Sony kdf e42a11e Le manuel du propriétaire

KDF-E50A11E

KDF-E42A11E

LCD Projection TV

2-657-538-11(1)

LCD Projection TV KDF-E50A11E KDF-E42A11E

Printed in Spain

2-657-538-11(1)

GB

DE

FR

ES

KDF-E50A11E

KDF-E42A11E

Operating Instructions

Before operating the TV, please read the “Safety

information” section of this manual.

Retain this manual for future reference.

Bedienungsanleitung

Lesen Sie vor der Inbetriebnahme des Fernsehgeräts bitte

den Abschnitt „Sicherheitsinformationen“ in dieser

Anleitung. Bewahren Sie die Anleitung zum späteren

Nachschlagen auf.

Mode d’emploi

Avant d’utiliser le téléviseur, lisez attentivement la section

« Consignes de sécurité » de ce manuel.

Conservez ce manuel pour toute référence ultérieure.

Manual de instrucciones

Antes de utilizar el televisor, lea la sección “Información de

seguridad” de este manual.

Conserve este manual para consultarlo en el futuro.

For useful information about Sony products

Fur hilfreiche Informationen zu Sony Produkten

Pour obtenir les informations utiles concernant les produits Sony

Información de utilidad para productos Sony

2

GB

• To prevent the risk of electric shock, do not insert the plug

cut off from the mains lead into a socket outlet. This plug

cannot be used and should be destroyed.

• To prevent the risk of fire or electric shock, do not expose

the TV set to rain or moisture.

• Dangerously high voltages are present inside the TV set.

Do not open the cabinet. Refer servicing to qualified

personnel only.

• Certaines fonctions liées à la TV numérique ne sont

disponibles que dans les pays à diffusion DVB. Les

fonctions avec ne sont pas disponibles sauf pour les

pays à diffusion DVB.

• Pays à diffusion DVB : Royaume Uni, France, Italie,

Allemagne, Espagne, Finlande et Suède (septembre 2005)

Thank you for choosing this Sony product.

Before operating the TV, please read this manual

thoroughly and retain it for future reference.

Trademark information

• is a registered trademark of the DVB project.

• “PlayStation” is a trademark of Sony Computer

Entertainment, Inc.

• Licensed by BBE Sound, Inc. under USP4638258,

4482866. “BBE” and BBE symbol are trademarks of BBE

Sound, Inc.

• Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

• This TV incorporates

High-Definition Multimedia

Interface (HDMI™) technology. HDMI, the HDMI logo

and High-Definition Multimedia Interface are trademarks

or registered trademarks of HDMI Licensing LLC.

WARNING

NOTICE

Introduction

3

GB

Table of Contents

Safety information ....................................... 4

Precautions................................................. 7

Overview of the remote............................... 8

Overview of the TV buttons and

indicators................................................9

1: Checking the accessories .....................10

2: Inserting batteries into the remote.........10

3: Connecting an aerial/VCR..................... 11

4: Preventing the TV from toppling over....12

5: Switching on the TV.............................. 12

6: Selecting the language and

country/region........................................ 12

7: Auto-tuning the TV................................ 13

Watching TV.............................................. 14

Checking the Digital Electronic Programme

Guide (EPG) ............................... 16

Using the Favourite list ....................18

Viewing pictures from connected

equipment ............................................19

Navigating through menus........................ 19

Overview of the menus.................................... 20

Picture Adjustment menu..........................21

Picture Mode ................................................... 21

Contrast/Brightness/Colour/Hue/Sharpness/

Colour Tone..................................................... 22

Reset............................................................... 22

Noise Reduction.............................................. 22

Iris.................................................................... 22

Sound Adjustment menu................................. 23

Sound Effect ................................................... 23

Treble/Bass/Balance ....................................... 23

Reset............................................................... 23

Dual Sound...................................................... 24

Auto Volume.................................................... 24

Screen menu............................................. 25

Auto Format..................................................... 25

Screen Format..................................................25

RGB Center......................................................25

Features menu ..........................................26

AV2 Output.......................................................26

TV Speakers.....................................................26

PC Adjustment .................................................27

Timer menu ...............................................28

Sleep Timer......................................................28

Clock Set..........................................................28

Timer................................................................28

Set Up menu..............................................29

Auto Start Up....................................................29

Language .........................................................29

Country.............................................................29

Auto Tuning (Analogue mode only)..................30

Programme Sorting (Analogue mode only)......30

Programme Labels (Analogue mode only).......31

AV Preset.........................................................31

Manual Programme Preset

(Analogue mode only)................................31

Digital Set Up .........................................34

Connecting optional equipment.................37

Optimum Viewing area ..............................40

Replacing the lamp....................................41

Specifications ............................................44

Troubleshooting.........................................46

Index..........................................................48

Getting Started

Watching TV

: for digital channels

only

Using the Menu

Using Optional Equipment

Additional Information

4

GB

Safety information

Mains lead

• Unplug the mains lead

when moving the TV

set. Do not move the

TV set with the mains

lead plugged in. It may

damage the mains lead

and result in fire or electric shock.

