide (This manual)
(1)
Computer Applications Guide (1)
Getting started
Getting started
13
Step 2: Charging the
battery pack
You can charge the battery by attaching the
“InfoLITHIUM” battery pack (M series)
to your camcorder.
b Notes
You cannot use batteries other than the
“InfoLITHIUM” battery pack (M series) (p. 119).
Do not short-circuit the DC plug of the AC Adaptor
with any metallic objects. This may cause a
malfunction.
Use a nearby wall socket when using the AC
Adaptor. Disconnect the AC Adaptor from the wall
socket immediately if any malfunction occurs.
1 Slide the battery release lever and
remove the battery terminal cover.
2 Attach the battery pack by sliding it in
the direction of the arrow until it
clicks.
3 With the b mark on the DC plug
facing the jack cover, connect the AC
Adaptor to the DC IN jack on your
camcorder.
4 Connect the mains lead to the AC
Adaptor.
5 Connect the mains lead to the wall
socket.
To the wall socket
DC plug
DC IN jack
Mains lead
AC Adaptor
Battery
Battey release lever
b mark
,continued
Getting started
14
6 Slide the POWER switch up to (CHG)
OFF.
The CHG (charge) lamp lights up and
charging starts.
After charging the battery
The CHG (charge) lamp turns off when the
battery is fully charged. Disconnect the AC
Adaptor from the DC IN jack.
To remove the battery pack
1
Set the POWER switch to (CHG) OFF.
2 Slide the battery release lever and slide
the battery pack out.
b After removing the battery pack
Always attach the terminal cover to protect the
battery terminal. If you do not use the battery pack
for a long time, use up the battery pack completely
before storing it. See page 120 about storage of the
battey pack.
To check the remaining battery – Battery
Info
You can check the battery’s current charge level
and its current remaining recording time both
during charging or when the power is turned off.
1 Set the POWER switch to (CHG) OFF.
2 Press OPEN and open the LCD panel.
3 Press DISPLAY/BATT INFO.
The battery information appears for about 7
seconds.
Keep the button pressed to view it for about
20 seconds.
A Battery charge level: Displays
approximate remaining amount of
power left in the battery pack.
B Possible recording time using the LCD
panel.
C Possible recording time using the
viewfinder.
Battery release
lever
POWER
switch
POWER switch
OPEN
DISPLAY/BATT INFO
Getting started
Getting started
15
Charging time
Approximate number of minutes required when
you fully charge a fully discharged battery pack
at 25°C (77°F). (10 – 30°C (50 – 86°F)
recommended.)
Recording time when recording with the
LCD screen on
Approximate number of minutes available
when you use a fully charged battery pack at
25°C (77°F).
With the LCD BACKLIGHT switch set to
ON
With the LCD BACKLIGHT switch set to
OFF
Recording time when recording with the
viewfinder
Approximate number of minutes available
when you use a fully charged battery pack at
25°C (77°F).
* Approximate number of minutes when recording
while you repeatedly record, start/stop, slide the
POWER switch to change the power mode, and
zoom. The actual battery life may be shorter.
Playing time
Approximate number of minutes available
when you use a fully charged battery pack at
25°C (77°F).
* With the LCD BACKLIGHT switch set to ON.
b Notes
The power will not be supplied from the battery pack
when the AC Adaptor is connected to the DC IN jack
of your camcorder, even if its mains lead is
disconnected from the wall socket.
The recording and playback time will be shorter
when you use your camcorder in low temperature.
The CHG (charge) lamp flashes during charging, or
the battery information will not be correctly
displayed in following conditions.
Battery pack
NP-FM30 (supplied) 145
NP-FM50 150
NP-FM70 240
NP-QM71/QM71D 260
NP-FM91/QM91/
QM91D
360
Battery pack Continuous
recording
time
Typical*
recording
time
NP-FM30
(supplied)
80 45
NP-FM50 135 75
NP-FM70 275 155
NP-QM71/
QM71D
325 185
NP-FM91/
QM91/QM91D
490 280
Battery pack Continuous
recording
time
Typical*
recording
time
NP-FM30
(supplied)
95 55
NP-FM50 155 85
NP-FM70 320 180
NP-QM71/
QM71D
375 215
NP-FM91/
QM91/QM91D
565 320
Battery pack Continuous
recording
time
Typical*
recording
time
NP-FM30
(supplied)
95 55
NP-FM50 155 85
NP-FM70 320 180
NP-QM71/
QM71D
375 215
NP-FM91/
QM91/QM91D
565 320
Battery pack LCD panel
opened*
LCD panel
closed
NP-FM30
(supplied)
120 150
NP-FM50 195 240
NP-FM70 400 495
NP-QM71/
QM71D
465 580
NP-FM91/
QM91/QM91D
695 865
,continued
Getting started
16
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is fully discharged. (For Battery
information only.)
Using an outside power source
You can use the AC Adaptor as the power
source when you do not want the battery to
run out. While you are using the AC Adaptor,
the battery pack will not lose its charge even
when it is attached to your camcorder.
PRECAUTION
Even if your camcorder is turned off, AC power
(mains) is still supplied to it while connected to
the wall socket via the AC Adaptor.
Connect your camcorder as shown in
“Charging the battery pack” (p. 13).
Step 3: Turning the
power on
You need to slide the POWER switch
repeatedly to select the desired power mode
to record or play.
When using this camcorder for the first time,
