Plott The First Map and Measuring Wheel Le manuel du propriétaire

Marque
Plott
Modèle
The First Map and Measuring Wheel
Taper
Le manuel du propriétaire

Ce manuel convient également à

CARTA
1
2
3
4
5
1
2
3
4
5
6
6
Phone Mount
Telescoping Lock
Shaft Fastener
Power Button
Kickstand
12” Measuring Wheel
Welcome to Carta
Assembling Carta
Bluetooth Operation: Carta
Step 1: Download PLOTT App
to your smartphone
(Plott-Creativity into Reality)
Step 2: Turn ON Carta
press the ON button
to start CARTA
Step 3: Connect your Carta
in the Bluetooth Device tab
in the App menu.
“THE BLUETOOTH® WORD MARK AND LOGOS ARE REGISTERED TRADEMARKS OWNED BY
BLUETOOTH SIG, INC. AND ANY USE OF SUCH MARKS BY PLOTT INC. IS UNDER LICENSE. OTH-
ER TRADEMARKS AND TRADE NAMES ARE THOSE OF THEIR RESPECTIVE OWNERS.”
BACK
Carta
BG9381
Carta App Use
Share
Send a Plott file of
your design to others
Mark
Record a measurement
and mark points on your
project
Guide Mode
Navigate to your
marked points from a
known starting point
Start
Begin measuring
Paths
Add, delete, or hide
Paths
Notes
Press and hold the
screen to add notes
Background
Take or select a
picture for scale
and context
1 2 3 4 5
7
6
1
2
3
4
5
6
7
Range* 0 - 9,999.99 m [32808.4 ft]
Accuracy ± 0.2%.
Smallest unit displayed 0.01 m [0.03 ft]
Battery 3×AA alkaline
Battery life ≥ 18 hours
Bluetooth 4.2
APP Operating System IOS & Android 5.0
Dimension (h x d x w) 100.84 x 36 x 91.78 mm [4 x 1.4 x 3.6]
Weight 1648 g [58 oz]
Storage temperature range -20˚ - 70˚C [-4˚- 158˚F]
Operating Temperature Range -10˚ - 40˚C [14˚- 104˚F]
Specifications
* Display range on APP
User Safety
WARNING:
Carefully read the Safety Instructions and Product Manual before using this
product. The person responsible for the instrument must ensure that all
users understand and adhere to these instructions.
FCC & IC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device mustaccept any interference received, including interference that
may cause undesired operation.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
1) L’appareil ne doit pas produire de brouillage;
2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
User Safety
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm
or more should be maintained between the antenna of this device and persons
during device operation.
To ensure compliance, operations at closer than this distance is not recommended.
Les antennes installées doivent être situées de facon à ce que la population ne
puisse y être exposée à une distance de moin de 20 cm. Installer les antennes
de facon à ce que le personnel ne puisse approcher à 20 cm ou moins de la
position centrale de l’ antenne. La FCC des éltats-unis stipule que cet appareil
doit être en tout temps éloigné d’au moins 20 cm des personnes pendant son
functionnement.
WARNING:
Indicates a potentially hazardous situation or an unintended use which, if not avoided, will
result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation or an unintended use which, if not avoided, may
result in minor injury and/or appreciable material, financial and environmental damage.
Important paragraphs which must be adhered to in practice as they enable the product to be
used in a technically correct and efficient manner.
RECYCLING
DO NOT dispose of this product with household waste.
ALWAYS dispose of batteries per local code.
PLEASE RECYCLE in line with local provisions for the collection and disposal of
electrical and electronic waste under the WEEE Directive.
User Safety
DECLARATION OF CONFORMITY
Carta declares that the CE Mark has been applied to this product
in accordance with the CE Marking Directive 93/68/EEC.
Battery Safety
WARNING:
Batteries can explode or leak and can cause injury or fire.
To reduce this risk:
Always follow all instructions and warnings on the battery label and package.
Always remove batteries if the device will not be used for several months
Note:
• Ensure that the correct batteries are used as recommended.
• Ensure the batteries are inserted in the correct manner, with the correct polarity.
Do Not short any battery terminals.
Do Not charge alkaline batteries.
Do Not mix old and new batteries. Replace all of them at the same time with
new batteries of the same brand and type.
Do Not mix battery chemistries.
Do Not dispose of batteries in fire
69 King St., Dover, NJ 07801 U.S.A
Tel: (973) 347-6830
Fax: (973) 347-6870
E-Mail: [email protected]m
www.LETSPLOTT.com
PLOTT
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Plott The First Map and Measuring Wheel Le manuel du propriétaire

Marque
Plott
Modèle
The First Map and Measuring Wheel
Taper
Le manuel du propriétaire
Ce manuel convient également à
Télécharger le PDF
rapport

dans d''autres langues

Autres documents