Zhejiang Dahua Vision Technology Floodlight Network Camera Mode d'emploi

Taper
Mode d'emploi
Floodlight Network Camera
Quick Start Guide
V1.0.0
I
Foreword
General
This manual introduces the installation and operations of network camera. Read carefully before
using the device, and keep the manual safe for future reference.
Safety Instructions
The following signal words might appear in the manual.
Signal Words Meaning
Indicates a medium or low potential hazard which, if not avoided,
could result in slight or moderate injury.
Indicates a potential risk which, if not avoided, could result in
property damage, data loss, reductions in performance, or
unpredictable result.
Provides additional information as a supplement to the text.
Revision History
Version Revision Content Release Time
V1.0.0 First release. August 2022
Privacy Protection Notice
As the device user or data controller, you might collect the personal data of others such as their face,
fingerprints, and license plate number. You need to be in compliance with your local privacy
protection laws and regulations to protect the legitimate rights and interests of other people by
implementing measures which include but are not limited: Providing clear and visible identification
to inform people of the existence of the surveillance area and provide required contact information.
Disclaimer
This guide is for informational purpose only. Working with electricity can be dangerous unless
proper safely precautions are taken. If you are not comfortable or are inexperienced with the
processes and tools described in this manual, we recommend that you hire a licensed electrician.
About the Manual
The manual is for reference only. Slight differences might be found between the manual and the
product.
We are not liable for losses incurred due to operating of the product in ways that are not in
compliance with the manual.
The manual will be updated according to the latest laws and regulations of related jurisdictions.
For detailed information, see the paper User Manual, use our CD-ROM, scan the QR code or visit
our official website. The manual is for reference only. Slight differences might be found between
the electronic version and the paper version.
All the designs and software are subject to change without prior written notice. Product updates
II
might result in some differences appearing between the actual product and the manual. Please
contact customer service for the latest program and supplementary documentation.
There might be deviations in the description of the technical data, functions and operations, or
errors in the print. If there is any doubt or dispute, we reserve the right of final explanation.
Upgrade the reader software or try other mainstream reader software if the manual (in PDF
format) cannot be opened.
All trademarks, registered trademarks and the company names in the manual are the properties
of their respective owners.
Please visit our website, contact the supplier or customer service if any problems occur while
using the device.
If there is any uncertainty or controversy, we reserve the right of final explanation.
III
Important Safeguards and Warnings
This section introduces content covering the proper handling of the device, hazard prevention, and
prevention of property damage. Read carefully before using the device, comply with the guidelines
when using it.
Transportation Requirements
Transport the device under allowed humidity and temperature conditions.
Pack the device with packaging provided by its manufacturer or packaging of the same quality
before transporting it.
Do not place heavy stress on the device, violently vibrate or immerse it in liquid during
transportation.
Storage Requirements
Store the device under allowed humidity and temperature conditions.
Do not place the device in a humid, dusty, extremely hot or cold site that has strong
electromagnetic radiation or unstable illumination.
Do not place heavy stress on the device, violently vibrate or immerse it in liquid during storage.
Installation Requirements
Strictly comply with the local electrical safety codes and standards, and check whether the power
supply is correct before operating the device.
Please follow the electrical requirements to power the device.
When selecting the power adapter, the power supply must conform to the requirements of
ES1 in IEC 62368-1 standard and be no higher than PS2. Please note that the power supply
requirements are subject to the device label.
We recommend using the power adapter provided with the device.
Do not connect the device to two or more kinds of power supplies, unless otherwise specified, to
avoid damage to the device.
The device must be installed in a location that only professionals can access, to avoid the risk of
non-professionals becoming injured from accessing the area while the device is working.
Professionals must have full knowledge of the safeguards and warnings of using the device.
Do not place heavy stress on the device, violently vibrate or immerse it in liquid during
installation.
An emergency disconnect device must be installed during installation and wiring at a readily
accessible location for emergency power cut-off.
We recommend you use the device with a lightning protection device for stronger protection
against lightning. For outdoor scenarios, strictly comply with the lightning protection
IV
regulations.
Ground the function earthing portion of the device to improve its reliability (certain models
are not equipped with earthing holes). The device is a class I electrical appliance. Make sure that
the power supply of the device is connected to a power socket with protective earthing.
The dome cover is an optical component. Do not directly touch or wipe the surface of the cover
during installation.
Operation Requirements
The cover must not be opened while the device is powered on.
Do not touch the heat dissipation component of the device to avoid the risk of getting burnt.
Use the device under allowed humidity and temperature conditions.
Do not aim the device at strong light sources (such as lamplight, and sunlight) when focusing it,
to avoid reducing the lifespan of the CMOS sensor, and causing overbrightness and flickering.
When using a laser beam device, avoid exposing the device surface to laser beam radiation.
Prevent liquid from flowing into the device to avoid damage to its internal components.
Protect indoor devices from rain and dampness to avoid electric shocks and fires breaking out.
Do not block the ventilation opening near the device to avoid heat accumulation.
Protect the line cord and wires from being walked on or squeezed particularly at plugs, power
sockets, and the point where they exit from the device.
Do not directly touch the photosensitive CMOS. Use an air blower to clean the dust or dirt on the
lens.
The dome cover is an optical component. Do not directly touch or wipe the surface of the cover
when using it.
There might be a risk of electrostatic discharge on the dome cover. Power off the device when
installing the cover after the camera finishes adjustment. Do not directly touch the cover and
make sure the cover is not exposed to other equipment or human bodies
Strengthen the protection of the network, device data and personal information. All necessary
safety measures to ensure the network security of the device must be taken, such as using strong
passwords, regularly changing your password, updating firmware to the latest version, and
isolating computer networks. For the IPC firmware of some previous versions, the ONVIF
password will not be automatically synchronized after the main password of the system has been
changed. You need to update the firmware or change the password manually.
Maintenance Requirements
Strictly follow the instructions to disassemble the device. Non-professionals dismantling the
device can result in it leaking water or producing poor quality images. For a device that is
required to be disassembled before use, make sure the seal ring is flat and in the seal groove
when putting the cover back on. When you find condensed water forming on the lens or the
desiccant becomes green after you disassembled the device, contact after-sales service to
replace the desiccant. Desiccants might not be provided depending on the actual model.
Use the accessories suggested by the manufacturer. Installation and maintenance must be
performed by qualified professionals.
V
Do not directly touch the photosensitive CMOS. Use an air blower to clean the dust or dirt on the
lens. When it is necessary to clean the device, slightly wet a soft cloth with alcohol, and gently
wipe away the dirt.
Clean the device body with a soft dry cloth. If there are any stubborn stains, clean them away
with a soft cloth dipped in a neutral detergent, and then wipe the surface dry. Do not use volatile
solvents such as ethyl alcohol, benzene, diluent, or abrasive detergents on the device to avoid
damaging the coating and degrading the performance of the device.
The dome cover is an optical component. When it is contaminated with dust, grease, or
fingerprints, use degreasing cotton moistened with a little ether or a clean soft cloth dipped in
water to gently wipe it clean. An air gun is useful for blowing dust away.
It is normal for a camera made of stainless steel to develop rust on its surface after being used in
a strong corrosive environment (such as the seaside, and chemical plants). Use an abrasive soft
cloth moistened with a little acid solution (vinegar is recommended) to gently wipe it away.
Afterwards, wipe it dry.
VI
Table of Contents
Foreword ........................................................................................................................................................................................................I
Important Safeguards and Warnings ............................................................................................................................................ III
1 Package List ............................................................................................................................................................................................. 1
2 Assembly ................................................................................................................................................................................................... 2
3 Application .............................................................................................................................................................................................. 3
4 Overview ................................................................................................................................................................................................... 4
5 Operating with DMSS APP ............................................................................................................................................................... 5
6 Installation ............................................................................................................................................................................................... 7
6.1 Installation Methods ................................................................................................................................................................ 7
6.2 Attaching the Camera.............................................................................................................................................................. 8
6.3 Adjusting the Lens Angle....................................................................................................................................................... 8
1
1 Package List
Figure 1-1 Packing list
2
2 Assembly
Figure 2-1 Assembly
3
3 Application
When mounted at 3 m (10 feet) off the ground, with the PIR lens parallel to the ground, the motion
detector is optimized to detect human-sized objects up to 10 m (33 feet).
Figure 3-1 Application
4
4 Overview
Figure 4-1 Overview
Press and hold the reset button for 10 s to reset the camera.
Table 4-1 Indicator light pattern
LED Indicator Status Device Status
Off Powered off/LED turned off
Red light on Booting
Green light flashing slowly Enabling device hotspot
Green light flashing fastly Connecting to Wi-Fi
Green light on Operating properly
Red light flashing Network connection failed
Green and red light flashing alternately Firmware updating
5
5 Operating with DMSS APP
To ensure the best possible wireless performance, make sure that there are no obstacles and
electromagnetic interference between the device and the router.
Step 1 Add the device.
1) Tap + button on the upper-right corner of the DMSS home page to scan the QR code
on the camera. If your DMSS fails to scan the QR code, tap Manually enter SN.
2) Make sure the indicator light on the device flashes green, and then tap Next.
Figure 5-1 Add the device
Step 2 Configure the device hotspot.
1) When the app pops up the notification: DMSS wants to join WLAN network "Camera-
xxxxxxxx", tap Join.
If the app shows unable to join the network "Camera-xxxxxxxx", tap Set, go to WLAN
settings on your mobile phone, and then connect hotspot named Camera-xxxxxxxx.
2) Create the password for the device, and then tap Next.
Figure 5-2 Connect the device hotspot
Step 3 Configure the Wi-Fi.
6
Select your Wi-Fi network from SSID list and then enter the password.
Step 4 Configure the device information.
1) Create the device name, and then tap Save.
2) Set the time zone, and then tap Done.
Figure 5-3 Configure the Wi-Fi
7
6 Installation
Risk of electrical shock.
Be sure to disconnect the power at the fuse or circuit breaker before installation.
Verify that the supply voltage is correct. Connect the fixture to a 100-240 VAC 50/60 Hz power
source.
Properly ground fixture.
Always follow code standards when installing wired connection.
We strongly suggest that you hire a licensed electrician to install the camera.
Risk of fire.
Do not install the camera near combustible or flammable surfaces.
Do not connect this light fixture to a dimmer switch or timer.
Make sure the mounting surface is strong enough to hold at least three times the weight of the
camera.
6.1 Installation Methods
Figure 6-1 Installation methods
8
6.2 Attaching the Camera
Figure 6-2 Attaching the camera
6.3 Adjusting the Lens Angle
Adjust the lens angle by loosening the screws and rotating the universal joint.
9
Figure 6-3 Adjust the lens angle (1)
Adjust the lens angle by rotating the universal joint only.
Figure 6-4 Adjust the lens angle (2)
Legal and Regulatory Information
Legal Considerations
This product can be regulated by laws that vary from country to country. Check the laws in your local
region before using it.
Disclaimer
Every care has been taken in the preparation of this document. Please contact us through the
following contact information of any inaccuracies or omissions. Prosegur shall not be held
responsible for any technical or typographical errors and reserves the right to make changes to the
product and manuals without prior notice. Prosegur makes no warranty of any kind with
regard to the material contained within this document, including, but not limited to, the
implied warranties of merchantability and fitness for a particular purpose. Prosegur shall not
be liable or responsible for incidental or consequential damages in connection with the
furnishing, performance or use of this material. This product is only to be used for its intended
purpose.
Intellectual Property Rights
Prosegur retains all intellectual property rights relating to technology embodied in the
product described in this document.
Equipment Modifications
This equipment must be installed and used in strict accordance with the instructions given in the
user documentation. This equipment contains no user-serviceable components. Unauthorized
equipment changes or modifications will invalidate all applicable regulatory certifications and
approvals.
Regulatory Information
European Directives Compliance
This product complies with the applicable CE marking directives and standards:
Low Voltage (LVD) Directive 2014/35/EU.
Electromagnetic Compatibility (EMC) Directive 2014/30/EU.
Restrictions of Hazardous Substances (RoHS) Directive 2011/65/EU and its amending
Directive (EU) 2015/863.
CE-Electromagnetic Compatibility (EMC)
This digital equipment is compliant with Class B according to EN 55032.
CE-Safety
This product complies with IEC/EN/UL 62368-1, Audio/video, information and communication
technology equipment – Part 1: Safety requirements and IEC/UL 60950-1: Safety of Information
Technology Equipment.
Declaration of Conformity CE
(Only for the product has RF function)
Hereby, Prosegur declares that the radio equipment is compliant with Radio Equipment Directive
(RED) 2014/53/EU.
Questo prodotto è conforme alle direttive e agli standard di marcatura CE applicabili:
Bassa tensione (LVD) Direttiva 2014/35/UE.
Compatibilità elettromagnetica (EMC) Direttiva 2014/30UE.
Restrizione sulle sostanze pericolose (RoHS) Direttiva 2011/65/UE e Direttiva delegata (UE)
2015/863.
È possibile ottenere una copia della dichiarazione originale di conformità da Prosegur.
CE-Compatibilità elettromagnetica (EMC)
Questa apparecchiatura digitale è conforme alla Classe B della certificazione EN 55032.
CE-Sicurezza
Questo prodotto è conforme alle disposizioni IEC/EN/UL 62368-1 o IEC/UL 60950-1 sulla sicurezza
delle apparecchiature informatiche.
Dichiarazione di conformità CE
(Solo per prodotti con trasmettitori / ricevitori RF)
Con la presente, Prosegur dichiara che l'apparecchiatura radio è conforme alla Direttiva
sulle apparecchiature radio (RED) 2014/53/UE.
Declaration of Conformity UKCA
This device complies with UKCA relevant directives and standards.
Electrical Equipment (Safety) Regulations 2016.
Electromagnetic Compatibility Regulations 2016.
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012.
Hereby, Prosegur declares that the radio equipment is compliant with Radio Equipment Regulations
2017.
USA Regulatory Compliance
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Attention that changes or modification not expressly approved by the party responsible for
compliance could void the users authority to operate the equipment.
Note: This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This product generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this product does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC SDOC Statement can be downloaded from: https://us.dahuasecurity.com/support/notices/.
RF exposure warning
(Only for the product has RF communication function)
This equipment must be installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provided with antenna installation instructions and
transmitter operating conditions for satisfying RF exposure compliance.
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and yourbody.
Canada Regulatory Compliance
ICES-003
This Class B digital apparatus complies with Canadian ICES -003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts
de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
Japan Regulatory Compliance
VCCI
These products comply with the requirements of VCCI Class B Information Technology Equipment.
Batteries
Correct disposal of batteries in this product
This marking on the battery indicates that the batteries in this product should not be disposed
of with other household waste at the end of their working life. Where marked, the chemical symbols
Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels
in Directive 2006/66/EC and its amending Directive 2013/56/EU. If batteries are not properly
disposed of, these substances can cause harm to human health or the environment.
CAUTION
Do not ingest battery. Chemical Burn Hazard.
This product contains a coin cell battery. If the coin cell battery is swallowed, it can cause severe
internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from
children.
If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
CAUTION
Privacy Protection Notice
As the device user or possible data controller, you might collect personal data of others such as face,
fingerprints, car plate number, Email address, phone number, GPS and so on. You need to be in
compliance with the local privacy protection laws and regulations to protect the legitimate rights
and interests of other people by implementing measures, including but not limited to: providing
clear and visible identification to inform data subject the existence of surveillance area and providing
related contact.
About the Manual
The manual is for reference only. If there is inconsistency between the manual and the actual
product, the actual product shall prevail.
We are not liable for any loss caused by the operations that do not comply with the manual.
The manual would be updated according to the latest laws and regulations of related
jurisdictions. For detailed information, refer to the paper manual, CD-ROM, QR code or our
official website. If there is inconsistency between paper manual and the electronic version, the
electronic version shall prevail.
All the designs and software are subject to change without prior written notice. The product
updates might cause some differences between the actual product and the manual. Please
contact the customer service for the latest program and supplementary documentation.
There still might be deviation in technical data, functions and operations description, or errors in
print. If there is any doubt or dispute, we reserve the right of final explanation.
Upgrade the reader software or try other mainstream reader software if the manual (in PDF
format) cannot be opened.
All trademarks, registered trademarks and the company names in the manual are the properties
of their respective owners.
Please visit our website, contact the supplier or customer service if there is any problem
occurring when using the device.
If there is any uncertainty or controversy, we reserve the right of final explanation.
Support
Should you require any technical assistance, please contact your Prosegur distributor. If your
questions cannot be answered immediately, your distributor will forward your queries through the
appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:
Download user documentation and software updates.
Search by product, category, or phrase.
English
Important Safeguards and Warnings
This Chapter describes the contents covering proper handling of the device, hazard prevention, and
prevention of property damage. Read these contents carefully before using the device, comply with
them when using, and keep it well for future reference.
Safety Instructions
The following categorized signal words with defined meaning might appear in the manual.
Signal Words Meaning
DANGER Indicates a high potential hazard which, if not avoided, will
result in death or serious injury.
WARNING Indicates a medium or low potential hazard which, if not
avoided, could result in slight or moderate injury.
CAUTION
Indicates a potential risk which, if not avoided, could result in
property damage, data loss, lower performance, or
unpredictable result.
TIPS Provides methods to help you solve a problem or save you time.
NOTE Provides additional information as the emphasis and
supplement to the text.
Safety Requirement
Abide by local electrical safety standards to ensure that the voltage is stable and complies
with the power supply requirement of the device.
Transport, use, and store the device under the allowed humidity and temperature conditions.
Refer to the corresponding technical specifications of device for specific working
temperature and humidity.
Do not place the device in a location exposed to dampness, dust, extreme hot or cold, strong
electronic radiation, or unstable lighting condtions.
Do not install the device in a place near the heat source, such as radiator, heater, furnace, or
other heat generating device to avoid fire.
Prevent liquid from flowing into the device to avoid damge to internal components.
Install the device horizontally or install on the stable place to pre vent it from falling.
Install the device in a well-ventilated place, and do not block the ventilation of the device.
Do not disassemble the device arbitrarily.
Avoid heavy stress, violent vibration, and soaking during during transportation, storage, and
installation. Complete package is necessary during the transportation.
Use the factory package or the equivalent for transportation.
Battery
Low battery power affects the operation of the RTC, causing it to reset at every power-up. When the
battery needs replacing, a log message will appear in the product’s server report. For more
information about the server report, see the product´s setup pages or contact Prosegur support.
Risk of explosion if the battery is incorrectly replaced.
Replace only with an identical battery or a battery which is recommended by Imou.
Dispose of used batteries according to local regulations or the battery manufacturer's
instructions.
RF exposure warning
(Only for the product has RF communication function)
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and yourbody.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et
votre corps.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotropicallyradiated power (e.i.r.p.) is not more than that necessary for successful
communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner
avec une antenne d'un type et d'un gain maximal (ou inférieur) approupourl'émetteur par
Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique àl'intention des
autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une
communication satisfaisante.
The following safety guide is only applicable to products which support 5 GHz Wi-Fi.
(i) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725
MHz shall comply with the e.i.r.p. limit; and
(ii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with
the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.
(i) le gain d'antenne maximal autorisé pour les appareils dans les bandes 5250-5350 MHz et
5470-5725 MHz doivent respecter le pire limiter; et
(ii) le gain d'antenne maximal autorisé pour les appareils dans la bande 5725-5825 MHz doivent
respecter le pire limites spécifiées pour le point-à-point et l'exploitation non point à point, le cas
échéant.
Risk of explosion if the battery is replaced by an incorrect type.
Do not throw or immerse into water, heat to more than 100°C (212°F), repair or disassemble, leave in
an extremely low air pressure environment or extremely high-temperature environment, crush,
puncture, cut or incinerate.
Dispose of the battery as required by local ordinances or regulations.
Safety
The product complies with IEC/UL 60950-1, Information Technology Equipment – Safety – Part 1:
General Requirements; or complies with IEC/EN/UL 62368-1, Audio/video, information and
communication technology equipment– Part 1: Safety requirements.
If the power supply to the product is from external power adaptor without connecting to AC Mains,
and the product is not shipped with power adaptor, customers are required to use the external
power adaptor that must fulfill the requirements for Safety Extra Low Voltage (SELV) and Limited
Power Source (LPS).
Waste Electrical and Electronic Equipment (WEEE) statements
Disposal and Recycling
When this product has reached the end of its useful life, dispose of it according to local laws and
regulations. For information about your nearest designated collection point, contact your local
authority responsible for waste disposal. In accordance with local legislation, penalties may be
applicable for incorrectdisposal of this waste.
This symbol means that the product shallnot be disposed of together with household or
commercial waste. Directive 2012/19/EU on waste electrical and electronic equipment (WEEE) is
applicable in the European Union member states. To prevent potential harm to human health and
the environment, the product must be disposed of in an approved and environmentally safe
recycling process. For information about your nearest designated collection point, contact your local
authority responsible for waste disposal. Businesses should contact the product supplier for
information about how to dispose of this product correctly.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17

Zhejiang Dahua Vision Technology Floodlight Network Camera Mode d'emploi

Taper
Mode d'emploi