the [CLOCK SET] screen appears (p. 18).
While pressing the green button, slide the
POWER switch down.
The power turns on.
To enter the recording or playing mode, slide
the switch repeatedly until the respective lamp
for the desired power mode lights up.
CAMERA-TAPE mode: To record on a tape.
CAMERA-MEMORY mode: To record on a
“Memory Stick.”
PLAY/EDIT mode: To play or edit pictures on
a tape or “Memory Stick.”
To turn off the power
Slide the POWER switch up to (CHG) OFF.
Getting started
Getting started
17
Step 4: Adjusting the
LCD panel and
viewfinder
Adjusting the LCD panel
You can adjust the angle and brightness of
the LCD panel to meet various recording
situations.
Even when there are obstructions between you
and the subject, you can check the subject on the
LCD screen during recording by adjusting the
angle of the LCD panel.
Open the LCD panel 90 degrees to the
camcorder, then rotate it to the desired
position.
To adjust the brightness of the LCD
screen
1
Touch .
2 Touch [LCD BRIGHT].
If the item is not displayed on the screen,
touch / . If you cannot find it, touch
[MENU], (STANDARD SET) menu,
then touch [LCD/VF SET] (p. 78).
3 Adjust the item with / , then
touch .
z Tips
If you rotate the LCD panel 180 degrees to the lens
side, you can close the LCD panel with the LCD
screen facing out.
If you are using the battery pack for power source,
you can adjust the brightness by selecting [LCD BL
LEVEL] from the [LCD/VF SET] on the
(STANDARD SET) menu
(p. 78).
When you use your camcorder in bright conditions
using the battery pack, set the LCD BACKLIGHT
switch to OFF ( appears). This position saves
battery power.
You can turn off the operation confirmation beep by
setting [BEEP] in the (STANDARD SET)
menu to [OFF]
(p. 81).
Adjusting the viewfinder
You can view images using the viewfinder
when you close the LCD panel. Use the
viewfinder when the battery is running out, or
when the screen is hard to see.
1 Extend the viewfinder.
2 Adjust the viewfinder lens adjustment
lever until the picture is clear.
Press OPEN and open the LCD panel.
Maximum
180 degrees
Maximum
90 degrees
LCD BACKLIGHT switch
Viewfinder lens adjustment lever
,continued
Getting started
18
To use the viewfinder during operation
When you are recording on a tape or a “Memory
Stick,” you can adjust the exposure (p. 32) and
fader (p. 38) while checking the image on the
viewfinder. Have the LCD panel rotated 180
degrees and closed with the screen facing out.
1 Set the power mode to CAMERA-TAPE
or CAMERA-MEMORY (p. 16).
2 Extend the viewfinder, and close the
LCD panel with the screen facing out.
appears on the screen.
3 Touch .
4 Touch [YES].
The LCD screen is turned off.
5 Touch the LCD screen while checking
the display in the viewfinder.
[EXPOSURE], etc. are displayed.
6 Touch the button you want to set.
[EXPOSURE]: Adjust with /
and touch .
[FADER]: Touch it repeatedly to select a
desired effect (only in the CAMERA-
TAPE mode).
: The LCD screen lights up.
To hide the buttons on the LCD screen,
touch .
z Tip
To adjust the brightness of the viewfinder backlight,
select (STANDARD SET) menu, [LCD/VF
SET], then [VF B.LIGHT] (when you are using the
battery pack, p. 78).
Step 5: Setting the
date and time
Set the date and time when using this
camcorder for the first time. If you do not set
the date and time, the [CLOCK SET] screen
appears every time you turn on your
camcorder.
b Note
If you do not use your camcorder for about 3
months, the built-in rechargeable button-type
battery gets discharged and the date and time
settings may be cleared from the memory. In that
case, charge the rechargeable button-type battery
(p. 124) and then set the date and time again.
1 Turn on your camcorder (p. 16).
2 Press OPEN and open the LCD panel.
Proceed to step 7 when you set the clock for
the first time.
OPEN
POWER switch
Getting started
Getting started
19
3 Touch .
4 Touch [MENU].
5 Select (TIME/LANGU.) with
/ , then touch .
6 Select [CLOCK SET] with / ,
then touch .
7 Set [Y] (year) with / , then touch
.
You can set any year up to the year 2079.
8 Set [M] (month), [D] (day), hour and
minute in the same way as was done in
step 7, then touch .
Getting started
20
Step 6: Inserting the
recording media
Inserting a cassette tape
You can use mini DV cassettes only.
For details on these cassettes (such as write-
protection), see page 116.
b Note
Do not force the cassette into the compartment. This
may cause a malfunction of your camcorder.
1 Slide the OPEN/ZEJECT lever in
the direction of the arrow and open the
lid.
The cassette compartment automatically
comes out and opens up.
2 Insert a cassette with its window-side
facing up.
3 Press .
The cassette compartment automatically
slides back in.
4 Close the lid.
To eject the cassette
1
Slide the OPEN/ZEJECT lever in the
direction of the arrow and open the lid.
The cassette compartment automatically
comes out.
2 Take out the cassette, then press .
The cassette compartment automatically
slides back in.
3 Close the lid.
Lid
OPEN/ZEJECT lever
Window-side
Push the center of the
back of the cassette
lightly.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284

Sony DCR-PC330E Le manuel du propriétaire

Catégorie
Caméscopes
Taper
Le manuel du propriétaire

dans d''autres langues