Sony FX Series User ILME FX3 Mode d'emploi

Taper
Mode d'emploi

Ce manuel convient également à

©2021 Sony Corporation Printed in Thailand
\\Win-473\camera\CX95900(ALCIN)_SG\Multi\04_Compose\5025887411_14lang\5025887411ILMEFX3CEC\00COV-ILMEFX3CEC\000COV.indd
2020/11/05 09:26
ILME-FX3
5-025-887-41(1)
\\Win-473\camera\CX95900(ALCIN)_SG\Multi\04_Compose\5025887411_14lang\5025887411ILMEFX3CEC\00COV-ILMEFX3CEC\000COV.indd
2020/11/05 09:26
ILME-FX3
5-025-887-41(1)
ILME-FX3
5-025-887-41(1)
E-mount
Interchangeable Lens Digital Camera/Startup Guide GB
Fotocamera digitale con obiettivo intercambiabile/Guida di avvio IT
Digitalkamera med utbytbart objektiv/Startguide SE
Digitalkamera mit Wechselobjektiv/Einführungsanleitung DE
Цифровой фотоаппарат со сменным объективом/Руководство по началу работы
RU
Digitale camera met verwisselbare lens/Beknopte gids NL
Digitalkamera med utskiftbart objektiv/Startveiledning NO
Appareil photo à objectif interchangeable/Guide de démarrage FR
Câmara Digital de Objetivas intercambiáveis/Guia de início PT
Digitaalinen kamera vaihdettavalla objektiivilla/Aloitusopas FI
Cámara Digital de Lentes Intercambiables/Guía de inicio ES
Цифрова камера зі змінним об’єктивом/Посібник із початку роботи
UA
Aparat cyfrowy z wymiennymi obiektywami/Przewodnik uruchamiania
PL
Digitalkamera med udskifteligt objektiv/Startvejledning DK
https://rd1.sony.net/help/ilc/2035/h_zz/
“Help Guide” (Web manual)
Refer to “Help Guide for in-depth
instructions on the many
functions of the camera.
ILME-FX3
5-025-887-41(1)
GB
2
C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd
DTP data saved: 2020/11/06 20:15
PDF file created: 2020/11/06 20:16
English
About the manual for this camera
This guide describes the necessary preparations to start using the
product, basic operations, etc. For details, refer to the “Help Guide” (web
manual).
https://rd1.sony.net/help/ilc/2035/h_zz/
“Help Guide” (Web manual)
ILME-FX3 Help Guide
ILME-FX3
5-025-887-41(1)
GB
3
C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd
DTP data saved: 2020/11/06 20:15
PDF file created: 2020/11/06 20:16
GB
Preparations
Checking the supplied items
The number in parentheses indicates the number of pieces.
Camera (1)
Battery charger (1)
Power cord (mains lead) (1)*
(supplied in some countries/
regions)
* Multiple power cords may be
supplied with this equipment. Use
the appropriate one that matches
your country/region. See “Notes
on use.”
Rechargeable battery pack
NP-FZ100 (1)
USB Type-C® cable (1)
XLR handle unit (1)
Accessory shoe kit (1)
Body cap (1) (attached to the
camera)
Shoe cap (1) (attached to the
camera)
Handle shoe cap (1) (attached to
the handle)
Startup Guide (this manual) (1)
Reference Guide (1)
Identifying parts
For details on identifying parts, refer to the following Help Guide URL:
https://rd1.sony.net/help/ilc/2035_parts/h_zz/
ILME-FX3
5-025-887-41(1)
GB
4
C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd
DTP data saved: 2020/11/06 20:15
PDF file created: 2020/11/06 20:16
Preparing the battery pack
1 Insert the battery pack into the
battery charger, and connect it to a
wall outlet (wall socket) using the
power cord (supplied).
Place the battery pack on the
battery charger in the direction
of . Slide the battery pack in the
direction of the arrow as far as it
will go.
When charging starts, the CHARGE
lamp on the battery charger will
light up. When charging is finished,
the CHARGE lamp and all indicators
turn off.
CHARGE lamp
To a wall outlet
(wall socket)
2 Insert the battery pack into the
camera.
Open the battery cover, and then
insert the battery pack while
pressing the lock lever.
Lock lever
ILME-FX3
5-025-887-41(1)
GB
5
C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd
DTP data saved: 2020/11/06 20:15
PDF file created: 2020/11/06 20:16
GB
Inserting a memory card into the camera
You can use CFexpress Type A memory cards and SD memory cards with this
camera.
Slot 1 Slot 2
Open the memory card cover and insert the memory card into Slot
1.
Both Slot 1 and Slot 2 support CFexpress Type A memory cards and SD
memory cards.
Insert a CFexpress Type A memory card with the label facing the
monitor, and an SD memory card with the terminal facing the monitor.
Insert the card until it clicks into place.
You can change which memory card slot to use by selecting
MENU
(Shooting) [Media] [ Rec. Media Settings]
[Prioritize Rec. Media]. The Slot 1 is used in the default settings.
Hint
• When you use a memory card with the camera for the first time, it is recommended
that you format the card on the camera for more stable performance of the memory
card.
ILME-FX3
5-025-887-41(1)
GB
6
C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd
DTP data saved: 2020/11/06 20:15
PDF file created: 2020/11/06 20:16
Attaching a lens
Mounting indexes
1 Remove the body cap from the camera and the rear lens cap from the
rear of the lens.
2 Mount the lens by aligning the two white index marks (mounting
indexes) on the lens and camera.
3 While pushing the lens lightly toward the camera, turn the lens slowly
in the direction of the arrow until it clicks into the locked position.
Attaching the XLR handle unit (supplied)
By attaching the XLR handle
unit, up to four audio devices
can be connected to the camera
simultaneously.
1 Remove the shoe cap from the
camera and the handle shoe cap
from the XLR handle unit.
2 Slide the XLR handle unit into
the Multi Interface Shoe until
it reaches the back of the shoe.
Then, be sure to securely tighten
the screws on either side using a
coin, etc.
Screw
Screw
ILME-FX3
5-025-887-41(1)
GB
7
C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd
DTP data saved: 2020/11/06 20:15
PDF file created: 2020/11/06 20:16
GB
Setting the language and the clock
Power switch
Control wheel
Select items : ////
/
Confirm : Center button
1 Set the power switch to (On) to turn on the camera.
2 Select the desired language and then press the center of the control
wheel.
3 Make sure that [Enter] is selected on the area/date/time confirmation
screen, and then press the center of the control wheel.
4 Select the desired geographic location, set [Daylight Savings], and then
press the center.
[Daylight Savings] can be switched on/off using the top/bottom of
the control wheel.
5 Set the date format (year/month/day), and press the center.
6 Set the date and time (hour/minute/second), and press the center.
To set the date and time or geographic location again at a
later point, select MENU
(Setup) [Area/Date]
[Area/Date/Time Setting].
ILME-FX3
5-025-887-41(1)
GB
8
C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd
DTP data saved: 2020/11/06 20:15
PDF file created: 2020/11/06 20:16
Shooting
Shooting movies
MODE (Mode) button REC (Recording) button
Control wheel
6/REC (Custom 6/Recording)
button
1 Press the MODE (Mode) button, use the control wheel to select
(Movie), and then press the center.
2 Press the REC (Recording) button to start recording.
Movie recording can be started from any shooting mode in the default
setting.
3 Press the REC button again to stop recording.
Shooting still images
1
Press the MODE (Mode) button,
use the control wheel to select
the desired shooting mode, and
then press the center of the control
wheel.
Shutter button
MODE (Mode) button
Control wheel
2 Press the shutter button halfway
down to focus.
3 Press the shutter button all the way
down.
ILME-FX3
5-025-887-41(1)
GB
9
C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd
DTP data saved: 2020/11/06 20:15
PDF file created: 2020/11/06 20:16
GB
Viewing
1 Press the (Playback) button to
switch to the playback mode.
(Playback) button
Control wheel
2 Select an image with the control
wheel.
You can move to the previous image/
next image by pressing the left/right
side of the control wheel.
To start playing back a movie, press
the center button on the control
wheel.
List of MENU items
For details on menu settings on the camera, refer to the following Help
Guide URL:
https://rd1.sony.net/help/ilc/2035_menu/h_zz/
ILME-FX3
5-025-887-41(1)
GB
10
C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd
DTP data saved: 2020/11/06 20:15
PDF file created: 2020/11/06 20:16
Notes on use
Refer to “Precautions“ in the “Help Guide
as well.
Notes on handling the product
• This camera is designed to be dust-
and moisture-resistant, but is not
waterproof or dust-proof.
• Do not leave the lens exposed to a
strong light source such as sunlight.
Because of the lens’s condensing
function, doing so may cause smoke,
fire, or a malfunction inside the camera
body or the lens.
• If sunlight or other strong light enters
the camera through the lens, it may
focus inside the camera and cause
smoke or fire. Attach the lens cap when
storing the camera. When shooting
with backlighting, keep the sun
sufficiently far away from the angle
of view. Even if it is slightly away from
the angle of view, smoke or fire may
still occur.
• Do not directly expose the lens to
beams such as laser beams. That may
damage the image sensor and cause
the camera to malfunction.
• Do not look at sunlight or a strong
light source through the lens when
it is detached. This may result in
unrecoverable damage to the eyes or
cause a malfunction.
• This camera (including accessories)
has magnet(s) which may interfere
with pacemakers, programmable shunt
valves for hydrocephalus treatment, or
other medical devices. Do not place this
camera close to persons who use such
medical devices. Consult your doctor
before using this camera if you use any
such medical device.
• Increase the volume gradually. Sudden
loud noises can damage your ears. Be
especially careful when listening to
headphones.
• Do not leave the camera, the supplied
accessories, or memory cards within
the reach of infants. They may be
accidentally swallowed. If this occurs,
consult a doctor immediately.
• While the cooling fan is in operation,
be careful not to let any objects get
sucked into the fan.
Notes on the monitor
• The monitor is manufactured using
extremely high-precision technology,
and over 99.99% of the pixels
are operational for effective use.
However, there may be some small
black dots and/or bright dots (white,
red, blue or green in color) that
constantly appear on the monitor.
These are imperfections due to the
manufacturing process and do not
affect the recorded images in any way.
• If the monitor is damaged, stop using
the camera immediately. The damaged
parts may harm your hands, face, etc.
Notes on continuous shooting
During continuous shooting, the monitor
may flash between the shooting screen
and a black screen. If you keep watching
the screen in this situation, you may
experience uncomfortable symptoms
such as feeling of unwellness. If you
experience uncomfortable symptoms,
stop using the camera, and consult your
doctor as necessary.
Notes on recording for long periods of
time or recording 4K movies
• The camera body and battery may
become warm with use – this is normal.
• If the same part of your skin touches
the camera for a long period of time
while using the camera, even if the
camera does not feel hot to you, it may
cause symptoms of a low-temperature
burn such as redness or blistering.
Pay special attention in the following
situations and use a tripod, etc.
- When using the camera in a high
temperature environment
- When someone with poor circulation
or impaired skin sensation uses the
camera
- When using the camera with
[Auto Power OFF Temp.] set to [High]
ILME-FX3
5-025-887-41(1)
GB
11
C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd
DTP data saved: 2020/11/06 20:15
PDF file created: 2020/11/06 20:16
GB
Notes on using memory cards
• When recording is finished, the
memory card may become hot. This is
not a malfunction.
• If (overheating warning icon) is
displayed on the monitor, do not
remove the memory card from the
camera right away. Instead, wait for a
while after turning off the camera, and
then remove the memory card. If you
touch the memory card while it is hot,
you may drop it and the memory card
may be damaged. Be careful when
removing the memory card.
Notes on using a tripod
Use a tripod with a screw less than
5.5mm (7/32 inches) long. Otherwise,
you cannot firmly secure the camera, and
damage to the camera may occur.
Sony lenses/accessories
Using this unit with products from
other manufacturers may affect its
performance, leading to accidents or
malfunction.
Warning on copyrights
Television programs, films, videotapes,
and other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the provisions of the
copyright laws.
Notes on location information
If you upload and share an image
tagged with a location, you may
accidentally reveal the information to a
third party. To prevent third parties from
obtaining your location information,
set [Location Info Link] to [Off] before
shooting images.
Notes on discarding or transferring this
product to others
Before discarding or transferring this
product to others, be sure to perform the
following operation to protect private
information.
• Select [Setting Reset] [Initialize].
Notes on discarding or transferring a
memory card to others
Executing [Format] or [Delete] on
the camera or a computer may not
completely delete the data on the
memory card. Before transferring a
memory card to others, we recommend
that you delete the data completely using
data deletion software. When discarding
a memory card, we recommend that you
physically destroy it.
Note on network functions
When you use network functions,
unintended third parties on the network
may access the camera, depending on
the usage environment. For example,
unauthorized access to the camera may
occur in network environments to which
another network device is connected or
can connect without permission. Sony
bears no responsibility for any loss or
damage caused by connecting to such
network environments.
Note on the 5GHz band for wireless LAN
When using the wireless LAN function
outdoors, set the band to 2.4GHz
by following the procedure below.
(WW728473 only)
• MENU (Network) [Wi-Fi]
[Wi-Fi Frequency Band]
How to turn off wireless network
functions (Wi-Fi, etc.) temporarily
When you board an airplane, etc., you
can turn off all wireless network functions
temporarily using [Airplane Mode].
Notes on the XLR handle unit (supplied)
• Before connecting/disconnecting an
external microphone or device to/from
the INPUT1 or INPUT2 jack, be sure to
set the INPUT1 (LINE/MIC/MIC+48V)
or INPUT2 (LINE/MIC/MIC+48V) switch
to a position other than “MIC+48V.
Plugging/unplugging the cable into/
from the external microphone or device
while the switch is set to “MIC+48V”
may cause loud noise or a malfunction
of the device.
• While recording is in progress,
operating and handling noises from
the camera or lens may be recorded.
Touching the handle while recording
is in progress will cause noise to be
included in the recording.
ILME-FX3
5-025-887-41(1)
GB
12
C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd
DTP data saved: 2020/11/06 20:15
PDF file created: 2020/11/06 20:16
• While recording is in progress, do not
change the INPUT1 or INPUT2 switch
settings.
• If the microphone of the handle is
in proximity to a speaker, acoustic
feedback may occur. In this case, move
the handle away from the speaker to
allow the maximum distance between
the microphone and the speaker, or
lower the speaker volume.
• If dust or water droplets are present
on the surface of the microphone,
successful recording may not be
possible. Be sure to clean the
microphone surface before using the
handle.
• Turn off the camera before attaching/
removing the handle.
• When the handle is connected
to the camera and the
HANDLE AUDIO ON/OFF switch is set
to ON, the internal microphone of the
camera cannot record audio input.
• When attaching the handle to the
camera, fasten the two handle-
attachment screws securely.
• Using the handle without fastening
the handle-attachment screws may
damage the Multi Interface Shoe
terminal or cause the handle to fall off.
Power Cord
For the customers in the UK, Ireland,
Malta, Cyprus and Saudi Arabia
Use the power cord (A).
For safety reasons, the power cord (B) is
not intended for above countries/regions
and shall therefore not be used there.
For the customers in other EU
countries/regions
Use the power cord (B).
(A) (B)
For Customers in the U.S.A.
For question regarding your product or
for the Sony Service Center nearest you,
call 1-800-222-SONY (7669) .
Supplier’s Declaration of Conformity
Trade Name : SONY
Model : WW728473
Responsible Party : Sony Electronics Inc.
Address : 16535 Via Esprillo, San Diego,
CA 92127 U.S.A.
Telephone Number : 858-942-2230
This device complies with part 15 of
the FCC rules. Operation is subject
to the following two conditions: (1)
This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
Specifications
Camera
[System]
Camera Type: Interchangeable Lens
Digital Camera
Lens: Sony E-mount lens
[Image sensor]
Image format: 35mm full frame
(35.6mm × 23.8mm), CMOS image
sensor
Effective pixel number of camera:
Approx. 12100000 pixels
Total pixel number of camera:
Approx. 12900000 pixels
[Monitor]
7.5 cm (3.0 type) TFT drive, touch
panel
ILME-FX3
5-025-887-41(1)
GB
13
C:\Users\gotanda\Desktop\5025887411_GBbook\5025887411ILMEFX3CEC\01GB-ILMEFX3CEC\01GB.indd
DTP data saved: 2020/11/06 20:15
PDF file created: 2020/11/06 20:16
GB
[General]
Rated input: 7.2V
, 7.3W
(during movie recording)
Operating temperature:
0 to 40°C (32 to 104°F)
Storage temperature:
–20 to 55°C (–4 to 131°F)
Dimensions (W/H/D) (Approx.):
129.7 × 77.8 × 84.5mm
51/8 × 31/8 × 33/8in.
Mass (Approx.):
715g (1lb 9.3oz) (including battery
pack, SD card)
[Wireless LAN]
WW728473 (see name plate on the
bottom of camera)
Supported format:
IEEE802.11a/b/g/n/ac
Frequency band: 2.4GHz/5GHz
Security: WEP/WPA-PSK/WPA2-PSK
Connection method:
Wi-Fi Protected Setup™ (WPS)/
Manual
Access method: Infrastructure mode
WW558244 (see name plate on the
bottom of camera)
Supported format: IEEE 802.11 b/g/n
Frequency band: 2.4 GHz
Security: WEP/WPA-PSK/WPA2-PSK
Connection method:
Wi-Fi Protected Setup™ (WPS)/
Manual
Access method: Infrastructure mode
XLR handle unit
Mass (Approx.): 300 g (10.6 oz)
Battery charger BC-QZ1
Rated input:
100- 240V
, 50/60Hz, 0.38A
Rated output: 8.4V , 1.6A
Rechargeable battery pack
NP-FZ100
Rated voltage: 7.2V
Design and specifications are subject
to change without notice.
Trademarks
• XAVC S and are registered
trademarks of Sony Corporation.
• XAVC HS and are registered
trademarks of Sony Corporation.
• USB Type-C® and USB-C®
are registered trademarks of
USB Implementers Forum.
• Android and Google Play are
trademarks or registered trademarks of
Google LLC.
• Wi-Fi, the Wi-Fi logo and
Wi-Fi Protected Setup are registered
trademarks or trademarks of the
Wi-Fi Alliance.
• QR Code is a trademark of
Denso Wave Inc.
• In addition, system and product names
used in this manual are, in general,
trademarks or registered trademarks
of their respective developers or
manufacturers. However, the ™ or 
marks may not be used in all cases in
this manual.
Additional information on this
product and answers to frequently
asked questions can be found at our
Customer Support Website.
ILME-FX3
5-025-887-41(1)
FR
2
\\Win-473\camera\CX95900(ALCIN)_SG\Multi\04_Compose\5025887411_14lang\5025887411ILMEFX3CEC\02FR-ILMEFX3CEC\02FR.indd
DTP data saved: 2020/11/05 11:31
PDF file created: 2020/11/06 13:23
Français
À propos du manuel pour cet
appareil
Ce guide décrit les préparatifs nécessaires pour commencer à utiliser le
produit, les fonctions de base, etc. Pour plus d’informations, consultez le
«Guide d’aide» (manuel en ligne).
https://rd1.sony.net/help/ilc/2035/h_zz/
«Guide d’aide» (Manuel en ligne)
ILME-FX3 Guide d’aide
ILME-FX3
5-025-887-41(1)
FR
3
\\Win-473\camera\CX95900(ALCIN)_SG\Multi\04_Compose\5025887411_14lang\5025887411ILMEFX3CEC\02FR-ILMEFX3CEC\02FR.indd
DTP data saved: 2020/11/05 11:31
PDF file created: 2020/11/06 13:23
FR
Préparatifs
Vérification des éléments fournis
Le nombre indiqué entre parenthèses correspond au nombre d’éléments
fournis.
Appareil photo (1)
Chargeur de batterie (1)
Cordon d’alimentation (1)* (fourni
dans certains pays/régions)
* Plusieurs cordons d’alimentation
peuvent être fournis avec cet
équipement. Utilisez le cordon
approprié qui correspond à votre
pays ou région. Voir «Remarques
sur l’utilisation».
Batterie rechargeable NP-FZ100
(1)
Câble USB Type-C® (1)
Poignée XLR (1)
Trousse de griffe porte-accessoire
(1)
Capuchon de boîtier (1) (fixé à
l’appareil photo)
Capuchon de la griffe (1) (fixé à
l’appareil photo)
Cache de la griffe de la poignée
(1) (fixé sur la poignée)
Guide de démarrage (ce manuel)
(1)
Guide de référence (1)
Identification des pièces
Pour en savoir plus sur l’identification des pièces, consultez l’URL du Guide
d’aide suivante:
https://rd1.sony.net/help/ilc/2035_parts/h_zz/
ILME-FX3
5-025-887-41(1)
FR
4
\\Win-473\camera\CX95900(ALCIN)_SG\Multi\04_Compose\5025887411_14lang\5025887411ILMEFX3CEC\02FR-ILMEFX3CEC\02FR.indd
DTP data saved: 2020/11/05 11:31
PDF file created: 2020/11/06 13:23
Préparation de la batterie
1 Insérez la batterie dans le chargeur
de batterie et branchez-la à une
prise murale à l’aide du cordon
d’alimentation (fourni).
Insérez la batterie sur le chargeur
de batterie dans le sens de . Faites
glisser la batterie à fond dans la
direction de la flèche.
Lorsque la charge commence, le
témoin CHARGE s’allume sur le
chargeur de batterie. Lorsque la
batterie est chargée, le témoin
CHARGE et tous les autres témoins
s’éteignent.
Témoin CHARGE
Vers la prise
murale
2 Insérez la batterie dans l’appareil.
Ouvrez le couvercle du
compartiment de la batterie, puis
insérez la batterie tout en appuyant
sur le levier de verrouillage.
Levier de verrouillage
ILME-FX3
5-025-887-41(1)
FR
5
\\Win-473\camera\CX95900(ALCIN)_SG\Multi\04_Compose\5025887411_14lang\5025887411ILMEFX3CEC\02FR-ILMEFX3CEC\02FR.indd
DTP data saved: 2020/11/05 11:31
PDF file created: 2020/11/06 13:23
FR
Insertion d’une carte mémoire dans l’appareil photo
Vous pouvez utiliser les cartes mémoire CFexpress Type A et les cartes
mémoire SD avec cet appareil.
Fente 1 Fente 2
Ouvrez le couvercle de carte mémoire et insérez la carte mémoire
dans la fente 1.
La fente 1 et la fente 2 acceptent toutes deux les cartes mémoire
CFexpress Type A et les cartes mémoire SD.
Insérez une carte mémoire CFexpress Type A avec l’étiquette tournée
vers l’écran, et une carte mémoire SD avec le connecteur tourné vers
l’écran. Insérez la carte jusqu’au clic d’enclenchement.
Vous pouvez changer la fente de carte mémoire utilisée en
sélectionnant MENU
(Prise de vue) [Support]
[
Réglag. supp. enr.] [Prior. support d'enr.]. La fente 1 est utilisée
par défaut.
Astuce
• Lorsque vous utilisez une carte mémoire pour la première fois avec cet appareil,
nous vous recommandons de la formater avec l’appareil, afin de garantir une
performance stable de la carte mémoire.
ILME-FX3
5-025-887-41(1)
FR
6
\\Win-473\camera\CX95900(ALCIN)_SG\Multi\04_Compose\5025887411_14lang\5025887411ILMEFX3CEC\02FR-ILMEFX3CEC\02FR.indd
DTP data saved: 2020/11/05 11:31
PDF file created: 2020/11/06 13:23
Fixation d’un objectif
Repères de montage
1 Retirez le capuchon de boîtier de l’appareil et le capuchon d’objectif
arrière de l’arrière de l’objectif.
2 Installez l’objectif en alignant le repère blanc de l’objectif et celui de
l’appareil photo (repères de montage).
3 Tout en poussant doucement l’objectif vers l’appareil, tournez
lentement l’objectif dans le sens de la flèche jusqu’à ce qu’il s’enclenche
en position verrouillée.
Fixation de la poignée XLR (fourni)
En fixant la poignée XLR, vous pouvez
raccorder simultanément jusqu’à
quatre périphériques audio à l’appareil.
1 Retirez le capuchon de la griffe de
l’appareil et le cache de la griffe de
la poignée XLR.
2 Faites glisser la poignée XLR dans
la griffe multi-interface jusqu’à ce
qu’elle atteigne l’arrière de la griffe.
Ensuite, assurez-vous que les vis
sont bien serrées de chaque côté à
l’aide d’une pièce de monnaie, etc.
Vis
Vis
ILME-FX3
5-025-887-41(1)
FR
7
\\Win-473\camera\CX95900(ALCIN)_SG\Multi\04_Compose\5025887411_14lang\5025887411ILMEFX3CEC\02FR-ILMEFX3CEC\02FR.indd
DTP data saved: 2020/11/05 11:31
PDF file created: 2020/11/06 13:23
FR
Réglage de la langue et de l’horloge
Interrupteur d’alimentation
Molette de commande
Pour sélectionner des éléments:
////
/
Pour confirmer: Bouton central
1 Placez l’interrupteur d’alimentation sur «» (activé) pour allumer
l’appareil.
2 Sélectionnez la langue souhaitée et appuyez au centre de la molette de
commande.
3 Assurez-vous que [Entrer] est sélectionné sur l’écran de confirmation
de la zone/date/heure, puis appuyez au centre de la molette de
commande.
4 Sélectionnez l’emplacement géographique souhaité, réglez
[Heure d'été], puis appuyez au centre.
[Heure d'été] peut être activé/désactivé en appuyant sur le côté
supérieur/inférieur de la molette de commande.
5 Réglez le format de la date (année/mois/jour), puis appuyez au centre.
6 Réglez la date et l’heure (heure/minute/seconde), puis appuyez au
centre.
Pour régler à nouveau la date et l’heure ou l’emplacement
géographique ultérieurement, sélectionnez MENU
(Réglage)
[Zone/date] [Réglag. zone/date/h].
ILME-FX3
5-025-887-41(1)
FR
8
\\Win-473\camera\CX95900(ALCIN)_SG\Multi\04_Compose\5025887411_14lang\5025887411ILMEFX3CEC\02FR-ILMEFX3CEC\02FR.indd
DTP data saved: 2020/11/05 11:31
PDF file created: 2020/11/06 13:23
Prise de vue
Enregistrement de films
Bouton MODE (Mode) Bouton REC (Enregistrement)
Molette de commande
Bouton 6/REC
(Personnalisée 6/Enregistrement)
1 Appuyez sur le bouton MODE (Mode) et utilisez la molette de
commande pour sélectionner (Film), puis appuyez au centre.
2 Appuyez sur le bouton REC (Enregistrement) pour commencer l’enregistrement.
Lenregistrement de films peut être lancé depuis n’importe quel mode de
prise de vue par défaut.
3 Appuyez à nouveau sur le bouton REC pour arrêter l’enregistrement.
Prise d’images fixes
1
Appuyez sur le bouton MODE
(Mode) et utilisez la molette de
commande pour sélectionner le
mode de prise de vue souhaité, puis
appuyez au centre la molette de
commande.
Déclencheur
Bouton MODE (Mode)
Molette de commande
2 Enfoncez le déclencheur à mi-course
pour effectuer la mise au point.
3 Enfoncez complètement le
déclencheur.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179

Sony FX Series User ILME FX3 Mode d'emploi

Taper
Mode d'emploi
Ce manuel convient également à