Sony HT-RT3 Mode d'emploi

HT-RT3

Home Theatre

System

Operating Instructions US

Mode d’emploi FR

Manual de Instrucciones ES

2

US

For the customers in the USA

Owner’s Record

The model and serial numbers are

located at the rear exterior of the

Subwoofer. Record these numbers in

the space provided below. Refer to

them whenever you call upon your Sony

dealer regarding this product.

Model No.

Serial No._____________________________

To reduce the risk of fire or electric

shock, do not expose this apparatus

to rain or moisture.

To reduce the risk of fire, do not cover

the ventilation opening of the appliance

with newspapers, tablecloths, curtains,

etc.

Do not expose the appliance to naked

flame sources (for example, lighted

candles).

To reduce the risk of fire or electric

shock, do not expose this appliance to

dripping or splashing, and do not place

objects filled with liquids, such as vases,

on the appliance.

Do not install the appliance in a

confined space, such as a bookcase or

built-in cabinet.

Do not expose batteries or appliances

with battery-installed to excessive heat,

such as sunshine and fire.

To prevent injury, this apparatus must

be securely placed on the cabinet or

attached to the floor/wall in accordance

with the installation instructions.

Indoor use only.

On power sources

 The unit is not disconnected from the

mains as long as it is connected to the

AC outlet, even if the unit itself has

been turned off.

 As the main plug is used to disconnect

the unit from the mains, connect the

unit to an easily accessible AC outlet.

Should you notice an abnormality in

the unit, disconnect the main plug

from the AC outlet immediately.

For the customers in the USA

This symbol is intended to alert

the user to the presence of

uninsulated “dangerous

voltage” within the product’s enclosure

that may be of sufficient magnitude to

constitute a risk of electric shock to

persons.

This symbol is intended to alert

the user to the presence of

important operating and

maintenance (servicing) instructions in

the literature accompanying the

appliance.

Properly shielded and grounded cables

and connectors must be used for

connection to host computers and/or

peripherals in order to meet FCC

emission limits.

NOTE:

This equipment has been tested and

found to comply with the limits for a

Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are

designed to provide reasonable

protection against harmful interference

in a residential installation. This

equipment generates, uses and can

radiate radio frequency energy and, if

not installed and used in accordance

with the instructions, may cause

harmful interference to radio

communications.

WARNING

3

US

However, there is no guarantee that

interference will not occur in a particular

installation. If this equipment does

cause harmful interference to radio or

television reception, which can be

determined by turning the equipment

off and on, the user is encouraged to try

to correct the interference by one or

more of the following measures:

 Reorient or relocate the receiving

antenna.

 Increase the separation between the

equipment and receiver.

 Connect the equipment into an outlet

on a circuit different from that to

which the receiver is connected.

 Consult the dealer or an experienced

radio/TV technician for help.

CAUTION

You are cautioned that any changes or

modifications not expressly approved in

this manual could void your authority to

operate this equipment.

This equipment must not be co-located

or operated in conjunction with any

other antenna or transmitter.

This equipment complies with FCC

radiation exposure limits set forth for an

uncontrolled environment and meets

the FCC radio frequency (RF) Exposure

Guidelines. This equipment has very low

levels of RF energy that is deemed to

comply without maximum permissive

exposure evaluation (MPE).

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near

water.

6) Clean only with dry cloth.

7) Do not block any ventilation

openings. Install in accordance with

the manufacturer’s instructions.

8) Do not install near any heat sources

such as radiators, heat registers,

stoves, or other apparatus (including

amplifiers) that produce heat.

9) Do not defeat the safety purpose of

the polarized or grounding-type

plug. A polarized plug has two

blades with one wider than the

other. A grounding type plug has

two blades and a third grounding

prong. The wide blade or the third

prong are provided for your safety. If

the provided plug does not fit into

your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being

walked on or pinched particularly at

plugs, convenience receptacles, and

the point where they exit from the

apparatus.