• If you damage the mains lead, it may

result in fire or electric shock.

– Do not pinch, bend, or twist the

mains lead excessively. The core

conductors may be exposed or

broken, causing a short-circuit,

which may cause fire or electric

shock.

– Do not modify or damage the mains

lead.

– Do not put anything heavy on the

mains lead. Do not pull the mains

lead.

– Keep the mains lead away from heat sources.

– Be sure to grasp the plug when disconnecting the mains

lead.

• If the mains lead is damaged, stop using it and ask your

dealer or Sony service centre to exchange it.

• Use only an original Sony mains lead, not other brands.

Mains lead/cable protection

Pull out the mains lead/cable by

the plug. Do not pull on the mains

lead/cable itself.

Mains

Do not use a poor fitting mains socket. Insert the

plug fully into the mains socket. A poor fit may

cause arcing and result in fire. Contact your

electrician to have the mains socket changed.

Optional accessories

Observe the following when installing the

TV set using a stand. If you do not do so, the

TV set may fall and cause serious injury.

• Use the specified stand.

• Secure the TV set properly, following the instructions

supplied with your stand when installing the TV set.

• Be sure to attach the brackets supplied with your stand.

Medical institutions

Do not place this TV set in a place

where medical equipment is in

use. It may cause malfunction of

medical instruments.

Carrying

• Before carrying the TV set, disconnect

all the cables from the TV set.

• When you carry the TV set by hand,

hold the TV set as illustrated on the

right. If you do not do so, the TV set

may fall and be damaged or cause

serious injury. If the TV set has been

dropped or damaged, have it checked immediately by

qualified service personnel.

• When transporting it, do not subject the TV set to jolts or

excessive vibration. The TV set may fall and be damaged

or cause serious injury.

• When you carry the TV set in for repair or when you move

it, pack it using the original carton and packing material.

• Carrying the TV set requires two people.

Ventilation

• Never cover the ventilation holes in the rear side. It may

cause overheating and result in fire.

• Unless proper ventilation is provided, the TV set may

gather dust and get dirty. For proper ventilation, observe

the following:

– Do not install the TV set turned backwards or sideways.

– Do not install the TV set turned over or upside down.

– Do not install the TV set on a shelf or in a closet.

– Do not place the TV set on a rug or bed.

– Do not cover the TV set with cloth, such as curtains, or

items such as newspapers, etc.

• Leave some space around the TV set. Otherwise, air-

circulation may be inadequate and cause overheating,

which may cause fire or damage to the TV set.

PUSH OPEN

WEGA GATE

TV/VIDEO

CANNELVOL U M E

POWER

TIMER LAM P

POWER/STANDBY

30 cm

Leave

at least

this

much

space.

10 cm 10 cm

5

GB

• When installing the TV set on the wall, leave at least 10

cm space from the bottom of the TV set.

• Never install the TV set as follows:

Ventilation holes

Do not insert anything in the ventilation

holes. If metal or liquid is inserted in these

holes, it may result in fire or electric shock.

Placement

• Never place the TV set in hot, humid

or excessively dusty places.

• Do not install the TV set where

insects may enter.

• Do not install the TV set where it

may be exposed to mechanical vibration.

• Place the TV set on a stable, level surface.

Otherwise, the TV set may fall and cause

injury.

• Do not install the TV set in a location

where it may protrude, such as on a

behind a pillar or where you might bump

your head on it. Otherwise, it may result

in injury.

Water and moisture

• Do not use this TV set near water

– for example, near a bathtub or

shower room. Also do not expose

to rain, moisture or smoke. This

may result in fire or electric shock.

• Do not touch the mains lead and the TV

set with set hands. Doing so may cause

electric shock or damage to the TV set.

Moisture and flammable objects

• Do not let this TV set get wet. Never

spill liquid of any kind on the TV set.

If any liquid or solid object does fall

through openings in the cabinet, do

not operate the TV set. It may result in

electric shock or damage to the TV set.

Have it checked immediately by

qualified service personnel.

• To prevent fire, keep flammable objects (candles, etc.) and

electric bulbs away from the TV set.

Oils

Do not install this TV set in restaurants that use oil. Dust

absorbing oil may enter and damage the TV set.

Fall

Place the TV set on a secure, stable stand. Do

not hang anything on the TV set. If you do,

the TV set may fall from the stand, causing

damage or serious injury.

Do not allow children to climb on the TV set.

Vehicle or ceiling

Do not install this TV set in a

vehicle. The motion of the vehicle

may cause the TV set to fall down

and cause injury. Do not hang this

TV set from the ceiling.

Ships and other vessels

Do not install this TV set on a ship

or other vessel. If the TV set is

exposed to seawater, it may cause

fire or damage the TV set.

Outdoor use

• Do not expose the TV set to

direct sunlight. The TV set may

heat up and this may result in

damage to the TV set.

• Do not install this TV set

outdoors.

Wiring

• Unplug the mains lead when wiring cables. When hooking

up, be sure to unplug the mains lead for your safety.

• Take care not to catch your feet on the cables. It may

damage the TV set.

Cleaning

• Unplug the mains lead when cleaning the

mains plug and this TV set. If you do not,

it may result in electric shock.

• Clean the mains plug regularly. If the

plug is covered with dust and it picks up

moisture, its insulation may deteriorate

and result in fire.

Lightning storms

For your own safety, do not touch any

part of the TV set, mains lead, or

aerial lead during lightning storms.

Air circulation is blocked.

Wall

Continued

6

GB

Damage requiring service

If the surface of the TV set cracks, do not touch it until you

have unplugged the mains lead. Otherwise electric shock

may result.

Servicing

Do not open the cabinet. Entrust the

TV set to qualified service personnel

only.

Small accessories removal and

fittable

Keep accessories out of children’s reach. If they are

swallowed, choking or suffocation may occur. Call a doctor

immediately.

When not in use

For environmental and safety

reasons, it is recommended that

the TV set is not left if standby

when unused. Disconnect from

the mains. However, some TV

sets may have features which need the TV set to be left in

standby to work correctly. The instructions in this manual

will inform you if this applies.

Viewing the TV

• To view the TV comfortably, the recommended viewing

position is from four to seven times the screen’s vertical

length away from the TV set.

• View the TV in moderate light, as viewing the TV in poor

light strains your eyes. Watching the screen continuously

for long periods of time can also strain your eyes.

• If the angle of the TV set is to be adjusted, steady the base

of the stand with your hand to prevent the TV set from

becoming separated from the stand. Be careful not to get

your fingers caught between the TV set and the stand.

Volume adjustment

• Adjust the volume so as not to trouble your neighbours.

Sound carries very easily at night time. Therefore, closing

the windows or using headphones is suggested.

• When using headphones, adjust the volume so as to avoid

excessive levels, as hearing damage may result.

Overloading

This TV set is designed to operate on

a 220–240 V AC supply only. Take

care not to connect too many

appliances to the same mains socket

as this could result in fire or electric

shock.

Heat

Do not touch the surface of the TV set. It remains hot, even

after the TV set has been turned off for some time.

Corrosion

If you use this TV set near the seashore, salt may corrode

metal parts of the TV set and cause internal damage or fire.

It may also shorten the life of the TV set. Steps should be

taken to reduce the humidity and moderate the temperature

of the area where the TV set is located.

7

GB

Precautions

LCD Panel

• Although the LCD panel is made with high-precision

technology and 99.99% or more of the pixels are effective,

black dots may appear or bright points of light (red, blue,

or green) may appear constantly on the LCD panel. This is

a structural property of the LCD panel and is not a

malfunction.

• Do not expose the LCD panel surface to the sun. Doing so

may damage the screen surface.

• Do not push or scratch the front filter, or place objects on

top of this TV set. The image may be uneven or the LCD

panel may be damaged.

• If this TV set is used in a cold place, a smear may occur in

the picture or the picture may become dark.

This does not indicate a failure. These phenomena

disappear as the temperature rises.

• Ghosting may occur when still pictures are displayed

continuously. It may disappear after a few moments.

• The screen and cabinet get warm when this TV set is in

use. This is not a malfunction.

• The LCD contains a small amount of liquid crystal and

mercury. The fluorescent tube used in this TV set also

contains mercury. Follow your local ordinances and

regulations for disposal.

Installing the TV set

• Do not install the TV set in places subject to extreme

temperature, for example in direct sunlight, or near a

radiator, or heating vent. If the TV set is exposed to

extreme temperature, the TV set may overheat and cause

deformation of the casing or cause the TV set to

malfunction.

• The TV set is not disconnected from the mains when the

TV set is switched off. To disconnect the TV set

completely, pull the plug from the mains.

• To obtain a clear picture, do not expose the screen to direct

illumination or direct sunlight. If possible, use spot

lighting directed down from the ceiling.

• Do not install optional components too close to the TV set.

Keep optional components at least 30 cm away from the

TV set. If a VCR is installed in front of the TV set or

beside the TV set, the picture may become distorted.

• Picture distortion and/or noisy sound may occur if the TV

set is positioned in close proximity to any equipment

emitting electromagnetic radiation.

Handling and cleaning the screen surface/

cabinet of the TV set

The screen surface is finished with a special coating to

prevent strong light reflections.

To avoid material degradation or screen coating degradation,

observe the following precautions.

• Do not push on the screen, scratch it with a hard object, or

throw anything at it. The screen may be damaged.

• Do not touch the display panel after operating the TV set

continuously for a long period as the display panel

becomes hot.

• We recommend that the screen surface be touched as little

as possible.

• To remove dust from the screen surface/cabinet, wipe

gently with a soft cloth. If dust is persistent, wipe with a

soft cloth slightly moistened with a diluted mild detergent

solution. You can wash and repeatedly use the soft cloth.

• Never use any type of abrasive pad, alkaline/acid cleaner,

scouring powder, or volatile solvent, such as alcohol,

benzene, thinner or insecticide. Using such materials or

maintaining prolonged contact with rubber or vinyl

materials may result in damage to the screen surface and

cabinet material.

• The ventilation holes can accumulate dust over time. To

ensure proper ventilation, we recommend removing the

dust periodically (once a month) using a vacuum cleaner.

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the product or on

its packaging indicates that this

product shall not be treated as

household waste. Instead it shall

be handed over to the applicable

collection point for the recycling

of electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent

potential negative consequences for the environment and

human health, which could otherwise be caused by

inappropriate waste handling of this product. The recycling

of materials will help to conserve natural resources. For more

detailed information about recycling of this product, please

contact your local Civic Office, your household waste

disposal service or the shop where you purchased the

product.

Disposal of the TV set

8

GB

Overview of the remote

1 TV "/1 – TV standby

Switches off the TV temporarily. The 1 (standby) indicator on the front of the

TV lights up. Press again to switch on the TV from the standby mode.

2 % – Mute (page 14)

3 / – Input select / Text hold

• In TV mode (page 19): Selects the input source from equipment connected to

the TV sockets.

• In Text mode (page 15): Holds the current page.

4 ANALOG – Analogue mode

5 DIGITAL – digital mode

Switches to digital mode. In digital mode, removes any interactive prompts from

the screen.

6 – Screen mode (page 15)

7 This button is not supported on this set.

8 – Picture mode (page 21)

9 9 – Sound effect (page 23)

q; Number buttons

• In TV mode: Selects channels. For channel numbers 10 and above, enter the

second digit within two seconds.

• In Text mode: Enters the three digit page number to select the page.

qa Previous channel

Returns to the previous channel watched (for more than five seconds).

qs / – Info / Text reveal

• In digital mode: Displays brief details of the programme currently being

watched.

• In analogue mode: Displays information such as current channel number and

screen mode.

• In Text mode (page 15): Reveals hidden information (e.g., answers to a quiz).

qd Coloured buttons

• In digital mode (page 16, 18): Selects the options at the bottom of the screen in the Favourite and EPG digital menus.

• In Text mode (page 15): Used for Fastext.

qf / – Text (page 15)

qg – EPG (Digital Electronic Programme Guide) (page 16)

qh M/m/</,/OK (page 19)

qj Picture Freeze (page 15)

Freezes the TV picture.

qk – Favourite (page 18)

ql This button is not supported on this set.

w; Sleep Timer (page 28)

Sets the TV to stadby mode after a specified time period.

wa MENU (page 19)

ws PROG +/- (page 14)

• In TV mode: Selects the next (+) or previous (-) channel.

• In Text mode: Selects the next (+) or previous (-) page.

wd 2 +/- – Volume

Tips

•The m/M/</,, PROG+, and number 5 buttons have tactile dots. Use the tactile dots as references when operating the TV.

• functions are available only for countries (page 2).

qf

qg

qh

ql

w;

wa

ws

qj

qk

1

2

3

4

5

6

7

8

9

0

qa

qs

qd

wd

9

GB

Overview of the TV buttons and indicators

1 (page 19)

2 / – Input select (page 15)

• In TV mode: Selects the input source from equipment connected to the TV sockets.

• In TV menu: OK

3 2 +/-/ </,

• Increases (+) or decreases (-) the volume.

• In TV menu: Moves through the options left (

<) or right (,).

4 PROG +/-/ M/m

• In TV mode: Selects the next (+) or previous (-) channel.

• In TV menu: Moves through the options up (

M) or down (m).

5 –Sleep Timer (page 28)

• Lights up in amber when the “Sleep Timer” is set or when a digital event is programmed.

• Lights up in amber when digital REC starts.

6 Lamp Indicator.

Lights up in red when the lamp for the light source has burned out (page 39)

7 ` – Power indicator / 1 – Standby indicator

• Lights up in green when the TV is switched on.

• Lights up in red when the TV is in standby mode.

8 Remote control sensor

9 1 – Power

Switches the TV on or off.

PUSH OPEN

WEGA GATE

TV/VIDEO

CANNELVO L U M E

POWER

TIMER LAMP

POWER/STANDBY

MENU

21593 4678

OK

10

GB

1: Checking the

accessories

Remote RM-ED002 (1)

Size AA batteries (R6 type) (2)

Coaxial cable (1)

2: Inserting batteries

into the remote

Notes

• Observe the correct polarity when inserting batteries.

• Dispose of batteries in an environmentally friendly way.

Certain regions may regulate disposal of the battery.

Please consult your local authority.

• Do not use different types of batteries together or mix old

and new batteries.

• Handle the remote with care. Do not drop or step on it, or

spill liquid of any kind onto it.

• Do not place the remote in a location near a heat source, or

in a place subject to direct sunlight, or in a damp room.

Getting Started

11

GB

Getting Started

3: Connecting an aerial/VCR

A

1

Rear of the TV

Coaxial cable

(not supplied)

Coaxial cable

(supplied)

IN

OUT

R/D/D/D

(VARIABLE)

L/G/S/I

Y

P

R

/C

R

P

B

/C

B

L/G/

S/I

R/D/

D/D

(SmartLink)

/

6

R L

MODEM

5V 500 mA

Coaxial cable

(not supplied)

Scart lead

(not supplied)

RF lead

(not

supplied)

2-1

1

Rear of the TV

2-3

VCR

2-2

Coaxial cable

(supplied)

B

12

GB

1 Connect your aerial to the socket on the

rear of the TV.

If connecting to an aerial only (A)

Connect the socket to the socket on the rear of

the TV with the supplied coaxial cable.

Go to step 3.

If connecting to a VCR with an aerial (B)

Go to step 2.

2 Connect your VCR.

1 Connect the socket on the rear of the TV to the

input socket on your VCR with the RF lead.

2 Connect the output socket on your VCR to the

socket on the rear of the TV with the supplied

coaxial cable.

3 Connect the scart socket on your VCR to the /

2 scart socket on the rear of the TV with a

scart lead.

Note

Do not connect the mains lead to your mains socket until

all connections are complete.

3 Bundle the cable.

4: Preventing the TV

from toppling over

Sony strongly recommends using the TV stand SU-

RG11S (for KDF-E42A11E)/SU-RG11M (for KDF-

E50A11E) with a support belt designed for your TV.

5: Switching on the TV

1 Connect the TV to your mains socket (220-

240V AC, 50Hz).

2 Press 1 on the TV (front side).

When you switch on the TV for the first time, the

Language menu appears on the screen, then go to “6:

Selecting the language and country/region” on

page 12.

When the TV is in standby mode (the

1

(standby)

indicator on the front of the TV is red), press TV

+

/

1

on the remote to switch on the TV, then go to page 13.

6:

Selecting the language

and country/region

When you switch on the TV for the first time, the

Language menu appears on the screen.

1

Press

m

/

M

/

</,

to

select the language

displayed on the

menu screens, then

press OK.

2

Press

m

/

M

to

select the country/

region in which you

will operate the TV,

then press OK. If

the country/region

in which you want

to use the TV does

not appear in the

list, select “-”

instead of a

country/region.

The message

confirming the TV

start auto-tuning

appears on the

screen.

1,2

PUSH OPEN

WEGA GATE

TV/VIDEO

CANNELVOL U M E

POWER

TIMER LA MP

POWER/STANDBY

2

1

Country

Select Country

–

United Kingdom

Ireland

Nederland

België/Belgique

Luxembourg

France

Italia

Schweiz/Suisse/Svizzera

Deutschland

Österreich

Language

Select Language

English

Nederlands

Français

Italiano

Deutsch

Türkçe

Ελληνικά

Español

Português

Polski

Česky

Magyar

Русский

Бьлгарски

Suomi

Dansk

Svenska

Norsk

13

GB

Getting Started

7: Auto-tuning the TV

After selecting the language and country/region, a

message confirming the TV start auto-tuning appears

on the screen.

You must tune the TV to receive channels (TV

broadcasts). Do the following to search and store all

available channels.

1 Press OK to select “Yes”.

The TV starts searching for all available digital

channels followed by all available analogue

channels. This may take some time, please be

patient and do not press any buttons on the TV or

remote.

Once all available digital and analogue channels

have been stored, the TV returns to normal

operation, displaying the digital channel stored on

channel number 1. If no digital channels are

found, the analogue channel stored on channel 1 is

displayed.

When a message appears for you to confirm the

aerial connections

No digital or analogue channels are found. Check

all the aerial connections and press OK twice to

start auto-tuning again.

2 The Programme Sorting menu appears on

the screen.

Note

If some digital channel is found, this step will

not appear

3 To change the order in which the channels

are stored on the TV. See page 30.

4 Press MENU to exit.

The TV has now tuned in all the available

channels.

Tip

functions are available only for countries (page 2).

4

1

Do you want to start

automatic tuning ?

Ye s No

m

Number of Services found 14

Searching. 40%

Digital auto-tune display

m

Auto Tuning

Programmes found:

Searching...

Analogue auto-tune display

14

GB

Watching TV

1 Press 1 on the TV (Front side) to switch on

the TV.

When the TV is in standby mode (the 1 (standby)

indicator on the front of the TV is red), press TV

"/1 on the remote to switch on the TV.

2

Press DIGITAL to switch to digital mode

or ANALOG to switch to analogue mode.

The channels available vary depending on the

mode.

3 Press the number buttons or PROG

+/- to select a TV channel.

To select channel numbers 10 and above using the

number buttons, enter the second and third digits

within two seconds.

To select a digital channel using the Digital

Electronic Programme Guide (EPG), see page 16.

In digital mode

An information banner appears briefly. The

following icons may be indicated on the banner.

Additional operations

Watching TV

3

1

2

3

2

PUSH OPEN

WEGA GATE

TV/VIDEO

CANNELVOL U M E

POWER

TIMER LAMP

POWER/STANDBY

1

:Radio service

: Scrambled/Subscription service

: Multiple audio languages available

: Subtitles available

: Subtitles available for the hearing impaired

: Recommended minimum age for current

programme (from 4 to 18 years)

: Parental Lock

: Current programme is being recorded

To Do this

Turn off the TV

temporarily

(Standby mode)

Press TV "/1.

Turn on the TV

from Standby

mode without sound

Press %. Press 2 +/- to set the

volume level

Turn off the TV

completely

Press 1 on the front side of the

TV.

Adjust the volume Press 2 + (increase)

/- (decrease).

Mute the sound Press %. Press again to restore.

Switch to digital

mode

Press DIGITAL

Hide interactive

prompts from the

screen (in digital

mode only)

Switch to analogue

mode

Press ANALOG.

Tip

functions are available only for countries (page 2).

15

GB

Watching TV

To access Text

Press /. Each time you press /, the display changes

cyclically as follows:

Text t Text over the TV picture (mix mode) t No

Text (exit the Text service)

To select a page, press the number buttons or PROG

+/-.

To hold a page, press / .

To reveal hidden information, press / .

Return to normal TV mode, press ANALOG.

Tips

• Ensure that the TV is receiving a good signal, or some text

errors may occur.

• Most TV channels broadcast a Text service. For

information on the use of the service, select the index page

(usually page 100).

When four coloured items appear at the bottom of the Text

page, Fastext is available. Fastext allows you to access pages

quickly and easily. Press the corresponding coloured button

to access the page.

Picture Freeze

Freezes the TV picture (e.g. to make a note of a

telephone number or recipe).

1 Press on the remote control.

2 Press again to return to normal TV mode.

To change the screen mode manually to

suit the broadcast

Press repeatedly to select Wide, Smart, 4:3, 14:9,

or Zoom.

Displays wide screen (16:9) broadcasts in the correct

proportions.

Displays conventional 4:3 broadcasts with an

imitation wide screen effect. The 4:3 picture is

stretched to fill the screen.

Displays conventional 4:3 broadcasts (e.g., non-wide

screen TV) in the correct proportions.

As a result, black border areas are visible on the

screen.

Displays 14:9 broadcasts in the correct proportions.

As a result, black border areas are visible on the

screen.

Displays cinemascopic (letter box format) broadcasts

in the correct proportions.

* Parts of the top and bottom of the picture may be cut off.

Tips

• Alternatively, you can set “Auto Format” to “On”. If the

broadcaster sends format information the TV will

automatically select the best mode to suit the broadcast

(page 25).

• You can adjust the position of the picture when selecting

Smart, 14:9, or Zoom. Press m/M to move up or down

(e.g., to read subtitles).

Return to the

previous channel

watched (for more

than five seconds)

Access the

Programme index

table (in analogue

mode only)

To access the Input

signal index table

Press .

Press OK. To select a channel,

press m/M, then press OK.

Press OK. Press

, to select

the desired input signal, press

m/M, then press OK.

To Do this

Wide

Smart*

4:3

14:9*

Zoom*

16

GB

Checking the Digital Electronic Programme Guide

(EPG)

001

002

003

006

007

008

009

014

024

029

030

040

BBC ONE Wales

BBC 2W

ITV 1 Wales

ITV 2

BBC THREE

Channel 4

Teletext

E4

price-drop.tv

UKTV FOOD

CBBC Channel

BBC NEWS 24

Thu 27 May

All Categories

Select: Action list: +/- 1 day on/off

Thu 27 May 10:31

10:30 11:00

City Hospital Houses Be… Bargain Hu… Cash in the…

The… The… Sch… Sch… The Daily Politics

This M… i i This Morning i This Morning

Sally Jessy Rap… Judge Judy Judge J… Judge J…

This is BBC THREE This is BB…

Self… The Vi… Teen Big B… From Th… News at N…

No Event Information

E4 Preview

No Event Information

Food and D… Ready Stea… No Event Information

Mat… Mat… K… K… K… Look… Look… Zig Zag

BBC News BBC News BBC News

NextPrevious 30 min view Category

11:30 12:00

OK

1 In digital mode, press to display the

Digital Electronic Programme Guide

(EPG).

2 Perform the desired operation in following

table.

Digital Electronic Programme

Guide (EPG)

To Do this

Turn off the EPG Press .

Move through the EPG Press m/M/</,.

Display the previous or next six channels Press the red (previous) or green (next) button.

Watch a current programme Press OK while the current programme is selected.

Sort the programme information by

category – Category list

1 Press the blue button.

2 Press m/M/</, to select a category. The category name is

displayed on the side.

The categories available include:

Favourite

Contains all the channels that have been stored in the Favourite list

(page 18).

All categories

Contains all available channels.

News

Contains all news channels.

3 Press OK.

The Digital Electronic Programme Guide (EPG) now only displays the

current programmes from the category selected.

Set a programme to be recorded – Timer

REC

1 Press m/M/</, to select the future programme you want to

record.

2 Press OK.

3 Press m/M to select “Timer REC”.

4 Press OK to set the TV and your VCR timers.

A symbol appears by that programme’s information.

Notes

• You can set VCR timer recording on the TV only for Smartlink compatible

VCRs. If your VCR is not Smartlink compatible, a message will be displayed to

remind you to set your VCR timer.

• Once a recording has begun, you can switch the TV to standby mode, but do not

switch off the TV completely or the recording may be cancelled.

Tip

functions are available only for countries (page 2).

17

GB

Watching TV

Set a programme to be displayed

automatically on the screen when it starts

– Reminder

1 Press m/M/</, to select the future programme you want to

display.

2 Press OK.

3 Press m/M to select “Reminder”.

4 Press OK to automatically display the selected programme

when the programme starts.

A c symbol appears by that programme’s information.

Note

If you switch the TV to standby mode, it will automatically turn itself on

when the programme is about to start.

Set the time and date of a programme you

want to record – Manual Timer REC

1 Press OK.

2 Press m/M to select “Manual Timer REC”.

3 Press m/M to select the date, then press ,.

4 Set the start and stop time in the same way as in step 3.

5 Press m/M to select the channel, then press OK to set the TV

and your VCR timers.

A symbol appears by that programme’s information.

Notes

• You can set VCR timer recording on the TV only for Smartlink compatible

VCRs. If your VCR is not Smartlink compatible, a message will be displayed to

remind you to set your VCR timer.

• Once a recording has begun, you can switch the TV to standby mode, but do not

switch off the TV completely or the recording may be cancelled.

Cancel a recording/reminder – Timer list

1 Press OK.

2 Press m/M to select “Timer list”.

3 Press m/M to select the programme you want to cancel, then

press OK.

A display appears to confirm that you want to cancel the programme.

4 Press < to select “Yes”, then press OK to confirm.

To Do this

18

GB

Using the Favourite list

Tip

functions are available only for countries (page 2)

To Do this

Create your Favourite list for the first time A message appears asking if you want to add channels to the Favourite list

when you press for the first time.

1 Press OK to select “Yes”.

2 Press m/M to select the channel you want to add, then press

OK.

If there are more than five channels in the list, press the green button for

the next five channels or press the red button for the previous five

channels. If you know the channel number, you can use the number

buttons to directly select a channel.

3 Press OK.

Channels that are stored in the Favourite list are indicated by a

symbol.

Turn off the Favourite list Press .

Move through in the Favourite list Press m/M.

Display the previous or next five channels Press the red (previous) or green (next) button.

See brief details on current programmes Press while selecting a channel. Press again to cancel.

Watch a channel Press OK while selecting a channel.

Add or remove channels in the Favourite

list

1 Press the blue button.

Channels that are stored in the Favourite list are indicated by a

symbol.

2 Press m/M to select the channel you want to add or remove.

If there are more than five channels in the list, press the green button for

the next five channels or press the red button for the previous five

channels. If you know the channel number, you can use the number

buttons to directly select a channel.

3 Press OK.

4 Press the blue button to return to the Favourite list.

Remove all channels from the Favourite

list

1 Press the blue button.

2 Press the yellow button.

A display appears to confirm that you want to delete all channels from the

Favourite list.

3 Press < to select “Yes”, then press OK to confirm.

BBC NEWS 24

Fri 15 Apr 16:35

001 BBC ONE

002 BBC TWO

003 ITV 1

004 Channel 4

005 Channel 5

Evening News

Up Down Set up

Select: Set: Back:OK

1 In digital mode, press to display the

Favourite list.

A message appears asking if you want to add

channels to the Favourite list when the Favourite

list is blank.

2 Perform the desired operation in following

table.

Favourite list

19

GB

Using the Menu

Viewing pictures from

connected equipment

Switch on the connected equipment, then

perform one of the following operation.

For equipment connected to the scart sockets using a

fully-wired 21-pin scart lead

Start playback on the connected equipment.

The picture from the connected equipment appears on

the screen.

For an auto-tuned VCR page 11

Press PROG +/-, or the number buttons, to select the

video channel. You can also press / repeatedly

until the correct input symbol (see below) appears on

the screen.

For other connected equipment

Press / repeatedly until the correct input

symbol (see below) appears on the screen or press OK

to access the Input signal index table. Press , to select

an input source, press m/M, then press OK.

Additional operations

Navigating through

menus

1 Press MENU to display the menu.

2 Press M/m to select a menu icon, press ,.

3 Press M/m/</, to select an option.

4 Press M/m/</, to change/set the

setting, then press OK.

To exit the menu, press MENU.

To return to the last display, press <.

1/ 1, 2/ 2:

Audio/video or RGB input signal through the scart

socket / 1 or 2. appears only if an RGB

source has been connected.

3:

Component input signal through the Y, P

B/CB, PR/CR

sockets / 3, and audio input signal through the

L/G/S/I, R/D/D/D sockets / 3.

4/ 4:

Video input signal through the video socket 4, and

audio input signal through the audio socket L/G/S/I

(MONO), R/D/D/D sockets 4. appears only if

the equipment is connected to the S video socket 4

instead of the video socket 4, and S video input

signal is input through the S video socket 4.

5:

RGB input signal through the PC connectors 5, and

audio input signal through the socket 5.

6:

Digital audio/video signal is input through the HDMI IN

6 socket. Audio input signal is analogue only if the

equipment has been connected using the DVI and audio

out socket.

To Do this

Return to the normal

TV operation

Press DIGITAL or ANALOG.

Access the Input

signal index table

Press OK. Press

, to select an

input source, press m/M, then press

OK.

Using the Menu

1

4

2,3,4

Continued

20

GB

Overview of the menus

The following options are available in each menu. For

details on navigating through menus, see (page 19).

Also, see page in parentheses for details of each menu.

1 Picture Adjustment

Picture Mode (21)

Contrast/Brightness/Colour/Hue/

Sharpness (21)

Colour Tone (21)

Reset (22)

Noise Reduction (22)

Iris (22)

2 Sound Adjustment

Sound Effect (23)

Treble/Bass/Balance (23)

Reset (23)

Dual Sound (24)

Auto Volume (24)

3 Screen

Auto Format (25)

Screen Format (25)

RGB Center (25)

4 Features

AV2 Output (26)

TV Speakers (26)

PC Adjustment (27)

Select: Set: End:

OK

MENU

Picture Mode

Contrast

Brightness

Colour

Hue

Sharpness

Colou r Tone

Reset

Noise Reduction

Iris

Custom

Max

50

0

15

Warm

Auto

High

Picture Adjustment

1

2

3

4

5

6

5 Timer

Sleep Timer (28)

Clock Set (28)

Timer (28)

6 Set Up

Auto Start Up (29)

Language (29)

Country (29)

Auto Tuning (30)

Programme Sorting (30)

Programme Labels (31)

AV Preset (31)

– Label/Skip

Manual Programme Preset (31)

– Programme/System/Channel/Label/AFT/

Audio Filter/Skip/Decoder/ATT/Confirm

Digital Set Up (34)

– Digital Tuning/Digital Set-up

La page charge ...

Sony kdf e42a11e Le manuel du propriétaire

Ce manuel convient également à

Sony kdf e42a11e Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents