Sony HT-X8500 Mode d'emploi

E:\Works\4746091112\4746091112HTX8500UC2\00COV-

HTX8500UC2\110BCO.fm

masterpage: Left

4-746-091-11(2)

http://www.sony.net/

Printed in Malaysia

Imprimé en Malaisie

HT-X8500

4-746-091-11(2)

F:\#Sagyou\1102\4746091111\4746091111HT8500UC2\00COV-

HTX8500UC2\010COV.fm

masterpage:

Right

HT-X8500

4-746-091-11(1)

HT-X8500

Operating Instructions US

Manuel d’instructions FR

Manual de instrucciones ES

Sound Bar

Barre de son

Barra de sonido

2

US

Owner’s Record

The model and serial numbers are

located on the bottom of the Sound Bar.

Record the serial numbers in the space

provided below. Refer to them

whenever you call upon your Sony

dealer regarding the Sound Bar.

Model No. HT-X8500

Serial No.

To reduce the risk of fire or electric

shock, do not expose this Sound Bar

to rain or moisture.

The AC adapter is not disconnected

from the mains as long as it is

connected to the AC outlet, even if the

Sound Bar itself has been turned off.

To reduce the risk of fire, do not cover

the ventilation opening of the Sound

Bar with newspapers, tablecloths,

curtains, etc.

Do not expose the Sound Bar to naked

flame sources (for example, lighted

candles).

To reduce the risk of fire or electric

shock, do not expose this Sound Bar to

dripping or splashing, and do not place

objects filled with liquids, such as vases,

on the Sound Bar.

As the main plug of AC power adapter is

used to disconnect the AC power

adapter from the mains, connect it to an

easily accessible AC outlet. Should you

notice an abnormality in it, disconnect it

from the AC outlet immediately.

Do not install the Sound Bar in a

confined space, such as a bookcase or

built-in cabinet.

CAUTION

Risk of explosion if the battery is

replaced by an incorrect type.

Do not expose batteries or appliances

with battery-installed to excessive heat,

such as sunshine and fire.

Indoor use only.

For the Sound Bar

The nameplate is located on the bottom

of the Sound Bar.

For the AC adapter

Labels for AC adapter Model No. and

Serial No. are located at the bottom of

AC adapter.

For the customers in the U.S.A.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near

water.

6) Clean only with dry cloth.

7) Do not block any ventilation

openings. Install in accordance with

the manufacturer’s instructions.

8) Do not install near any heat sources

such as radiators, heat registers,

stoves, or other apparatus (including

amplifiers) that produce heat.

9) Do not defeat the safety purpose of

the polarized or grounding-type

plug. A polarized plug has two

blades with one wider than the

other. A grounding type plug has

two blades and a third grounding

prong. The wide blade or the third

prong are provided for your safety. If

the provided plug does not fit into

your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being

walked on or pinched particularly at

WARNING

3

US

plugs, convenience receptacles, and

the point where they exit from the

apparatus.

11) Only use attachments/accessories

specified by the manufacturer.

12) Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the

apparatus. When a cart is used, use

caution when moving the cart/

apparatus combination to avoid

injury from tip-over.

13) Unplug this apparatus during

lightning storms or when unused for

long periods of time.

14) Refer all servicing to qualified service

personnel. Servicing is required

when the apparatus has been

damaged in any way, such as power-

supply cord or plug is damaged,

liquid has been spilled or objects

have fallen into the apparatus, the

apparatus has been exposed to rain

or moisture, does not operate

normally, or has been dropped.

NOTE:

This Sound Bar has been tested and

found to comply with the limits for a

Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are

designed to provide reasonable

protection against harmful interference

in a residential installation. This Sound

Bar generates, uses and can radiate

radio frequency energy and, if not

installed and used in accordance with

the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that

interference will not occur in a particular

installation. If this Sound Bar does cause

harmful interference to radio or

television reception, which can be

determined by turning the Sound Bar off

and on, the user is encouraged to try to

correct the interference by one or more

of the following measures:

– Reorient or relocate the receiving

antenna.

– Increase the separation between the

Sound Bar and receiver.

– Connect the Sound Bar into an outlet

on a circuit different from that to

which the receiver is connected.

– Consult the dealer or an experienced

radio/TV technician for help.

Properly shielded and grounded cables

and connectors must be used for

connection to host computers and/or

peripherals in order to meet FCC

emission limits.

If you have any questions about this

Sound Bar:

Visit: www.sony.com/support

Contact: Sony Customer Information

Service Center at 1-800-222-SONY

(7669)

Write: Sony Customer Information

Service Center 12451 Gateway Blvd., Fort

Myers, FL 33913

Supplier’s Declaration of Conformity

Trade Name: SONY

Model No.: HT-X8500

Responsible Party: Sony Electronics Inc.

Address: 16535 Via Esprillo, San Diego,

CA 92127 USA

Telephone No.: 858-942-2230

This device complies with Part 15 of the

FCC Rules. Operation is subject to the

following two conditions: (1) This device

may not cause harmful interference,

and (2) this device must accept any

interference received, including

interference that may cause undesired

operation.

CAUTION

You are cautioned that any changes or

modifications not expressly approved in

US

4

US

this manual could void your authority to

operate this Sound Bar.

This Sound Bar must not be co-located

or operated in conjunction with any

other antenna or transmitter.

This Sound Bar complies with FCC

radiation exposure limits set forth for an

uncontrolled environment and meets

the FCC radio frequency (RF) Exposure

Guidelines. This Sound Bar should be

installed and operated keeping the

radiator at least 20cm or more away

from person’s body.

For the customers in Canada

Properly shielded and grounded cables

and connectors must be used for

connection to host computers and/or

peripherals.

This Sound Bar contains licence-exempt

transmitter(s)/receiver(s) that comply

with Innovation, Science and Economic

Development Canada’s license-exempt

RSS(s). Operation is subject to the

following two conditions:

This Sound Bar complies with ISED

radiation exposure limits set forth for an

uncontrolled environment and meets

RSS-102 of the ISED radio frequency (RF)

Exposure rules. This Sound Bar should

be installed and operated keeping the

radiator at least 20cm or more away

from person’s body.

(1) This Sound Bar may not cause

interference; and

(2) This Sound Bar must accept any

interference, including interference

that may cause undesired operation

of the Sound Bar.

5

US

Table of Contents

About These Operating

Instructions ..............................5

What’s in the Box ..........................6

What You Can Do with the Sound

Bar ............................................ 7

Guide to Parts and Controls ..........8

Connecting to a TV or AV

Device

Connecting Sony TV with the

BLUETOOTH Function

Wirelessly .............................. 14

Connecting a 4K TV and 4K

Devices ...................................17

Connecting a TV Compatible with

eARC ...................................... 18

Mounting the Sound Bar on a

Wall ........................................ 19

When the TV Remote Control does

not Work ................................20

Listening to the Sound

Listening to a TV and Other

Devices ...................................21

Enjoying the Surround Sound .....22

Adjusting the Sound ....................24

Listening to Music/Sound

with the BLUETOOTH®

Function

Listening to Music from a Mobile

Device ....................................26

Changing the Settings of the

BLUETOOTH Function ............28

Using the Various Functions

Using the Control for HDMI

Function .................................29

Using the “BRAVIA” Sync

Function ................................. 31

Saving Power Consumption ........ 31

Troubleshooting

Troubleshooting ..........................32

Resetting the Sound Bar ............. 37

Additional Information

Specifications ...............................38

Supported Input Audio

Formats ..................................40

Supported HDMI Video

Formats .................................. 41

On BLUETOOTH

Communication .....................43

Precautions ..................................44

About These Operating

Instructions

•The instructions in these Operating

Instructions describe the controls on

the remote control.

•Some illustrations are presented as

conceptual drawings, and may be

different from the actual products.

•The default settings are underlined on

each feature description.

Example: Vertical surround off

Connecting to a

TV or AV Device

with the HDMI

Cable



Startup Guide

(separate

document)

6

US

What’s in the Box

•Sound Bar (1)

• Remote control (1)

• R03 (size AAA) battery (2)

• HDMI cable (supports the specification

equal to Premium High Speed HDMI

Cable with Ethernet) (1)

• AC adapter (1)

• AC power cord (mains lead) (1)

• WALL MOUNT TEMPLATE (1)

•Startup Guide

• Operating Instructions

7

US

What You Can Do with the Sound Bar

“Listening to a TV and Other

Devices” (page 21)

Blu-ray Disc™ player, cable

box, satellite box, etc.

“Using the Control for HDMI

Function” (page 29)

“Using the “BRAVIA” Sync

Function” (page 31)

“Listening to Music from a

Mobile Device” (page 26)

“Connecting Sony TV

with the BLUETOOTH

Function Wirelessly”

(page 14)

Basic connection: Refer to

“Startup Guide” (separate

document).

Other connections: See

“Connecting to a TV or AV

Device” (page 14).

The Sound Bar supports object-based audio formats such as Dolby Atmos and

DTS:X as well as HDR video formats such as HDR10, HLG, and Dolby Vision.

8

US

Guide to Parts and Controls

Details are omitted from the illustrations.

Front

 Remote control sensor

Point the remote control at the

remote control sensor to operate

the Sound Bar.

 (power) button

Turns on the Sound Bar or sets it to

standby mode.

 (input select) button

(page 21)

 BLUETOOTH button (page 26)

 +/– (volume) buttons

Sound Bar

9

US

 Indicators

A lighting or flashing of the indicators on the Sound Bar indicates the following

state.

Currently selected input

Sound format, surround effect

Volume

Indicators Status

Lights while TV input is selected.

Lights while HDMI input is selected.

Lights while BLUETOOTH input is selected.

Light while the Sound Bar is connected to the TV with the BLUETOOTH

function (TV input is selected).

Indicators/colors Status

White Lights while the Dolby Atmos format is playing and the virtual

surround processing is activated.

White Lights while the DTS:X format is playing.

Green Lights while the DTS format is playing and the sound effect setting is

set to “DTS Virtual:X” (page 23).

Orange Lights while the DTS:X format is playing and the sound effect setting

is set to “DTS Virtual:X” (page 23).

White Lights while the vertical surround function is set to on (page 22).

Indicators Status

Indicate the volume level by the flashing

indicators when adjusting the volume by

pressing

 +/–.

As the volume level is turned up, the flashing

indicators increase (from left to right).

• Flash repeatedly while the sound is muted.

• Flash twice when the volume level is set to

minimum.

Flash twice when the volume level is set to

maximum.

10

US

Setting value for each function

The changed setting for each function is indicated as the status of the indicators. The

following status indicates the on/off setting for each function.

For the status when the settings other than the on/off setting are changed, see the

description for each function.

Indicators Status

• Flash twice when the function is set to on

(for the function other than the night/voice

mode).

• Light for 2 seconds when the function is set

to on (for the night/voice mode).

• Flash twice when the function is set to off

(for the function other than the night/voice

mode).

• Light for 2 seconds when the function is set

to off (for the night/voice mode).

11

US

Rear

 DC IN terminal

 TV IN (OPT) jack

 HDMI IN jack

Peel the sticker when connecting

the device to the HDMI IN jack.

For specifications and notes on

connections, see “Supported HDMI

Video Formats” (page 41).

 HDMI OUT (TV eARC/ARC) jack

Connect a TV that has an HDMI

input jack with an HDMI cable.

The Sound Bar is compatible with

eARC and ARC. ARC is the function

that sends TV sound to an AV device

such as the Sound Bar from the TV’s

HDMI jack. eARC is an extension of

ARC and enables transmission of

the object audio and multi-channel

LPCM content that cannot be

transmitted with ARC. For details of

eARC, see “Connecting a TV

Compatible with eARC” (page 18).

For supported audio formats, see

“Supported Input Audio Formats”

(page 40). For specifications and

notes on connections, see

“Supported HDMI Video Formats”

(page 41).

 IR repeater (page 20)

Transmits the remote signal of the

TV remote control to the TV.

12

US

Some buttons function differently

depending on how long the button is

pressed. The icons below indicate how

long to press the button.

• : Press the button.

• : Press and hold the button for 5

seconds.

 INPUT (page 21)

Selects the playback source. When

you press INPUT once, the current

input indicator flashes.

Press INPUT again to select the

device you want.

Each time you press INPUT, the

input changes cyclically as follows.

TV input  HDMI input 

BLUETOOTH input

 VERTICAL S.

: Turns on/off the vertical

surround function. (page 22)

: Selects the sound effect

setting. (page 23)

 AUTO SOUND

: Selects AUTO SOUND for the

sound mode. (page 22)

: Turns on/off the AAC codec

function. (page 28)

 VOICE

: Turns on/off the voice mode.

(page 24)

: Turns on/off the Control for

HDMI function. (page 29)

  (volume) +*/–

Adjusts the volume.

 BASS (page 24)

Adjusts the level of the bass tone.

 INDICATORS

: Turns on/off the indicators on

the Sound Bar.

: Turns on/off the auto standby

function. (page 31)

 GAME

: Selects GAME for the sound

mode. (page 22)

: Selects the HDMI standby

through setting. (page 30)

Remote Control

13

US

 SPORTS

: Selects SPORTS for the sound

mode. (page 22)

: Turns on/off the eARC

function. (page 29)

 A/V SYNC (page 25)

Adjusts the delay between the

picture and sound.

 (power)

Turns on the Sound Bar or sets it to

standby mode.

 CINEMA (page 22)

Selects CINEMA for the sound

mode.

 MUSIC (page 22)

Selects MUSIC for the sound mode.

 NIGHT

: Turns on/off the night mode.

(page 24)

: Turns on/off the BLUETOOTH

standby mode. (page 28)

  (muting)

Turns off the sound temporarily or

turns on the sound.

 AUDIO*

: Selects the audio channel for

Dolby Digital multiplex broadcast.

(page 24)

: Turns on/off the Audio DRC

function. (page 24)

 NEWS

: Selects NEWS for the sound

mode. (page 22)

: Selects the HDMI signal

format setting. (page 18)

 STANDARD

: Selects STANDARD for the

sound mode. (page 22)

: Turns on/off the IR repeater

function. (page 20)

 DTS DIALOG (page 25)

Adjusts the dialog volume while the

DTS:X content is played back.

*The  + and AUDIO buttons have a

tactile dot. Use it as a guide during

operation.

Tip

You can turn the indicators off by pressing

INDICATORS.

Even if the indicators are turned off by

pressing INDICATORS, when you operate

the Sound Bar, the indicators in relation to

the operation light or flash.

About the replacement of

batteries for the remote control

When the Sound Bar does not respond

by operating with the remote control,

replace two batteries with new

batteries.

Use R03 (size AAA) manganese

batteries for replacement.

14

US

Connecting to a TV or AV

Device with the HDMI

Cable

To connect a 4K TV or 4K devices

See “Connecting a 4K TV and 4K

Devices” (page 17).

To connect a TV compatible with

eARC

For the connection, refer to Startup

Guide (separate document). For the

settings, see “Connecting a TV

Compatible with eARC” (page 18).

To connect to a TV other than the above,

refer to Startup Guide (separate

document).

Connecting Sony TV with

the BLUETOOTH Function

Wirelessly

When using Sony TV* with the

BLUETOOTH function, you can listen to

sound of the TV or device that is

connected to the TV by connecting the

Sound Bar and TV wirelessly.

* The TV needs to be compatible with

A2DP (Advanced Audio Distribution

Profile).

To connect the Sound Bar and TV

wirelessly, you need to perform pairing

of the Sound Bar and TV by using the

BLUETOOTH function.

Pairing is the process required to

mutually register the information on

BLUETOOTH devices to be connected

wirelessly in advance.

Connecting to a TV or AV Device

Connecting the Sound Bar

and TV Wirelessly

Blu-ray Disc player,

cable box, satellite

box, etc.

15

US

1 Insert batteries (supplied) into the

remote control.

2 Turn on the TV.

3 Turn on the Sound Bar.

4 Point the remote control at the

remote control sensor on the

Sound Bar, and press and hold the

INPUT on the remote control and

BLUETOOTH button on the Sound

Bar simultaneously for 5 seconds.

The TV and BLUETOOTH indicators

flash twice, the Sound Bar enters

the pairing mode, then the

BLUETOOTH indicator flashes

quickly.

5 On the TV, search the Sound Bar

by performing the pairing

operation.

The list of the BLUETOOTH devices

that are searched appears on the TV

screen.

For the operation method to pair

the BLUETOOTH device to the TV,

refer to the operating instructions of

the TV.

6 Pair the Sound Bar and TV by

selecting “HT-X8500” from the list

on the TV screen.

7 Make sure that the TV and

BLUETOOTH indicators on the

Sound Bar light.

A connection between the Sound

Bar and TV has been established.

8 Select the program or input of the

TV by using the TV remote control.

The sound of the displayed image

on the TV screen is output from the

Sound Bar.

9 Adjust the volume of the Sound

Bar by using the TV remote

control.

When pressing the muting button

on the TV remote control, the sound

is muted temporarily.

•If the TV sound is not output from the

Sound Bar, press INPUT on the remote

control of the Sound Bar repeatedly to

INPUT

BLUETOOTH

button

Remote control sensor

BLUETOOTH

indicator

Notes

16

US

select the TV input and check the status of

the indicators on the Sound Bar.

– The TV and BLUETOOTH indicators light:

The Sound Bar and TV are connected

and TV sound is output from the Sound

Bar.

– The BLUETOOTH indicator flashes

quickly: Perform pairing on the TV.

– The TV indicator lights: Perform the

connecting operation again from the

start.

• When you connect the Sound Bar and TV

with the HDMI cable (supplied), the

BLUETOOTH connection is canceled. To

connect the Sound Bar and TV with the

BLUETOOTH function again, disconnect

the HDMI cable, then perform the

connecting operation from the start.

• To pair another TV after the first TV is

paired, turn off the paired TV, then pair

the new one by following the steps of

mobile device connection (page 26).

You can turn the Sound Bar on/off,

adjust the volume, and mute the sound

by using the TV remote control when

connecting the TV to the Sound Bar

wirelessly.

1 Turn the TV on with the TV remote

control.

The Sound Bar is turned on by

interlocking with the TV power and

TV sound is output from the Sound

Bar.

2 Select the program or input of the

TV by using the TV remote control.

The sound of the image displayed

on the TV screen is output from the

Sound Bar.

3 Adjust the volume of the Sound

Bar by using the TV remote

control.

When pressing the mute button on

the TV remote control, the sound is

muted temporarily.

Tip

When the TV is turned off, the Sound Bar is

also turned off by interlocking with the TV

power.

Listening to the Sound of the

TV or Device that is

Connected to the TV

17

US

Connecting a 4K TV and

4K Devices

All HDMI jacks on the Sound Bar support

4K video format, HDCP2.2, and HDCP2.3

(High-bandwidth Digital Content

Protection System Revision 2.2 and 2.3).

To watch 4K video content, connect the

4K TV and 4K devices to the Sound Bar

via an HDCP2.2 or HDCP2.3-compatible

HDMI jack on each device. You can only

view 4K video content through the

HDCP2.2 or HDCP2.3-compatible HDMI

jack connection.

 HDMI cable (supplied)

 HDMI cable (not supplied)

Use an HDMI cable which supports the 4K video

format that you want to watch. For details, see

“Supported HDMI Video Formats” (page 41).

 Optical digital cable (not supplied)

1 Check which HDMI IN jack on your

TV is compatible with HDCP2.2 or

HDCP2.3.

Refer to the operating instructions

of the TV.

2 Connect the HDCP2.2 or HDCP2.3-

compatible HDMI IN jack on the TV

and HDMI OUT (TV eARC/ARC) jack

on the Sound Bar with the HDMI

cable (supplied).

If the HDCP2.2 or HDCP2.3-

compatible HDMI IN jack on the TV

supports eARC or ARC, TV connection

is complete. Go to step 4.

3

The HDCP2.2 or HDCP2.3-

compatible HDMI IN jack on the TV

does not support eARC or ARC,

connect the optical digital output

jack on the TV and the TV IN (OPT)

jack on the Sound Bar with an

optical digital cable (not supplied).

When connecting the TV and Sound

Bar with the HDMI cable (supplied)

only, the TV sound is not output

from the Sound Bar. Connect an

optical digital cable (not supplied).

TV connection is complete.

4 Connect the HDCP2.2 or HDCP2.3-

compatible HDMI OUT jack of the

4K device and HDMI IN jack of the

Sound Bar with an HDMI cable

(not supplied).

Refer to the operating instructions of

the 4K device to check that the HDMI

OUT jack of the 4K device is

compatible with HDCP2.2 or HDCP2.3.

4K device connection is complete.

5 Insert batteries into the remote

control.

HDCP2.2 or HDCP2.3-

compatible HDMI jack

Blu-ray Disc player, cable

box, satellite box, etc.

HDCP2.2 or HDCP2.3-

compatible HDMI jack

TV

18

US

6 Turn on the TV.

7 Turn on the Sound Bar.

Tip

4K content can be watched by a device

compatible with HDCP2.2 or HDCP2.3 even

though devices with different versions (ex.

TV compatible with HDCP2.2 and 4K device

compatible with HDCP2.3) are connected.

To watch 4K video content, select the

appropriate setting for the connected

4K TV and 4K device.

Press and hold NEWS for 5 seconds to

select the HDMI signal format setting.

For the relation of the HDMI signal

format setting, supported video format

signals, and HDMI cables to be used, see

“Supported HDMI Video Formats”

(page 41).

• Depending on the TV, the TV setting for

HDMI output may be required. Refer to

the operating instructions of the TV.

• When the picture is not displayed after

“Enhanced format” is set, set it to

“Standard format.”

Connecting a TV

Compatible with eARC

The Sound Bar is compatible with eARC

(Enhanced Audio Return Channel). eARC

is a new function standardized by HDMI

2.1 and supports latest audio formats in

addition to audio formats that are

supported with existing ARC (Audio

Return Channel).

You can enjoy object audio content

such as Dolby Atmos - Dolby TrueHD

and DTS:X, or multi-channel LPCM

content that cannot be transmitted with

ARC by connecting the Sound Bar and

TV compatible with eARC using an HDMI

cable.

For the connection, refer to Startup

Guide (separate document).

The default setting of the eARC

function is on. If the eARC function is

set to off, press and hold SPORTS for 5

seconds to set the eARC function to on

(page 29).

The eARC function is enabled and it

works while connecting a TV compatible

with eARC.

The ARC function works while

connecting a TV compatible with ARC

(not compatible with eARC).

When the eARC function is set to on, make

sure to check the eARC setting of the

connected TV. For details, refer to the

operating instructions of the TV.

Setting the HDMI Signal

Format to Watch 4K Video

Content

Standard format

Select when the connected TV and devices

support standard bandwidth video formats.

The Dolby ATMOS and DTS:X indicators flash.

Enhanced format

Select when both the connected TV and

devices support high bandwidth video

formats such as 4K 60p 4:4:4, etc.

The HDMI and BLUETOOTH indicators flash.

Notes

Preparing to Use the eARC

Function

Note

19

US

Mounting the Sound Bar

on a Wall

You can mount the Sound Bar on a wall.

• Prepare screws (not supplied) that are

suitable for the wall material and

strength. As a plasterboard wall is

especially fragile, attach the screws

securely in the wall beam. Install the

speakers horizontally, hung by screws in

studs in a continuous flat section of the

wall.

• Have the installation done by a Sony

dealer or licensed contractor and pay

special attention to safety during the

installation.

• Sony shall not be held responsible for

accidents or damage caused by improper

installation, insufficient wall strength,

improper screw installation or natural

disaster, etc.

1 Prepare two screws (not supplied)

that are suitable for the wall

mount holes on the rear of the

Sound Bar.

2 Stick WALL MOUNT TEMPLATE

(supplied) on a wall.

1 Align TV CENTER LINE () of

WALL MOUNT TEMPLATE with the

center line of your TV.

2 Align TV BOTTOM LINE () of

WALL MOUNT TEMPLATE with the

bottom of your TV, then stick

WALL MOUNT TEMPLATE on a

wall by using a commercially

available adhesive tape, etc.

Notes

Hole on the rear of the Sound Bar

4mm (3/16 in)

More than 30 mm (1 3/16 in)

5.1 mm

(13/64 in)

10 mm

(13/32 in)

Center of the TV

WALL MOUNT

TEMPLATE

Adhesive tape,

etc.

20

US

3 Fasten the screws into the marks

() on SCREW LINE () of WALL

MOUNT TEMPLATE as in the

illustration below.

4 Remove WALL MOUNT TEMPLATE.

5 Hang the Sound Bar on the

screws.

Align the holes of the rear of the

Sound Bar with the screws, then

hang the Sound Bar on the two

screws.

When sticking WALL MOUNT TEMPLATE,

smooth it out fully.

When the TV Remote

Control does not Work

When the Sound Bar obstructs the

remote control sensor of the TV, the TV

remote control may not work. In that

case, enable the IR repeater function of

the Sound Bar.

You can control the TV with the TV

remote control by sending the remote

signal from the rear of the Sound Bar.

Press and hold STANDARD for 5

seconds to set the function to on or

off.

• Be sure to check that the TV remote

control cannot control the TV, and then

set the IR repeater function to on. If it is

set to on when the remote control can

control the TV, appropriate operation

may not be obtained because of the

interference between the direct

command from the remote control and

the command via the Sound Bar.

• If the IR repeater function is set to on, this

function may not work depending on

your TV. Also, the remote controls of

other devices such as an air conditioner

may not work correctly. In this case,

change the installation position of the

Sound Bar or TV.

Note

Screws

Marks ()

10 mm to

11 mm

(approx.

7/16 in)

228.5 mm

(9 in)

228.5 mm

(9 in)

IR repeater on

The HDMI and BLUETOOTH indicators flash.

IR repeater off

The Dolby ATMOS and DTS:X indicators flash.

Notes

La page charge ...

Sony HT-X8500 Mode d'emploi

Sony HT-X8500 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents