Lenco SCD-720SI Le manuel du propriétaire

User Manual - Portable Boombox with DAB+/ FM radio,

Bluetooth, CD, cassette and USB Player

DRAAGBARE BOOMBOX MET DAB+/FM-RADIO, BLUETOOTH

®

, CD-,

CASSETTE- EN USB-SPELER

Bedienungsanleitung – Tragbare Boombox mit DAB+- und FM-Radio,

Bluetooth, CD- und USB-Player sowie Kassettenlaufwerk

Mode d’emploi - Boombox portable avec radio DAB+/ FM, Bluetooth,

CD, cassette et lecteur USB

Manual de usuario – Radiocasete portátil con radio DAB+/ FM,

Bluetooth, CD, casete y reproductor USB

Model SCD-720

-2-

V1.0

INDEX

English ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 3

Nederlands•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••20

Deutsch •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••37

Français•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••55

Español •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••72

-3-

ENGLISH

CAUTION:

Usage of controls or adjustments or performance of procedures other than those specied herein may result in

hazardous radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free

space around the whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-

generating products or naked ame. The device can only be used in moderate climates. Extremely cold or

warm environments should be avoided. Working temperature between 0° and 35°C.

4. Avoid using the device near strong magnetic elds.

5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device

following the instruction manual. During le transmission, please handle with care and operate in a static-

free environment.

6. Warning! Never insert an object into the product through the vents or openings. High voltage ows through

the product and inserting an object can cause electric shock and/or short circuit internal parts. For the

same reason, do not spill water or liquid on the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

8. The device shall not be exposed to dripping or splashing and make sure that no objects lled with liquids,

such as vases, are placed on or near the apparatus.

9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with

damp, water droplets or condensation may occur inside the unit and the unit may not function properly;

let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before

getting any power.

10. Although this device is manufactured with the utmost care and checked several times before leaving the

factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an

excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the

main power socket immediately.

11. This device must operate on a power source as specied on the specication label. If you are not sure of

the type of power supply used in your home, consult your dealer or local power company.

12. Keep away from animals. Some animals enjoy biting on power cords.

13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based uids. To remove severe

stains, you may use a damp cloth with dilute detergent.

14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modication of the

device or battery replacement.

15. Do not interrupt the connection when the device is formatting or transferring les. Otherwise, data may be

corrupted or lost.

16. If the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don’t

use an USB extension cable because it can cause interference resulting in failing of data.

17. The rating label has been marked on the bottom or back panel of the device.

18. This device is not intended for use by people (including children) with physical, sensory or mental

disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received

instructions about the correct use of the device by the person who is responsible for their safety.

19. This product is intended for non professional use only and not for commercial or industrial use.

20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable

position vibrations or shocks or by failure to follow any other warning or precaution contained within this

user manual will not be covered by warranty.

21. Never remove the casing of this device.

22. Never place this device on other electrical equipment.

23. Do not allow children access to plastic bags.

24. Only use attachments/accessories specied by the manufacturer.

-4-

25. Refer all servicing to qualied service personnel. Servicing is required when the device has been damaged

in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen

into the device, when the device has been exposed to rain or moisture, does not operate normally, or has

been dropped.

26. Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing

loss.

27. If the product is delivered with power cable or AC power adaptor:

• If any trouble occur, disconnect the AC power cord and refer servicing to qualied personnel.

• Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit

point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out

of children’s reach! When playing with the power cable, they can seriously injure themselves.

• Unplug this device during lightning storms or when unused for a long period.

• The socket outlet must be installed near the equipment and must be easily accessible.

• Do not overload ac outlets or extension cords. Overloading can cause re or electric shock.

• Devices with class 1 construction should be connected to a main socket outlet with a protective earthed

connection.

• Devices with class 2 construction do not require a earthed connection.

• Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can

cause a short circuit.

• Do not use a damaged power cord or plug or a loose outlet. Doing so may result in re or electric shock.

28. If the product contains or is delivered with a remote control containing coin/cell batteries:

Warning:

• “Do not ingest battery, Chemical Burn Hazard” or equivalent working.

• The remote control supplied with This product contains a coin/button cell battery. If the battery is swal-

lowed, it can cause severe internal burns in just 2 hours and can lead to death.

• Keep new and used batteries away from children.

• If the battery compartment does not close securely, stop using the product and keep it away from child-

ren.

• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate

medical attention.

29. Caution about the use of Batteries:

• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

• Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude

during use, storage or transportation.

• Replacement of a battery with an incorrect type that can result in an explosion or the leakage of amma-

ble liquid or gas.

• Disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, that can

result in an explosion.

• Leaving a battery in an extremely high temperature surrounding environment that can result in an explo-

sion or that leakage of ammable liquid or gas.

• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of am-

mable liquid or gas.

• Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION:

• Unpack all parts and remove protective material.

• Do not connect the unit to the mains before checking the mains voltage and before all other connections

have been made.

-5-

WARNING FOR CD / DVD PLAYER:

This product contains a low power laser device

CLASS 1 LASER PRODUCT

APPAREIL Á LASER DE CALSSE 1

PRODUCO LASER DE CLASE 1

CAUTION

INVISIBLE LASER RADIATION

WHEN OPEN AND INTERLOCKS

DEFEATED

AVOID EXPOSURE TO BEAM

WARNING: DO NOT TOUCH THE LENS.

WARNING: When participating in the trac listening to a personal music

player can make the listener less aware of potential dangers such as

approaching cars.

WARNING: To prevent possible hearing damage, do not listen at high

volume levels for long periods.

ACCESSORIES:

• Power cord

• Remote control

• Instruction manual

Class 1 Laser Product

-6-

OVERVIEW

1

2 3

4+

SOURCE

MENU

INFO

ENTER

SCAN

VOLUME

1 2 3 4 5 6 7 8 9 10 11 12 13

1. USB input: Input for USB stick

2. SOURCE:

Press this key to choose dierent modes: DAB+/FM/CD/USB/BLUETOOTH/CASSETTE TAPE/AUX IN.

3. MENU / INFO: DAB+: Press to display station information.

Press and hold to enter the Menu for setting change. Press

or to select menu item.

FM: Press to display station information.

Press and hold to enter the Menu for setting change. Press

or to select menu item.

4. PREVIOUS

:

DAB+: Press to display the previous station information.

FM: Short press to tune to a dierent frequency. Press and hold to scan the previous available station.

CD/USB/BT: Press to search to the previous track.

5. POWER

:

Press to turn on the unit. Press again to turn o and go to Standby mode.

6. NUMERIC BUTTONS:

1

2

3

4+

DAB+/FM: Press these buttons will recall the stored radio station directly. Press and hold to save the radio

station.

CD/USB: Press the REPEAT button to change to dierent repeat playback operaton. Press the PROGRAM

button to setup the program playback operation. Press the FOLDER button to change the folder

(only for MP3).

BT: Press and hold the PAIR button will disconnect the current connection and start to search another

new Bluetooth device.

7. DISPLAY: Display the unit operation status and information.

8. CASSETTE CONTROL BUTTONS: (PAUSE / STOP/EJECT / FORWARD / REWIND / PLAY / RECORD)

9. VOLUME: Adjust the main volume.

10. STOP

/ ENTER:

DAB+ / FM: Press to select the change setting in the menu operation.

CD / USB: Press to stop the playback.

11. NEXT

:

DAB+: Press to display the next station information.

FM: Short press to tune to a dierent frequency. Press and hold to scan the next available station.

CD/USB/BT:Press to search to the next track.

12. PLAY-PAUSE/SCAN

:

DAB+: Press to start auto scanning all the available DAB+ stations.

FM: Short press to toggle between stereo and mono audio. Press and hold to start auto scanning all

the available FM stations.

CD/USB/BT Press to toggle between pause and resume playback.

13. CD Disc compartment door

14. Cassette tape compartment door

15. Bass port

16. Loudspeaker

17. Carrying handle

-7-

SOURCE

MENU

INFO

ENTER

SCAN

FOLDER

PAIR

REPEAT

PROGRAM

1

2

3

4+

VOLUME

CASSETTE RECORDER

1416 15 1615

~AC IN

OPEN

AUX IN

17 18 19 20 2221

18. Battery compartment door

19. AUX IN: Connect to external audio player

20. Headphone out: Connect to the external headphone

21. Antenna: The antenna should be extended to ensure a good DAB+ / FM reception

22. ~AC in: Connect the power cord to this jack

REPEAT

RANDOM

VOL

DISPLAY

23

24

25

26

27

28

29

30

31

32

43

42

41

40

39

38

37

36

35

34

44

33

23. Standby

24. Numeric buttons

25. Memory

26. Previous / Tune

27. Folder

28. Repeat

29. Folder

30. Info - Scan - Menu

31. BT Previous - BT Next - BT Play/pause

32. ID3 Tag display - CD/USB Stop - CD/USB Play/pause

33. Volume +/-

34. Mute

35. Random

36. CH-

37. Next / Tune

38. Enter

39. Mono/Stereo

40. CH+

41. Sleep

42. X-Bass

43. Equalizer

44. Source

-8-

BATTERY INSERT

~AC IN

AUX IN

C 1,5V

C 1,5V C 1,5V

C 1,5V

C 1,5V C 1,5V

+

OPEN

+ 1,5V

1,5V + 1,5V + 1,5V +

BATTERY OPERATION:

For DC operation, rstly remove the AC plug from the AC outlet and

disconnect the AC cord from the ~ AC IN jack. Remove the battery

compartment door at the rear of the unit. Install 6pcs UM-2 (LR14)

C size batteries (NOT supplied) according to the polarity markings

shown inside of the compartment. Install the battery compartment

door.

Note:

- Since the unit draws a little power from the batteries in standby

mode, remove the batteries if the unit is not going to be used for

a long time.

- Since the unit is at power saving status when it is in battery stand

by mode, you can ONLY use the unit’s STANDBY button by press

and hold it more than 5 seconds to turn on the unit. To turn o,

press the STANDBY button again.

REMOTE CONTROL OPERATION:

A CR2025 battery is already installed in the remote control unit.

Before using, pull out the battery insulation sheet as shown on the

left.

To replace a new battery, please refer to the gure shown on the left.

When inserting a battery, be sure to do so in the proper direction.

-9-

POWER ON THE SCD-720

~AC IN

OPEN

AUX IN

SOURCE

MENU

INFO

ENTER

SCAN

FOLDER

PAIR

REPEAT

PROGRAM

1

2

3

4+

VOLUME

CASSETTE RECORDER

EAR/HEADPHONE USE

On the back site of the SCD-720 you will nd the headphone connection.

Use a ear set or headphone with 3, 5mm stereo jack to connect the headphone to the SCD-720.

If you put in the 3,5mm stereo jack the speakers of the SCD-720 will turned o.

Only the headphone will work now.

You can control the volume by the volume knob. All other functions are the same as normal use without headset connected.

~AC IN

OPEN

AUX IN

SOURCE

MENU

INFO

ENTER

SCAN

FOLDER

PAIR

REPEAT

PROGRAM

1

2

3

4+

VOLUME

CASSETTE RECORDER

Connect the SCD-720 with the power cable to the AC outlet.

If you connect the power cable into the SCD-720, the batte-

ry power will be automatically shut down.

Press the STANDBY button to turn on the unit.

To turn o, press the STANDBY button again.

With the SOURCE button you can select input source

You can selected:

DAB+ RADIO

FM RADIO

CD

USB

BLUETOOTH

TAPE (CASSETTE)

AUDIO IN (AUX)

VOLUME CONTROL:

Rotate the VOLUME knob to change the volume.

-10-

Adjusting the Antenna

The antenna at the rear panel of the unit should be fully extended to ensure a good DAB+ / FM reception. Alter the antenna

position for the best reception.

DAB+ OPERATION

The rst time the DAB+ mode is selected, it will automatically scan for available DAB+ stations. Wait until the scanning has

nished. The display will show the scanning progress. After scanning it will tune to the rst station.

The available stations in a certain reception band will be shown in the display. In case of weak reception, the station

may falter or give no sound. Try to move the receiver or rotate the antenna so that the weak DAB+ signal comes in

without faltering (station names are still shown when the signal is weak).

Auto Scan

1. Turn on the unit in DAB+ mode.

2. Press and hold the SCAN button (or press the SCAN button on the remote control) to start auto scanning the available

stations.

Manual Scan

By using the manual scan operation, it can help you to adjust the antenna or search station that is missed while auto scanning.

1. Turn on the unit in DAB+ mode.

2. Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control.

3. Press the or button until “Manual” is displayed and then press the ENTER button.

4. Press the or button to select the desired channel (e.g. 12C 227.360MHz) (Selection between 5A and 13F).

5. Press the ENTER button to conrm.

6. To select another channel (5A~13F), press the or button and then press the ENTER button to conrm.

7. When the station is found, press the ENTER button to select.

8. To quit manual scan, press the MENU button.

Tuning

After scanning all the available DAB stations, press the or button to display and navigate the station list. Then press

the ENTER button to tune to this station within a few seconds.

Storing DAB+ Presets

You can save up to 20 DAB+ stations.

To use the unit buttons to store the preset:

1. Tune to the station you wish to store.

2. To save it to the preset 1 or 2 or 3, press and hold the numeric button respectively. Then it will save to that preset number.

3. To save it to other preset channel from 4 to 20, press and hold the numeric button “4”. “Store” will be displayed.

4. Press the or button to select the desired preset number to store.

5. Press the ENTER to store.

To use the remote control button to store the preset:

1. Tune to the station you wish to store.

2. Press and hold the MEMORY button, “Store” will be displayed.

3. Press the or button to select the desired preset number to store.

4. Press the ENTER to store.

Recall Stored DAB+ Presets

To use the unit buttons to recall the preset:

1. To recall the preset channel 1 or 2 or 3, press the numeric button respectively. Then it will tune to that preset channel.

2. To recall other preset channel from 4 to 20, press the numeric button “4”. “Recall” will be displayed.

3. Press the or button to select the desired preset number to recall.

4. Press the ENTER to recall.

To use the remote control button to recall the preset:

1. Press the MEMORY button, “Recall” will be displayed.

2. Press the or button to select the desired preset number to recall.

3. Press the ENTER to recall.

REPEAT

RANDOM

VOL

DISPLAY

REPEAT

RANDOM

VOL

DISPLAY

DAB+ RADIO

-11-

Displaying DAB+ Station Information

There are several types of information as listed below. To change the display information, press the INFO button repeatedly.

Radio Text scrolling

Signal Bar Program Type (PTY)

Multiplex Name Frequency Signal Error Rate Audio Bit Rate

1. Radio Text scrolling: Shows music titles or program details provided by the broadcaster.

2. Signal Bar: Transmission signal level. The more characters are displayed, the stronger the signal being received.

To improve the reception adjust the antenna position.

3. Program Type (PTY): Type of program provided by the broadcaster.

4. Multiplex Name: Displays name of multiplex to which the current station belongs.

5. Frequency: Current channel frequency.

6. Signal Error Rate: Shows the error rate. The larger this value, the more errors it receives. To improve the reception, adjust

the antenna position.

7. Audio Bit Rate: This is the current channel audio Bitrate.

OTHER DAB+ MENU OPERATION

Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control. Then press

the or button for dierent options as described below.

Dynamic Range Control (DRC) (see Note.)

DRC can make quieter sounds easier to hear when the unit is used in a noisy environment. The DRC level of a broadcast is

set by the broadcaster and transmitted with the service. Changing the DRC value on your unit enables you to apply a scaling

factor to this level.

There are three levels of compression:

DRC high: Maximum compression as sent with the transmitted service

DRC low: Set to 1/2 that of the sent transmitted service

DRC o: No compression

1. Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control.

2. Press the or button until “DRC” is displayed and then press the ENTER button.

3. Press the or button to select the DRC value and then press the ENTER to conrm.

4. Press the MENU button to exit the menu control.

Note:

- Not all DAB+ broadcasts are able to use DRC function. If the broadcast does not support DRC then the DRC setting in the

unit will have no eect.

- After you have adjusted the DRC level the sound may be louder.

Prune

This function removes inactive stations.

1. Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control.

2. Press the or button until “Prune” is displayed and then press the ENTER button.

3. Press the or button to select “Yes” and then press the ENTER button to prune the unit.

4. Press the MENU button to exit the menu control.

-12-

Adjusting the Antenna

The antenna at the rear panel of the unit should be fully extended to ensure a good DAB+ / FM reception. Alter the antenna

position for the best reception.

FM RADIO OPERATION

Auto Scan

1. Turn on the unit in FM mode.

2. Press and hold the SCAN button to start auto-scanning and saving the available stations (max. 20 storage).

Manual Scan

1. Press the or button repeatedly to tune to a dierent frequency.

2. Alternatively press and hold the or button to automatically search to the next available station.

Storing FM Presets

You can save up to 20 FM stations.

To use the unit buttons to store the preset:

1. Tune to the station you wish to store.

2. To save it to the preset 1 or 2 or 3, press and hold the numeric button respectively. Then it will save to that preset number.

3. To save it to other preset channel from 4 to 20, press and hold the numeric button “4”. “Store” will be displayed.

4. Press the or button to select the desired preset number to store.

5. Press the ENTER to store.

To use the remote control button to store the preset:

1. Tune to the station you wish to store.

2. Press and hold the MEMORY button, “Store” will be displayed.

3. Press the or button to select the desired preset number to store.

4. Press the ENTER to store.

Recall Stored FM Presets

To use the unit buttons to recall the preset:

1. To recall the preset channel 1 or 2 or 3, press the numeric button respectively. Then it will tune to that preset channel.

2. To recall other preset channel from 4 to 20, press the numeric button “4”. “Recall” will be displayed.

3. Press the or button to select the desired preset number to recall.

4. Press the ENTER to recall.

To use the remote control button to recall the preset:

1. Press the MEMORY button, “Recall” will be displayed.

2. Press the or button to select the desired preset number to recall.

3. Press the ENTER to recall.

Stereo/Force Mono Selection

When receiving a Stereo FM radio station, press the button on the unit (or MONO/ST. button on the remote control) will

switch between stereo audio and force mono audio.

Displaying FM Station Information

There are several types of information as listed below. To change the display information press the INFO button repeatedly.

Radio Text

Program Type (PTY)

Frequency

Audio Type

1. Radio Text: Scrolling text which shows information about music titles or program details provided by the radio

station

2. Program Type (PTY): Type of program provided by the broadcaster

3. Frequency: Current channel frequency

4. Audio Type: Stereo or Mono

OTHER FM MENU OPERATION

Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control. Then press

the

or button for dierent options as described on next page.

REPEAT

RANDOM

VOL

DISPLAY

REPEAT

RANDOM

VOL

DISPLAY

FM RADIO

-13-

Scan Setting

1. Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control.

2. Press the or button until “Scan” is displayed and then press the ENTER button.

3. Press the or button to toggle between “Strong” and “All” and then press the ENTER button conrm. When the

“Strong” is selected, only the strong stations are detected. Scanning will ignore the noisy stations. When “All” is selected,

all stations will be detected during FM scanning even if the radio station is a bit noisy.

4. The next time doing a FM scan the unit will search for the stations based on this conrmed setting.

Audio Setting

1. Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control.

2. Press the or button until “Audio” is displayed and then press the ENTER button.

3. Press the

or button to toggle between “Stereo” or “Mono” selection and then press the ENTER button conrm.

CD/USB OPERATION

Loading and Playing CD Disc

Open the CD door. Install a disc with the CD label side facing up. Close the CD door. Press the SOURCE button to CD mode.

After reading, the total number of tracks will be shown on the display and it will automatically start to play.

Reading and Playing USB Device

Insert a USB device into the USB input jack. Press the SOURCE button to USB mode. After reading the total number of tracks

will be shown on the display. It will automatically start to play.

Play/Pause Control

To pause playback press the button. Press the button again to resume playback.

Stop Control

To stop playback press the button.

Skip Track

During playback press the or button to skip to the previous or next track.

High Speed Music Search

During playback press  hold the or button to start high speed searching.

When you release the or button normal speed playback will resume.

Repeat Play / Random Play

CD Disc mode

During playback press the REPEAT button once, the display shows “REP.ONE”. The current track will be played repeatedly.

When pressing the REPEAT button again, the display shows “REP.ALL”. All tracks will be played repeatedly.

When pressing the REPEAT button again, the display shows “RANDOM”. All tracks will be played in random sequence.

When pressing the REPEAT button again, the unit will resume to normal playback.

MP3 Disc or MP3 USB mode

During playback press the REPEAT button once, the display shows “REP.ONE”. The current track will be played repeatedly.

When pressing the REPEAT button again, the display shows “REP.ALBUM”. All tracks in the current folder will be played

repeatedly.

When pressing the REPEAT button again, the display shows “REP.ALL”. All tracks will be played repeatedly.

When pressing the REPEAT button again, the display shows “RANDOM”. All tracks will be played in random sequence.

When pressing the REPEAT button again, the unit will resume to normal playback.

Programmed Playback

CD Disc mode

This unit can be programmed to play a sequence of tracks selected.

1. In stop mode press the PROGRAM button, the display shows the program number and the track number.

2. Press the or button to select the desired track.

3. Press the PROGRAM button to save the desired track.

4. Repeat steps 2-3 to store up to 30 programmed tracks.

5. Press the button to start playing the programmed tracks.

6. To clear the program play, press the button twice or change to another mode.

7. During program play you can also do the “Repeat One” or “Repeat All” operation, however the random play is not

supported.

-14-

MP3 Disc or MP3 USB mode

1. In stop mode press the PROGRAM button, the display shows the program number and the folder number.

2. Press the FOLDER button (or the FOLDER˄ / FOLDER˅ button on the remote control) to select the desired folder.

3. Press the PROGRAM button to save the desired folder.

4. Press the or button to select the desired track.

5. Press the PROGRAM button to save the desired track.

6. Repeat steps 2-3 to program up to 99 programmed tracks.

7. Press the button to start playing the programmed tracks.

8. To clear the program play, press the

button twice or change to another mode.

9. During program play you can also do the “Repeat One” or “Repeat All” operation, however the random play is not

supported.

Note:

- The USB port is only for playback purpose, NOT for external device charging

- Besides playing CDDA audio disc, the unit can also play MP3 le format in CD / USB operation. However, WMA le and

others are not supported.

- If your USB device is loaded with MP3’s but the display keeps showing “NO” on the display, the format of your USB device

might not be compatible with the unit.

- The unit supports USB version 1.1 and 2.0.

- The unit supports USB devices with capacity up to 32GB.

- The unit may not be compatible with all USB devices, this is not a problem of the unit.

- For MP3 playback, a maximum of 255 folders with a maximum of 999 les is supported.

- Due to the USB le read/write mechanism, the rst le written to the usb device will be played rst and the last le written

will be played last. (The unit will not sort alphabetically)

Folder Select (MP3 le only)

During MP3 playback press the FOLDER button (or the FOLDER˄ / FOLDER˅ button on the remote control) to change to the

folder.

In stop mode press the FOLDER button (or the FOLDER˄ / FOLDER˅ button on the remote control) to change to the folder.

Then press the or button to select your desired track to play. Press the button to start track playback.

ID3 Tag Display (MP3 le only in which the ID3 Tag information is included)

Press the DISPLAY button on the remote control will toggle the ID3 Tag display on/o. When it is on, the MP3 track’s title,

artist and album details will be displayed.

BLUETOOTH

Please follow the pairing instructions below to link the unit to your Bluetooth device.

1. Press the SOURCE button repeatedly to enter the Bluetooth mode. The display will show “BT AUDIO”. It will start

searching and will display a ashing “BT AUDIO”.

2. If the unit has never been paired with a Bluetooth device before or cannot nd the last paired device, the display and the

Bluetooth status indicator will keep on ashing. Turn on the Bluetooth function of your device and enable the search until

“Lenco SCD-720” is found. Select “Lenco SCD-720” on the Bluetooth device to make connection. Enter the pass code

“0000” if required.

3. After successfully paired the unit will display the steady “BT AUDIO”.

4. You can now start playing music from your smartphone wirelessly to the speaker.

5. You can press the button to pause or resume the playback.

6. You can press the or button to search to the previous or next song.

Note:

• Press and hold the PAIR button will disconnect the current connection and start to search another new Bluetooth

device.

• This product has a bluetooth reception function, you cannot transmit any bluetooth sound with it (Bluetooth headset or

earset don’t receive signal of the SCD-720): this means that you can receive wirelessly a bluetooth sound signal from

an external source like a smartphone.

-15-

CASSETTE TAPE

Press the SOURCE button repeatedly to enter the Cassette tape mode. The display will show “TAPE”. The cassette control

buttons are location at the top front of the unit.

1. Press the CASSETTE STOP/EJECT

button to open the cassette tape door.

2. Insert the cassette tape and close the door rmly.

Play side is facing forward

Insert the cassette tape with the tape side

facing up

3. Press the CASSETTE PLAY

button to playback.

4. Press the CASSETTE PAUSE

button to pause the playback. To resume the playback, press the CASSETTE PAUSE

button to release it.

5. To stop playback, press the CASSETTE STOP/EJECT

button.

6. While it is in stop mode, press the CASSETTE FORWARD

or REWIND button to forward or rewind the tape.

7. To open the cassette door during stop, press the CASSETTE STOP/EJECT

button once.

8. To open the cassette door during playback, press the CASSETTE STOP/EJECT

button twice.

9. To record, press the CASSETTE PLAY

and RECORD button together.

NOTE:

- Only type 1 Normal cassette tape can be used for recording.

- If there is tape slack, rewind the slack using a pencil to avoid damaging the tape or the unit.

- On the back of the cassette are left and right tabs. This tab can be broken out. If this tab is broken out, it is no longer

possible to record on that side of the cassette. When both tabs are removed, it is no longer possible to record to the

cassette. The RECORD

button then locks and cannot be pressed anymore.

-16-

OTHER FUNCTIONS

AUX IN

This allows you to connect the sound from an external player through your unit.

1. Plug a 3.5mm audio cable (not included) into your external player line out and the other end into the AUX IN jack.

2. Press the SOURCE button to enter AUX mode. Display shows “AUDIO IN”.

3. Start your external player to play music.

4. The unit plays the sound.

EQ OPERATION / X BASS

You can enjoy dierent EQ sound eect modes. Press the EQUALIZER button on the remote control will change to dierent

sound eects of FLAT / ROCK / CLASSIC / POP / VOCAL / JAZZ.

You can also boost the bass eect of the music. Press the X BASS button on the remote control will toggle the X Bass eect

between ON and OFF.

Note:

- When X-Bass is enabled, the EQ sound eect will be disabled. Pressing EQUALIZER button will only show X-Bass On

without any EQ eect. To resume the EQ sound eect, press the X-BASS button to turn o rst.

SLEEP FUNCTION

1. When the unit is switched on, press the SLEEP button on the remote control repeatedly to select a sleep duration from

either SLEEP OFF, 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes. When the sleep timer is set, the remaining timer will

periodically be shown on the display.

2. When the sleep timer is zero, the unit will turn o automatically.

3. To cancel the sleep function, press the STANDBY button to turn o the unit. Or press the SLEEP button repeatedly to

select “SLEEP OFF”.

LANGUAGE SETUP

You can set the language of the unit.

1. Turn on the unit in DAB+ mode or FM mode.

2. Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control.

3. Press the

or button until “System” is displayed and then press the ENTER button.

4. Press the

or button until “Language” is displayed and then press the ENTER button.

5. Press the or button to toggle between dierent languages. Select your desired language and then press the

ENTER button to conrm.

6. Press the MENU button to exit the menu control.

SOFTWARE VERSION CHECK

You can check the software version of the unit.

1. Turn on the unit in DAB+ mode or FM mode.

2. Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control.

3. Press the

or button until “System” is displayed and then press the ENTER button.

4. Press the

or button until “SW ver” is displayed and then press the ENTER button to show the software version

number.

5. Press and hold the MENU button (or press the MENU button on the remote control) to exit the menu control

FACTORY RESET

This function resets the unit to the original factory settings.

1. Turn on the unit in DAB+ mode or FM mode.

2. Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control.

3. Press the or button until “System” is displayed and then press the ENTER button.

4. Press the

or button until “Reset” is displayed and then press the ENTER button.

5. Press the

or button until “Yes” is displayed and then press the ENTER button to reset the unit.

ENERGY SAVING

Due to ErP requirement and protect the environment, the unit will turn o to the standby mode automatically once no music

has been playing around 15 minutes.

When the unit is power o due to ErP, you can press the STANDBY

button to turn on the unit again.

-17-

FUNCTIONS REMOTE CONTROL

Standby: Press the STANDBY button to turn on the unit.

To turn o, press the STANDBY button again.

Source: Selection of user function: DAB+ RADIO, FM-RA-

DIO, CD, USB, BLUETOOTH, TAPE (CASSET-

TE), AUDIO IN (AUX).

Equalizer: EQ setup: FLAT / ROCK / CLASSIC / POP / VO-

CAL / JAZZ.

X-Bass: Super bass on/o.

Sleep: Sleep time setup: 90-80-70-60-50-40-30-20-10 min.

Mono/Stereo: Mono Stereo selection for FM radio only.

Folder ˄˅: Folder selection for USB and MP3-CD.

Memory: CD: programm CD tracks.

DAB+: programm presets or recall presets.

FM: programm presets or recall presets.

Tune˅ / tune˄: CD/USB/BT: track backward or next.

( / ) DAB+: Select scanned stations

FM: Freq. up/down with 50kHz.

CH+ / CH-: DAB+/FM: Recall presets.

CD/USB/BT: No function.

Repeat : CD: Repeat one or Repeat all.

USB: Repeat one, album or repeat all.

Random: CD/USB: Random function on/o.

DAB/FM FUNCTIONS:

INFO: Show data information when receiving dab+ stati-

on.

SCAN: Scanning all dab+ stations.

MENU: Acces to menu functions in combination with

buttons or and ENTER button.

DAB+/FM functions and setup functions.

BLUETOOTH FUNCTIONS:

: backward.

: next.

: play/pause function.

CD/USB FUNCTIONS:

DISPLAY: ID-3 tag on or o.

: Stop function.

: Pause/play function.

VOLUME:

VOL +: Volume up

VOL -: Volume down

REPEAT

RANDOM

VOL

DISPLAY

-18-

No power

● Ensure that the mains cable is securely connected.

● Ensure that the unit is switched on.

The unit does not respond when pressing any buttons.

● Remove the batteries (when inserted) and remove the powercord for a minute. Then reinsert the batteries.

No sound output

● Turn up the volume.

I can’t nd the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing

● Ensure that the unit is switched on.

● Ensure that the Bluetooth function is activated on your Bluetooth device.

● The unit has a Bluetooth function that can receive a signal within 10 metres.

Disc in place but the unit won’t play

● Ensure that the disc label is facing up.

● Ensure that the disc is clean.

● PAUSE mode may be activated, deactivate it.

● Disc may be dirty, check and clean the disc. If the disc is damaged, replace another undamaged one.

DAB+/FM reception

● Ensure the antenna wire is fully extended.

● Electrical interference in your home can cause poor reception. Move the unit away from them (especially those

with motors and transformers).

The unit switches o automatically during play

● Increase the volume level of your connected sound source (DVD player/TV etc.)

Sound interference coming from wireless devices in Speakers

● Move any wireless devices (mobile phone, bluetooth device etc.) away from the unit.

TROUBLE SHOOTING

-19-

TECHNICAL SPECIFICATIONS

DAB+ radio frequency range: 174.928-239.2 MHz

FM radio frequency range: 87.5-108 MHz

Bluetooth frequency range: 2.402-2.480 GHz

Bluetooth transmission power: 4 dBm

AC power input: 230V~ 50Hz 25W

Batteries operation: 6 x 1.5V “C” (UM-2), not supplied

Speaker output power: 2 x 6 W

Bluetooth: V5.0

Aux in: 3.5mm stereo jack

Headphone out: 3.5mm stereo jack

Remote control battery: CR2025 x 1pcs

Unit dimension (L x D x H): 390 x 228 x 138 mm

Working Temperature: 0-45°C

Total weight: 2.1 kg

● The specication presents only as a reference. The value of weight and size are approximation.

● Our product is improved ceaselessly and the specication and function may be changed without prior notice.

Guarantee

Lenco oers service and warranty in accordance to European law, which means that in case of repairs (both during and after

the warranty period) you should contact your local dealer.

Important note: It is not possible to send products that need repairs to Lenco directly.

Important note: If this unit is opened or accessed by a non ocial service center in any way, the warranty expires.

This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be

voided.

Disclaimer

Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specications and

pictures in this documentation may dier slightly from your particular situation. All items described in this guide for illustration

purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description

made in this manual.

Disposal of the Old Device

This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in

Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any appli-

cable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural

resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical

and Electronic Equipment Directive).

CE Marking

Hereby, Lenco Benelux B.V., Thermiekstraat 1a, 6361 HB Nuth, The Netherlands, declares that this product is in compliance

with the essential EU directive requirements.

The declaration of conformity may be consulted via [email protected]

Service

For more information and helpdesk support, please visit www.lenco.com

Lenco Benelux BV, Thermiekstraat 1a, 6361 HB, The Netherlands.

TECHNICAL OVERVIEW

-20-

NEDERLANDS

LET OP:

Het gebruik van afstandsbedieningen of aanpassingen of de uitvoering van procedures die niet in dit docu-

ment zijn gespeciceerd, kan leiden tot gevaarlijke blootstelling aan straling.

VOORZORGSMAATREGELEN VOOR GEBRUIK

ONTHOUD DE VOLGENDE INSTRUCTIES:

1. Bedek of blokkeer de ventilatieopeningen niet. Wanneer u het apparaat op een schap plaatst, dient u 5 cm

(2”) vrije ruimte rondom het gehele apparaat te behouden.

2. Installeer het product volgens de meegeleverde gebruikershandleiding.

3. Houd het apparaat uit de buurt van hittebronnen, zoals radiatoren, verwarmingen, kachels, kaarsen

en andere hittegenererende producten of open vuur. Het apparaat kan alleen worden gebruikt in

een gematigd klimaat. Extreem koude of warme omgevingen dienen te worden vermeden. Het

bedrijfstemperatuurbereik ligt tussen 0 °C en 35 °C.

4. Gebruik dit apparaat niet in de buurt van krachtige magnetische velden.

5. Elektrostatische ontlading kan normaal gebruik van dit apparaat verstoren. U hoeft het apparaat in dit

geval slechts te resetten en opnieuw op te starten volgens de gebruikershandleiding. Wees voorzichtig

tijdens bestandsoverdracht en gebruik het product in een omgeving zonder statische interferentie.

6. Waarschuwing! Steek nooit een voorwerp via de ventilatie- of andere openingen in het product. Er is

hoogspanning in het product aanwezig en als u er een object insteekt, kan dat een elektrische schok

veroorzaken en/of kortsluiting in de interne onderdelen. Mors om dezelfde reden geen water of vloeistof

op het product.

7. Gebruik het toestel niet in vochtige ruimtes, zoals badkamers, stomende keukens of in de buurt van

zwembaden.

8. Het apparaat mag niet worden blootgesteld aan druppels en spetters en zorg ervoor dat er geen met

vloeistof gevulde voorwerpen, zoals vazen, op of in de buurt van het apparaat worden geplaatst.

9. Gebruik dit apparaat niet wanneer condensatie kan optreden. Wanneer het apparaat in een warme, natte

ruimte wordt gebruikt, kunnen zich waterdruppels of condens vormen in het apparaat en kan het apparaat

niet goed functioneren. Laat het apparaat 1 of 2 uur uit staan voordat u het inschakelt: het apparaat dient

droog te zijn voordat deze stroom ontvangt.

10. Alhoewel dit apparaat met grote zorg gefabriceerd en verschillende keren geïnspecteerd is voordat

het de fabriek verlaat, is het nog steeds mogelijk dat er problemen optreden, zoals met alle elektrische

apparaten. Als u rook, een overmatige hitteontwikkeling of enig ander onverwacht verschijnsel opmerkt,

moet u onmiddellijk de stekker van het netsnoer uit het stopcontact halen.

11. Dit apparaat moet worden gebruikt met een voedingsbron zoals gespeciceerd op het specicatielabel.

Als u twijfelt over het type voeding dat gebruikt wordt in uw huis, raadpleeg dan uw dealer of plaatselijk

energiebedrijf.

12. Buiten bereik van dieren houden. Sommige dieren kauwen graag op voedingskabels.

13. Gebruik een zacht, droog doekje om het apparaat te reinigen. Gebruik geen oplosmiddelen of op benzine

gebaseerde vloeistoen. U kunt een vochtig doekje met verdund schoonmaakmiddel gebruiken om

hardnekkige vlekken te verwijderen.

14. De leverancier is niet verantwoordelijk voor schade of verloren gegevens veroorzaakt door storing,

misbruik, modicatie van het apparaat of batterijvervanging.

15. Onderbreek nooit de verbinding wanneer het apparaat formatteert of bestanden overdraagt. De gegevens

kunnen anders corrupt of verloren raken.

16. Indien het apparaat een USB-afspeelfunctie heeft, moet de USB-geheugenstick rechtstreeks op het

apparaat worden aangesloten. Gebruik geen USB-verlengkabel, omdat die kan leiden tot storingen met

foutieve gegevens als gevolg.

17. Het classicatielabel bevindt zich op de onderkant of het achterpaneel van het apparaat.

18. Dit hulpmiddel is niet bedoeld voor gebruik door mensen (inclusief kinderen) met een fysieke, zintuiglijke

of mentale handicap, of een gebrek aan ervaring en kennis, tenzij zij toezicht of instructies hebben

gekregen over het juiste gebruik van het hulpmiddel door een persoon die verantwoordelijk is voor hun

veiligheid.

19. Dit product is alleen voor niet-professioneel gebruik bedoeld en niet voor commercieel of industrieel

gebruik.

20. Verzeker u ervan dat het apparaat in een stabiele positie staat opgesteld. Schade die wordt veroorzaakt

door het gebruik van dit product in een onstabiele positie, trillingen of schokken of het niet opvolgen van

La page est en cours de chargement...

Lenco SCD-720SI Le manuel du propriétaire

Ce manuel convient également à

Lenco SCD-720SI Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents