Weston 01-0201 Mode d'emploi

Taper
Mode d'emploi
Traditional Style
PASTA MACHINE
01-0201
REV111314
COMPONENT LIST
PASTA TIPS
CLEANING
ASSEMBLY INSTRUCTIONS
ROLLING DOUGH INSTRUCTIONS
CUTTING DOUGH INSTRUCTIONS
RECIPES
FOOD SAFETY
WARRANTY
LISTA DE COMPONENTES
CONSEJOS PARA PASTA
INSTRUCCIONES DE LIMPIEZA
ARMADO DE LA MÁQUINA DE PASTA
INSTRUCCIONES DE ENROLLADO DE LA MASA
INSTRUCCIONES PARA CORTRAR LA MAS
RECTAS
SEGURIDAD DE LOS ALIMENTOS
INFORMACIÓN DE GARANTÍA WESTON
LISTE DES PIÈCES
SUGGESTIONS POUR LES PÂTES
DIRECTIVES DE NETTOYAGE
ASSEMBLAGE DE LA MACHINE À PÂTE
INSTRUCTIONS POUR ROULER LA PÂTE
INSTRUCTIONS POUR COUPER LA PÂTE
RECETTES
SÉCURITÉ ALIMENTAIRE
INFORMATION SUR LA GARANTIE
3
4
5
6
7-8
8
9
10
12
14
15
16
17
18
19
20
21
22
24
25
26
27
28-29
29
30
31
35
TABLE OF CONTENTS / ÍNDICE / TABLE DES MATIÈRES
2
1
Regulator
Knob
Sheet Rollers
2
4
Rubber Foot
(Underneath)
Attachment Clip
3
Fettuccini Rollers
Spaghetti Rollers
Base
5
ENGLISH INSTRUCTIONS
COMPONENT LIST
DIAGRAM NUMBER PART DESCRIPTION PART NUMBER
1 HANDLE 01-0216
2 C-CLAMP 01-0217
3 FETTUCCINI/SPAGHETTI CUTTER
ATTACHMENT
01-0218
4 RUBBER FEET (4) 01-0211
If any components of this unit are broken, the unit does not operate properly or you
need a replacement instruction manual, visit us on the web at
WestonProducts.com
Or call Weston Products LLC Toll Free at 1-800-814-4895
Monday thru Friday 8:00am-5:00pm ET. Outside the U.S. call 001-440-638-3131
ENGLISH INSTRUCTIONS
4
DOUGH CONSISTENCY You know when you’re nished kneading the dough
when the ball of dough has a soft texture. It should feel moist, but not stick to your
ngers.
LET IT REST! When you have your dough ball, set it aside to rest for 15-30
minutes. While resting, wrap it in cellophane wrap or cover it with a damp towel
(or paper towel) to keep it from drying out. Resting gives the our time to fully
absorb the water.
WATER If the recipe that you are using calls for water, add it last in portions.
Depending on egg size and accuracy of our measurement, you may not need
the entire amount of water in the recipe.
FLOUR & WATER RATIO Don’t be afraid to use our. If after resting, the
dough feels too damp add a little our and knead it a little more (don’t worry, if
you add too much you can add more water or olive oil to balance it).
FLOUR IS YOUR BEST TOOL Before rolling out the dough or cutting the
sheets, sprinkle the rollers with our to keep the dough from sticking. This will
also help the dough separate when you cut the pasta.
Before cutting the dough and between changing the roller settings, dredge the
dough sheet in some our. This will also help to cut the dough better.
PASTA TIPS
5
ENGLISH INSTRUCTIONS
The Pasta Machine and the Cutter Attachment may have some excess oil on it
from the factory. This is to protect the machine during shipping. THIS OIL MUST
BE REMOVED BEFORE USING THE MACHINE!
Using a clean dry cloth, wipe all the surfaces clean. DO NOT USE WATER!
Never wash the Pasta Machine or the Cutter Attachment with water, place it in
water, or put it into the dishwasher. Simply wipe it clean with a dry cloth.
To clean the inner surfaces of the Pasta Machine and the Cutter Attachment
pass a piece of dough through the Rollers and Cutters several times, making sure
the dough touches all the surfaces, especially the sides where machine oil can
accumulate. Discard this dough when nished.
Use a dry pastry brush to remove any our or bits of dough from the hard to
reach places.
Lightly sprinkle some our on the Rollers and Cutters. Using a dry brush, work
the our into the edges of the Pasta Machine and into the Cutter Attachment.
Brush all the our away and wipe the machine clean again with a clean, dry cloth.
NEVER INSERT KNIVES BETWEEN THE ROLLERS OR THE CUTTERS!
CLEANING
6
ENGLISH INSTRUCTIONS
PASTA MACHINE ASSEMBLY
1. Position the Pasta Machine Base
on a table or countertop, near the
edge of the work surface.
2. Slide the C-Clamp into the
C-Clamp port in the side of the
Pasta Machine Base. The threaded
screw portion of the C-Clamp will be
underneath the table or countertop.
FIGURE A
3. Tighten the Thumbscrew on
the C-Clamp to secure the Pasta
Machine to the table or countertop.
FIGURE B
4. Align the Clips of the Cutter
Attachment with the Clips on the
Pasta Machine. Slide the Cutter
Attachment onto the Pasta Machine
until fully seated. FIGURE C
5. Align the notches on the Handle
with the notches in the Drive Slot of
choice. Slide the Handle into the
Drive Slot of the Roller or the Cutter
Attachment to be used.
FIGURE D
NOTE: Be sure to notice when the
Handle turns, it passes below the
edge of the work surface and turns
freely, it should not hit the work
surface. If the Handle comes in
contact with the work surface, loosen
the C-Clamp and reposition the
Pasta Machine to allow more space.
FIGURE E
FIGURE A
FIGURE B
Base
C-Clamp
C-Clamp Port
C-Clamp
Thumb-
screw
FIGURE C
Cutter Attachment
Clips
Clips
FIGURE D
Spaghetti Cutter
Drive Slot
Fettuccini
Cutter
Drive
Slot
Roller
Drive Slot
Handle
FIGURE E
7
ENGLISH INSTRUCTIONS
Clips
RECIPES FOR THE DOUGH
WILL FOLLOW THESE
INSTRUCTIONS. THESE
INSTRUCTIONS START
WITH FULLY MIXED DOUGH,
READY TO BE USED.
1. Follow the “Pasta Machine
Assembly Instructions.” Align
the notches on the Handle with
the notches in the Roller Drive
Slot. Slide the Handle into the
Roller Drive Slot. FIGURE F
2. Locate the Regulator Knob
on the left side of the Pasta
Machine. The Regulator Knob
is numbered 1-7. The number
1 setting is the narrowest
setting for the Sheet Rollers;
the number 7 is the widest
setting for the Sheet Rollers
(Figure G). To adjust the
Regulator Knob, pull out on
the Knob and turn it to the
desired setting. As you turn
the Regulator Knob you will be
able to see the Sheet Rollers
moving closer together or
further apart.
3. Lightly our your work
space. See “Pasta Tips” for
more instruction on making
dough and pasta.
4. With the Regulator Knob
in the “7” position, turn the
Handle clockwise while feeding
a piece of dough into the
Rollers (Figure H). Once the
dough has gone through the
Rollers lightly our it, fold it
in half and run it through the
Rollers again. Repeat this
process several times: lightly
our, fold in half, run through
Rollers.
5. As the dough exits the
Rollers, it will get longer with
each pass. Lay the strip of
dough out at on your work
space.
ROLLING DOUGH INSTRUCTIONS
FIGURE F
Roller
Drive Slot
Handle
FIGURE G
Regulator
Knob
Sheet Rollers
FIGURE H
8
ENGLISH INSTRUCTIONS
1. Follow the “Pasta Machine
Assembly Instructions.” Align the
notches on the Handle with the
notches in the Cutter Drive Slot of
choice. Slide the Handle into the
Cutter Drive Slot. FIGURE I
2. Cut a piece of rolled out dough, long
enough to be easily handled.
3. Lightly our your work space and
the pasta sheet. See “Pasta Tips”
for more instruction on making dough
and pasta.
4. While slowly turning the Handle
clockwise, carefully start the dough into
the Cutter Attachment.
5. As the cut noodles exit the machine
from underneath, continue to carefully
guide the dough into the Pasta
Machine while slowly turning the
Handle. FIGURE J
6. Lay your freshly cut noodles out
on a lightly oured surface or on a
drying rack (Sold Separately) to dry before
cooking. FIGURE K
6. Now set Regulator Knob to the “6” position. Run the dough through the
Rollers. Repeat this process several times, each time setting the Regulator
Knob to the next setting until the dough reaches the thickness you desire. If the
sheet gets too long to manage, simply cut it with a knife.
7. After reaching the desired thickness, leave the sheet to rest for about 10
minutes so that it will dry slightly and be hard enough for cutting, without sticking
to the Cutting Rollers.
CUTTING DOUGH INSTRUCTIONS
FIGURE I
Handle
Spaghetti
Cutter Drive
Slot
Fettuccini
Cutter Drive
Slot
FIGURE J
FIGURE K
9
ENGLISH INSTRUCTIONS
INSTRUCTIONS
Measure the semolina our into a bowl, or pour it in a mound onto a pastry board. Make a
well in the center of the our.
Pour the beaten eggs or egg whites, oil and water into the well in the our.
Mix together with a fork or your ngers until the dough can be gathered into a rough ball.
Moisten any remaining dry bits of dough with drops of water and press them into the ball.
Knead the dough until all the ingredients are thoroughly blended, and the dough is the
same consistency throughout. If it sticks to your ngers, add some our a little at a time
just until it no longer sticks. If it seems too dry, add water a few drops at a time. The
dough will be stiff at this time; you will use the pasta machine to continue kneading it until it
is smooth, shiny and elastic.
SEMOLINA PASTA DOUGH
INGREDIENTS
1 ½ CUPS SEMOLINA FLOUR 2 EGGS OR 3 EGG WHITES, BEATEN
2 TBSP WATER 2 TBSP OLIVE OIL
RECIPES
INSTRUCTIONS
Measure the our into a bowl, or pour it in a mound onto a pastry board. Make a well in
the center of the our.
Pour the egg, egg white, and oil into the well in the our.
Mix together with a fork or your ngers until the dough can be gathered into a rough ball.
Moisten any remaining dry bits of dough with drops of water and press them into the ball.
Knead the dough until all the ingredients are thoroughly blended, and the dough is the
same consistency throughout. If it sticks to your ngers, add some our a little at a time
just until it no longer sticks. If it seems too dry, add water a few drops at a time. The
dough will be stiff at this time; you will use the pasta machine to continue kneading it until it
is smooth, shiny and elastic.
WHITE FLOUR PASTA DOUGH
INGREDIENTS
1 ½ CUPS UNSIFTED ALL-PURPOSE
FLOUR
1 EGG
1 EGG WHITE 1 TBSP OLIVE OIL
A FEW DROPS OF WATER
There are basic rules to follow when handling food.
They are COOK, SEPARATE, CLEAN, and CHILL.
COOK
It’s crucial to cook food to a safe internal temperature to destroy bacteria that is present.
The safety of hamburgers and other foods made with ground meat has been receiving a lot
of attention lately, and with good reason. When meat is ground, the bacteria present on the
surface is mixed throughout the ground mixture. If this ground meat is not cooked to at least
160
o
F to 165
o
F (71
o
C to 74
o
C), bacteria will not be destroyed and there’s a good chance you
will get sick.
Solid pieces of meat like steaks and chops don’t have dangerous bacteria like E. coli on the
inside, so they can be served more rare. Still, any beef cut should be cooked to an internal
temperature of at least 145
o
F (63
o
C) (medium rare). The safe temperature for poultry is 180
o
F
(82
o
C) and solid cuts of pork should be cooked to 160
o
F (71
o
C). Eggs should be thoroughly
cooked too. If you are making a meringue or other recipe that uses uncooked eggs, buy
specially pasteurized eggs or use prepared meringue powder.
SEPARATE
Foods that will be eaten uncooked and foods that will be cooked before eating MUST
ALWAYS be separated. Cross-contamination occurs when raw meats or eggs come in
contact with foods that will be eaten uncooked. This is a major source of food poisoning.
Always double-wrap raw meats and place them on the lowest shelf in the refrigerator so
there is no way juices can drip onto fresh produce. Then use the raw meats within 1-2 days
of purchase, or freeze for longer storage. Defrost frozen meats in the refrigerator, not on the
counter.
When grilling or cooking raw meats or sh, make sure to place the cooked meat on a clean
platter. Don’t use the same platter you used to carry the food out to the grill. Wash the utensils
used in grilling after the food is turned for the last time on the grill, as well as spatulas and
spoons used for stir-frying or turning meat as it cooks.
Make sure to wash your hands after handling raw meats or raw eggs. Washing hands with
soap and water, or using a pre-moistened antibacterial towelette is absolutely necessary after
you have touched raw meat or raw eggs. Not washing hands and surfaces while cooking is a
major cause of cross-contamination.
CLEAN
Wash your hands and work surfaces frequently when you are cooking. Washing with soap
and warm water for at least 15 seconds, then dry with a paper towel.
CHILL
Chilling food is very important. The danger zone where bacteria multiply is between 40
o
F and
140
o
F (4
o
C and 6
o
C). Your refrigerator should be set to 40
o
F (4
o
C) or below; your freezer should
be 0
o
F (-17
o
C) or below. Simple rule: serve hot foods hot, cold foods cold. Use chang dishes
or hot plates to keep food hot while serving. Use ice water baths to keep cold foods cold. Never
let any food sit at room temperature for more than 2 hours - 1 hour if the ambient temperature
is 90
o
F (32
o
C) or above. When packing for a picnic, make sure the foods are already chilled
when they go into the insulated hamper. The hamper won’t chill food - it just keeps food cold
when properly packed with ice. Hot cooked foods should be placed in shallow containers and
immediately refrigerated so they cool rapidly. Make sure to cover foods after they are cool.
NOTE: Special considerations must be made when using venison or other wild game, since it
can become heavily contaminated during eld dressing. Venison is often held at temperatures
that could potentially allow bacteria to grow, such as when it is being transported. Refer to
the USDA Meat and Poultry Department for further questions or information on meat and
food safety.
FOOD SAFETY
10
ENGLISH INSTRUCTIONS
Weston Products LLC warrants to the ORIGINAL RETAIL PURCHASER of this product that if operated in accordance
with the printed instruction accompanying it, then for a period of 1 year from the date of purchase, the product shall be free
from defects in material and workmanship.
The Warranty Card, along with a copy of the original receipt, must be received by Weston Products LLC within 30
days from purchase date for the warranty to apply. Failure to send the completely lled out Warranty Card, along with a
copy of the original receipt, will void the warranty.
The product must be delivered to or shipped freight prepaid to Weston Products LLC for warranty services, in either
its original packaging or similar packaging affording an equal degree of protection. Damage due to shipping is not the
responsibility of the company. Weston Products LLC charges a $35.00 per hour bench charge. NOTE: No repairs will
be started without the authorization of the customer. The return shipping cost to the customer will be added to the repair
invoice.
Prior to returning the product for Warranty Repair, the product must be thoroughly cleaned and free from any food
particles or other debris. Failure of the purchaser to comply with this standard will result in the unit being returned without
repair. In some cases, a $50 cleaning surcharge may apply.
Weston Products LLC will repair (or at its discretion, replace) the product free of charge, if in the judgment of the
company, it has been proven to be defective as to seller’s labor and material, within the warranty period.
New or rebuilt replacements for factory defective parts will be supplied for one (1) year from the date of purchase.
Replacement parts are warranted for the remainder of the original warranty period.
For non-warranty repairs, contact Weston Products LLC’s Customer Service at 1-800-814-4895 M-F 8am-5pm ET
(outside of the United States 001-440-638-3131) to obtain a Return Merchandise Authorization Number (RMA Number).
Weston Products LLC will refuse all returns that do not contain this number. DO NOT RETURN THE UNIT WITHOUT
PROPER AUTHORIZATION FROM WESTON PRODUCTS LLC.
LIMITATIONS: The warranty is void if the product is used for any purpose other than that for which it is designed.
The product must not have been previously altered, repaired, or serviced by anyone else other than Weston Products
LLC. If applicable, the serial number must not have been altered or removed. The product must not have been subjected
to accident in transit or while in the customer’s possession, misused, abused, or operated contrary to the instructions
contained in the instruction manual. This includes failure caused by neglect of reasonable and necessary maintenance,
improper line voltage and acts of nature. This warranty is not transferable and applies only to U.S. and Canadian sales.
Except to the extent prohibited by applicable law, no other warranties whether expressed or implied, including
warranty merchantability and tness for a particular purpose, shall apply to this product. Under no circumstances shall
Weston Products LLC be liable for consequential damages sustained in connection with said product and Weston
Products LLC neither assumes nor authorizes any representative or other person to assume for it any obligation or liability
other than such as is expressly set forth herein. Any applicable implied warranties are also limited to the one (1) year
period of the limited warranty.
This warranty covers only the product and its specic parts, not the food or other products processed in it. Weston is
not responsible for missing or damaged parts on discounted/clearance, resale or nal sale items where the seller may not
be able to guarantee full functionality or completeness of the unit.
CUT ALONG THE DOTTED LINE AND SEND THE WARRANTY CARD ALONG WITH A COPY OF YOUR
ORIGINAL PURCHASE RECEIPT TO:
Weston Products LLC / WARRANTY
20365 Progress Drive, Strongsville, OH 44149 USA
Customer Name:
Address:
City/State/Zip/Country:
Telephone Number:
E-Mail Address:
Original Date of Purchase:
Product Model #:
Serial # (if applicable):
I have read the warranty information. Initial here:
WESTON WARRANTY INFORMATION
SAVE THIS WARRANTY INFORMATION FOR YOUR RECORDS!
WESTON WARRANTY CARD
SEND THIS CARD ALONG WITH A COPY OF YOUR ORIGINAL PURCHASE RECEIPT TO:
WESTON PRODUCTS LLC / WARRANTY, 20365 PROGRESS DRIVE, STRONGSVILLE, OH 44149 USA
Copy of Receipt
Included
REV111314
Debido a constantes mejoras en la fábrica,
el producto que se muestra puede ser
ligeramente diferente del producto en
esta caja.
Estilo Tradicional
MÁQUINA DE PASTA
01-0201
14
INSTRUCCIONES EN ESPAÑOLINSTRUCCIONES EN ESPAÑOL
LISTA DE COMPONENTES
DIAGRAM NUMBER PART DESCRIPTION PART NUMBER
1 MANGO 01-0216
2 ABRAZADERA EN C 01-0217
3 ACCESORIO CORTADOR DE FETTUCCINI/
SPAGHETTI
01-0218
4 PIE DE GOMA (4) 01-0211
Si cualquier componente de esta unidad está roto, si no funciona debidamente, o si necesita un
instructivo de repuesto, visítenos en la Web en
WestonProducts.com
O llame a Weston Products LLC larga distancia sin costo 1-800-814-4895
De lunes a viernes, de 8:00 am a 5:00 pm tiempo del ET. Fuera de Estados Unidos llame
al 001-440-638-3131
Perilla
Reguladora
Gancho de unión
Base
1
Rodillos de
Láminas
2
4
Debajo
3
Rodillos de
Fettuccini
Rodillos de
Spaghetti
15
INSTRUCCIONES EN ESPAÑOL
INSTRUCCIONES EN ESPAÑOL
CONSISTENCIA DE LA MASA Sabes cuando haya terminado de amasar la
masa cuando la bola de masa tiene una textura suave. Se debe sentir húmeda,
pero no se adhieren a los dedos.
DEJAR REPOSAR! Cuando usted tiene su bola de masa, déjela a un lado
para descansar durante 15-30 minutos. Mientras descansa, envuélvalo en
papel de celofán o cubrirlo con una toalla húmeda (o una toalla de papel)
para evitar que se reseque. Descansar da el tiempo de harina de absorber
totalmente el agua.
AGUA Si la receta que está utilizando convocatorias de agua, añadir que
dure en porciones. Dependiendo del tamaño y la precisión de la medición de la
harina de huevo, puede que no necesite toda la cantidad de agua en la receta.
HARINA Y RELACIÓN DE AGUA No tenga miedo de usar la harina. Si
después de descansar, la masa se siente demasiado húmedo añadir un poco
de harina y amasar un poco más (no te preocupes, si se añade demasiada
puede agregar más agua o aceite de oliva para equilibrarlo).
HARINA DE ES SU MEJOR HERRAMIENTA Antes de rodar la masa o el
corte de las hojas, espolvorear los rodillos con harina para evitar que la masa
se pegue. Esto también ayudará a que la masa separar cuando se corta la
pasta.
Antes de cortar la masa y entre el cambio de la conguración de rodillos,
dragar la lámina de masa en un poco de harina. Esto también ayudará a
reducir la masa mejor.
CONSEJOS PARA PASTA
16
INSTRUCCIONES EN ESPAÑOLINSTRUCCIONES EN ESPAÑOL
La Máquina de Pasta y el Accesorio Cortador pueden tener exceso de aceite
de fábrica. Este aceite protege la máquina durante el transporte. ¡ELIMÍNELO
ANTES DE USAR LA MÁQUINA!
Utilice un paño seco y limpio en todas las supercies. ¡NO USE AGUA! No
lave la Máquina de Pasta o el Accesorio Cortador con agua, ni tampoco use el
lavavajillas para lavarlos. Simplemente límpielos con un paño seco.
Para limpiar las supercies internas de la Máquina de Pasta y del Accesorio
Cortador, pase un trozo de masa por los Rodillos y Cortadores varias veces,
asegurándose que la masa toque todas las supercies, especialmente los lados
donde se acumule el aceite de la máquina. Al terminar, bote la masa.
• Use una brocha de repostería para eliminar toda la harina o restos de masa
de los lugares de difícil acceso.
• Espolvoree un poco de harina en los Rodillos y Cortadores. Usando una
brocha seca, aplique harina en los bordes de la Máquina de Pasta y en el
Accesorio Cortador. Elimine con la brocha toda la harina y limpie la máquina
con un paño limpio y seco.
• ¡NO INSERTE CUCHILLOS ENTRE LOS RODILLOS O CORTADORES!
LIMPIEZA
17
INSTRUCCIONES EN ESPAÑOL
INSTRUCCIONES EN ESPAÑOL
LIMPIEZA ARMADO DE LA MÁQUINA DE PASTA
1. Ubique la Base de la Máquina de
Pasta en una mesa o en la base del
mesón, cerca del borde de la supercie
de trabajo.
2. Inserte la Abrazadera en C en el
Oricio de la Abrazadera del costado
de la Base de la Máquina de Pasta.
La parte del tornillo roscado de la
Abrazadera en C quedará bajo la mesa
o de la supercie del mesón. FIGURA A
3. Apriete el Tornillo de Mariposa en la
Abrazadera en C para jar la Máquina
de Pasta a la mesa o la supercie del
mesón. FIGURA B
4. Alinee las abrazaderas del Accesorio
Cortador en la Máquina de Pasta.
Inserte el Accesorio Cortador en la
Máquina de Pasta hasta que quede
completamente asentado. FIGURA C
5. Alinee las muescas de la manija con
las muescas en la ranura de la unidad
de su elección. Deslice la manija en
la ranura de la unidad del rodillo o la
cubierta de corte a utilizar. FIGURA D
NOTA: Asegúrese de darse cuenta
cuando la manija se gira, que pasa
por debajo del borde de la supercie
de trabajo y gira libremente, no debe
golpear la supercie de trabajo. Si la
manija se pone en contacto con la
supercie de trabajo, aoje el C-Clamp y
la posición de la máquina de pasta para
permitir más espacio. FIGURA E
FIGURA A
FIGURA B
Base
Abrazade-
ra en C
Oricio de la
Abrazadera
en C
Tornillo de
Mariposa de la
Abrazadera en C
FIGURA C
Accesorio
Cortador
Abrazaderas
Abrazaderas
FIGURA D
Ranura de Mando
del Cortador de
Spaghetti
Ranura de
Mando del
Cortador de
Fettuccini
Ranura de
Mando del
Rodillo
Mango
FIGURA E
LAS RECETAS PARA LA
MASA SEGUIRÁN ESTAS
INSTRUCCIONES. ESTAS
INSTRUCCIONES COMIENZAN
CON LA MASA COMPLETAMENTE
MEZCLADA, LISTA PARA USAR.
1. Siga las “Instrucciones de Armado
de la Máquina de Pasta”. Alinee
las muescas del Mango con las
muescas de la Ranura de Mando
del Rodillo. Inserte el Mango en la
Ranura de Mando del Rodillo.
FIGURA F
2. Locate the Regulator Knob 2.
Ubique la Perilla Reguladora en el
lado izquierdo de la Máquina de
Pasta. La Perilla Reguladora está
regulada de 1 a 7. La regulación
número 1 es la más angosta para
los Rodillos de Láminas; el número 7
es la regulación más ancha para los
Rodillos de Láminas (FIGURA G).
Para ajustar la Perilla Reguladora,
tire la perilla hacia fuera y devuélvala
hasta la regulación deseada. A
medida que vaya girando la Perilla
Reguladora, podrá ver que los
Rodillos de Láminas se acercan
entre sí o se separan.
3. Enharine levemente el espacio
de trabajo. Consulte “Consejos
para cocinar Pasta” para mayores
instrucciones sobre preparar masa
y pasta.
4. Con la Perilla Reguladora en la
posición “7”, gire el Mango hacia la
derecha pasando, a la vez, un trozo
de masa en los Rodillos (FIGURA
H). Una vez que la masa haya
pasado por los Rodillos, enharínela
levemente, dóblela por la mitad y
vuelva a pasarla por los Rodillos.
Repita este proceso varias veces:
enharine levemente, doble por la
mitad, vuelva a pasar la masa por los
Rodillos.
5. A medida que la masa vaya
saliendo de los Rodillos, se irá
alargando. Deje la franja de masa
plana en el espacio de trabajo.
INSTRUCCIONES DE ENROLLADO DE LA MASA
FIGURA F
Ranura de
Mando del
Rodillo
Mango
FIGURA G
Perilla
Reguladora
Rodillos de
Láminas
FIGURA H
18
INSTRUCCIONES EN ESPAÑOLINSTRUCCIONES EN ESPAÑOL
INSTRUCCIONES DE ENROLLADO DE LA MASA
19
INSTRUCCIONES EN ESPAÑOL
INSTRUCCIONES EN ESPAÑOL
1. Siga las “Instrucciones de
Armado de la Máquina de Pasta”.
Alinee las muescas del Mango
con las muescas de la Ranura
de Mando del Cortador de su
elección. Inserte el Mango en la
Ranura de Mando del Cortador”.
FIGURA I
2. Corte un trozo de masa
enrollada, lo sucientemente larga
para manipularla fácilmente.
3. Enharine levemente su espacio
de trabajo y la lámina de pasta.
Consulte “Consejos para Cocinar
Pasta” para mayores instrucciones
sobre cómo preparar la masa y la
pasta.
4. Girando levemente el Mango
hacia la derecha, inserte
cuidadosamente la masa en el
Accesorio Cortador.
5. A medida que los deos
cortados salgan desde debajo de
la máquina, siga cuidadosamente
guiando la masa hacia la Máquina
de Pasta girando levemente el
Mango. FIGURA J
6. Deje los deos recién cortados
en una supercie levemente
enharinada o en un soporte de
secado (Se vende por separado)
para que se sequen antes de
cocerlos. FIGURA K
6. Ahora regule la Perilla Reguladora en la posición “6”. Pase la masa por los
Rodillos. Repita este proceso varias veces, regulando la Perilla Reguladora
cada vez en el ajuste siguiente hasta lograr el espesor deseado. Si la lámina
queda demasiado larga como para manejarla, simplemente córtela con un
cuchillo.
7. Después de lograr el espesor deseado, deje la lamina reposar por
alrededor de 10 minutos de modo que se seque levemente y quede lo
sucientemente dura para cortar, sin pegarse a los Rodillos Cortadores
INSTRUCCIONES PARA CORTAR LA MAS
FIGURA I
Mango
Ranura de
Mando del
Cortador de
Spaghetti
FIGURA J
FIGURA K
INSTRUCCIONES
Mida la harina de sémola y colóquela en un bol, o viértala en montículo sobre
una tabla para amasar. Haga un hoyo en el centro de la harina.
Vierta los huevos batidos o las claras de huevo, el aceite y el agua en el hoyo
de la harina.
Mezcle con un tenedor o con los dedos hasta que pueda formarse un bollo con
la masa. Humedezca los trozos de masa secos que queden con gotas de agua
y únalos al bollo de masa.
Amase hasta que todos los ingredientes estén bien integrados y la masa tenga
una consistencia uniforme. Si se pega a sus dedos, agregue algo de harina,
poco a poco, hasta que ya no se pegue. Si parece demasiado seca, agregue
unas pocas gotas de agua a la vez. En este momento la masa estará dura;
utilizará la máquina de hacer pasta para amasarla hasta que está suave,
brillante y elástica.
MASA PARA PASTA DE SÉMOLA
INGREDIENTES
1 ½ TAZAS DE HARINA DE SÉMOLA 2 HUEVOS O 3 CLARAS, BATIDAS
2 CUCHARADAS DE AGUA 2 CUCHARADAS DE ACEITE DE
OLIVA
RECETAS
INSTRUCCIONES
Mida la harina y colóquela en un bol, o viértala en montículo sobre una tabla
para amasar. Haga un hoyo en el centro de la harina.
Vierta el huevo, la clara y el aceite en el hoyo de la harina.
Mezcle con un tenedor o con los dedos hasta que pueda formarse un bollo con
la masa. Humedezca los trozos de masa secos que queden con gotas de agua
y únalos al bollo de masa.
Amase hasta que todos los ingredientes estén bien integrados y la masa tenga
una consistencia uniforme. Si se pega a sus dedos, agregue algo de harina,
poco a poco, hasta que ya no se pegue. Si parece demasiado seca, agregue
unas pocas gotas de agua a la vez. En este momento la masa estará dura;
utilizará la máquina de hacer pasta para amasarla hasta que está suave,
brillante y elástica.
MASA PARA PASTA DE HARINA BLANCA
INGREDIENTES
1 ½ TAZAS DE HARINA COMÚN 1 HUEVO
1 CLARA DE HUEVO 1 CUCHARADA DE ACEITE DE OLIVA
UNAS GOTAS DE AGUA CREMA BATIDA
20
INSTRUCCIONES EN ESPAÑOLINSTRUCCIONES EN ESPAÑOL
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Weston 01-0201 Mode d'emploi

Taper
Mode d'emploi

dans d''autres langues