Haier HW24WF10NG Manuel utilisateur

Catégorie
Boissons glacées
Taper
Manuel utilisateur

Ce manuel convient également à

Quality
Innovation
Style
Wine Cellar
Rafraîchisseur à Vin
Enfriador de Vin
User Manual
HW24WF10NG, HW42WF10NG
Guide de l’Utilisateur
Manual del Usuario Modelo
(HW24WF10NG)
HW24WF10NG, HW42WF10NG
HW24WF10NG, HW42WF10NG
1
English
IMPORTANT SAFEGUARDS
When using this appliance, always exercise basic safety
precautions, including the following:
1. Read all of the instructions before using this appliance.
2. Use this appliance only for its intended purpose as described in this
use and care guide.
3. This wine cellar must be properly installed in accordance with the
installation instructions before it is used. See grounding instructions in
the installation section.
4. Never unplug your wine cellar by pulling on the power cord. Always
grasp the plug firmly and pull straight out from the outlet.
5. Unplug your wine cellar before cleaning or before making any
repairs. Note: If for any reason this product requires service, we
strongly recommend that a certified technician performs the service.
6. Repair or replace immediately, all electric power cords that have
become frayed or otherwise damaged. Do not use a cord that shows
cracks or abrasion damage along its length, the plug or the connector
end.
7. This wine cellar should not be recessed or built-in an enclosed
cabinet. It is designed for freestanding installation only.
8. If your old wine cellar is not being used, we recommend that you
remove the door and leave the shelves in place. This will reduce
possibility of danger to children.
9. Do not operate your wine cellar in the presence of explosive fumes.
10. Do not store foods in wine cellar as interior temperature may
not be cool enough to prevent spoilage or may cause bacteria growth.
SAVE THESE INSTRUCTIONS
2
English
Thank you for using our Haier
product. This easy-to-use manual
will guide you in getting the best
use of your wine cellar.
Remember to record the model and
serial number. They are on a label
in back of the wine
cellar.
Model number
Serial number
Date of purchase
Staple your receipt to your manual. You will need it to obtain
warranty service.
DANGER
Risk of child entrapment. Before you throw away your old wine
cellar, take off the doors. Leave the shelves in place so that
children may not easily climb inside.
Table Of Contents
PAGE
Safety Precautions......................................................................................1
Parts And Features ....................................................................................4
Installing Your Wine Cellar ..........................................................................5
Unpacking Your Wine Cellar ................................................................5
Leveling Your Wine Cellar ....................................................................5
Proper Air Circulation............................................................................5
Electrical Requirements..........................................................................6
Install Limitations ..................................................................................6
Use of Extension Cord ..........................................................................6
Wine Cellar
Features And Use ............................................................................7
Initial Set Up ........................................................................................7
Temperature Adjustment........................................................................7
Shelving ..............................................................................................9
Interior Light ........................................................................................9
Door Lock ............................................................................................9
Normal Operating Sounds ....................................................................9
Proper Wine Cellar Care and Cleaning............................................................10
Cleaning and Maintenance..................................................................10
Power Interruptions..............................................................................11
Vacation and Moving Care ..................................................................11
Troubleshooting ......................................................................................12
Warranty Information ................................................................................13
English
3
Parts And Features
1.
2.
White Wine Button (-)
3.
Red Wine Button (+)
4.
Set Button
5.
LED Temperature Display
6.
Door Lock and Key
7.
Door Handle
8.
9.
Adjustable Leveling Legs
5 Slid e - Out Shelves-
HW24WF10NG
8 Slid e - Out Shelves-
HW42WF10NG
Interior Light
English
4
Set
Red
White
TEMPERATURE
Down
Up
Electronic Control Unit
(HW24WF10NG)
(Storage capacity vary by mode)
1. Remove all packaging material. This includes the foam base and all
adhesive tape holding the wine cellar accessories inside and
outside.
2. Inspect and remove any remains of packing, tape or printed
materials before powering on the wine cellar.
• Your wine cellar has two leveling legs which are located in the
front corners of your wine cellar. After properly placing your
wine cellar in its final position, you can level your wine cellar.
• Leveling legs can be adjusted by turning them clockwise to raise your
wine cellar or by turning them counterclockwise to lower
your wine cellar. The wine cellar door will close easier when the
leveling legs are extended.
• To assure your wine cellar works at the maximum efficiency it
was designed for, you should install it in a location where there
is proper air circulation, plumbing and electrical connections.
