Samsung PS50A566 Manuel utilisateur

Catégorie
Téléviseurs LCD
Taper
Manuel utilisateur
imagine the possibilities
Plasma TV
user manual
Thank you for purchasing this Samsung product.
To receive more complete service, please register your
product at
www.samsung.com/global/register
Model Serial No.
English - 2
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
User Instructions
Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the
plasma monitor panel for more than 2 hours as it can cause screen image retention. This image
retention is also known as “screen burn”. To avoid such image retention, reduce the degree of
brightness and contrast of the screen when displaying a still image.
Height
The PDP can normally operate only under 2000m in height. It might abnormally function at a place
over 2000m in height so do not install and operate there.
Heat on the top of the PDP TV
The top side of the product may be hot after long period of use as heat dissipates from the panel
through the vent hole in the upper part of the product. This is normal and does not indicate any defect
or operation failure of the product. However, children should be prevented from touching the upper
part of the product.
The product is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding
environment such as temperature or humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require
sophisticated technology to produce. However, there may be few bright or dark pixels on the screen.
These pixels will have no impact on the performance of the product.
Avoid operating the TV at temperatures below 5°C(41°F)
A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the PDP TV in 4:3 format for a long period of time may leave traces
of borders displayed on the left, right and centre of the screen caused by the
difference of light emission on the screen. Playing a DVD or a game console
may cause similar effect to the screen. Damages caused by the above effect are
not covered by the Warranty.
Afterimage on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may
produce partial afterimages. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when
displaying still images.
Warranty
- Warranty does not cover any damage caused by image retention.
- Burn-in is not covered by the warranty.
Installation
Be sure to contact an authorized service centre, when installing your set in a location with heavy
dust, high or low temperatures, high humidity, chemical substance and where it operates continually
such as the airport, the train station etc. Failure to do so may cause a serious damage to your set.
Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2)
digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive
DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with
the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be
available in some countries.
English - 3
Symbols
¯
Press
Important
Note
Contents
General Information
User Instructions ............................................. 2
Checking Parts ................................................ 4
Using the Stand-Base ..................................... 4
Control Panel ................................................. 5
Connection Panel ............................................ 6
Viewing the Remote Control ........................... 8
Operation
Switching Your Television On and Off ............. 9
Viewing the Menus .......................................... 9
Plug & Play Feature ......................................10
Using the TOOLS Button .............................. 12
Viewing External Signal Sources ..................12
Editing Device Names ................................... 13
Channel Control
Storing Channels Automatically .................... 14
Storing Channels Manually ........................... 15
Viewing the EPG (Electronic Programme
Guide) Information ....................................... 16
Viewing All Channels .................................... 17
Erasing and Adding Channels ....................... 18
Setting Your Favourite Channels ..................19
Reserving a Program (Time Viewing) ........... 20
Confirming a Viewing Reservation ................ 21
Assigning Names to Channels ...................... 22
Sorting the Stored Channels - Analogue ....... 23
Selecting and Deselecting All Channels ....... 24
Storing Channels in Memory (Auto Store) .... 24
Setting the Channel Mode ............................ 24
Locking Channels ......................................... 25
Fine Tuning Analogue Channels ................... 25
Viewing Signal Information ........................... 26
LNA (Low Noise Amplifier) ............................ 26
Picture Control
Changing the Picture Standard ..................... 27
Customizing the Picture Settings ..................27
Configuring Detailed Settings on the Picture 28
Picture Options ............................................. 29
Resetting the Picture Settings to the Factory
Defaults ......................................................... 31
Sound Control
Sound Features ............................................ 32
Selecting the Sound Mode
(depending on the model) .............................34
Connecting Headphones (Sold separately) .. 34
Function Description
Time Features ............................................... 35
Language / Change PIN / Parental Lock /
Subtitle / Teletext Language / Preference /
Light Effect / Melody/ Entertainment /
Energy Saving / PIP ..................................... 36
Upgrading the Software ................................ 39
Common Interface ........................................ 40
PC Display
Setting up Your PC Software
(Based on Windows XP) ...............................41
Input Mode (PC) ............................................ 42
Setting the PC ............................................... 43
WISELINK
Using the WISELINK Function ...................... 45
Using the Photo List ...................................... 46
Viewing a Photo or Slide Show ..................... 52
Using the Music List ...................................... 56
Playing a Music File ...................................... 61
Using the Setup Menu .................................. 63
About Anynet
+
What is Anynet
+
? .......................................... 64
Connecting Anynet
+
Devices ........................ 64
Setting Up Anynet+ ....................................... 65
Scanning and Switching between
Anynet
+
Devices ........................................... 65
Recording ...................................................... 66
Listening through a Receiver ........................ 67
Check Points before Requesting Service ..... 67
Appendix
Teletext Feature (depending on the model) .. 68
Wall Mount Kit Specifications (VESA) ........... 70
Auto Wall - mount adjustment
(Sold separately) ........................................... 71
How to assemble the Stand-Base
(depending on the model) ............................. 72
Securing the TV to the Wall .......................... 73
Troubleshooting ............................................ 74
Specifications ................................................ 75
English
English - 4
Checking Parts
Owner’s Instructions Remote Control/
AAA Batteries
Power Cord Cloth-Clean Warranty Card/
Safety Guide Manual
(Not available in all
locations)
Cover-Bottom / Screws (2ea)
(Refer to page 71)
Ferrite Core for
Power Cord
Ferrite Core for
S-Video
Ferrite Core for
Component
Sold Separately
Antenna Cable Component Cables Audio Cables PC Cable
Scart Cable PC Audio Cable HDMI Cable HDMI/DVI Cable
¯
Ferrite Core (Power Cord, S-Video, Component)
The ferrite cores are used to shield the cables from interference.
When connecting a cable, open the ferrite core and clip it around
the cable near the plug.
Using the Stand-Base
¯
Two or more people
should carry the PDP.
Never lay the PDP on the
floor because of possible
damage to the screen.
Always keep the PDP
upright.
The PDP can rotate 20
degrees in right and left
directions.
-20° ~ 20°
English - 5
Control Panel
1
SOURCE
Toggles between all the available input sources
(TV, Ext.1, Ext.2, AV, S-Video, Component, PC,
HDMI1, HDMI2/DVI, HDMI3, USB).
¯
In the on-screen menu, use this button as
you would use the
ENTER button on the
remote control.
2
MENU
Press to see an on-screen menu of your TV’s
features.
3
+
Press to increase or decrease the volume. In
the on-screen menu, use the
+ buttons
as you would use the
and buttons on the
remote control.
4
Press to change channels.
In the on-screen menu, use the
buttons as you would use the
and buttons
on the remote control.
5
Power Indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
6
POWER
Press to turn the TV on and off.
7
Remote Control Sensor
Aim the remote control towards this spot on the
TV.
8
Speakers
¯
The product colour and shape may vary depending on the model.
Front Panel
English - 6
Connection Panel
Continued...
Whenever you connect an audio or video system to your set, ensure that all elements are
switched off.
When connecting an external device, match the colour of the connection terminal to the cable.
1
POWER IN
Connect the supplied power cord.
2
COMPONENT IN
Audio (AUDIO L/R) and video (Y/P
B/PR) inputs
for Component.
3
PC IN(PC) / AUDIO
Connect to the video and audio output jack on
your PC.
4
EXT 1, EXT 2
Inputs or outputs for external devices, such as
VCR, DVD, video game device or video disc
players.
Input/Output Specification
Connector
Input Output
Video Audio(L/R) RGB Video + Audio(L/R)
EXT 1
Only TV or DTV
output is available.
EXT 2
Output you can
choose.
5
DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio Component.
6
AUDIO OUT(AUDIO R/L)
Connect RCA audio signals from the TV to an
external source, such as Audio equipment.
7
SERVICE
Connector for service.
Connect the serial jack between the
electro-motion wall mount bracket and your
TV when you want to adjust the TV viewing
angle using your remote control.
Rear Panel
¯
The product colour and shape may vary depending on the model.
Cable Television
Network
or
or
1
432685
9
7
English - 7
8
HDMI IN 1,2
- No additional Audio connection is needed
for an HDMI to HDMI connection.
- When using an HDMI/DVI cable connection,
you must use the HDMI IN 2 jack.
¯
What is HDMI?
- “High Definition Multimedia interface”
allows the transmission of high definition
digital video data and multiple channels
of digital audio.
- The HDMI/DVI terminal supports DVI
connection to an extended device with
the appropriate cable (not supplied). The
difference between HDMI and DVI is that
the HDMI device is smaller in size, has
the HDCP (High Bandwidth Digital Copy
Protection) coding feature installed, and
supports multi - channel digital audio.
DVI IN(HDMI2) AUDIO L/R
DVI audio outputs for external devices.
9
ANT IN
75Ω Coaxial connector for Aerial/Cable
Network.
Supported modes for HDMI/DVI and Component
480i 480p 576i 576p 720p
1080i
1080p
HDMI/DVI 50Hz
XXXOO
O
O
HDMI/DVI 60Hz
XOXXO
O
O
Component O O O O O
O
O
1
COMMON INTERFACE Slot
Insert CI (Common Interface) card into the slot.
(refer to page 40)
When ‘CI Card’ isn’t inserted in some
channels, “Scramble Signal” is displayed on
the screen.
The pairing information containing a
telephone number, CI CARD ID, Host
ID,and other information will be displayed
in about 2~3 minutes. If an error message
is displayed, please contact your service
provider.
When the channel information configuration
has finished, the message “Updating
Completed” is displayed, indicating that the
channel list is now updated.
¯ Insert the CI-Card in the direction marked
on it.
2
HDMI IN 3
Connect to the HDMI jack of a device with
HDMI output.
3
WISELINK
Connect a USB mass storage device to view
photo files (JPEG) and play audio files (MP3).
4
S-VIDEO or VIDEO / AUDIO L/R
Video (S-Video or Video) and audio inputs
for external devices, such as a camcorder or
VCR.
5
HEADPHONES JACK
You can connect a set of headphones if you
wish to watch a television programme without
disturbing the other people in the room.
¯
Prolonged use of headphones at a high
volume may damage your hearing.
Ê
The product colour and shape may vary depending on the model.
Side Panel
or
5
2
4
1
3
English - 8
Viewing the Remote Control
The performance of the remote control may be affected by bright light.
1
POWER button
(turns the TV on and off)
2
Selects the TV and DTV
mode directly
3
Number buttons for direct
channel access
4
One/Two-digit channel
selection
5
Temporary sound switch-off
6
Volume increase
Volume decrease
7
Electronic Program Guide
(EPG) display
8
Use to quickly select
frequently used functions.
9
Control the cursor in the
menu
0
Use to see information on
the current broadcast
!
Use these buttons in the
Channel list and WISELINK,
etc.
#
Press to select the optional
display and sound modes for
sports, cinema and games.
$
VCR/DVD Function (Rewind,
Stop, Play/Pause, Fast/
Forward)
%
Available source selection
^
Previous channel
&
Next channel
Previous channel
*
Displays the main on-screen
menu
(
This function enables you to
view and play photo (JPEG)
and audio files (MP3) from
an external device. (See
page 46 (JPEG), 56 (MP3))
)
Returns to the previous
menu
a
Exit the on-screen menu
b
Picture size selection
c
Use this when connecting
a SAMSUNG DMA (Digital
Media Adapter) device
through an HDMI interface
and switching to DMA
mode.(The DMA button is
optional.)
For more information on
the operating procedures,
refer to the user manual
of the DMA. This button
is available when
“Anynet+(HDMI-CEC)" is
“On” (see page 64)
d
Digital subtitle display
e
Channel control button
(Refer to page 18)
Teletext Functions
(Refer to page 68)
2
Exit from the teletext display
(depending on the model)
7
Teletext store
8
Teletext size
0
Teletext reveal
!
Fastext topic selection
@
Teletext display/mix both
teletext information and the
normal broadcast
%
Teletext mode selection
(LIST/FLOF)
^
Teletext sub page
&
P :Teletext next page
P
:Teletext previous page
*
Teletext index
)
Teletext hold
a
Teletext cancel
Continued...
W.LINK
English - 9
Installing Batteries in the Remote Control
1 Lift the cover at the back of the remote control upward as
shown in the figure.
2 Install two AAA size batteries.
¯
Make sure to match the “+” and “” ends of the
batteries with the diagram inside the compartment.
Do not mix battery types, i.e. alkaline and manganese.
3 Close the cover as shown in the figure.
¯
Remove the batteries and store them in a cool and dry
place if you won’t be using the remote control for a long
time. The remote control can be used up to about 23 feet
from the TV. (Assuming typical TV usage, the batteries last
for about one year.)
¯
If the remote control doesn’t work! Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
Switching Your Television On and Off
The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
¯
The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
2 Press the
(Power) button (On/Off) on the front of the television or press the POWER button on
the remote control to switch the television on. The channel that you were watching last is re-selected
automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Storing
Channels Automatically” on page 14 or “Storing Channels Manually” on page 15.
¯
If the television is initially powered on, several basic customer settings proceed automatically.
Refer to “Plug & Play Feature” on page 10.
3 To switch the television off, press the
(Power) button (On/Off) on the front of the television or press
the
POWER button on the remote control.
4 To switch the TV on, press the
(Power) button (On/Off) on the front of the TV or press the POWER
button or number buttons on the remote control.
Viewing the Menus
1 Press the MENU button.
The main menu is displayed on the screen.
Its left side has six icons:
Picture, Sound, Channel,
Setup, Input, and Application
2 Press the ▲ or ▼ button to select one of the icons.
Press the
ENTER button to access the icon’s sub-menu.
3 Press the ▲ or ▼ button to move to items in the menu.
Press the
ENTER button to enter items in the menu.
4 Press the ▲/▼/◄/► button to change the selected items.
Press the
RETURN button to return to the previous menu.
5 Press the EXIT button to exit from the menu.
W.LINK
Mode : Standard
Cell Light : 7
Contrast : 95
Brightness : 45
Sharpness : 50
Colour : 50
Tint (G/R) : G50/R50
Detailed Settings
Picture
English - 10
Plug & Play Feature
When the television is initially powered on, several basic customer settings proceed automatically
and subsequently.The following settings are available.
If you accidentally select the wrong country for your TV, the characters on the screen may be wrongly
displayed.
Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2)
digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive
DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with
the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not
be available in some countries.
¯
The Screen Saver is activated if there is no remote control key input for longer than 1 minute while
Plug & Play is running.
1 If the television is in standby mode, press the POWER
button on the remote control. The message
Les menus
Langue, Enr. démo, Canaux et Heure seront définis. is
displayed.
2 Press the ENTER button, Select the OSD Language
menu is automatically displayed. Press the
ENTER
button.
3 Select the appropriate language by pressing the ▲ or ▼
button. Press the
ENTER button to confirm your choice.
The message
Select ‘Home Use’ when installing this
TV in your home. is displayed.
4 Press the ◄ or ► button to select Store Demo or Home
Use, then press the ENTER button. The message to
check the connected status of the antenna is displayed.
¯
The default selection is Home Use.
¯
We recommend setting the TV to Home Use mode
for the best picture in your home environment.
¯
Store Demo mode is only intended for use in retail
environments.
¯
If the unit is accidentally set to Store Demo mode
and you want to return to
Home Use (Standard):
Press the Volume button on the TV. When the
volume OSD is displayed, press and hold the
MENU
button on the TV for 5 seconds.
5 Press the ▲ or ▼ button to select the channel source to
memorize. Press the ENTER button to select Start.
Digital & Analogue: “Digital” and “Analogue” channels.
Digital: “Digital” channels.
Analogue: “Analogue” channels.
The channel search will start and end automatically.
Press the ENTER button at any time to interrupt the
memorization process.
After all the available channels are stored, the message Set the Clock Mode is displayed.
Continued...
Plug & Play
Auto Store in progress. Channel 6
Digital Channels : 0
Analogue Channels : --
Stop
Enter Skip
1%
Plug & Play
Les menus Langue, Enr. démo, Canaux et Heure seront définis.
Entrer
OK
Plug & Play
Select the OSD Language
Enter
Menu Language : English
Move
Nederlands
English
Soumi
Plug & Play
Select the channel source to memorize.
Digital & Analogue
Digital
Analogue
Start
Start
EnterMove
Start
Skip
Plug & Play
Select 'Home Use' when installing this TV in your home.
Home Use
Store Demo
Move Enter
English - 11
¯
To stop the search before it has finished, press the
ENTER button with stop selected.
Press the ◄ or ► button to select Yes, then press
the ENTER button. The Auto Store menu then
reappears. Press the ENTER button when channel
memorization is completed.
6 The message Set the Clock Mode is displayed. Press
the ENTER button. Press the ▲ or ▼ button to select
Manual for setting the current time manually, then press
the ENTER button. The message Set current date and
time. is displayed.
¯
If you select Auto, the message Enjoy your viewing
is displayed. If you have received a digital signal, the
time will be set automatically.
7 Press the ◄ or ► button to move to Day, Month, Year,
Hour or Minute. Set the date and time you want by
pressing the ▲ or ▼ button, then press the ENTER
button.
¯
You can set the Day, Month, Year, Hour and Minute
directly by pressing the number buttons on the
remote control.
8 The message Enjoy your viewing. is displayed. When
you have finished, press the ENTER button.
¯
Even if the ENTER button is not pressed, the
message will automatically disappear after several
seconds.
If you want to reset this feature …
1 Press the
MENU button to display the menu.
2 Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
3 Press the ENTER button again to select Plug & Play.
4 Enter your 4 digit PIN number. The default PIN number of
a new TV set is “0-0-0-0”.
¯
For further details on setting up options, refer to the
pages 10-11.
¯
The Plug & Play feature is only available in the TV
mode.
Plug & Play
Auto Store is completed.
Digital channels: 20
Analogue channels: 36
OK
Enter
OK
Plug & Play
Enjoy your viewing.
Skip
Plug & Play
Language : English
Time
Change PIN
Parental Lock
Subtitle
Teletext Language : ----
Preference
Setup
Plug & Play
Set the Clock Mode.
Clock Mode : Auto
Auto
Manual
Enter Skip
Move
Plug & Play
Set current date and time
01
Day
01
Month
2008
Year
Hour
00
Minute
SkipEnterAdjustMove
00
Plug & Play
The Menu Language, Store Demo, Channels and Time will
be set.
Enter PIN
Return
0~9
English - 12
Viewing External Signal Sources
You can switch between viewing signals from connected
equipment, such as a VCR, DVD, Set-Top Box, and the TV
source.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Input, then press the
ENTER button.
3 Press the ENTER button again to select Source List.
4 Press the ▲ or ▼ button to select the signal source, then
press the ENTER button.
Available signal sources: TV,Ext1,Ext2, AV, S-Video,
Component, PC, HDMI1, HDMI2/DVI, HDMI3, USB
¯
You can choose only those external devices that are
connected to the TV.
¯
Using the Color buttons on the remote with the Source list.
¯
You can select these options simply by pressing the
SOURCE button on the remote control.
¯
To watch television programme again, press the TV/DTV
button and select the channel number required.
Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and easily. The
“TOOLS” menu changes depending on which external input mode you are viewing.
1 Press the TOOLS button.
The Tools menu will appear.
2 Press the ▲ or ▼ button to select a menu, then press the
ENTER button.
3 Press the ▲/▼/◄/►/ENTER buttons to display, change, or
use the selected items.
For a more detailed description of each function, refer to
the corresponding page.
Device List, see page 65
Picture Mode, see page 27
Sound Mode, see page 32
Sleep Timer, see page 35
SRS TS XT, see page 32
Energy Saving, see page 38
Dual I II, see page 34
PIP, see page 38
Red (Refresh): Refreshes the connecting external
devices.
(Option): Displays the Edit Name and Information
menus.
Source List
Edit Name
Input
TV
Ext.1
----
Ext.2
----
AV
----
S-Video
----
Component
----
PC
----
Refresh Option
Tools
Device List
Picture Mode : Standard
Sound Mode : Standard
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual I II : Mono
Move Enter Exit
English - 13
Editing Device Names
You can give a name to the external source.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Input, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Edit Name, then press
the
ENTER button.
4 Press the ▲ or ▼ button to select the external source to
be edited, then press the
ENTER button.
5 Select the required device by pressing ▲ or ▼, then press
the
ENTER button.
Available device names:
VCR, DVD, Cable STB, Satellite
STB, PVR STB, AV Receiver, Game, Camcorder, PC, TV,
IPTV, Blu-Ray, HD DVD, Digital Media Adapter.
6 Press the EXIT button to exit.
Input
Source List
Edit Name
Edit Name
Ext.1 :
----
Ext.2 :
----
AV :
----
S-Video :
----
Component :
----
PC :
----
HDMI1 :
----
Enter ReturnMove
Edit Name
Ext 1 :
----
Ext 2 :
----
AV :
----
S-Video :
----
Component :
----
PC :
HDMI1 :
Enter ReturnMove
----
VCR
DVD
Cable STB
Satellite STB
PVR STB
English - 14
Storing Channels Automatically
You can scan for the frequency ranges available to you (availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However you can sort numbers manually and clear any channels you do not wish to
watch.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Auto Store, then press
the
ENTER button.
4 Press the ▲ or ▼ button to select the channel source to
memorize. Press the
ENTER button to select Start.
¯
Digital & Analogue: “Digital” and “Analogue”
channels.
Digital: “Digital” channels.
Analogue: “Analogue” channels.
¯
Scans for all channels with active broadcast stations
and stores them in the TV’s memory.
¯
If you want to stop Auto Store, press the ENTER
button.
The
Stop Auto Store? message will be displayed.
Select
Yes by pressing the ◄ or ► button, then press
the
ENTER button.
5 Press the
EXIT button to exit.
¯
When there is a locked channel by Channel Lock
setting, PIN input screen appears. (refer to page 25)
Channel
Auto Store
Manual Store
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Channels
Child Lock : On
Auto Store
Auto Store is progress. Channel 6
Digital Channels : 0
Analogue Channels : --
Stop
Enter
4%
Return
Auto Store
Select the channel source to memorize.
Digital & Analogue
Digital
Analogue
Start
Start
EnterMove
Start
Return
Plug & Play
Auto Store is incomplete.
Digital channels: 20
Analogue channels: 36
OK
Enter Skip
English - 15
Storing Channels Manually
You can store television channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Manual Store, then
press the
ENTER button.
4 Select the required option by pressing the ▲ or ▼ button,
then press the
ENTER button.
5
When you are satisfied with your setting, press the ENTER button.
6 Press the EXIT button to exit.
Digital Channel
Channel
Press the ▲, ▼ or numeric buttons (0~9) to select a channel.
The available channels are 5~69. The corresponding
frequency for the selected channel is automatically set
Frequency
You can specify the frequency (KHz) using the numeric buttons
(0~9). If you do not know the exact frequency, follow the above
step to select the frequency automatically using channel.
Bandwidth
Press the ▲ or ▼ button to select a bandwidth. The
available bandwidths are 7 and 8 MHz.
Analogue Channel
Programme (Programme number to be assigned to a
channel)
Press the ▲ or ▼ button until you find the correct number.
¯
You can also select the channel number directly by
pressing the numeric buttons (0~9).
Colour System: Auto/PAL/SECAM/NTSC4.43
Press the ▲ or ▼ button to select the required colour standard.
Sound System: BG/DK/I/L
Press the ▲ or ▼ button to select the required sound
standard.
Channel (When you know the number of the channel to be stored)
Press the ▲ or ▼ button to select C (Air channel) or S
(Cable channel).
Press the ► button, then press the ▲ or ▼ button to select
the required number.
¯
You can also select the channel number directly by
pressing the numeric buttons (0~9).
¯
If there is abnormal sound or no sound, re-select the sound standard required.
Search (When you do not know the channel numbers)
Press the ▲ or ▼ button to start the search.
The tuner scans the frequency range until the first channel or the channel that you selected is
received on the screen.
Store (When you store the channel and associated programme number)
Set to
OK by pressing the ENTER button.
¯
Channel mode
-
P (Programme mode): When completing tuning, the broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You can select a channel by entering the position
number in this mode.
-
C (Air channel mode): You can select a channel by entering the assigned number to each air
broadcasting station in this mode.
-
S (Cable channel mode): You can select a channel by entering the assigned number for each cable
channel in this mode.
Channel
Auto Store
Manual Store
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Channels
Child Lock : On
Fine Tune
Manual Store
178750 KHz
Frequency
8 MHz
Bandwidth
5
Channel
Return
Search
AdjustMove
Manual Store
Return
AdjustMove
AUTO
Colour System
BG
Sound System
1
Programme
40 MHz
Search
?
Store
C
--
Channel
Auto Store
Manual Store
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Channels
Child Lock : On
Fine Tune
Channel
Digital Channel
Analogue Channel
English - 16
Viewing the EPG (Electronic Programme Guide) Information
The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme
entries may appear blank or out of date as a result of the information broadcast on a given
channel. The display will dynamically update as soon as new information becomes available.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Full Guide, Mini Guide or
Default Guide then press the ENTER button.
Full Guide
For the six channels indicated in the left-hand column, displays
the Current programme and the Next programme information.
¯
One hours of programme information is displayed
which may be scrolled forwards or backwards in time.
Mini Guide
The information of each program is displayed by each line
on the current channel Mini Guide screen from the current
program onwards according to the program starting time order.
▲/▼/◄/►,
(ENTER)
Select a programme by pressing the
▲/▼/◄/► button.
If the next progrmme is selected,
it is scheduled with the clock icon
displayed. If the
ENTER button is
pressed again, press the ▲/▼/◄/►
button to select
Cancel Schedules,
the scheduling is canceled with the
clock icon gone.
For details about scheduling
programmes, refer to the section.
RED
Toggle between the
Mini Guide or
Full Guide.
GREEN
Full Guide: Scroll backwards quickly
(24 hours).
Mini Guide: Display next page quickly.
YELLOW
Full Guide: Scroll forwards quickly
(24 hours).
Mini Guide: Display previous page
quickly.
BLUE Exit the guide.
INFO
INFO button for the detailed
information. Channel Number,
Running Time, Status Bar, Parental
Level, Video Quality Information
(HD/SD), Sound Modes, Subtitle or
Teletext, languages of Subtitle or
Teletext and brief summary of the
highlighted programme are included
on the detailed information. “…” will
be appeared if the summary is long.
Default Guide: Mini Guide/Full Guide
Press the ▲ or ▼ button to select Mini Guide or Full
Guide. Press the ENTER button. The selected guide menu
is displayed.
¯
You can also display the guide menu simply by
pressing the
GUIDE button.
Channel
Auto Store
Manual Store
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Channels
Child Lock : On
Fine Tune
Signal Information
Channel
Manual Store
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Channels
Child Lock : On
Fine Tune
Signal Information
LNA : On
Full Guide
Mini Guide
Watch
Exit
DTV 805 BBCi
BBCi
18:00~0:00
BBCi-featuring news, sport, weather and TV..
18:08 Fri 5 Aug
Today 12:00 - 13:00 13:00 - 14:00
801 BBC NEWS 24 BBC Ne.. BBC News
802 BBC ONE BBC Ne.. Departure Lounge
803 BBC THREE
This is BBC THREE
The 7 O’..
804 BBC THREE
This Weakest L..
Tsunami..
805 BBCi
BBCi
806 Canal 7
No Information
INFO
information
+24 Hours
Full Guide Exit
Mini Guide DTV 801 BBC NEWS 24
18:00 BBC News
18:30 Sportsday
19:00 BBC News
Watch
INFO
information
Next Page
Full Guide
Mini Guide
Default Guide
: Mini GuideMini Guide
Channel List
Channel Mode : Added Channels
Child Lock : On
Fine Tune
Signal Information
LNA : On
Channel
Mini Guide
Full Guide
English - 17
Viewing All Channels
Show all currently available channels. To use the Channel List
function, first run Auto Program.
1 Press the MENU button.
Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
Press the ▲ or ▼ button to select Channel List, then press
the ENTER button.
2 Press the ◄ button to select Added Channels.
3 Press the ▲ or ▼ button to select All Channels, then press
the ENTER button. Shows all currently available channels.
4 Press the ▲ or ▼ button to select a channel to view, then
press the ENTER button.
Press the CH LIST button on the remote control to bring up
the channel lists.
Using the Color buttons on the Remote with the Channel List
Red (Channel Type): Toggle between your “TV”, “Radio”,
“Data/Other” and “All”.
Green (Zoom): Enlarges or shrinks a channel number.
Yellow (Select): Selects multiple channel lists.
(Option): Displays the “Delete”(or “Add”), “Add to
Favourite”(or “Delete from Favourite”), “Lock”,
“Timer Viewing”, “Edit Channel Name”, “Sort”,
“Edit Channel Number”, “Select All”, “Deselect
All” or “Auto Store” menu. (The Options menus
may differ depending on the situation.)
¯
A gray-colored channel indicates the channel has been deleted. The Add menu only appears for
deleted channels.
¯
A channel marked with ♥ mark means the channel has been set as a Favourite.
The Delete from Favourite menu only appears for channels with the ♥ mark.
Added Channels All Channels
Channel
Mini Guide
Default Guide :Mini Guide
Channel List
Channel Mode : Added Channels
Child Lock : On
Fine Tune
Signal Information
LNA : Off
824 UKTV Gold
825 UKTV style
1 C --
2 C --
3 C --
4 C --
5 C --
6 C --
7 C --
8 C --
824 UKTV Gold
825 UKTV style
1 C --
2 C --
3 C --
4 C --
5 C --
6 C --
7 C --
8 C --
All
Channel Type
Zoom
Select Option
All
Channel Type
Zoom
Select Option
English - 18
Erasing and Adding Channels
You can delete or add a channel to display the channels
you want.
1 Press the MENU button.
Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
Press the ▲ or ▼ button to select Channel List, then
press the ENTER button.
2 Press the ◄ button to select Added Channels.
3 Press the ▲ or ▼ button to select All Channels.
Shows all currently available channels. Press the ENTER
button.
4 Press the ▲ or ▼ button to select a channel to delete, then
press the TOOLS button.
5 Press the ENTER button to select Delete.
All deleted channels will be shown on All Channels menu.
6 Press the EXIT button to exit.
¯
You can also add a channel to the All Channels menu
in the same manner.
¯
A channel must be deleted before it can be added
back to the Added Channels list.
¯
To Add (Restore) a channel back to the Added
Channel List, follow steps 1-3 above, press the ▲ or
▼ button to select a channel to add, the press the
TOOLS button. Press the ENTER button to select Add.
¯
Press the CH LIST button on the remote control to
bring up the channel lists.
Channel
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Channels
Child Lock :On
Fine Tune
Signal Information
LNA : Off
824 UKTV Gold
825 UKTV style
1 C --
2 C --
3 C --
4 C --
5 C --
6 C --
7 C --
8 C --
Added Channels
824 UKTV Gold
825 UKTV style
1 C --
2 C --
3 C --
4 C --
5 C --
6 C --
7 C --
8 C --
All Channels
824 UKTV Gold
825 UKTV style
1 C --
2 C --
3 C --
4 C --
5 C --
6 C --
7 C --
8 C --
Added Channels
Delete
Add to Favourite
Timer Viewing
Edit Channel Name
Sort
Select All
All
Channel Type
Zoom
Select Option
All
Channel Type
Zoom
Select Option
All
Channel Type
Zoom
Select Option
English - 19
Setting Your Favourite Channels
You can set channels you watch frequently as Favourite.
1 Press the MENU button.
Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
Press the ▲ or ▼ button to select Channel List, then
press the ENTER button.
2 Press the ◄ button to select Added Channels.
3 Press the ▲ or ▼ button to select All Channels, then
press the ENTER button.
¯
Shows all currently available channels.
4 Press the ▲ or ▼ button to select a channel as a favourite
channel.
¯
Adding multiple channels to Favourite.
Press the ▲ or ▼ button to select the desired channel
in the channel list. Then press the yellow button.
Repeat the above operation to select multiple
channels. The mark appears to the left of the
selected channels.
5 Press the TOOLS button.
6 Press the ▲ or ▼ button to select Add to Favourite, then
press the ENTER button.
The “♥” symbol will be displayed and the channel will be set
as a favourite.
7 To cancel your favourite channel selection, press the
TOOLS button when a favourite channel is selected. Press
the ▲ or ▼ button to select Delete from Favourite, then
press the ENTER button. The channel is deleted from
Favourites and the “♥” mark disappears.
Press the EXIT button to exit.
¯
You can also Add or Delete a channel from Favourite in the Added Channels menu in the same
manner.
¯
All favourite channels will be shown on Favourite menu.
¯
Press the CH LIST button on the remote control to bring up the channel lists.
824 UKTV Gold
825 UKTV style
1 C --
2 C --
3 C --
4 C --
5 C --
6 C --
7 C --
8 C --
All Channels
Delete
Add to Favourite
Timer Viewing
Edit Channel Name
Sort
Select All
Channel
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Channels
Child Lock : On
Fine Tune
Signal Information
LNA : Off
All
Channel Type
Zoom
Select Option
English - 20
Reserving a Program (Time Viewing)
If you reserve a program you want to watch, the channel is
automatically switched to the reserved channel in the Channel
List; even when you are watching another channel.
To reserve a program, set the current time fi rst. See pages 35.
Reserved chanels can only be set if they are in the Channel List
(See page 17).
1 Press the MENU button.
Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
Press the ▲ or ▼ button to select Channel List, then
press the ENTER button.
2 Press the ▲ or ▼ button to select a channel, then press
the TOOLS button.
3 Press the ▲ or ▼ button to select Timer Viewing, then
press the ENTER button.
The Reserve a Program (Timer Viewing) screen appears.
4 Press the ▲/▼/◄/► buttons to reserve a program and
then press the ENTER button.
Reserving a program has been completed.
Press the EXIT button to exit.
¯
You can also reserve a program in the All Channels or
Favourites menus using the same procedures.
¯
For information on how to confirm a viewing
reservation, refer to page 21. Only memorized
channels can be reserved.
¯
You can set the channel, month, day, year, hour and
minute directly by pressing the number buttons on the
remote control.
Press the CH LIST button on the remote control to bring
up the channel lists.
Digital Program Guide and Viewing Reservation
When a digital channel is selected, and you press the ► button,
the Program Guide for the channel appears. You can reserve a
program according to the procedures described above.
: A program currently being broadcast.
: A reserved program.
Continued...
Channel
Mini Guide
Default Guide :Mini Guide
Channel List
Channel Mode : Added Channels
Child Lock : On
Fine Tune
Signal Information
LNA : Off
Timer Viewing
Antenna Channel Repeat
DTV
1 Once
Date
01-01-2008
Start Time
10:09
Enter ReturnMove Adjust
824 UKTV Gold
825 UKTV style
1 C --
2 C --
3 C --
4 C --
5 C --
6 C --
7 C --
8 C --
Added Channels
Air
Channel Type
Zoom
Select Option
Delete
Delete from Favourite
Timer Viewing
Edit Channel Name
Sort
Select All
824 UKTV Gold
825 UKTV style
1 C --
2 C --
3 C --
4 C --
5 C --
6 C --
7 C --
8 C --
Added Channels
Air
Zoom
Option
Watch
1/22/2008
12:47 2.0
3:54 HD 1 99
6:44 HD 1 100
7:49 HD
8:59 +
10:08
10:37
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154

Samsung PS50A566 Manuel utilisateur

Catégorie
Téléviseurs LCD
Taper
Manuel utilisateur

dans d''autres langues