11) Only use attachments/accessories

specified by the manufacturer.

12) Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the

apparatus. When a cart is used, use

caution when moving the cart/

apparatus combination to avoid

injury from tip-over.

13) Unplug this apparatus during

lightning storms or when unused for

long periods of time.

14) Refer all servicing to qualified service

personnel. Servicing is required

when the apparatus has been

damaged in any way, such as power-

supply cord or plug is damaged,

liquid has been spilled or objects

have fallen into the apparatus, the

apparatus has been exposed to rain

or moisture, does not operate

normally, or has been dropped.

4

US

For the customers in Canada

Properly shielded and grounded cables

and connectors must be used for

connection to host computers and/or

peripherals.

This device complies with Industry

Canada’s licence-exempt RSSs.

Operation is subject to the following

two conditions:

(1) This device may not cause

interference; and

(2) This device must accept any

interference, including interference that

may cause undesired operation of the

device.

This equipment complies with IC

radiation exposure limits set forth for an

uncontrolled environment and meets

RSS-102 of the IC radio frequency (RF)

Exposure rules.

This equipment has very low levels of RF

energy that is deemed to comply

without maximum permissive exposure

evaluation (MPE). But it is desirable that

it should be installed and operated

keeping the radiator at least 20 cm or

more away from person’s body.

Copyrights and Trademarks

 This system incorporates Dolby*

Digital.

* Manufactured under license from

Dolby Laboratories.

Dolby and the double-D symbol are

trademarks of Dolby Laboratories.

 The BLUETOOTH® word mark and

logos are registered trademarks

owned by Bluetooth SIG, Inc. and any

use of such marks by Sony Corporation

is under license. Other trademarks and

trade names are those of their

respective owners.

 The terms HDMI and HDMI High-

Definition Multimedia Interface, and

the HDMI Logo are trademarks or

registered trademarks of HDMI

Licensing Administrator, Inc. in the

United States and other countries.

 The N-Mark is a trademark or

registered trademark of NFC Forum,

Inc. in the United States and in other

countries.

 Android™ is a trademark of Google

LLC.

 Google Play is a trademark of Google

LLC.

 MPEG Layer-3 audio coding

technology and patents licensed from

Fraunhofer IIS and Thomson.

 Windows Media is either a registered

trademark or trademark of Microsoft

Corporation in the United States and/

or other countries.

 This product is protected by certain

intellectual property rights of Microsoft

Corporation. Use or distribution of

such technology outside of this

product is prohibited without a license

from Microsoft or an authorized

Microsoft subsidiary.

 “BRAVIA” is a trademark of Sony

Corporation.

 “ClearAudio+” is a trademark of Sony

Corporation.

 “PlayStation” is a registered trademark

of Sony Computer Entertainment Inc.

 Apple, iPhone, iPod, and iPod touch

are trademarks of Apple Inc.,

registered in the U.S. and other

countries.

Use of the Made for Apple badge means

that an accessory has been designed to

connect specifically to the Apple product(s)

identified in the badge, and has been

certified by the developer to meet Apple

performance standards. Apple is not

responsible for the operation of this device

or its compliance with safety and

regulatory standards.

5

US

Compatible iPhone/iPod models

The compatible iPhone/iPod models

are as follows. Update your iPhone/

iPod with the latest software before

using with the system.

Made for:

 iPhone 6s/iPhone 6s Plus/iPhone 6/

iPhone 6 Plus/iPhone 5s/iPhone 5c/

iPhone 5

 iPod touch (6th generation)/

iPod touch (5th generation)

 Other system and product names are

generally trademarks or registered

trademarks of the manufacturers. ™

and  marks are not indicated in this

document.

About these operating

instructions

The instructions in these Operating

Instructions describe the controls on

the remote control. You can also use

the controls on the Subwoofer if they

have the same or similar names as

those on the remote control.

Some illustrations are presented as

conceptual drawings, and may be

different from the actual products.

The default setting is underlined.

The text enclosed in double quotation

mark (“--”) appears in the front panel

display.

6

US

Table of Contents

About these operating

instructions ...........................5

Guide to parts and controls ....... 7

Listening

Listening to sound from the

connected devices ..............11

Listening to music from a USB

device ................................. 12

Sound Adjustment

Enjoying sound effects ............ 13

BLUETOOTH Functions

Listening to music from a

BLUETOOTH device ............ 14

Controlling the system using a

smartphone or tablet

(Sony | Music Center) ......... 16

Settings and Adjustments

Using the setup display ............17

Other Functions

Using the Control for HDMI

function ..............................20

Using the “BRAVIA” Sync

function .............................. 21

Saving power in standby

mode .................................. 22

Mounting the Bar Speaker and

the Surround Speakers on

a wall .................................. 22

Operating the system using

the remote control ............. 23

Adjusting the volume of

Subwoofer ..........................23

Additional Information

Precautions ..............................24

Troubleshooting .......................25

Playable types of files ..............29

Supported audio formats ........29

Specifications ...........................30

On BLUETOOTH

communication .................. 31

Connecting



Startup Guide (separate document)

7

US

Guide to parts and controls

For more information, refer to the pages indicated in parentheses.

Top panel

 (power) touch key

Turns on the system, or sets it to

standby mode.

 INPUT touch key

Selects the device you want to

use.

 PAIRING touch key

 VOL (volume) +/– touch key

 (N-Mark) (page 15)

Position the NFC-compatible

device near this indication to

activate the NFC function.

About touch keys

The touch keys work when you touch

them lightly. Do not press on them with

excessive force.

Subwoofer

8

US

Front panel

 Remote control sensor

(page 23)

 Front panel display

 Blue LED indicator

Shows the BLUETOOTH status as

follows.

 (USB) port (page 12)

During BLUETOOTH

pairing

Flashes quickly

The system is

attempting to connect

with a BLUETOOTH

device

Flashes

The system has

established connection

with a BLUETOOTH

device

Lights up

9

US

Rear panel

 AC power cord (mains lead)

 HDMI OUT (ARC) jack

 TV IN (OPTICAL) jack

 ANALOG IN jack

10

US

 INPUT (page 11)

 (power)

Turns on the system, or sets it to

standby mode.

 DIMMER

Adjusts the brightness of the

front panel display.

“BRIGHT”  “DARK”  “OFF”

 The front panel display is turned

off when “OFF” is selected. It

turns on automatically when

you press any buttons, then

turns off again if you do not

operate the system for several

seconds. However, in some

cases, the front panel display

may not turn off. In this case,

the brightness of the front panel

display is same as “DARK”.

 MENU

Turns on/off the menu in the

front panel display.

/

Selects the menu items.

ENTER

Enters the selection.

BACK

Return to the previous display.

Stops USB playback.

 (volume) +*/–

Adjusts the volume.

 SW  (subwoofer volume) +/–

(page 23)

Adjusts the volume of bass

sound.

 (muting)

Turns off the sound temporarily.

 CLEARAUDIO+

Automatically selects the suitable

sound setting for the sound

source.

 SOUND FIELD (page 13)

Selects a sound mode.

 VOICE (page 13)



* (play/pause)

Pauses or resumes playback.

 NIGHT (page 13)

Remote control

11

US

Listening

 / (previous/next/

rewind/fast forward)

Press to select the previous/next

track or file.

Hold down to search backward or

forward.

*The  and  + buttons have a tactile

dot. Use the tactile dot as a reference

when operating the remote control.

Listening to sound from

the connected devices

Press INPUT repeatedly.

When you press INPUT once, the current

device appears in the front panel

display, then each time you press

INPUT, the device changes cyclically as

follows.

“TV”  “ANALOG”  “BT”  “USB”

Listening

“TV”

Device (TV, etc.) that is connected to the TV

IN (OPTICAL) jack, or a TV compatible with the

Audio Return Channel function that is

connected to the HDMI OUT (ARC) jack

“ANALOG”

Device (Digital media player, etc.) that is

connected to the ANALOG IN jack

“BT”

BLUETOOTH device that supports A2DP

(page 14)

“USB”

USB device that is connected to the (USB)

port (page 12)

12

US

Listening to music from a

USB device

You can play music files on a connected

USB device.

For playable types of files, see “Playable

types of files” (page 29).

1 Connect the USB device to the

(USB) port.

Refer to the operating instructions

of the USB device before

connecting.

2 Press INPUT repeatedly to select

“USB”.

The USB content list appears on the

TV screen.

3 Press / to select the content

you want, then press ENTER.

The selected content starts playing.

4 Adjust the volume.

 Adjust the volume of the system

by pressing  +/–.

 Adjust the volume of Subwoofer

by pressing SW  +/–.

Do not remove the USB device during

operation. To avoid data corruption or

damage to the USB device, turn the system

off before removing the USB device.

 Playing time

 Total playing time

 Bit rate

 Playback status

 Rewind/fast forward speed

 Repeat play status

 Selected file index/Total files in the

folder

 Depending on the source being played,

some information may not be displayed.

 Depending on the play mode, the

information displayed may be different.

Note

Information of USB device

on the TV screen

Notes

13

US

Sound Adjustment

Enjoying sound effects

You can easily enjoy pre-programmed

sound fields that are tailored to different

kinds of sound sources.

Press SOUND FIELD repeatedly until

the sound field you want appears in

the front panel display.

You can also press CLEARAUDIO+ to select

“CLEARAUDIO+”.

This function is useful when watching

movies late at night. You will be able to

hear the dialog clearly even at a low

volume level.

Press NIGHT to select “N.ON”.

To inactivate the Night Mode function,

press NIGHT to select “N.OFF”.

This function helps make dialogs

clearer.

Press VOICE repeatedly.

 “UP OFF”: The Clear Voice function is

turned off.

 “UP 1”: Dialogue range is enhanced.

 “UP 2”: Dialogue range is enhanced,

and the parts of range difficult to be

discerned by the elderly are boosted.

Sound Adjustment

Selecting the sound field

“CLEARAUDIO+”

You can enjoy the sound with Sony-

recommended sound field. Sound field is

automatically optimized according to

playback content and function.

“MOVIE”

Sounds are played back with surround

effects, and they are realistic and powerful,

making them suitable for movies.

“MUSIC”

Sound effects are optimized for listening to

music.

“SPORTS”

Commentary is clear, cheers are heard as

surround-sound, and sounds are realistic.

“GAME”

Sounds are powerful and realistic, suitable

for game play.

“STANDARD”

Sound that corresponds to every source.

Tip

Using the Night Mode

function

Using the Clear Voice

function

14

US

Listening to music from a

BLUETOOTH device

Pairing is an operation where

BLUETOOTH devices register with each

other beforehand. Once a pairing

operation is performed, it does not need

to be performed again.

1 Place the BLUETOOTH device

within 1 meter (3.3 feet) from the

Subwoofer.

2 Press PAIRING on the

Subwoofer.

The blue LED indicator flashes

quickly during BLUETOOTH pairing.

3 Turn on the BLUETOOTH function,

and then select “HT-RT3” after

searching for it on the BLUETOOTH

device.

Perform this step within 5 minutes,

otherwise pairing mode will be

canceled.

When the BLUETOOTH connection

is established, the blue LED

indicator lights up.

 If passkey is required on the BLUETOOTH

device, enter “0000”. Passkey may be

called “Passcode”, “PIN code”, “PIN

number” or “Password”.

 You can pair up to 9 BLUETOOTH devices.

If the 10th BLUETOOTH device is paired,

the least recently connected device will

be replaced by the new one.

1 Turn the BLUETOOTH function of

the paired device to on.

2 Press INPUT repeatedly to select

“BT”.

The system automatically

reconnects to the BLUETOOTH

device it was most recently

connected to.

When the BLUETOOTH connection

is established, the blue LED

indicator lights up.

3 Start playback on the BLUETOOTH

device.

4 Adjust the volume.

 Adjust the volume of the

BLUETOOTH device.

 Adjust the volume of the system

by pressing  +/–.

 Adjust the volume of Subwoofer

by pressing SW  +/–.

 Once the system and the BLUETOOTH

device are connected, you can control

playback by pressing  and /.

 You can connect to the system from a

paired BLUETOOTH device even when the

system in standby mode, if you set the

“BTSTB” to “ON” (page 18).

 The audio playback on this system may

be delayed from that on the BLUETOOTH

device because of the characteristics of

the BLUETOOTH wireless technology.

BLUETOOTH Functions

Pairing this system with a

BLUETOOTH device

Notes

Listening to music from the

paired device

Notes

15

US

BLUETOOTH Functions

You can enable or disable codec AAC from

BLUETOOTH device (page 18).

To disconnect the BLUETOOTH

device

Perform any of the following items.

 Press PAIRING on the Subwoofer

again.

 Disable the BLUETOOTH function on

the BLUETOOTH device.

 Turn off the system or the BLUETOOTH

device.

NFC (Near Field Communication) is a

technology enabling short-range

wireless communication between

various devices.

By holding an NFC-compatible remote

device near to the N-Mark on the

Subwoofer, the system and remote

device proceed to complete pairing and

the BLUETOOTH connection

automatically.

The system only can recognize and

connect to one NFC-compatible remote

device at a time.

Depending on your remote device, you

may need to perform the following items

on your remote device in advance.

 Turn on the NFC function. For details,

refer to the operating instructions of

the remote device.

 If your remote device is having an older

OS version than Android 4.1.x,

download and start the “NFC Easy

Connect” application. “NFC Easy

Connect” is a free application for

Android remote devices that can be

obtained from Google Play™. (The

application may not be available in

some countries/regions.)

1 Hold the remote device near to

the N-Mark on the Subwoofer

until the remote device vibrates.

Follow the on-screen instructions

displayed on the remote device,

and complete the procedure for

BLUETOOTH connection.

When the BLUETOOTH connection

is established, the blue LED

indicator lights up.

2 Start playback of audio source on

the remote device.

For details on playback operations,

refer to the operating instructions of

your remote device.

Tip

Connecting to a remote

device by One-touch

function (NFC)

Compatible remote devices

Remote devices with a built-in NFC

function

(OS: Android 2.3.3 or later, excluding

Android 3.x)

Notes

16

US

3 Adjust the volume.

 Adjust the volume of the

BLUETOOTH device.

 Adjust the volume of the system

by pressing  +/–.

 Adjust the volume of Subwoofer

by pressing SW  +/–.

If pairing and the BLUETOOTH connection

fail, do the following.

 Hold the remote device near to the

N-Mark on the Subwoofer again.

 Remove the case from the remote device

if using a commercially available remote

device case.

 Relaunch “NFC Easy Connect”

application.

To stop playback by One-touch

function

Hold the remote device near to the

N-Mark on the Subwoofer again.

Controlling the

system using a

smartphone or

tablet (Sony | Music

Center)

Sony | Music Center is an application for

controlling compatible Sony audio

devices using the mobile device such as

a smartphone or tablet.

For details about Sony | Music Center,

refer to the following URL.

http://www.sony.net/smcqa/

Sony | Music Center allows you to:

 enjoy music at home seamlessly.

 change commonly used settings,

select the input of the system, and

adjust the volume.

 enjoy music content stored on a

smartphone with the system.

 enjoy music visually with your

smartphone display.

 Sony | Music Center uses the BLUETOOTH

function of the system.

 What you can control with Sony | Music

Center varies depending on the

connected device. The specification and

design of the application may change

without notice.

1 Download free Sony | Music

Center app on the mobile device.

2 Connect the system and mobile

device with the BLUETOOTH

connection (page 14).

3 Start Sony | Music Center.

4 Operate by following the Sony |

Music Center screen.

Use the latest version of Sony | Music

Center.

Tip

Notes

Using Sony | Music Center

Note

17

US

Settings and Adjustments

Using the setup display

You can set the following items with the menu.

Your settings are retained even if you disconnect the AC power cord (mains lead).

1 Press MENU to turn on the menu in the front panel display.

2 Press BACK///ENTER repeatedly to select the item and press ENTER to

select the setting you want.

3 Press MENU to turn off the menu.

The default settings are underlined.

Settings and Adjustments

Menu list

Menu items Function

“LVL >”

(Level)

“SUR.L”/“SUR.R”

(Surround left/right

speaker level)

“0.0 dB”

: Adjusts the sound level of the Surround

Speakers from –6.0 dB to +6.0 dB (0.5 dB interval).

Be sure to set “TTONE” to “ON” for easy adjustment.

“ATT”

(Attenuation

settings – Analog)

Distortion may occur when you listen to a device

connected to the ANALOG IN jack. You can prevent

distortion by attenuating the input level on the system.

“ON”: Attenuates the input level. The output level will

decrease at this setting.

“OFF”: Normal input level.

“DRC”

(Dynamic range

control)

Useful for enjoying movies at low sound volume. DRC

applies to Dolby Digital sources.

“ON”: Compresses sound in accordance with the

information contained in the content.

“OFF”: Sound is not compressed.

“TTONE”

(Test tone)

“ON”: The test tone is output from each speaker in

sequence.

“OFF”: Turns off the test tone.

“SPK >”

(Speaker)

“PLACE”

(Speaker

placement)

“STDRD”: Select this setting if you install the Bar Speaker

and the Surround Speakers in standard position.

“FRONT”: Select this setting if you install the Bar Speaker

and the Surround Speakers in front.

“SUR.L”/“SUR.R”

(Surround left/right

speaker distance)

“3.0 M”

: Adjusts the distance from the seating position to

the Surround Speakers from 1.0 meter (3.3 feet) to

6.0 meters (19.7 feet).

Note

18

US

“AUD >”

(Audio)

“DUAL”

(Dual mono)

You can enjoy multiplex broadcast sound when the

system receives a Dolby Digital multiplex broadcast

signal.

 “M/S”: Mixed sound of both the main and sub languages

will be output.

 “MAIN”: Sound of the main language will be output.

 “SUB”: Sound of the sub language will be output.

“TV AU”

(TV audio)

 “AUTO”: Select this setting when the system is

connected to an HDMI (ARC) jack of a TV with an HDMI

cable.

 “OPT”: Select this setting when the system is connected

to a TV with the optical digital cable.

“EFCT”

(Sound effect)

 “ON”: The sound of the selected sound field is played. It

is recommended to use this setting.

 “OFF”: The input source is down-mixed for 2 channels.

“STRM”

(Stream)

Shows the current audio stream information.

See page 29 on the supported audio formats.

“HDMI>” “CTRL”

(Control for HDMI)

 “ON”: The Control for HDMI function is enabled. Devices

connected with an HDMI cable can control each other.

 “OFF”: Off.

“TVSTB”

(Standby Linked to

TV)

This function is available when you set “CTRL” to “ON”.

 “AUTO”: If the input of the system is “TV”, the system

turns off automatically when you turn off the TV.

 “ON”: The system turns off automatically when you turn

off the TV regardless of the input.

 “OFF”: The system does not turn off when you turn off

the TV.

“COLOR”

(HDMI color)

 “AUTO”: Automatically detects the type of external

device, and switches to the matching color setting.

 “YCBCR”: Outputs YCBCR video signals.

 “RGB”: Outputs RGB video signals.

“BT >”

(BLUETOOTH)

“BTAAC”

(BLUETOOTH

Advanced audio

coding)

You can set whether or not the system uses AAC via

BLUETOOTH.

 “ON”: Enable AAC codec.

 “OFF”: Disable AAC codec.

If you change the “BTAAC” setting when a BLUETOOTH

device is connected, the codec setting is only reflected

after the next connection.

“BTSTB”

(BLUETOOTH

standby)

When the system has pairing information, the system is in

BLUETOOTH standby mode even when it is turned off.

 “ON”: BLUETOOTH standby mode is enabled.

 “OFF”: BLUETOOTH standby mode is disabled.

“INFO”

(BLUETOOTH

device information)

The detected BLUETOOTH device name and device

address appear in the front panel display.

“NO DEVICE” appears if the system is not connected to a

BLUETOOTH device.

“USB >” “REPT”

(Playback mode)

 “NONE”: Plays back all tracks.

 “ONE”: Repeats one track.

 “FLDER”: Repeats all tracks in a folder.

 “RANDM”: Repeats all tracks in a folder in random order.

 “ALL”: Repeats all tracks.

Menu items Function

Note

19

US

Settings and Adjustments

“SYS >”

(System)

“ASTBY”

(Auto standby)

“ON”: Turns on the auto standby function. When you do

not operate the system for about 20 minutes, the system

enters standby mode automatically.

“OFF”: Off.

“VER”

(Version)

The current firmware version information appears in the

front panel display.

Menu items Function

20

US

Using the Control for

HDMI function

Connecting a device such as a TV or

Blu-ray Disc player compatible with the

Control for HDMI function* by HDMI

cable (High Speed HDMI Cable with

Ethernet, not supplied) enables you to

easily operate the device by a TV remote

control.

The following functions can be used

with the Control for HDMI function.

 System Power Off function

 System Audio Control function

 Audio Return Channel

 One-Touch Play function

* Control for HDMI is a standard used by

CEC (Consumer Electronics Control) for

allowing HDMI (High-Definition

Multimedia Interface) devices to control

each other.

These functions may work with devices

other than those manufactured by Sony,

but operation is not guaranteed.

Set “HDMI>” – “CTRL” on the system to

“ON” (page 18). The default setting is

“ON”.

Enable the Control for HDMI function

settings for the TV and other device

connected to the system.

If you enable the Control for HDMI

(“BRAVIA” sync) function when using a TV

manufactured by Sony, the Control for

HDMI function of the system is also

enabled automatically. When settings are

completed, “DONE” appears in the front

panel display.

When you turn off the TV, the system

will turn off automatically.

Set “HDMI>” – “TVSTB” on the system to

“ON” or “AUTO” (page 18). The default

setting is “AUTO”.

If you turn on the system while you are

watching the TV, the TV sound will be

output from the speakers of the system.

The volume of the system can be

adjusted using the TV’s remote control.

If the TV sound was output from the

speakers of the system the previous

time you watched the TV, the system

will be turned on automatically when

you turn on the TV again.

Operations can also be made by the

TV’s menu. For details, refer to the

operating instructions of your TV.

 Sound is only output from the TV if other

than “TV” input is selected when using

the Twin Picture function on the TV. When

you disable the Twin Picture function, the

sound is output from the system.

 The number for the system’s volume level

is displayed on the TV screen depending

on the TV. The volume number displayed

on the TV may differ from the number on

the front panel display of the system.

Other Functions

Note

Preparing to use the Control

for HDMI function

Tip

System Power Off function

System Audio Control

function

Notes

La page charge ...

Sony HT-RT3 Mode d'emploi

Sony HT-RT3 Mode d'emploi

dans d''autres langues

Documents connexes