• The following are recommended clearances around the wine cellar:
Sides……………2 "(50mm)
Top....................2" (50mm)
Back..................2" (50mm)
• Do not over fill your wine cellar for proper internal air circulation.
Installing Your Wine Cellar
Unpacking Your Wine Cellar
Proper Air Circulation
Leveling Your Wine Cellar
5
English
English
Electrical Requirement
• Make sure there is a suitable power Outlet (115 volts, 15 amps
outlet) with proper grounding to power the wine cellar.
• Avoid the use of three plug adapters or cutting off the third grounding
in order to accommodate a two plug outlet. This is a dangerous
practice since it provides no effective grounding for the wine cellar
and may result in shock hazard.
• Do not install your wine cellar in any location not properly insulated
or heated e.g. garage etc. Your wine cellar was not designed to
operate in temperature settings below 55˚ Fahrenheit.
• Select a suitable location for the wine cellar on a hard even
surface away from direct sunlight or heat source e.g. radiators,
baseboard heaters, cooking appliances etc. Any floor unevenness
should be corrected with the leveling legs located on the front and
rear bottom corners of the wine cellar.
• Your wine cellar is designed for free-standing installation only. It is
not designed for built-in application.
• Avoid the use of an extension cord because of potential safety
hazards under certain conditions. If it is necessary to use an extension
cord, use only a 3-wire extension cord that has a 3-blade grounding
plug and a 3-slot outlet that will accept the plug. The marked rating
of the extension cord must be equal to or greater than the electrical
rating of the appliance.
Install Limitations
6
Use of Extension Cord
Wine Cellar Features And Use
Electronic Controlled Units:
Once you have plugged the unit into an electrical outlet, let the unit run
for at least 30 minutes to acclimate itself before making any adjust-
ments. During this time the Red Wine light may stay on.
7
Initial Setup
Electronic Control Unit: See fig. # 1
• The wine cellar is preset from the factory to automatically
accommodate temperature requirements for red or white wines.
If you store mostly white wines, press the "White Wine" button and the
wine cellar will maintain an average temperature between
45˚ to 50˚ F . Pushing the "Red Wine" button will yield an
average temperature between 55˚ to 60˚ F.
• The wine cellar can be set to any temperature you desire to
accommodate your wine storage requirements. To set the
temperature, press both the "White Wine" and "Red Wine" buttons
simultaneously and hold for approximately 3 seconds. Now you are
in temperature set mode. Decrease the temperature by pushing the
"White Wine" button and increase the temperature by pressing the
"Red Wine" button. Pressing the appropriate button 3 times will
adjust the temperature 3 degrees, press 4 times equals 4 degrees, 5
times equals 5 degrees, and so on. Once you have selected the
temperature you desire, push the "Light/Set" button. Now the wine
cellar is programmed and the LED readout will return to current
internal temperature reading .
Temperature Adjustments:
English
• There will be approximately a 3 degree variance +/- between the
temperature you select and the temperature indicated on the LED
readout.
This occurs because the wine cellar activates and deactivates
trying to maintain your desired temperature. There is often a
variance between the top and bottom shelves of the wine cellar.
Therefore, if you have set the wine cellar for 50˚ and have a
mix of red and white wines, you may want to put the white wine
on the bottom shelf where the temperature will be cooler , and place
the red wine on the top shelf where the temperature will be warmer.
8
English
fig. # 1
Set
Red
White
TEMPERATURE
Down
Up
9
• The shelves are designed for flexibility and easy cleaning.
To accommodate different sized bottles the shelves slide out
and can be moved up or down into any of the tracks molded
into the cellar cabinet. Larger bottles or Magnums can be more easily
accommodated on the shelves of the bottom of the cellar.
You will notice that the shelves are designed so the bottles do
not line-up directly over one another. This allows free air
movement and provides more space.
• To complement the look of your wine collection, a soft light has been
built into the wine cellar. Light comes on when doors is opened and
goes off when doors is closed.
Shelving
Interior Light
• For safety and security, your wine cellar is equipped with a door lock.
To eliminate the risk of accidental child entrapment, the lock was
designed so that the door will not lock until the key is removed
• Boiling water, gurgling sounds or slight vibrations that are the result
of the refrigerant circulating through the cooling coils.
• The thermostat control will click when it cycles on and off .
Door Lock
Normal Operating Sounds You May Hear
English
NOTE:There is a 5 seconds delay after the light shuts off.
Warning: To avoid electric shock always unplug your
wine cellar before cleaning. Ignoring this warning may
result in death or injury.
Caution: Before using cleaning products, always read and
follow manufacturer’s instructions and warnings to avoid
personal injury or product damage.
General:
• Prepare a cleaning solution of 3-4 tablespoons of
baking soda mixed with warm water. Use sponge or
soft cloth, dampened with the cleaning solution, to
wipe down your wine cellar.
• Rinse with clean warm water and dry with a soft
cloth.
• Do not use harsh chemicals, abrasives, ammonia,
chlorine bleach,concentrated detergents, solvents or
metal scouring pads. SOME of these chemicals may
dissolve, damage and/or discolor your wine cellar.
• Clean door gaskets every three months according to
general instructions. Gaskets must be kept clean and
pliable to assure a proper seal.
• Petroleum jelly applied lightly on the hinge side of
gaskets will keep the gasket pliable and assure a
good seal.
Proper Wine Cellar Care and Cleaning
Cleaning and Maintenance
Door Gaskets:
10
English
• Occasionally there may be power interruptions due to
thunderstorms or other causes. Remove the power cord from AC out-
let when a power outage occurs. When power has been restored,
replug power cord to AC outlet.
• For long vacations or absences, unplug the wine cooler and clean the
wine cellar and door gaskets according to "General cleaning" section.
Prop doors open, so air can circulate inside. When moving always
move the wine cellar vertically. Do not move with the unit lying down.
Possible damage to the sealed system could occur.
Power Interruptions
Vacation and Moving Care
11
English
Wine Cellar Does Not Operate
• Check if wine cellar is plugged in.
• Check if there is power at the ac outlet, by checking the
circuit breaker.
Wine appears too warm
• Frequent door openings.
• Allow time for recently added wine to reach desired temperature.
• Check gaskets for proper seal.
• Clean condenser coils.
• Adjust temperature control to colder setting.
Wine temperature is too cold
• If temperature control setting is too cold, adjust to a warmer setting.
Wine cellar runs too frequently
• This may be normal to maintain constant temperature during
high temperature and humid days.
• Doors may have been opened frequently or for an extended
period of time.
• Clean condenser coils.
• Check gasket for proper seal.
• Check to see if doors are completely closed.
Moisture build up on interior or exterior
of the wine cellar:
• This is normal during high humidity periods.
• Prolonged or frequent door openings.
• Check door gaskets for proper seal.
Wine Cellar door does not shut properly:
• Level the wine cellar.
• Check for blockages e.g. wine bottles, shelves.
TroubleShooting
12
English
Limited Warranty
What is covered and for how long?
This warranty covers all defects in
workmanship or materials for a period
of:
12 months labor
12 months parts
5 years sealed system
The warranty commences on the date
the item was purchased and the origi-
nal purchase receipt must be presented
to the authorized service center before
warranty repairs are rendered.
EXCEPTIONS: Commercial or Rental Use
warranty
90 days labor (carry-in only)
90 days parts
No other warranty applies
What is covered.
1. The mechanical and electrical parts,
which serve as a functional, purpose
of this appliance for a period of 12
months. This includes all parts
except finish, and trim.
2. The components of the sealed sys-
tem e.g. hermetic compressor, con-
denser and evaporator from manu-
facturing defects for a period of 5
years from the date of purchase.
Any damages to such components
caused by mechanical abuse or
improper handling or shipping will
not be covered.
What will be done?
1. We will repair or replace, at our dis-
cretion any mechanical or electrical
part which proves to be defective in
normal usage during the warranty
period so specified.
2. There will be no charge to the
purchaser for parts and labor on
any covered items during the initial
12month period. Beyond this period
only parts are covered in the
remaining warranty. Labor is not
provided and must be paid by the
customer.
3. Contact your nearest authorized
service center. For the name of the
nearest service center please call
1-877-337-3639
THIS WARRANTY COVERS APPLIANCES WITHIN
THE CONTINENTAL UNITED STATES, PUERTO RICO
AND CANADA. IT DOES NOT COVER THE
FOLLOWING:
Damages from improper installation.
Damages in shipping.
Defects other than manufacturing.
Damage from misuse, abuse, accident,
alteration, lack of proper care and
maintenance or incorrect current or
voltage.
Damage from other than household
use.
Damage from service by other than an
authorized dealer or service center.
Decorative trims or replaceable
light bulbs.
Transportation and shipping.
Labor (after the initial 12 months).
THIS LIMITED WARRANTY IS GIVEN IN
LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR, INCLUDING THE
WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR
PURPOSE
The remedy provided in this warranty is
exclusive and is granted in lieu of all
other remedies.
This warranty does not cover incidental
or consequential damages, so the
above limitations may not apply to
you. Some States do not allow limita-
tions on how long an implied warranty
lasts, so the above limitations may not
apply to you.
This warranty gives you specific legal
rights, and you may have other rights,
which vary, from state to state.
Haier America
New York, NY 10018
English
13
Français
1
CONSIGNES DE SÉCURITÉ
IMPORTANTES
Lorsque vous utilisez cet appareil, veuillez respecter les
consignes de sécurité de base y compris les suivantes:
1. Lisez toutes les instructions avant d’utiliser cet appareil.
2. Utilisez cet équipement uniquement pour l'usage auquel il est destiné
comme indiqué dans ce manuel d’utilisation et d’entretien.
3. Cette cave à vin doit être installée correctement et conformément aux
instructions d'installation avant toute utilisation. Consultez les instruc-
tions de mise à la masse du chapitre consacré à l'installation pour de
plus amples détails.
4. Ne débranchez jamais cet appareil en tirant sur le cordon d'alimenta-
tion. Saisissez fermement la fiche et tirez tout droit sur cette dernière.
5. Débranchez votre cave à vin avant de la nettoyer ou avant d’effectuer
toute réparation. Remarque: Si pour une raison quelconque cet
appareil doit être réparé, il est vivement recommandé que la répara-
tion soit effectuée par un réparateur agréé.
6. Réparez ou remplacez immédiatement tout cordon ou câble électrique
effiloché ou endommagé. Veillez à ne pas utiliser un câble présentant
des craquelures ou des abrasions au niveau du cordon, de la fiche ou
de l'extrémité du connecteur.
7. Cette cave à vin ne doit pas être placée en retrait ou encastrée à l'in-
térieur d'une cavité ou d’une armoire. Cet appareil est sensé être
placé tout seul et sans support.
8. Si vous n’utilisez plus votre ancienne cave à vin, nous vous recomman-
dons de retirer la porte et de laisser les étagères en place. Cela
réduira les risques d’accident pour les enfants.
9. N’utilisez pas votre cave à vin en présence de vapeurs et d’émana-
tions explosives.
10. Ne rangez pas d’aliments dans votre cave à vin car la température à
l’intérieur risque de ne pas être suffisamment froide pour éviter que les
aliments deviennent avariés et risquent de provoquer la prolifération
de bactéries.
CONSERVEZ CES INSTRUCTIONS
Français
2
DANGER
Cet équipement présente un risque d'enfermement pour les
enfants. Avant de vous débarrasser de votre cave à vin, veuillez
enlever les portes. Laissez les étagères en place afin que les
enfants ne puissent pas grimper à l’intérieur.
Merci d’avoir fait l’achat de cet
équipement Haier. Cette notice
facile à consulter vous aidera à
utiliser au mieux votre cave à vin.
N’oubliez pas d’enregistrer les
numéros de modèle et de série. Ils
se trouvent sur une étiquette à l’ar-
rière de la cave à vin.
Numéro de modèle
Numéro de série
Date d’achat
Veuillez agrafer votre facture avec votre manuel. Vous en aurez besoin
pour bénéficier de la garantie.
3
Sommaire
PAGE
Mesures de Sécuriteé ..................................................................................1
Pièces et Caractéristiques ............................................................................4
Installation du Réfrigératuer á Vin ..................................................................5
Désemballage du Réfrigérateur á Vin ....................................................5
Réglage du Réfrigérateur á Vin..............................................................5
Circulation d’Air Adéquate ....................................................................5
Caractéristiques Electriques ..................................................................5
Installez Les Limitations ........................................................................5
Utilisation de corde d'extension..............................................................5
Caractéristques du Réfrigérateur á Vin
................................................................7
Montage Initial ....................................................................................7
Ajustements de Température..................................................................7
Tablettes ..............................................................................................9
Lumière Intèrieure ................................................................................9
Serrure de porte ..................................................................................9
Bruits de Fonctionnement lors d'une Exploitation Normale ......................9
Entretien et Nettoyage du Réfrigérateur á Vin
......................................................10
Nettoyage et Maintenance ..................................................................10
Coupures de Courant..........................................................................11
Entretien lors des Vacances ou d'un Déménagement ............................11
Guide de Dépannage
....................................................................................12
Garantie................................................................................................14
Français
4
Piéces et Caractéristiques
Français
1.
2.
Bouton pour le Vin Blanc (-)
3.
Bouton pour le Vin Rouge (+)
4.
Bouton de Lumière Intérieure (set)
5.
Afficheur de Lumière à Incandescence
6.
Door Lock and ey
9.
Béquille de porte
7. Jambes de Mise à Niveau Réglables
8.
5 Clayettes Amovibles-HW24WF10NG
8 Clayettes Amovibles-HW42WF10NG
Lumière Intèrieure
(HW24WF10NG)
(les dispositifs peuvent changer par modèle)
Set
Red
White
TEMPERATURE
Down
Up
Commande Electrique
5
1. Retirer l’ensemble du matériel d’emballage. Ceci comprend la base
en mousse ainsi que l’ensemble du matériel adhésif qui maintient les
accessoires du réfrigérateur à vin l'intérieur tout comme à l’extérieur.
2. Inspecter et enlever tout restant d’emballage, de scotch ou de
matériaux imprimés avant de brancher le réfrigérateur à vin.
• Votre refroidisseur de vin a deux jambes de mise à niveau qui sont
plac dans les coins avant de votre refroidisseur de vin.
• Pour régler les pieds de mise à niveau, les tourner dans le sens des
aiguilles d’une montre afin de surélever le réfrigérateur á vin et dans
le sens inverse des aiguilles d’une montre pour l’abaisser. La porte du
réfrigérateur á vin se ferme plus facilement lorsque les pieds de mise
à niveau sont surélevés.
• Pour être sûr que le réfrigérateur á vin fonctionne à son
maximum d'efficacité, l'installer dans un environnement
favorable à une bonne circulation d'air et possédant des
connexions de plomberie et d’électricité saines.
• Les indications suivantes concernent l’espace recommandé autour du
réfrigérateur á vin:
Latéralement...................50mm (2")
Partie supérieure.............50mm (2")
Arrière...........................50 mm (2")
• Ne remplissez pas au-dessus du niveau votre refroidisseur de vin
pour le circulaton interne approprié d'air.
Installation du Réfrigérateur á Vin
Désemballage du Réfrigérateur á Vin
Réglage du Réfrigérateur á Vin
Circulation d’Air Adéquate
Français
6
• Pour l’alimentation du réfrigérateur á vin, veiller à utiliser
une prise de courant convenable (prise de 115 volts,15 amp)
raccordée à la terre.
• Eviter d’utiliser des adaptateurs à trois fiches ou de sectionner la
troisième fiche reliée à la terre dans le but d’utiliser un branchement
à deux fiches. Cette pratique pourrait s’avérer dangereuse
dans la mesure où le réfrigérateur á vin n’est pas relié convenable-
ment à la terre, et risquerait de causer des risques d’électrocution.
• Ne pas installer le réfrigérateur á vin dans un endroit qui n’est pas
convenablement isolé ou chauffé ; comme par exemple un garage,
etc. Le réfrigérateur á vin n’est pas conçu pour fonctionner à des
températures inférieures à 12°C.
• Choisir un endroit convenable et placer le réfrigérateur á vin sur une
surface solide et plane, loin de sources de chaleur telles que:
les radiateurs, les éléments chauffants à plinthes, les cuisinières, etc.
N'importe quelle inégalité de plancher devrait être corrigée avec
les jambes de mise à niveau plac sur les coins plan et arrière de
votre refroidisseur de vin.
• Votre refroidisseur de vin est conçu pour l'installation debout libre
seulement Il OS non conçu pour le bult dans l'application.
• Évitez d’utiliser une rallonge électrique car, dans certains cas, cela
peut entraîner des risques pour la santé. S'il est indispensable d'utilis-
er un cordon d'extension, utilisez une rallonge à trois conducteurs dis-
posant d’une fiche mâle à trois broches avec mise à la masse et
branchez-la sur une prise femelle susceptible d’accepter la fiche. Le
calibre défini du cordon d'extension doit être égal ou supérieur à
celui de l'équipement.
Caractéristiques Electriques
Limitations relatives à l’Installation
Français
Utilisation de rallonges
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42

Haier HW24WF10NG Manuel utilisateur

Catégorie
Boissons glacées
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues