Whirlpool 980 Manuel utilisateur

Use And Care

A Note to You..........................2

Dishwasher Safety..................3

Parts and Features..................4

Starting Your Dishwasher ......6

Loading Your Dishwasher......8

Using the Dispensers............12

Setting the Controls..............14

Selecting a wash cycle......14

Using Cancel/Drain............16

Selecting cycle options......16

Changing a cycle or

option setting......................17

Adding items

during a cycle ....................17

Using Delay Hours ............18

Understanding the

status indicators..................19

Washing Special Items..........20

Caring for Your

Dishwasher............................21

Saving Energy........................23

Solving Common

Dishwashing Problems ........24

Troubleshooting....................27

Requesting Assistance

or Service ..............................28

Warranty ................................32

8051225 www.whirlpool.com

DISHWASHER MODEL SERIES 925, 940, 980

GU I D E

8051225 v06 EN (c28) 10/6/98 9:46 AM Page 1

A Note to You

Thank you for buying a WHIRLPOOL

®

appliance.

The Whirlpool Brand is committed to designing quality products that consistently perform for

you to make your life easier. To ensure you enjoy years of trouble-free operation, we devel-

oped this Use and Care Guide. It contains valuable information about how to operate and

maintain your appliance properly and safely. Please read it carefully.

Also, please complete and mail the Ownership Registration Card provided with your

appliance. This card helps us notify you about any new information on your appliance.

Please record your model’s information.

Whenever you call to request service for

your appliance, you need to know your

complete model number and serial number.

You can find this information on the model

and serial number label (see the “Parts and

Features” section).

Please also record the purchase date of

your appliance and your dealer’s name,

address, and telephone number.

Keep this book and the sales slip together in a safe place for future reference.

To find detailed product information, the location of the nearest Whirlpool dealer or authorized

servicer, to purchase an accessory item, or register your appliance on-line, please visit our

Web site at www.whirlpool.com

In Canada visit our Web site at www.whirlpool.com/canada

Help us help you

Please:

• Have your dishwasher installed by a

qualified installer.

• Install where dishwasher is protected from

the elements.

• Install and level dishwasher on a floor that

will hold the weight, and in an area suitable

for its size and use.

• Properly connect dishwasher to electricity,

water, and drain.*

* See Installation Instructions for complete

information.

Our Consumer Assistance

Center number is toll free.

2

• Remove all shipping plugs from hoses and

connectors (such as the cap on the drain

outlet) before installing.*

• Remove all hang tags and temporary

labels.

• Make sure dishwasher is not used by

anyone unable to operate it properly.

• Properly maintain dishwasher. See the

“Caring for Your Dishwasher” section.

Model Number __________________________

Serial Number __________________________

Purchase Date __________________________

Dealer Name ____________________________

Dealer Address__________________________

Dealer Phone____________________________

In Canada, for assistance or service, see the “Requesting

Assistance or Service” section.

1-800-253-1301

8051225 v06 EN (c28) 10/6/98 9:46 AM Page 2

Your safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your

appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to hazards that can kill or hurt you and others.

All safety messages will be preceded by the safety alert symbol and the

word “DANGER” or “WARNING.” These words mean:

3

You will be killed or seriously injured

if you don’t follow instructions.

You can be killed or seriously injured

if you don’t follow instructions.

IMPORTANT SAFETY INSTRUCTIONS

• Do not operate the dishwasher unless

all enclosure panels are properly in

place.

• Do not tamper with controls.

• Do not abuse, sit on, or stand on the

door or dish racks of the dishwasher.

• To reduce the risk of injury, do not

allow children to play in or on the

dishwasher.

• Under certain conditions, hydrogen gas

may be produced in a hot water system

that has not been used for two weeks

or more. HYDROGEN GAS IS EXPLO-

SIVE. If the hot water system has not

been used for such a period, before

using the dishwasher turn on all hot

water faucets and let the water flow

from each for several minutes. This will

release any accumulated hydrogen gas.

As the gas is flammable, do not smoke

or use an open flame during this time.

• Remove the door to the washing

compartment when removing an old

dishwasher from service or discarding it.

WARNING – When using the

dishwasher, follow basic precautions,

including the following:

• Read all instructions before using the

dishwasher.

• Use the dishwasher only for its

intended function.

• Use only detergents or rinse agents

recommended for use in a dishwasher

and keep them out of the reach of

children.

• When loading items to be washed:

1) Locate sharp items so that they

are not likely to damage the door

seal; and

2) Load sharp knives with the handles

up to reduce the risk of cut-type

injuries.

• Do not wash plastic items unless they

are marked “dishwasher safe” or the

equivalent. For plastic items not so

marked, check the manufacturer’s

recommendations.

• Do not touch the heating element

during or immediately after use.

wDANGER

wWARNING

All safety messages will identify the hazard, tell you how to reduce the chance of injury,

and tell you what can happen if the instructions are not followed.

– SAVE THESE INSTRUCTIONS –

Dishwasher Safety

8051225 v06 EN (c28) 10/6/98 9:46 AM Page 3

Fold-down tines

(on some models)

(p. 11)

Upper spray arm

(p. 11)

Fold-down divider

(on some models)

(p. 10)

Model and serial

number label

(on right side)

Lower spray arm

(p. 10)

POWER CLEAN

TM

filter module

(p. 30)

Overfill protector

(p. 21)

Detergent

dispensers

(p. 12)

Rinse agent

dispenser

(p. 13)

4

Parts and Features

Top spray

(p. 30)

Extra-capacity

fold-down shelf

(on some models,

not shown)

(p. 11)

Water inlet opening

(p. 10)

Bottom rack

(p. 10)

Rack bumper

(p. 10)

Heating element

Silverware

basket

(p. 9)

Cutlery basket

(on some models)

(p. 8)

Door color panel

*

This manual covers several different models. The dishwasher you have purchased may

have some or all of the parts and features listed below.

*See Installation Instructions

for more information.

8051225 v06 EN (c28) 10/6/98 9:46 AM Page 4

Press 5 Seconds to

Lock/Unlock controls

AIR DRY

CONTROLS

LOCKED

WASHING

WATER

HEATING

RINSING

DRYING

CLEAN

WA

S

H

C

Y

C

L

ES

POWER

SCOUR

CYCLE STATUS

OPTIONS

CHINA

RINSE

ONLY

LOW

ENERGY

NORMAL

HEAVY

POTS

-N-

PANS

DELAY

HOURS

2

4

6

CANCEL

DRAIN

CONTROLS

LOCKED

WASHING

ADD-

A-DISH

WATER

HEATING

RINSING

DRYING

CLEAN

WA

S

H

C

Y

C

L

ES

OPTIONS

DELAY

HOURS

2

4

6

CHINA

RINSE

ONLY

LOW

ENERGY

NORMAL

HEAVY

POTS

-N-

PANS

AIR DRY

POWER

SCOUR

QUICK

WASH

SANI

RINSE

Press 5 Seconds to

Lock/Unlock controls

CANCEL

DRAIN

CYCLE STATUS

Press 5 Seconds to

Lock/Unlock controls

AIR DRY

CONTROLS

LOCKED

WASHING

WATER

HEATING

RINSING

DRYING

CLEAN

WA

S

H

C

Y

C

L

ES

CYCLE STATUS

OPTIONS

HIGH

TEMP

WASH

DELAY

HOURS

42

6

RINSE

ONLY

NORMAL

HEAVY

POTS

-N-

PANS

LOW

ENERGY

CHINA

CANCEL

DRAIN

5

PARTS AND FEATURES

Cycle status indicatorsCycle selector pads Option selector pads

Cycle status indicators

Cycle selector pads Option selector pads

Cycle status indicatorsCycle selector pads Option selector pads

Series 925 model

Series 940 model

Series 980 model

8051225 v06 EN (c28) 10/6/98 9:46 AM Page 5

6

Starting Your Dishwasher

wWARNING

Electrical Shock Hazard

Electrically ground dishwasher.

Connect ground wire to green ground

connector in terminal box.

Do not use an extension cord.

Failure to follow these instructions

can result in death, fire, or

electrical shock.

wWARNING

Tip Over Hazard

Do not use dishwasher until

completely installed.

Do not push down on open door.

Doing so can result in serious injury

or cuts.

GROUNDING INSTRUCTIONS

• For a grounded, cord connected

dishwasher:

The dishwasher must be grounded. In

the event of a malfunction or breakdown,

grounding

will reduce the risk of

electric

shock by providing a path of least

resistance for electric current. The

dishwasher is equipped with a cord

having an equipment-grounding conduc-

tor and a grounding plug. The plug must

be plugged into an appropriate outlet that

is installed and grounded in accordance

with all local codes and ordinances.

WARNING – Improper connection of

the equipment-grounding conductor can

result in a risk of electric shock.

Check with a qualified electrician or

service representative if you are in

doubt whether the dishwasher is

properly grounded. Do not modify the

plug provided with the dishwasher; if it

will not fit the outlet, have a proper

outlet installed by a qualified electrician.

• For a permanently connected

dishwasher:

The dishwasher must be connected to

a grounded metal, permanent wiring

system, or an equipment-grounding

conductor must be run with the circuit

conductors and connected to the

equipment-grounding terminal or lead

on the dishwasher.

– SAVE THESE INSTRUCTIONS –

8051225 v06 EN (c28) 10/6/98 9:46 AM Page 6

7

1. Load the dishwasher. See the “Loading

Your Dishwasher” section.

2. Spin the spray arms. They should turn

freely.

3. Add detergent. See the “Using the

Dispensers” section.

4. Add rinse agent, if needed.

5. Close door firmly until it latches.

Stopping the dishwasher

You can stop your dishwasher anytime

during a cycle. All you have to do is:

• Open the door slightly. Wait for any filling

or spraying action to stop before opening

the door all the way. Close the door to

continue the cycle.

6. Run hot water at the sink nearest the

dishwasher until water is hot.

Turn off water.

7. Press a Cycle pad. If desired, press one

or more Option pads. The

dishwasher starts filling once

you press a Cycle pad unless

you select the delay wash

cycle. You may press Option

pads as the machine is filling.

The pad indicator glows red

when a cycle or an option is

selected.

Starting a wash cycle

OR

• Press Cancel/Drain. Once pressed, a

2-minute drain starts.

STARTING YOUR DISHWASHER

8051225 v06 EN (c28) 10/6/98 9:46 AM Page 7

8

Preparing to load the dishwasher

• To save water and energy, do not rinse

dishes before putting them into the

dishwasher.

• Remove large pieces of food, bones, and

other hard items. The POWER CLEAN

TM

filter module removes food particles from

the water. The module contains a chopping

device which reduces the size of food

items.

NOTE: If hard items such as fruit seeds,

nuts, and egg shells enter the

POWER CLEAN filter module, you might

hear chopping, grinding, crunching, or

buzzing sounds. Those sounds are normal

when hard items enter the module. Do not

let metallic items (such as pot handle

screws) get into the POWER CLEAN filter

module. Damage can occur.

• Foods like eggs, rice, pasta, and cooked

cereals may be hard to remove if left to

dry over a period of time. Run a Rinse

Only cycle to keep dishes moist if you do

not plan to wash them soon.

Loading the cutlery basket

(on some models)

Use the cutlery basket to hold long items.

Always unload or remove the cutlery basket

before unloading the racks to avoid spilling

water on the cutlery.

IMPORTANT: Remove the basket and tip

the contents onto a cutting board to unload.

This helps avoid accidents with sharp points

and edges.

To remove the cutlery basket:

1. Grasp the basket on both sides and slide

it toward the top of the door.

2. Lift the basket off the holding buttons.

To replace the cutlery basket:

1. Set the basket on the holding buttons.

2. Slide the basket toward the bottom of the

door until it locks into place.

• Load dishes so soiled surfaces face the

rotating spray arm.

• Load dishes so they are not stacked or

overlapping. It is important for the water

spray to reach all soiled surfaces for best

washing. For best drying, water must be

able to drain from all surfaces.

Loading for quiet operation

• Secure lightweight load items in the racks.

• Pot lids and handles, pizza pans, cookie

sheets, etc. should not touch interior walls

or interfere with the spray arm’s rotation.

• Load dishes so they do not touch one

another.

NOTE: Keep sink drain plugs inserted

during dishwasher operation to prevent

noise transfer through drains.

Loading Your Dishwasher

8051225 v06 EN (c28) 10/6/98 9:46 AM Page 8

9

Loading the silverware basket

• Load the silverware basket while it is in

the door or take the basket out for loading

on a counter or table.

• Mix items in each section of the basket

with some pointing up and some down to

avoid nesting. Spray cannot reach nested

items. Load spoons with baked on food

pointing up.

IMPORTANT: Always load sharp items

(knives, skewers, forks, etc.) pointing

down.

• Put small items (baby bottle caps, jar lids,

etc.) in the section with the lid.

• You can also remove the basket for easy

unloading. Always unload or remove the

basket before unloading the racks to avoid

spilling water on the silverware.

NOTE: The basket may be hung on the

door or on the bottom rack. It can also be

placed inside the bottom rack.

To remove the basket:

1. Grab the basket by the handle and slide

it toward the top of the door.

2. Lift the basket off the holding buttons.

To replace the basket:

1. Set the basket on the holding buttons.

2. Slide the basket towards the bottom of

the door until it locks in place.

To open the basket:

• Unhook the latch as shown.

NOTE: Be sure the cover is completely

latched before pulling out the bottom rack

and before closing the dishwasher door.

or

LOADING YOUR DISHWASHER

or

8051225 v06 EN (c28) 10/6/98 9:46 AM Page 9

LOADING YOUR DISHWASHER

10

Loading the bottom rack

Load items with cooked-on or dried-on food

in the bottom rack, with soiled surfaces

facing inward to the spray.

Mixed load

• Load plates, soup bowls, etc., between

prongs and facing inward to the spray.

• Make sure pot handles and other items do

not stop rotation of the spray arm. Spray

arm must move freely.

• Load heavily soiled cookware face down

in rack.

• Do not stack or overlap dishes. Water

spray must reach all soiled surfaces for

best results.

Utensil load

• Load cookie sheets, cake pans, and other

large items at sides and back. Loading

such items in front may keep water spray

from reaching detergent dispenser and

silverware basket.

NOTES:

• Do not load glasses, cups, or plastic items

in the bottom rack.

• Do not load items between the bottom rack

and the dishwasher tub. This can block

the water inlet opening.

• If you have removed the bottom rack for

unloading or cleaning, replace it with

bumpers in front.

Fold-down dividers

(on some models)

Fold-down dividers at the back of the rack

can be lowered to make room for deep

bowls, roasters, and other large items.

Mixed load

12 place setting load

Utensil load

Bumpers must face

dishwasher door

8051225 v06 EN (c28) 10/6/98 9:46 AM Page 10

Loading the top rack

The top rack is designed for cups, glasses,

and smaller items.

Cup and glass load

• Load so open ends face down for

cleaning and draining.

• Load glasses in top rack only – bottom

rack is not designed for glasses. Damage

can occur.

• Place items in the rows between prongs.

Placing them over the prongs can lead

to breakage.

• Secure lightweight items.

• China, crystal, and other delicate items

must not touch each other during dish-

washer operation. Damage can occur.

Mixed load

• Small bowls, pans, and other utensils can

be placed in the top rack.

• Load plastic items in the top rack only.

Plastic items can melt in the bottom rack.

• Wash only plastic items marked

“dishwasher safe.”

• Load plastic items so the force of the

spray does not move them during the

cycle.

Fold-down tines

(on some models)

Fold down tines in the top rack to

accommodate larger items.

Extra-capacity fold-down

shelves

(on some models)

Fold down the extra shelves on the top rack

to hold items such as cups, juice glasses

and cereal bowls.

11

Cup and glass load

Mixed load

LOADING YOUR DISHWASHER

12 place setting

8051225 v06 EN (c28) 10/6/98 9:47 AM Page 11

12

• Use automatic dishwashing detergent

only. Other detergents are too mild and

much too sudsy.

• Add detergent just before starting cycle.

• Store tightly closed detergent in a cool, dry

place. Fresh automatic dishwasher

detergent results in better cleaning.

Using the Dispensers

Using the detergent dispenser

How much detergent to use

• The amount of detergent to use depends on the hardness of your water and the type of

detergent. If you use too little, dishes won’t be clean. If you use too much in soft water,

glassware will etch.

• Find out your water’s hardness by asking your local water department, water softener

company, or county extension agent.

NOTE: Fill amounts shown are for standard powdered detergent. Amounts may vary if you

use liquid or concentrated powdered detergent. Follow instructions on the package when

using liquid dishwasher detergent or concentrated powdered detergent.

Filling the detergent dispenser

The detergent dispenser has one section

with a cover and one without. Push the

cover down firmly until it latches. Detergent

in the open section falls into the dishwasher

when closing the door. The covered section

opens automatically for the main wash. It is

normal for the cover to open partially when

dispensing detergent.

NOTE: Use both sections for cycles with

two washes. Use only the covered section

for cycles with one wash. See the cycles

chart for more details.

AMOUNT OF DETERGENT

For normal loads:

• Partially fill the Main Wash section (2 tablespoons or 30 grams)

• Fill the Pre-Wash section (2 tablespoons or 30 grams)

NOTE: Add only 1 tablespoon or 15 grams of detergent to the

Pre-Wash section if dishes are prerinsed or water is very soft.

For baked on soil loads:

• Fill the Main Wash section (2 tablespoons or 30 grams)

• Fill the Pre-Wash section (2 tablespoons or 30 grams)

For heavily soiled loads:

• Fill the Main Wash section (3 tablespoons or 45 grams)

• Fill the Pre-Wash section (2 tablespoons or 30 grams)

For normal and heavily soiled loads:

• Fill the Main Wash section (3 tablespoons or 45 grams)

• Fill the Pre-Wash section (2 tablespoons or 30 grams)

WATER HARDNESS

Soft to Medium Hard Water

0 to 6 grains per gallon

Medium to Hard Water

7 to 12 grains per gallon

Pre-wash

section

Cover latch

Cover

Main wash

section

8051225 v06 EN (c28) 10/6/98 9:47 AM Page 12

13

Using the rinse agent dispenser

Keep the rinse agent dispenser filled with a

liquid rinse agent. A rinse agent greatly

improves dish drying by helping water

flow off during the last rinse. A rinse

agent also keeps water from forming

droplets and drying as spots or streaks.

A small amount of rinse agent automatically

releases into the rinse water during the final

rinse of each cycle. For best drying

results, check dispenser periodically to

see if it needs filling.

To check dispenser:

• Check center of Fill Indicator Cap. Clear

means it needs filling.

OR

• Remove Fill Indicator Cap. An “E” is visible

when dispenser is empty.

To fill dispenser:

The rinse agent dispenser holds 6 ounces

(175 mL). Under normal conditions, this

lasts about 3 months.

1. Open dishwasher door completely.

2. Remove Fill Indicator Cap.

3. Add rinse agent. Fill to smallest opening

in lower part of dispenser only. Overfilling

may cause rinse agent to leak out. This

will not harm the dishwasher, but could

cause oversudsing.

4. Clean up any spilled rinse agent with

a damp cloth.

5. Replace Fill Indicator Cap. Keep it

closed tightly.

NOTE: You do not have to wait until the

dispenser is empty before refilling, but do

not overfill it. Your dishwasher is designed

to use a liquid rinse agent. You do not need

to use a solid or bar-type rinse agent.

USING THE DISPENSERS

“E” visible

when empty

R

I

N

S

E

A

I

D

I

N

D

I

C

A

T

O

R

Cap center clear

when empty

Do not fill past

smallest opening

Keep dispenser filled for best drying results

8051225 v06 EN (c28) 10/6/98 9:47 AM Page 13

RINSE ONLY

For rinsing a few

items to be

washed one or

more days later.

• Do not use detergent.

• Water is not heated during

Rinse Only.

• Air Dry is automatically

selected.

QUICK WASH

A single wash for

quick cleaning.

• The water heats

to 140°F (60°C) in the final

rinse.

CHINA

Light wash and a

gentle dry for china

and crystal.

LOW ENERGY

Single wash for

prerinsed or

lightly soiled loads.

• The water heats

to 140°F (60°C) in the final

rinse.

14

67*

•

6.9

•

Setting the Controls

Selecting a wash cycle

Press a Cycle pad. The dishwasher starts

filling once you press a Cycle pad, unless

you select the delay wash. You can press

Option pads as the machine is filling.

NOTE: Your model may have some or all of

the cycles shown.

For Series 980 models:

Your electronic dishwasher senses the soil

A “•” shows what each cycle includes

FINAL

RINSE

MAIN

WASH

RINSE

CYCLE

TIME

(Minutes)

RINSE

DRY

CYCLE

WASH

WATER

USE

(gallons)

19

•

4.3

* Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher and

soil level on the dishes. The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle

times will be as shown.

70*

•

4.8

67*

•

6.9

•

RINSE

ONLY

QUICK

WASH

CHINA

LOW

ENERGY

level on your dishes. Soil level determines

the length of some cycles, the amount of

heat added to a wash or rinse, and the

cycle needed for a load.

Cycle time depends upon the soil on the

dishes, and water usage may be higher for

large amounts of soil.

8051225 v06 EN (c28) 10/6/98 9:47 AM Page 14

15

SETTING THE CONTROLS

A “•” shows what each cycle includes

FINAL

RINSE

MAIN

WASH

RINSE

CYCLE

TIME

(Minutes)

RINSE

DRY

CYCLE

WASH

WATER

USE

(gallons)

* Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher

and soil level on the dishes. The cooler the water, the longer the cycle time. If the water is already hot enough, the

cycle times will be as shown.

LOW ENERGY/CHINA

Single wash for

prerinsed, lightly

soiled, china or

crystal loads.

• The water heats to 140°F

(60°C) in the final rinse.

NORMAL

Double wash for

normal, everyday

soiled loads. (The

Energy Guide

label is based on this cycle.)

• If you have used the Pots-N-

Pans or the Heavy cycle,

press Rinse Only before

selecting Normal.

• The water heats to 140°F

(60°C) in the final rinse.

HEAVY

Double wash for

cleaning heavily

soiled loads.

• The water heats

to 140°F (60°C) in both

washes and the final rinse.

POTS-N-PANS

An extended

double wash for

maximum

cleaning of

heavily-soiled

dishes, pots and pans.

• The water heats to 140°F

(60°C) in both washes and

the final rinse.

89*

•

10.8

•

84*

•

10.8

•

70*

•

6.9

•

HEAVY

POTS

-N-

PANS

NORMAL

LOW

ENERGY

CHINA

67*

•

6.9

•

8051225 v06 EN (c28) 10/6/98 9:47 AM Page 15

SANI RINSE

TM

option

(on some models)

Selecting the SANI RINSE option raises the

water temperature in the final

rinse to 150°F (65°C). SANI

RINSE is an option with the

Pots-N-Pans, Heavy, Normal,

Low Energy and China cycles. Depending

on the incoming temperature of your water,

cycle times might be longer when you select

SANI RINSE.

NOTE: SANI RINSE raises the temperature

of the final rinse to 150°F (65°C), and main-

tains that temperature 9 minutes. This high

temperature rinse sanitizes your dishes and

glassware.

Air Dry

When Air Dry is selected, the air in the

dishwasher is not heated during

the “dry” portion of a cycle. Using

Air Dry helps save energy, but

dishes take longer to dry and

some spotting can occur. Some items (such

as plastics) may need towel drying. For best

drying, use a liquid rinse agent.

NOTE: The dishwasher automatically heats

the air in the dishwasher during the “dry”

portion of the cycle unless you select Air Dry.

16

SETTING THE CONTROLS

Using Cancel/Drain

Press Cancel/Drain to cancel a cycle or

clear option selections.

To cancel a cycle:

• Press Cancel/Drain while the dishwasher

is running to start a 2-minute drain. It will

take a few seconds for the drain to start. If

desired, select a new cycle. (See the

“Changing a cycle or an option setting”

section.)

CANCEL

DRAIN

SANI

RINSE

AIR DRY

Selecting cycle options

You can press an Option pad after the

dishwasher starts as long as the cycle is

not past the point that the option is used.

For example, you can press Air Dry any

time before the Drying indicator glows.

After a wash cycle, the dishwasher remem-

bers the options used and uses the same

options in the next wash cycle unless new

options are selected or the Cancel/Drain

pad is pressed.

POWER SCOUR

TM

feature

(on some models)

When POWER SCOUR is selected the dish-

washer heats the water during

several portions of the Normal,

Heavy, and Pots-N-Pans cycles.

Heating the water helps improve

washing results. The Pots-N-

Pans cycle, with POWER SCOUR is

recommended for baked-on soil.

High Temp Wash

(on some models)

When High Temp Wash is selected, the

dishwasher heats the water to

140°F (60°C) during the main

wash of the Low Energy,

China, Normal and Heavy

cycles. Heating the water helps improve

washing results. The Pots-N-Pans cycle

automatically uses High Temp washes.

POWER

SCOUR

HIGH

TEMP

WASH

• You can press Cancel/Drain again to stop

the drain immediately. Remember to drain

the dishwasher again before starting a

new cycle.

NOTE: A small amount of water remaining

in the dishwasher is normal.

To clear the cycle indicators:

Press Cancel/Drain before starting the

dishwasher.

8051225 v06 EN (c28) 10/6/98 9:47 AM Page 16

17

SETTING THE CONTROLS

Changing a cycle or option setting

During the first minute of a cycle

1. Press new Cycle and/or Option pads.

2. Check the detergent dispensers. They

must be filled properly for the new cycle.

After the first minute of a cycle

1. Press Cancel/Drain. A 2-minute drain

cycle starts. Wait for drain cycle to finish.

2. Press a new Cycle pad.

3. If desired, press one or more Option pad(s).

4. Check the detergent dispensers. They

must be filled properly for the new cycle.

Adding items during a cycle

1. Lift up the door latch to stop the cycle.

Wait for spraying action to stop before

opening the door.

2. Open the door and add the item.

3. Close the door, but do not latch it. Wait

30 seconds for the air in the dishwasher

to warm up. Doing so reduces the

amount of moisture in the vent when

restarting a cycle.

4. Close the door firmly until it latches. The

dishwasher resumes the cycle.

For series 925 and 940 models:

You can add an additional item to the dish-

washer anytime before the main portion of a

cycle. See the “Selecting a wash cycle”

chart.

For series 980 model:

You can add items to the dishwasher load

anytime the Add-A-Dish indi-

cator is on.

ADD-

A-DISH

8051225 v06 EN (c28) 10/6/98 9:47 AM Page 17

18

Using Delay Hours

Use a delayed start to run the dishwasher

during off-peak hours to reduce energy

usage or to reduce daytime heat buildup in

your home.

1. Close door firmly until it latches.

2. Press the Delay Hours pad once for a

2-hour delay start, twice for 4

hours, or three times for 6

hours. The indicator will glow.

3. Press a Cycle pad. The Delay Start

countdown begins when you

press the Cycle pad. If you

don’t press a Cycle pad within

30 seconds, the Delay Hours

indicator turns off.

4. If desired, press one or more Option

pads.

The Delay Hours indicator

stays on until the wash cycle

begins.

To cancel delay and start the

dishwasher:

1. Press Delay Hours until the 6 glows.

2. Press Delay Hours one

more time. The delayed cycle

starts.

To cancel delay and cycle:

1. Press Cancel/Drain. The Delay Hours

indicator will turn off.

2. Press new Cycle and Option

pads.

NOTE: You can add items to the load any-

time during the delay countdown. After

adding items, close the door firmly until it

latches. The delay countdown will not con-

tinue if the door is not latched.

SETTING THE CONTROLS

DELAY

HOURS

2

4

6

CANCEL

DRAIN

DELAY

HOURS

2

4

6

DELAY

HOURS

2

4

6

8051225 v06 EN (c28) 10/6/98 9:47 AM Page 18

19

Understanding the status indicators

Washing

The Washing indicator glows at the start of

the first fill of any cycle

(except Rinse Only) and

remains on until the end

of the main wash.

Add-A-Dish

(on some models)

The Add-A-Dish indicator glows as soon as

the dishwasher starts and

keeps glowing until the main

wash portion of the cycle

begins. You can add an

additional item while the indicator is on.

Water Heating

The Water Heating indicator glows when-

ever water is heated

during a cycle.

Rinsing

The Rinsing indicator glows during the last

two rinses of all cycles.

WASHING

Drying

The Drying indicator glows during the

drying portion of each

cycle – even if you select

Air Dry. It turns off at

the end of the cycle. If

dishes are not as dry as you expected when

using Air Dry, either allow longer drying

times (overnight) or do not use Air Dry.

Clean

The Clean indicator glows at the end of a

cycle to show that the

load is clean. All other

indicators turn off. The

Clean indicator glows until

you open the door or press Cancel/Drain or

any other control pad.

Controls Locked

The Controls Locked feature lets you lock

the control pads. When

the controls are locked,

you cannot start the

dishwasher.

To lock controls:

• Press and hold Air Dry (about 5

seconds) until the Controls Locked

indicator glows.

To unlock controls:

• Press and hold Air Dry (about 5 seconds)

until the Controls Locked indicator turns

off.

RINSING

DRYING

CLEAN

CONTROLS CONTROLS

LOCKED

WATER WATER

HEATING

AIR DRYAIR DRY

SETTING THE CONTROLS

ADD-

A-DISH

8051225 v06 EN (c28) 10/6/98 9:47 AM Page 19

EXCEPTIONS/SPECIAL INFORMATION

High water temperature and detergents can pit

finish of anodized aluminum.

Wash bottles and cans by hand. Labels attached

with glue can loosen in your dishwasher. Loose

labels and glue can clog spray arm or the pump

and will reduce washing performance.

Seasoning will be removed and iron will rust.

Always check manufacturer’s recommendations

before washing. Antique, hand-painted, or over-

the-glaze patterns may fade. Gold leaf can

discolor or fade.

Always check manufacturer’s recommendations

before washing. Some types of leaded crystal can

etch with repeated washings.

Gold-colored flatware will discolor.

Milk glass will yellow with repeated dishwasher

washing.

Handles of some knives are attached to the blade

with adhesives which may loosen if washed in the

dishwasher.

High water temperatures and detergent can

discolor or pit finish.

Cannot withstand high water temperatures

and detergents.

Always check manufacturer’s recommendations

before washing. Plastics vary in their capacity to

withstand high water temperatures and deter-

gents. Load plastics in top rack only.

Run the Rinse Only cycle if not washing immedi-

ately. Prolonged contact with food containing salt,

vinegar, milk products, or fruit juice can damage

finish.

Run the Rinse Only cycle if not washing immedi-

ately. Prolonged contact with food containing salt,

acid, or sulfide (eggs, mayonnaise, and seafood)

can damage finish.

Can rust.

Always check manufacturer’s recommendations

before washing. Untreated wood can warp,

crack, or lose its finish.

MATERIAL

Aluminum

Bottles

and Cans

Cast Iron

China/

Stoneware

Crystal

Gold

Glass

Hollow-

Handle

Knives

Pewter

Disposable

Plastics

Stainless

Steel

Sterling

Silver or

Silver Plate

Tin

Wooden

Ware

20

Washing Special Items

DISHWASHER SAFE?

Yes

No

Yes

No

Yes

No

Yes

No

8051225 v06 EN (c28) 10/6/98 9:47 AM Page 20

La page est en cours de chargement...

Whirlpool 980 Manuel utilisateur

Ce manuel convient également à

Whirlpool 980 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents