Whirlpool 400 Manuel utilisateur

A Note to You ......................... 2

Dishwasher Safety ................. 3

Parts and Features................. 4

Starting Your Dishwasher ..... 5

Loading Your Dishwasher..... 7

Using the Dispensers .......... 11

Setting the Controls............. 13

Selecting a wash cycle ..... 13

Using Cancel/Drain........... 14

Selecting cycle options ..... 15

Changing a cycle or

an option setting ............... 15

Adding a dish during

a cycle .............................. 16

Using the delay

wash cycle........................ 16

Understanding the

status indicators ............... 17

Washing Special Items ........ 18

Caring for Your

Dishwasher........................... 19

Saving Energy ...................... 22

Solving Common

Dishwashing Problems ....... 23

Troubleshooting................... 26

Requesting Assistance

or Service ........................ 27-28

Index...................................... 29

Warranty ............................... 31

*

Home Appliances

DISHWASHER MODEL SERIES 980

3376835

Use And Care

GUIDE

2

A Note to You

Thank you for buying a WHIRLPOOL* appliance.

Because your life is getting busier and more complicated, WHIRLPOOL dishwashers are

easy to use, save time, and help you manage your home better. To ensure you enjoy years

of trouble-free operation, we developed this Use and Care Guide. It contains valuable infor-

mation about how to operate and maintain your appliance properly and safely. Please read

it carefully.

Also, please complete and mail the Ownership Registration Card provided with your

appliance. This card helps us notify you about any new information on your appliance.

Please record your model’s information.

Whenever you call to request service for

your appliance, you need to know your

complete model number and serial number.

You can find this information on the model

and serial number label (see diagram on the

“Parts and Features” section for location of

label).

Please also record the purchase date of

your appliance and your dealer’s name,

address, and telephone number.

Keep this book and the sales slip together in a safe place for future reference.

Help us help you

Please:

• Have your dishwasher installed by a

qualified installer.

• Install where dishwasher is protected from

the elements.

• Install and level dishwasher on a floor that

will hold the weight, and in an area suitable

for its size and use.

• Properly connect dishwasher to electricity,

water, and drain.

†

See Installation Instructions for complete

information.

Model Number __________________________

Serial Number __________________________

Purchase Date __________________________

Dealer Name ___________________________

Dealer Address _________________________

Dealer Phone ___________________________

• Remove all shipping plugs from hoses and

connectors (such as the cap on the drain

outlet) before installing.

†

• Remove all hang tags and temporary

labels.

• Make sure dishwasher is not used by

anyone unable to operate it properly.

• Properly maintain dishwasher. See the

“Caring for Your Dishwasher” section.

3

You will be killed or seriously injured

if you don’t follow instructions.

You can be killed or seriously injured

if you don’t follow instructions.

IMPORTANT SAFETY INSTRUCTIONS

• Do not operate the dishwasher unless

all enclosure panels are properly in

place.

• Do not tamper with controls.

• Do not abuse, sit on, or stand on the

door or dish racks of the dishwasher.

• To reduce the risk of injury, do not

allow children to play in or on the

dishwasher.

• Under certain conditions, hydrogen gas

may be produced in a hot water system

that has not been used for two weeks

or more. HYDROGEN GAS IS EXPLO-

SIVE. If the hot water system has not

been used for such a period, before

using the dishwasher turn on all hot

water faucets and let the water flow

from each for several minutes. This will

release any accumulated hydrogen gas.

As the gas is flammable, do not smoke

or use an open flame during this time.

• Remove the door to the washing

compartment when removing an old

dishwasher from service or discarding it.

WARNING – When using the

dishwasher, follow basic precautions,

including the following:

• Read all instructions before using the

dishwasher.

• Use the dishwasher only for its

intended function.

• Use only detergents or rinse agents

recommended for use in a dishwasher

and keep them out of the reach of

children.

• When loading items to be washed:

1) Locate sharp items so that they

are not likely to damage the door

seal; and

2) Load sharp knives with the handles

up to reduce the risk of cut-type

injuries.

• Do not wash plastic items unless they

are marked “dishwasher safe” or the

equivalent. For plastic items not so

marked, check the manufacturer’s

recommendations.

• Do not touch the heating element

during or immediately after use.

Your safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your

appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to hazards that can kill or hurt you and others.

All safety messages will be preceded by the safety alert symbol and the

word “DANGER” or “WARNING.” These words mean:

wDANGER

wWARNING

All safety messages will identify the hazard, tell you how to reduce the chance of injury,

and tell you what can happen if the instructions are not followed.

– SAVE THESE INSTRUCTIONS –

Dishwasher Safety

4

NORMAL

LOW

ENERGY

HEAVY

POTS

-N-

PANS

HIGHHIGH

TEMPTEMP

WASHWASH

LOWLOW

ENERGYENERGY

RINSERINSE

AIR DRYAIR DRY

OPTIONS

RINSING DRYING CLEAN

CYCLES

WATER HEATINGWATER HEATINGLOCK OUTLOCK OUT

4 HOUR4 HOUR

DELAYDELAY

STARTSTART

CANCEL

DRAIN

STATUS

WASHING ADD-A-DISH

WASHWASH

LATERLATER

RINSERINSE

CHINACHINA

CRYSTALCRYSTAL

Press 5 Seconds to Press 5 Seconds to

Lock OutLock Out

or release Controls or release Controls

Top rack adjuster

(p. 10)

Upper spray arm

(p. 9)

Spray tower

(p. 9)

Fold-down divider

(p. 9)

Model and serial

number label

(on right side)

POWER CLEAN*

module

(p. 30)

Lower spray arm

(p. 9)

Overfill protector

(p. 19)

Detergent

dispensers

(p. 11)

Rinse agent

dispenser

(p. 12)

Access panel

†

Third level wash

(p. 10)

Adjustable top rack

(p. 10)

Extra-capacity

fold-down shelf

(not shown)

(p. 10)

Water inlet opening

(p. 9)

Rack bumper

(p. 9)

Bottom rack

(p. 9)

Heating element

Silverware

basket

(p. 8)

Cutlery

basket

(p. 7)

Door latch

Door color panel

†

Control panel

Your dishwasher has a row of push pads to select cycles and options. You must select a

cycle to start your dishwasher. You may select one or more options.

Parts and Features

Your dishwasher is illustrated below with the parts and features called out. To help you find

information on specific parts or features quickly, page references are included.

†

See Installation Instructions

for more information.

Status

indicators

5

SAFETY FIRST

Star

ting Your Dishwasher

This section tells you how to start or stop your dishwasher. Refer to it for quick reference.

GROUNDING INSTRUCTIONS

• For a grounded, cord connected

dishwasher:

The dishwasher must be grounded. In

the event of a malfunction or breakdown,

grounding

will reduce the risk of

electric

shock by providing a path of least

resistance for electric current. The

dishwasher is equipped with a cord

having an equipment-grounding conduc-

tor and a grounding plug. The plug must

be plugged into an appropriate outlet that

is installed and grounded in accordance

with all local codes and ordinances.

WARNING – Improper connection of

the equipment-grounding conductor can

result in a risk of electric shock.

wWARNING

Electrical Shock Hazard

Electrically ground dishwasher.

Connect ground wire to green

ground connector in terminal box.

Do not use an extension cord.

Failure to do so can result in death,

fire, or electrical shock.

Check with a qualified electrician or

service representative if you are in

doubt whether the dishwasher is

properly grounded. Do not modify the

plug provided with the dishwasher; if it

will not fit the outlet, have a proper

outlet installed by a qualified electrician.

• For a permanently connected

dishwasher:

The dishwasher must be connected to a

grounded metal, permanent wiring

system, or an equipment-grounding

conductor must be run with the circuit

conductors and connected to the

equipment-grounding terminal or lead

on the dishwasher.

– SAVE THESE INSTRUCTIONS –

wWARNING

Tip Over Hazard

Do not use dishwasher until

completely installed.

Do not push down on open door.

Doing so can result in serious injury

or cuts.

6

Starting a wash cycle

1. Load the dishwasher. See the “Loading

Your Dishwasher” section.

2. Spin the spray arms. They should

turn freely.

3. Add detergent. See the “Using

the Dispensers” section.

4. Add rinse agent, if needed.

5. Close door firmly until it latches.

Stopping the dishwasher

You can stop your dishwasher anytime

during a cycle. All you have to do is:

• Open the door slightly. Wait for any filling

or spraying action to stop before opening

the door all the way. Close door to con-

tinue cycle.

OR

• Press Cancel/Drain. Once pressed, a

2-minute drain starts.

6. Run hot water at the sink nearest the

dishwasher until water is hot.

Turn water off.

7. Press a Cycle pad. If desired, press one

or more Option pads. The

dishwasher starts filling once

you press a Cycle pad unless

you select the delay wash

cycle. You may press Option

pads as the machine is filling.

The pad indicator glows red when a cycle

or an option is selected.

STARTING YOUR DISHWASHER

7

Loading Your Dishwasher

This section tells how to properly load your dishwasher for best washing and rinsing results.

Preparing to load the dishwasher

• To save water and energy, do not rinse

dishes before putting them into the

dishwasher.

• Remove large pieces of food, bones, and

other hard items. The POWER CLEAN*

module removes food particles from the

water. The module contains a chopping

device which reduces the size of food items.

NOTE: If hard items such as fruit seeds,

nuts, and egg shells enter the POWER

CLEAN module, you might hear chopping,

grinding, crunching, or buzzing sounds.

Those sounds are normal when hard items

enter the module. Do not let metallic items

(such as pot handle screws) get into the

POWER CLEAN module. Damage can

occur.

• Foods like eggs, rice, pasta, and cooked

cereals may be hard to remove if left to dry

over a period of time. Run a Rinse/Wash

Later cycle to keep dishes moist if you do

not plan to wash them soon.

Loading the cutlery basket

Use the cutlery basket to hold long items.

Always unload or remove the cutlery basket

before unloading the racks to avoid spilling

water on the cutlery.

IMPORTANT: Remove the basket and tip

the contents onto a cutting board to unload.

This helps avoid accidents with sharp points

and edges.

To remove the cutlery basket:

1. Grasp the basket on both sides and slide

it toward the top of the door.

2. Lift the basket off the holding buttons.

To replace the cutlery basket:

1. Set the basket on the holding buttons.

2. Slide the basket toward the bottom of the

door until it locks into place.

• Load dishes so soiled surfaces face the

rotating spray arm.

• Load dishes so they are not stacked or

overlapping. It is important for the water

spray to reach all soiled surfaces for best

washing. For best drying, water must be

able to drain from all surfaces.

Loading for quiet operation

• Secure lightweight load items in the racks.

• Pot lids and handles, pizza pans, cookie

sheets, etc. should not touch interior walls,

interfere with the spray arm’s rotation, or

cover the spray tower.

• Load dishes so they do not touch one

another.

NOTE: Keep sink drain plugs inserted

during dishwasher operation to prevent

noise transfer through drains.

8

Loading the silverware basket

• Load the silverware basket while it is in the

door or take the basket out for loading on a

counter or table.

• Mix items in each section of the basket

with some pointing up and some down to

avoid nesting. Spray cannot reach nested

items.

IMPORTANT: Always load sharp items

(knives, skewers, forks, etc.) pointing

down.

• Put small items (baby bottle caps, jar lids,

etc.) in any section.

• You can also remove the basket for easy

unloading. Always unload or remove the

basket before unloading the racks to avoid

spilling water on the silverware.

To remove the basket:

1. Grab the basket by the handle and slide it

toward the top of the door.

2. Lift the basket off the holding buttons.

To replace the basket:

1. Set the basket on the holding buttons.

2. Slide the basket towards the bottom of

the door until it locks in place.

To open the basket:

• Unhook the latch as shown.

NOTE: Be sure the cover is completely

latched before pulling out the bottom rack

and before closing the dishwasher door.

LOADING YOUR DISHWASHER

9

Loading the bottom rack

Load items with cooked-on or dried-on food

in the bottom rack, with soiled surfaces

facing inward to the spray.

Mixed load

• Load plates, soup bowls, etc., between

prongs and facing inward to the spray.

• Make sure pot handles and other items do

not stop rotation of the spray arms. Spray

arms must move freely.

• Load items so they do not block or cover

the spray tower.

• Load heavily soiled cookware face down

in the rack.

• Do not stack or overlap dishes. Water

spray must reach all soiled surfaces for

best results.

Utensil load

• Load cookie sheets, cake pans, and other

large items at sides and back. Loading

such items in front may keep water spray

from reaching detergent dispenser and

silverware basket.

NOTES:

• Do not load glasses, cups, or plastic items

in the bottom rack.

• Do not load items between the bottom rack

and the side of the dishwasher tub. This

can block the water inlet opening.

• If you have removed the bottom rack for

unloading or cleaning, replace it with

bumpers in front.

Fold-down divider

Use the fold-down divider at the back of

the rack to make room for deep bowls,

roasters, etc.

Mixed load

Do not cover spray tower

Utensil load

Bumpers must

face dishwasher door

LOADING YOUR DISHWASHER

10

Loading the top rack

Load the top rack with cups, glasses, and

smaller items. Do not cover the third level

wash when loading the top rack.

Cup and glass load

• Load so open ends face down for cleaning

and draining.

• Load glasses in top rack only – bottom rack is

not designed for glasses. Damage can occur.

• Place items in the rows between prongs.

Placing them over the prongs may lead to

breakage.

• Secure lightweight items.

• China, crystal, and other delicate items

must not touch each other during dish-

washer operation. Damage may occur.

Mixed load

• Small bowls, pans, and other utensils can

be placed in the top rack.

• Load plastic items in the top rack only.

Plastic items may melt in the bottom rack.

• Wash only plastic items marked “dish-

washer safe.”

• Load plastic items so the force of the spray

does not move them during the cycle.

Extra-capacity

fold-down shelves

Use the fold-down shelves on both sides of

the top rack for extra loading space. Fold

them down over short items such as cups,

juice glasses, cereal bowls, etc.

• Adjust rack height if necessary.

• To avoid chipping, do not let stemware

touch other items.

Infinite adjustable top rack

Raise or lower the rack to fit tall items in

either the top or bottom rack. The top rack

does not have to be level.

• Turn the knob clockwise to raise a side of

the rack.

• Turn the knob counterclockwise to lower a

side of the rack.

Cup and

glass load

Do not cover third level wash

Mixed load

Raise

Lower

LOADING YOUR DISHWASHER

11

Using the Dispensers

For best washing results, review the information below. It is important to use detergents and

rinse agents properly.

Using the detergent dispenser

• Use automatic dishwashing detergent

only. Other detergents are too mild and

much too sudsy.

• Add detergent just before starting cycle.

• Store tightly closed detergent in a cool, dry

place. Fresh automatic dishwasher

detergent results in better cleaning.

Filling the detergent dispenser

The detergent dispenser has one section

with a cover and one without. Push cover

down firmly until it latches. Detergent in the

open section falls into the dishwasher when

closing the door. The covered section opens

automatically for the main wash.

NOTE: It is normal for the cover to open

partially when dispensing detergent.

Cover latchCover

Use only covered

section for:

– Low Energy

– China/Crystal

Use both sections for:

– Normal

– Heavy

– Pots-N-Pans

How much detergent to use

• The amount of detergent to use depends

on the hardness of your water and the type

of detergent. If you use too little, dishes

won’t be clean. If you use too much in soft

water, glassware will etch.

• Different brands of dishwasher detergent

have different amounts of phosphorus for

softening water. If you have hard water

and use low phosphorous content deter-

gent (6.0% or less), you may need to use

more detergent or use a detergent with a

higher phosphorous content (8.7%).

• Find out your water’s hardness by asking

your local water department, water soft-

ener company, or county extension agent.

WHERE TO FILL

Top of

3rd step

(3 tbs)

Top of

2nd step

(2 tbs)

Top of

1st step

(1 tbs)

WATER TYPE

Hard

8+ grains per gallon

136+ parts per million

Medium

5-7 grains per gallon

85-119 parts per million

Soft

0-4 grains per gallon

0-68 parts per million

Fill amounts shown are for standard

powdered detergent. Amounts may vary if

you use liquid or concentrated powdered

detergent. Follow manufacturer’s directions

when using liquid dishwasher detergent or

concentrated powdered detergent.

12

Using the rinse agent dispenser

Keep the rinse agent dispenser filled with a

liquid rinse agent. A rinse agent greatly

improves dish drying by helping water

flow off them during the last rinse. A rinse

agent also keeps water from forming

droplets and drying as spots or streaks.

A small amount of rinse agent automati-

cally releases into the rinse water during the

final rinse of each cycle. For best drying

results, check dispenser periodically to

see if it needs filling.

To check dispenser:

• Check center of Fill Indicator Cap. Clear

means it needs filling.

OR

• Remove Fill Indicator Cap. An “E” is visible

when dispenser is empty.

To fill dispenser:

The rinse agent dispenser holds 6 ounces

(175 mL). Under normal conditions, this

lasts about 3 months.

1. Open dishwasher door completely.

2. Remove Fill Indicator Cap.

3. Add rinse agent. Fill to smallest opening

in lower part of dispenser only. Overfilling

may cause rinse agent to leak out. This

will not harm the dishwasher, but could

cause oversudsing.

4. Clean up any spilled rinse agent with a

damp cloth.

5. Replace Fill Indicator Cap. Keep it closed

tightly.

NOTE: You do not have to wait until the

dispenser is empty before refilling, but do

not overfill it. Your dishwasher is designed

to use a liquid rinse agent. You do not need

to use a solid or bar-type rinse agent.

OR

“E” visible

when empty

R

I

N

S

E

A

I

D

I

N

D

I

C

A

T

O

R

Cap center clear

when empty

USING THE DISPENSERS

Keep dispenser filled for best drying results

Do not fill past

smallest opening

13

Setting the Controls

Operating your dishwasher’s controls properly helps you obtain the best possible washing

results. This section tells you how to select wash cycles and options.

Selecting a wash cycle

Press a Cycle pad. The dishwasher starts filling once you press a Cycle pad unless you

select the delay wash cycle. You may press Option pads as the machine is filling.

CYCLE

TIME

(Minutes)DRY

RINSE

MAIN

WASH

RINSEWASH

A “•” shows what each cycle includes

12••

••••60

†

••

•

60

†

•

WASH

LATER

RINSE

CHINA

CRYSTAL

LOW

ENERGY

RINSE/WASH LATER

For rinsing a few items to

be washed one or more

days later.

• Do not use detergent.

• Water is not heated

during Rinse/Wash Later.

• Air Dry is automatically selected.

CHINA/CRYSTAL

Light wash and a gentle

dry for china and crystal.

• Select High Temp

Wash to heat water in

the main wash.

• The water heats to 140°F (60°C) in

the final rinse unless you select

Low Energy Rinse.

LOW ENERGY

Single wash for prerinsed

or lightly soiled loads.

• Select High Temp

Wash to heat water in the

main wash.

• The water heats to 140°F (60°C) in

the final rinse unless you select

Low Energy Rinse.

FINAL

RINSE

†

Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher.

The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown.

continued on next page

14

NORMAL

Double wash for normal,

everyday soiled loads.

(The Energy Guide label

is based on this cycle.)

• Select High Temp

Wash to heat water in the main

wash.

• The water heats to 140°F (60°C) in

the final rinse unless you select

Low Energy Rinse.

HEAVY

Double wash for cleaning

heavily soiled loads.

• Select High Temp

Wash to heat water in

the main wash.

• The water heats to 140°F (60°C) in

the final rinse unless you select

Low Energy Rinse.

POTS-N-PANS

Double wash for maximum

cleaning of cooked-on or

baked-on foods.

• The water heats to

140°F (60°C) in both

washes.

• The water heats to 140°F (60°C) in

the final rinse unless you select

Low Energy Rinse.

CYCLE

TIME

(Minutes)

FINAL

RINSERINSE

MAIN

WASHRINSEWASH

A “•” shows what each cycle includes

66

†

NORMAL

•

HEAVY

POTS

-N-

PANS

••

•••76

†

•••

••••76

†

•

†

Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher.

The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown.

Using Cancel/Drain

Press Cancel/Drain to cancel a cycle or

clear option selections.

To cancel a cycle:

• Press Cancel/Drain while the dishwasher

is running to start a 2-minute drain. It will

take a few seconds for the drain to start.

If desired, select a new cycle. (See the

“Changing a cycle or an option setting”

section.)

CANCEL

DRAIN

SETTING THE CONTROLS

DRY

•

15

• You can press Cancel/Drain again to

stop the drain immediately. Remember

to drain the dishwasher again before

starting a new cycle.

NOTE: A small amount of water remaining

in the dishwasher is normal.

Selecting cycle options

You can press an Option pad after the

dishwasher starts as long as the cycle is not

past the point that the option is used. For

example, you can press Air Dry any time

before the Drying indicator glows.

After a wash cycle, the dishwasher

remembers the options used and uses the

same options in the next wash cycle unless

new options are selected or the Cancel/

Drain pad is pressed.

High Temp Wash

When High Temp Wash is selected, the

dishwasher heats the water during

the main wash of the China/

Crystal, Low Energy, Normal , and

Heavy cycles. Heating the water

helps improve washing results.

The Pots-N-Pans cycle automatically uses

High Temp Wash.

Changing a cycle or an option setting

During the first minute of

a cycle

1. Press new Cycle and/or Option pads.

2. Check the detergent dispensers. They

must be filled properly for the new cycle.

After the first minute of a cycle

1. Press Cancel/Drain. A 2-minute drain

cycle starts. Wait for drain cycle to finish.

2. Press a new Cycle pad.

Low Energy Rinse

When Low Energy Rinse is selected,

the dishwasher does not heat

the water during the final rinse

of China/Crystal, Low Energy,

Normal, Heavy, and Pots-N-Pans

cycles.

NOTE: Low Energy Rinse saves energy, but

dishes take longer to dry and some spotting

can occur. For best rinsing and drying

results, use a liquid rinse agent.

Air Dry

When Air Dry is selected, the air in the

dishwasher is not heated during

the “dry” portion of a cycle. Using

Air Dry helps save energy, but

dishes take longer to dry and

some spotting can occur. Some

items (such as plastics) may need towel

drying. For best drying, use a liquid rinse

agent.

NOTE: The dishwasher automatically heats

the air in the dishwasher during the “dry”

portion of the cycle unless you select

Air Dry.

AIR DRYAIR DRY

LOW

ENERGY

RINSE

SETTING THE CONTROLS

HIGH

TEMP

WASH

NORMAL

LOW

ENERGY

HEAVY

POTS

-N-

PANS

HIGHHIGH

TEMPTEMP

WASHWASH

LOWLOW

ENERGYENERGY

RINSERINSE

AIR DRYAIR DRY

OPTIONSCYCLES

WASHWASH

LATERLATER

RINSERINSE

CHINACHINA

CRYSTALCRYSTAL

3. If desired, press one or more Option pad(s).

4. Check the detergent dispensers. They

must be filled properly for the new cycle.

To clear the indicators:

Press Cancel/Drain before starting the

dishwasher to clear all cycle and option

selections.

16

SETTING THE CONTROLS

Adding items during a cycle

You can add items to the dishwasher load

anytime the Add-A-Dish

indicator is on.

1. Lift up the door latch to stop the cycle.

Wait for spraying action to stop before

opening the door.

2. Open the door and add the item.

3. Close the door, but do not latch it. Wait

30 seconds for the air in the dishwasher

to warm up. Doing so reduces the

amount of moisture in the vent when

restarting a cycle.

4. Close the door firmly until it latches. The

dishwasher resumes the cycle.

Using the delay wash cycle

Use 4 Hour Delay Start to run the dish-

washer during off-peak hours to reduce

energy usage or to reduce daytime heat

buildup in your home.

1. Close door firmly until it latches.

2. Press 4 Hour Delay Start. The pad

indicator will glow red.

3. Press a Cycle pad. The Delay Start

countdown begins when you

press the Cycle pad. If you

don’t press a Cycle pad within

30 seconds, the Delay Start

indicator turns off.

4. If desired, press one or more Option pads.

The 4 Hour Delay Start indicator stays on

until the wash cycle begins.

NOTES:

• Press 4 Hour Delay Start anytime

during the delay period to start

dishwasher immediately.

• Press Cancel/Drain to cancel the delay

cycle. The 4 Hour Delay Start

indicator will turn off. Press new

Cycle and Option pads.

• You can add items to the load anytime

during the delay countdown. After adding

items, close the door firmly until it latches.

The delay countdown will not continue if

the door is not latched.

ADD-A-DISH

4 HOUR4 HOUR

DELAY

START

4 HOUR4 HOUR

DELAY

START

CANCELCANCEL

DRAINDRAIN

17

Understanding the status indicators

Lock Out

The Lock Out feature lets you lock out the

function of the control

pads. When using Lock

Out, you cannot start

the dishwasher.

To use Lock Out:

• Press and hold Air Dry (about 5 seconds)

until the Lock Out indicator glows.

To turn off Lock Out:

• Press and hold Air Dry (about 5 seconds)

until the Lock Out indicator turns off.

Washing

The Washing indicator glows at the start

of the first fill of any cycle

(except Rinse/Wash

Later) and remains

on until the end of the

main wash.

Water Heating

The Water Heating indicator glows when-

ever water is heated

during a cycle.

AIR DRYAIR DRY

WASHING

WATER HEATINGWATER HEATING

Rinsing

The Rinsing indicator glows during the

last two rinses of all

cycles.

Drying

The Drying indicator glows during the

drying portion of each

cycle – even if you select

Air Dry. It turns off at

the end of the cycle. If

dishes are not as dry as you expected when

using Air Dry, either allow longer drying

times (overnight) or do not use Air Dry.

Add-A-Dish

The Add-A-Dish indicator glows as soon

as the dishwasher starts

and keeps glowing until

the main wash portion of

the cycle begins. You

can add an additional item while the indica-

tor is on.

Clean

The Clean indicator glows at the end of a

cycle to show that the

load is clean. All other

indicators turn off. The

Clean indicator glows

until you press Cancel/Drain or any other

control pad.

RINSING

DRYING

CLEAN

ADD-A-DISH

SETTING THE CONTROLS

LOCK OUTLOCK OUT

18

Washing Special Items

If you have any doubts about washing a particular piece of dishware, check with the

manufacturer to see if it is dishwasher safe.

DISHWASHER SAFE?

Yes

No

Yes

No

Yes

No

Yes

No

MATERIAL

Aluminum

Bottles

and Cans

Cast Iron

China/

Stoneware

Crystal

Gold

Glass

Hollow-

Handle

Knives

Pewter

Disposable

Plastics

Stainless

Steel

Sterling Silver

or Silver Plate

Tin

Wooden

Ware

EXCEPTIONS/SPECIAL INFORMATION

High water temperature and detergents can pit

finish of anodized aluminum.

Wash bottles and cans by hand. Labels attached

with glue can loosen in your dishwasher. Loose

labels and glue can clog spray arms or the pump

and will reduce washing performance.

Seasoning will be removed and iron will rust.

Always check manufacturer’s recommendations

before washing. Antique, hand-painted, or over-

the-glaze patterns may fade. Gold leaf can

discolor or fade.

Always check manufacturer’s recommendations

before washing. Some types of leaded crystal

can etch with repeated washings.

Gold-colored flatware will discolor.

Milk glass will yellow with repeated dishwasher

washing.

Handles of some knives are attached to the

blade with adhesives which may loosen if

washed in the dishwasher.

High water temperatures and detergent can

discolor or pit finish.

Cannot withstand high water temperatures

and detergents.

Always check manufacturer’s recommendations

before washing. Plastics vary in their capacity to

withstand high water temperatures and deter-

gents. Load plastics in top rack only.

Run the Rinse/Wash Later cycle if not washing

immediately. Prolonged contact with food

containing salt, vinegar, milk products, or fruit

juice can damage finish.

Run the Rinse/Wash Later cycle if not washing

immediately. Prolonged contact with food

containing salt, acid, or sulfide (eggs, mayon-

naise, and seafood) can damage finish.

Can rust.

Always check manufacturer’s recommendations

before washing. Untreated wood can warp,

crack, or lose its finish.

19

Caring for Your Dishwasher

Your new dishwasher is designed to give you many years of dependable service. There

are a few things you can do to maintain your dishwasher properly. This section tells you

how to clean and care for your dishwasher. Refer to the “Solution chart” for special cleaning

problems. See Installation Instructions for information on storing your dishwasher and for

cleaning the drain air gap.

Cleaning the exterior

In most cases, regular use of a soft, damp

cloth or sponge and a mild detergent is all

that is necessary to keep the outside of your

dishwasher nice looking and clean.

Cleaning the interior

Hard water minerals may cause a white film

to build up on the inside surfaces, especially

just beneath the door area.

To clean interior:

• Apply powdered dishwasher detergent to a

damp sponge to make a paste.

OR

• Use liquid automatic dishwasher detergent

and clean with damp sponge.

Do not clean the dishwasher interior until it

has cooled.

Wear rubber gloves. Do not use any type of

cleanser other than dishwasher detergent

because it can cause foaming or sudsing.

NOTE: See “Removing spots and film” in

the “Solving Common Dishwashing Prob-

lems” section to clean your dishwasher with

white vinegar. Remember, this procedure is

intended for occasional use only. Vinegar

is an acid. Excessive use can damage your

dishwasher.

Overfill protector

The overfill protector (in the front right corner

of the dishwasher tub) keeps the dishwasher

from overfilling. It must be in place for the

dishwasher to operate.

Check under the float for objects that may

keep the protector from moving up or down.

20

Storing your dishwasher

Moving or winterizing your

dishwasher

Protect your dishwasher and home against

water damage due to freezing water lines. If

your dishwasher is left in a seasonal dwell-

ing or could be exposed to near freezing

temperatures, have a qualified person do

the following:

NOTE: Pump motor styles vary by model.

Refer to Figure 1 or Figure 2, depending on

the style of your dishwasher.

1. Disconnect power supply to the

dishwasher.

2. Turn off water supply to the dishwasher.

3. Remove the 4 screws on the lower

access panel and remove the lower

access panel.

4. Place a shallow pan under the water

supply valve. Then, use a wrench to

disconnect the water inlet from the water

supply valve. Separate the water inlet

from the water supply valve and drain

water into the pan.

5. Remove the spring clamp from the water

outlet and separate from the water

supply valve; drain water into pan.

6. Reconnect both water inlet and water

outlet to the water supply valve.

7. Empty the pan and reposition it under

the water pump.

8. Remove the clamp and disconnect the

drain hose from the water pump; drain

water into pan.

9. Reconnect drain hose to the water

pump, being sure to position the clamp

over the connection.

10. Replace the lower access panel.

CARING FOR YOUR DISHWASHER

Spring

clamp

Drain

hose

Water

inlet

Water outlet

Water supply

valve

Spring

clamp

Water pump

and motor

Drain

hose

Figure 2

Water outlet

Water

inlet

Water supply

valve

Water pump

and motor

Figure 1

La page charge ...

Whirlpool 400 Manuel utilisateur

Ce manuel convient également à

Whirlpool 400 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents